Revision 8:e9248126f512, committed 2021-02-26

Comitter:

morgandu

Date:

Fri Feb 26 06:30:37 2021 +0000

Parent:

7:cbb5a2a2a0d2

Commit message:

Fix code to compliant Mbed OS 6 but still set to Mbed OS 5 as default.; Remove BufferedSerial library if switch to Mbed OS 6 before compile.

Changed in this revision

diff -r cbb5a2a2a0d2 -r e9248126f512 BufferedSerial.lib
--- a/BufferedSerial.lib	Wed Feb 26 07:55:51 2020 +0000
+++ b/BufferedSerial.lib	Fri Feb 26 06:30:37 2021 +0000
@@ -1,1 +1,1 @@
-http://mbed.org/users/sam_grove/code/BufferedSerial/#7e5e866edd3d
+https://os.mbed.com/users/sam_grove/code/BufferedSerial/#7e5e866edd3d

diff -r cbb5a2a2a0d2 -r e9248126f512 NuMaker-mbed-SD-driver.lib
--- a/NuMaker-mbed-SD-driver.lib	Wed Feb 26 07:55:51 2020 +0000
+++ b/NuMaker-mbed-SD-driver.lib	Fri Feb 26 06:30:37 2021 +0000
@@ -1,1 +1,1 @@
-https://github.com/OpenNuvoton/NuMaker-mbed-SD-driver/#56406071a4468a8302c0717a4467a241d152ade2
+https://github.com/OpenNuvoton/NuMaker-mbed-SD-driver/#8027c2c886a6bb2d850d3121ec3e2e179450e41c

diff -r cbb5a2a2a0d2 -r e9248126f512 README.md
--- a/README.md	Wed Feb 26 07:55:51 2020 +0000
+++ b/README.md	Fri Feb 26 06:30:37 2021 +0000
@@ -23,6 +23,11 @@
 
 ## Configuration
 
+* Mbed OS version
+
+The template set Mbed OS 5 as defalut but it has been updated for Mbed OS 6.
+Because BufferedSerial has built in Mbed OS 6, the BufferedSerial library in the template has to be removed if you switch Mbed OS to version 6 to avoid conflict.
+
 * Following configurations are set in ste_config.h
 
 ENABLE_WEB_CONFIG

diff -r cbb5a2a2a0d2 -r e9248126f512 main.cpp
--- a/main.cpp	Wed Feb 26 07:55:51 2020 +0000
+++ b/main.cpp	Fri Feb 26 06:30:37 2021 +0000
@@ -5,10 +5,8 @@
  * 
  *
  */
- 
 #include "ste_config.h"
 
-
 /* If choose static IP, specify the default IP address here. */
 #if 0
     // private IP address for general purpose
@@ -27,14 +25,26 @@
 S_NET_CONFIG net_config = {IP_STATIC_MODE, IP_ADDRESS, NETWORK_MASK, GATEWAY_ADDRESS};
 
 #if defined (TARGET_NUMAKER_PFM_M487) || defined(TARGET_NUMAKER_IOT_M487)
+#if MBED_MAJOR_VERSION <= 5
 BufferedSerial serial_0(PB_3, PB_2, 256, 4);    // UART1
 BufferedSerial serial_1(PA_5, PA_4, 256, 4);    // UART5
 //BufferedSerial serial_2(PB_13, PB_12, 256, 4);  // UART0, Debug
+#else
+BufferedSerial serial_0(PB_3, PB_2);    // UART1
+BufferedSerial serial_1(PA_5, PA_4);    // UART5
+//BufferedSerial serial_2(PB_13, PB_12);  // UART0, Debug
+#endif
 
 #elif defined (TARGET_NUMAKER_PFM_NUC472)
+#if MBED_MAJOR_VERSION <= 5
 BufferedSerial serial_0(PH_1, PH_0, 256, 4);    // UART4
 BufferedSerial serial_1(PG_2, PG_1, 256, 4);    // UART0
 BufferedSerial serial_2(PC_11, PC_10, 256, 4);  // UART2
+#else
+BufferedSerial serial_0(PH_1, PH_0);    // UART4
+BufferedSerial serial_1(PG_2, PG_1);    // UART0
+BufferedSerial serial_2(PC_11, PC_10);  // UART2
+#endif
 
 #elif defined (TARGET_NUMAKER_PFM_M453) || defined(TARGET_NUMAKER_PFM_NANO130) || defined(TARGET_NUMAKER_PFM_M2351)
 #error The board has no Ethernet.
@@ -123,8 +133,17 @@
         /*** Serial to Network ***/
 
         // try to get more data from serial port
+#if MBED_MAJOR_VERSION <= 5        
         for(; s_index < sizeof(s_buf) && pmap->pserial->readable(); s_index++)
             s_buf[s_index] = pmap->pserial->getc();
+#else
+        if (pmap->pserial->readable())
+        {
+            s_len = pmap->pserial->read(s_buf+s_index, sizeof(s_buf)-s_index);
+            if (s_len > 0)
+                s_index += s_len;
+        }
+#endif
         
         if (s_index >= 240 || (s_index != 0 && ++eth_tx_count >= 5))
         {
@@ -162,7 +181,7 @@
 
     printf("Thread %x in TCP client mode.\r\n", (unsigned int)pmap);
 
-    if ((err=socket.open(&eth)) < 0)
+    if ((err=socket.open(&eth)) != NSAPI_ERROR_OK)
     {
         printf("TCP socket can't open (%d)(%x).\r\n", err, (unsigned int)pmap);
         return;
@@ -194,12 +213,12 @@
     
     printf("Thread %x in TCP server mode.\r\n", (unsigned int)pmap);
     
-    if ((err=tcp_server.open(&eth)) < 0)
+    if ((err=tcp_server.open(&eth)) != NSAPI_ERROR_OK)
     {
         printf("TCP server can't open (%d)(%x).\r\n", err, (unsigned int)pmap);
         return;
     }
-    if ((err=tcp_server.bind(pmap->port)) < 0)
+    if ((err=tcp_server.bind(pmap->port)) != NSAPI_ERROR_OK)
     {
         printf("TCP server can't bind address and port (%d)(%x).\r\n", err, (unsigned int)pmap);
         return;
@@ -213,7 +232,7 @@
     while(1)
     {   
         client_socket = tcp_server.accept(&err);
-        if (err < 0) // && err != NSAPI_ERROR_WOULD_BLOCK)
+        if (err != NSAPI_ERROR_OK && err != NSAPI_ERROR_WOULD_BLOCK)
         {
             printf("TCP server fail to accept connection (%d)(%x).\r\n", err, (unsigned int)pmap);
             return;
@@ -295,8 +314,13 @@
     printf("Configure UART ports...\r\n");
     for(int i=0; i<MAX_UART_PORTS; i++)
     {
+#if MBED_MAJOR_VERSION <= 5
         port_config[i].pserial->baud(port_config[i].baud);
         port_config[i].pserial->format(port_config[i].data, port_config[i].parity, port_config[i].stop);
+#else
+        port_config[i].pserial->set_baud(port_config[i].baud);
+        port_config[i].pserial->set_format(port_config[i].data, port_config[i].parity, port_config[i].stop);
+#endif        
     }
     
     /* Configure network IP address */

diff -r cbb5a2a2a0d2 -r e9248126f512 mbed-os.lib
--- a/mbed-os.lib	Wed Feb 26 07:55:51 2020 +0000
+++ b/mbed-os.lib	Fri Feb 26 06:30:37 2021 +0000
@@ -1,1 +1,1 @@
-https://github.com/ARMmbed/mbed-os/#c12b433026beae5b3b769c27941bc6d7fe5d4b27
+https://github.com/ARMmbed/mbed-os/#b114a9c878519d6489ac3426697196bbea34c8ea

diff -r cbb5a2a2a0d2 -r e9248126f512 mbed_app.json
--- a/mbed_app.json	Wed Feb 26 07:55:51 2020 +0000
+++ b/mbed_app.json	Fri Feb 26 06:30:37 2021 +0000
@@ -12,10 +12,10 @@
         "*": {
             "platform.stdio-baud-rate"          : 115200,
             "platform.stdio-convert-newlines"   : true,
-            "lwip.socket-max": 8,
-            "lwip.tcp-socket-max": 8, 
-            "lwip.tcp-server-max": 8, 
-            "lwip.udp-socket-max": 8       
+            "lwip.socket-max"                   : 8,
+            "lwip.tcp-socket-max"               : 8, 
+            "lwip.tcp-server-max"               : 8, 
+            "lwip.udp-socket-max"               : 8       
         }
     }
 }

diff -r cbb5a2a2a0d2 -r e9248126f512 ste_config.h
--- a/ste_config.h	Wed Feb 26 07:55:51 2020 +0000
+++ b/ste_config.h	Fri Feb 26 06:30:37 2021 +0000
@@ -10,10 +10,13 @@
 
 #include "mbed.h"
 #include "EthernetInterface.h"
-#include "BufferedSerial.h"
 #include "FATFileSystem.h"
 #include "NuSDBlockDevice.h"
 
+#if MBED_MAJOR_VERSION <= 5
+#include "BufferedSerial.h"
+#endif
+
 /* A simple web server for network and UART configuration
    0: Disable the web server.
    1: Enable the web server
@@ -76,7 +79,7 @@
     unsigned short  server_port;    // Server port for TCP client mode
 } S_PORT_CONFIG;
 
-extern RawSerial output;        // for debug output
+//extern RawSerial output;        // for debug output
 extern EthernetInterface eth;
 extern S_PORT_CONFIG port_config[MAX_UART_PORTS];
 extern S_NET_CONFIG net_config;

diff -r cbb5a2a2a0d2 -r e9248126f512 uweb_server.cpp
--- a/uweb_server.cpp	Wed Feb 26 07:55:51 2020 +0000
+++ b/uweb_server.cpp	Fri Feb 26 06:30:37 2021 +0000
@@ -504,7 +504,7 @@
 
     if (http_server.open(&eth) < 0)
     {
-        printf("http server can't open.\r\n");
+        printf("http server can't be created.\r\n");
         return;
     }
     if (http_server.bind(80) < 0)