mbed library sources
Fork of mbed-src by
targets/cmsis/TARGET_STM/TARGET_STM32F0/stm32f0xx_hal_comp.c@441:d2c15dda23c1, 2015-01-06 (annotated)
- Committer:
- mbed_official
- Date:
- Tue Jan 06 16:15:36 2015 +0000
- Revision:
- 441:d2c15dda23c1
- Parent:
- 392:2b59412bb664
Synchronized with git revision 245a60b29caabb42eabdd19658eeac7c3f68313b
Full URL: https://github.com/mbedmicro/mbed/commit/245a60b29caabb42eabdd19658eeac7c3f68313b/
NUCLEO_F072RB/F091RC - adding target to rtos lib and exporter for coide and gcc_arm
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
mbed_official | 340:28d1f895c6fe | 1 | /** |
mbed_official | 340:28d1f895c6fe | 2 | ****************************************************************************** |
mbed_official | 340:28d1f895c6fe | 3 | * @file stm32f0xx_hal_comp.c |
mbed_official | 340:28d1f895c6fe | 4 | * @author MCD Application Team |
mbed_official | 441:d2c15dda23c1 | 5 | * @version V1.2.0 |
mbed_official | 441:d2c15dda23c1 | 6 | * @date 11-December-2014 |
mbed_official | 340:28d1f895c6fe | 7 | * @brief COMP HAL module driver. |
mbed_official | 340:28d1f895c6fe | 8 | * This file provides firmware functions to manage the following |
mbed_official | 340:28d1f895c6fe | 9 | * functionalities of the COMP peripheral: |
mbed_official | 340:28d1f895c6fe | 10 | * + Initialization/de-initialization functions |
mbed_official | 340:28d1f895c6fe | 11 | * + I/O operation functions |
mbed_official | 340:28d1f895c6fe | 12 | * + Peripheral Control functions |
mbed_official | 340:28d1f895c6fe | 13 | * + Peripheral State functions |
mbed_official | 340:28d1f895c6fe | 14 | * |
mbed_official | 340:28d1f895c6fe | 15 | @verbatim |
mbed_official | 340:28d1f895c6fe | 16 | ================================================================================ |
mbed_official | 340:28d1f895c6fe | 17 | ##### COMP Peripheral features ##### |
mbed_official | 340:28d1f895c6fe | 18 | ================================================================================ |
mbed_official | 340:28d1f895c6fe | 19 | |
mbed_official | 340:28d1f895c6fe | 20 | [..] |
mbed_official | 340:28d1f895c6fe | 21 | The STM32F0xx device family integrates up to 2 analog comparators COMP1 and COMP2: |
mbed_official | 340:28d1f895c6fe | 22 | (#) The non inverting input and inverting input can be set to GPIO pins |
mbed_official | 340:28d1f895c6fe | 23 | as shown in table1. COMP Inputs below. |
mbed_official | 340:28d1f895c6fe | 24 | |
mbed_official | 340:28d1f895c6fe | 25 | (#) The COMP output is available using HAL_COMP_GetOutputLevel() |
mbed_official | 340:28d1f895c6fe | 26 | and can be set on GPIO pins. Refer to table 2. COMP Outputs below. |
mbed_official | 340:28d1f895c6fe | 27 | |
mbed_official | 340:28d1f895c6fe | 28 | (#) The COMP output can be redirected to embedded timers (TIM1, TIM2 and TIM3) |
mbed_official | 340:28d1f895c6fe | 29 | Refer to table 3. COMP Outputs redirection to embedded timers below. |
mbed_official | 340:28d1f895c6fe | 30 | |
mbed_official | 340:28d1f895c6fe | 31 | (#) The comparators COMP1 and COMP2 can be combined in window mode. |
mbed_official | 340:28d1f895c6fe | 32 | |
mbed_official | 340:28d1f895c6fe | 33 | (#) The comparators have interrupt capability with wake-up |
mbed_official | 340:28d1f895c6fe | 34 | from Sleep and Stop modes (through the EXTI controller): |
mbed_official | 340:28d1f895c6fe | 35 | (++) COMP1 is internally connected to EXTI Line 21 |
mbed_official | 340:28d1f895c6fe | 36 | (++) COMP2 is internally connected to EXTI Line 22 |
mbed_official | 340:28d1f895c6fe | 37 | From the corresponding IRQ handler, the right interrupt source can be retrieved with the |
mbed_official | 340:28d1f895c6fe | 38 | macro __HAL_COMP_EXTI_GET_FLAG(). Possible values are: |
mbed_official | 340:28d1f895c6fe | 39 | (++) COMP_EXTI_LINE_COMP1_EVENT |
mbed_official | 340:28d1f895c6fe | 40 | (++) COMP_EXTI_LINE_COMP2_EVENT |
mbed_official | 340:28d1f895c6fe | 41 | |
mbed_official | 340:28d1f895c6fe | 42 | |
mbed_official | 441:d2c15dda23c1 | 43 | [..] Table 1. COMP Inputs for the STM32F05x, STM32F07x and STM32F09x devices |
mbed_official | 340:28d1f895c6fe | 44 | +--------------------------------------------------+ |
mbed_official | 340:28d1f895c6fe | 45 | | | | COMP1 | COMP2 | |
mbed_official | 340:28d1f895c6fe | 46 | |-----------------|----------------|---------------| |
mbed_official | 340:28d1f895c6fe | 47 | | | 1/4 VREFINT | OK | OK | |
mbed_official | 340:28d1f895c6fe | 48 | | | 1/2 VREFINT | OK | OK | |
mbed_official | 340:28d1f895c6fe | 49 | | | 3/4 VREFINT | OK | OK | |
mbed_official | 340:28d1f895c6fe | 50 | | Inverting Input | VREFINT | OK | OK | |
mbed_official | 340:28d1f895c6fe | 51 | | | DAC1 OUT (PA4) | OK | OK | |
mbed_official | 340:28d1f895c6fe | 52 | | | DAC2 OUT (PA5) | OK | OK | |
mbed_official | 340:28d1f895c6fe | 53 | | | IO1 | PA0 | PA2 | |
mbed_official | 340:28d1f895c6fe | 54 | |-----------------|----------------|-------|-------| |
mbed_official | 340:28d1f895c6fe | 55 | | Non Inverting | | PA1 | PA3 | |
mbed_official | 340:28d1f895c6fe | 56 | | Input | | | | |
mbed_official | 340:28d1f895c6fe | 57 | +--------------------------------------------------+ |
mbed_official | 340:28d1f895c6fe | 58 | |
mbed_official | 441:d2c15dda23c1 | 59 | [..] Table 2. COMP Outputs for the STM32F05x, STM32F07x and STM32F09x devices |
mbed_official | 340:28d1f895c6fe | 60 | +---------------+ |
mbed_official | 340:28d1f895c6fe | 61 | | COMP1 | COMP2 | |
mbed_official | 340:28d1f895c6fe | 62 | |-------|-------| |
mbed_official | 340:28d1f895c6fe | 63 | | PA0 | PA2 | |
mbed_official | 340:28d1f895c6fe | 64 | | PA6 | PA7 | |
mbed_official | 340:28d1f895c6fe | 65 | | PA11 | PA12 | |
mbed_official | 340:28d1f895c6fe | 66 | +---------------+ |
mbed_official | 340:28d1f895c6fe | 67 | |
mbed_official | 441:d2c15dda23c1 | 68 | [..] Table 3. COMP Outputs redirection to embedded timers for the STM32F05x, STM32F07x and STM32F09x devices |
mbed_official | 340:28d1f895c6fe | 69 | +---------------------------------+ |
mbed_official | 340:28d1f895c6fe | 70 | | COMP1 | COMP2 | |
mbed_official | 340:28d1f895c6fe | 71 | |----------------|----------------| |
mbed_official | 340:28d1f895c6fe | 72 | | TIM1 BKIN | TIM1 BKIN | |
mbed_official | 340:28d1f895c6fe | 73 | | | | |
mbed_official | 340:28d1f895c6fe | 74 | | TIM1 OCREFCLR | TIM1 OCREFCLR | |
mbed_official | 340:28d1f895c6fe | 75 | | | | |
mbed_official | 340:28d1f895c6fe | 76 | | TIM1 IC1 | TIM1 IC1 | |
mbed_official | 340:28d1f895c6fe | 77 | | | | |
mbed_official | 340:28d1f895c6fe | 78 | | TIM2 IC4 | TIM2 IC4 | |
mbed_official | 340:28d1f895c6fe | 79 | | | | |
mbed_official | 340:28d1f895c6fe | 80 | | TIM2 OCREFCLR | TIM2 OCREFCLR | |
mbed_official | 340:28d1f895c6fe | 81 | | | | |
mbed_official | 340:28d1f895c6fe | 82 | | TIM3 IC1 | TIM3 IC1 | |
mbed_official | 340:28d1f895c6fe | 83 | | | | |
mbed_official | 340:28d1f895c6fe | 84 | | TIM3 OCREFCLR | TIM3 OCREFCLR | |
mbed_official | 340:28d1f895c6fe | 85 | +---------------------------------+ |
mbed_official | 340:28d1f895c6fe | 86 | |
mbed_official | 340:28d1f895c6fe | 87 | ##### How to use this driver ##### |
mbed_official | 340:28d1f895c6fe | 88 | ================================================================================ |
mbed_official | 340:28d1f895c6fe | 89 | [..] |
mbed_official | 441:d2c15dda23c1 | 90 | This driver provides functions to configure and program the Comparators of STM32F05x, STM32F07x and STM32F09x devices. |
mbed_official | 340:28d1f895c6fe | 91 | |
mbed_official | 340:28d1f895c6fe | 92 | To use the comparator, perform the following steps: |
mbed_official | 340:28d1f895c6fe | 93 | |
mbed_official | 340:28d1f895c6fe | 94 | (#) Fill in the HAL_COMP_MspInit() to |
mbed_official | 340:28d1f895c6fe | 95 | (++) Configure the comparator input in analog mode using HAL_GPIO_Init() |
mbed_official | 340:28d1f895c6fe | 96 | (++) Configure the comparator output in alternate function mode using HAL_GPIO_Init() to map the comparator |
mbed_official | 340:28d1f895c6fe | 97 | output to the GPIO pin |
mbed_official | 340:28d1f895c6fe | 98 | (++) If required enable the COMP interrupt by configuring and enabling EXTI line in Interrupt mode and |
mbed_official | 340:28d1f895c6fe | 99 | selecting the desired sensitivity level using HAL_GPIO_Init() function. After that enable the comparator |
mbed_official | 340:28d1f895c6fe | 100 | interrupt vector using HAL_NVIC_EnableIRQ() function. |
mbed_official | 340:28d1f895c6fe | 101 | |
mbed_official | 340:28d1f895c6fe | 102 | (#) Configure the comparator using HAL_COMP_Init() function: |
mbed_official | 340:28d1f895c6fe | 103 | (++) Select the inverting input |
mbed_official | 340:28d1f895c6fe | 104 | (++) Select the non inverting input |
mbed_official | 340:28d1f895c6fe | 105 | (++) Select the output polarity |
mbed_official | 340:28d1f895c6fe | 106 | (++) Select the output redirection |
mbed_official | 340:28d1f895c6fe | 107 | (++) Select the hysteresis level |
mbed_official | 340:28d1f895c6fe | 108 | (++) Select the power mode |
mbed_official | 340:28d1f895c6fe | 109 | (++) Select the event/interrupt mode |
mbed_official | 340:28d1f895c6fe | 110 | |
mbed_official | 340:28d1f895c6fe | 111 | (#) Enable the comparator using HAL_COMP_Start() function or HAL_COMP_Start_IT() function for interrupt mode |
mbed_official | 340:28d1f895c6fe | 112 | |
mbed_official | 340:28d1f895c6fe | 113 | (#) Read the comparator output level with HAL_COMP_GetOutputLevel() |
mbed_official | 340:28d1f895c6fe | 114 | |
mbed_official | 340:28d1f895c6fe | 115 | @endverbatim |
mbed_official | 340:28d1f895c6fe | 116 | ****************************************************************************** |
mbed_official | 340:28d1f895c6fe | 117 | * @attention |
mbed_official | 340:28d1f895c6fe | 118 | * |
mbed_official | 340:28d1f895c6fe | 119 | * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2> |
mbed_official | 340:28d1f895c6fe | 120 | * |
mbed_official | 340:28d1f895c6fe | 121 | * Redistribution and use in source and binary forms, with or without modification, |
mbed_official | 340:28d1f895c6fe | 122 | * are permitted provided that the following conditions are met: |
mbed_official | 340:28d1f895c6fe | 123 | * 1. Redistributions of source code must retain the above copyright notice, |
mbed_official | 340:28d1f895c6fe | 124 | * this list of conditions and the following disclaimer. |
mbed_official | 340:28d1f895c6fe | 125 | * 2. Redistributions in binary form must reproduce the above copyright notice, |
mbed_official | 340:28d1f895c6fe | 126 | * this list of conditions and the following disclaimer in the documentation |
mbed_official | 340:28d1f895c6fe | 127 | * and/or other materials provided with the distribution. |
mbed_official | 340:28d1f895c6fe | 128 | * 3. Neither the name of STMicroelectronics nor the names of its contributors |
mbed_official | 340:28d1f895c6fe | 129 | * may be used to endorse or promote products derived from this software |
mbed_official | 340:28d1f895c6fe | 130 | * without specific prior written permission. |
mbed_official | 340:28d1f895c6fe | 131 | * |
mbed_official | 340:28d1f895c6fe | 132 | * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
mbed_official | 340:28d1f895c6fe | 133 | * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
mbed_official | 340:28d1f895c6fe | 134 | * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
mbed_official | 340:28d1f895c6fe | 135 | * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE |
mbed_official | 340:28d1f895c6fe | 136 | * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
mbed_official | 340:28d1f895c6fe | 137 | * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR |
mbed_official | 340:28d1f895c6fe | 138 | * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER |
mbed_official | 340:28d1f895c6fe | 139 | * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, |
mbed_official | 340:28d1f895c6fe | 140 | * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
mbed_official | 340:28d1f895c6fe | 141 | * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
mbed_official | 340:28d1f895c6fe | 142 | * |
mbed_official | 340:28d1f895c6fe | 143 | ****************************************************************************** |
mbed_official | 340:28d1f895c6fe | 144 | */ |
mbed_official | 340:28d1f895c6fe | 145 | |
mbed_official | 441:d2c15dda23c1 | 146 | /* Includes ------------------------------------------------------------------*/ |
mbed_official | 441:d2c15dda23c1 | 147 | #include "stm32f0xx_hal.h" |
mbed_official | 441:d2c15dda23c1 | 148 | |
mbed_official | 441:d2c15dda23c1 | 149 | #ifdef HAL_COMP_MODULE_ENABLED |
mbed_official | 441:d2c15dda23c1 | 150 | |
mbed_official | 340:28d1f895c6fe | 151 | #if defined(STM32F051x8) || defined(STM32F058xx) || \ |
mbed_official | 340:28d1f895c6fe | 152 | defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \ |
mbed_official | 340:28d1f895c6fe | 153 | defined(STM32F091xC) || defined (STM32F098xx) |
mbed_official | 340:28d1f895c6fe | 154 | |
mbed_official | 340:28d1f895c6fe | 155 | /** @addtogroup STM32F0xx_HAL_Driver |
mbed_official | 340:28d1f895c6fe | 156 | * @{ |
mbed_official | 340:28d1f895c6fe | 157 | */ |
mbed_official | 340:28d1f895c6fe | 158 | |
mbed_official | 340:28d1f895c6fe | 159 | /** @defgroup COMP COMP HAL Module Driver |
mbed_official | 340:28d1f895c6fe | 160 | * @brief COMP HAL module driver |
mbed_official | 340:28d1f895c6fe | 161 | * @{ |
mbed_official | 340:28d1f895c6fe | 162 | */ |
mbed_official | 340:28d1f895c6fe | 163 | |
mbed_official | 340:28d1f895c6fe | 164 | /* Private typedef -----------------------------------------------------------*/ |
mbed_official | 340:28d1f895c6fe | 165 | /* Private define ------------------------------------------------------------*/ |
mbed_official | 340:28d1f895c6fe | 166 | /** @defgroup COMP_Private_Constants COMP Private Constants |
mbed_official | 340:28d1f895c6fe | 167 | * @{ |
mbed_official | 340:28d1f895c6fe | 168 | */ |
mbed_official | 340:28d1f895c6fe | 169 | /* CSR register reset value */ |
mbed_official | 340:28d1f895c6fe | 170 | #define COMP_CSR_RESET_VALUE ((uint32_t)0x00000000) |
mbed_official | 340:28d1f895c6fe | 171 | /* CSR register masks */ |
mbed_official | 340:28d1f895c6fe | 172 | #define COMP_CSR_RESET_PARAMETERS_MASK ((uint32_t)0x00003FFF) |
mbed_official | 340:28d1f895c6fe | 173 | #define COMP_CSR_UPDATE_PARAMETERS_MASK ((uint32_t)0x00003FFE) |
mbed_official | 340:28d1f895c6fe | 174 | /* CSR COMPx non inverting input mask */ |
mbed_official | 340:28d1f895c6fe | 175 | #define COMP_CSR_COMPxNONINSEL_MASK ((uint16_t)COMP_CSR_COMP1SW1) |
mbed_official | 340:28d1f895c6fe | 176 | /* CSR COMP2 shift */ |
mbed_official | 340:28d1f895c6fe | 177 | #define COMP_CSR_COMP1_SHIFT 0U |
mbed_official | 340:28d1f895c6fe | 178 | #define COMP_CSR_COMP2_SHIFT 16U |
mbed_official | 340:28d1f895c6fe | 179 | /** |
mbed_official | 340:28d1f895c6fe | 180 | * @} |
mbed_official | 340:28d1f895c6fe | 181 | */ |
mbed_official | 340:28d1f895c6fe | 182 | /* Private macro -------------------------------------------------------------*/ |
mbed_official | 340:28d1f895c6fe | 183 | /* Private variables ---------------------------------------------------------*/ |
mbed_official | 340:28d1f895c6fe | 184 | /* Private function prototypes -----------------------------------------------*/ |
mbed_official | 340:28d1f895c6fe | 185 | /* Private functions ---------------------------------------------------------*/ |
mbed_official | 340:28d1f895c6fe | 186 | |
mbed_official | 340:28d1f895c6fe | 187 | /** @defgroup COMP_Exported_Functions COMP Exported Functions |
mbed_official | 340:28d1f895c6fe | 188 | * @{ |
mbed_official | 340:28d1f895c6fe | 189 | */ |
mbed_official | 340:28d1f895c6fe | 190 | |
mbed_official | 340:28d1f895c6fe | 191 | /** @defgroup COMP_Exported_Functions_Group1 Initialization/de-initialization functions |
mbed_official | 340:28d1f895c6fe | 192 | * @brief Initialization and Configuration functions |
mbed_official | 340:28d1f895c6fe | 193 | * |
mbed_official | 340:28d1f895c6fe | 194 | @verbatim |
mbed_official | 340:28d1f895c6fe | 195 | =============================================================================== |
mbed_official | 340:28d1f895c6fe | 196 | ##### Initialization and Configuration functions ##### |
mbed_official | 340:28d1f895c6fe | 197 | =============================================================================== |
mbed_official | 340:28d1f895c6fe | 198 | [..] This section provides functions to initialize and de-initialize comparators |
mbed_official | 340:28d1f895c6fe | 199 | |
mbed_official | 340:28d1f895c6fe | 200 | @endverbatim |
mbed_official | 340:28d1f895c6fe | 201 | * @{ |
mbed_official | 340:28d1f895c6fe | 202 | */ |
mbed_official | 340:28d1f895c6fe | 203 | |
mbed_official | 340:28d1f895c6fe | 204 | /** |
mbed_official | 340:28d1f895c6fe | 205 | * @brief Initializes the COMP according to the specified |
mbed_official | 340:28d1f895c6fe | 206 | * parameters in the COMP_InitTypeDef and create the associated handle. |
mbed_official | 340:28d1f895c6fe | 207 | * @note If the selected comparator is locked, initialization can't be performed. |
mbed_official | 340:28d1f895c6fe | 208 | * To unlock the configuration, perform a system reset. |
mbed_official | 340:28d1f895c6fe | 209 | * @param hcomp: COMP handle |
mbed_official | 340:28d1f895c6fe | 210 | * @retval HAL status |
mbed_official | 340:28d1f895c6fe | 211 | */ |
mbed_official | 340:28d1f895c6fe | 212 | HAL_StatusTypeDef HAL_COMP_Init(COMP_HandleTypeDef *hcomp) |
mbed_official | 340:28d1f895c6fe | 213 | { |
mbed_official | 340:28d1f895c6fe | 214 | HAL_StatusTypeDef status = HAL_OK; |
mbed_official | 340:28d1f895c6fe | 215 | uint32_t regshift = COMP_CSR_COMP1_SHIFT; |
mbed_official | 340:28d1f895c6fe | 216 | |
mbed_official | 340:28d1f895c6fe | 217 | /* Check the COMP handle allocation and lock status */ |
mbed_official | 441:d2c15dda23c1 | 218 | if((hcomp == NULL) || ((hcomp->State & COMP_STATE_BIT_LOCK) != RESET)) |
mbed_official | 340:28d1f895c6fe | 219 | { |
mbed_official | 340:28d1f895c6fe | 220 | status = HAL_ERROR; |
mbed_official | 340:28d1f895c6fe | 221 | } |
mbed_official | 340:28d1f895c6fe | 222 | else |
mbed_official | 340:28d1f895c6fe | 223 | { |
mbed_official | 340:28d1f895c6fe | 224 | /* Check the parameter */ |
mbed_official | 340:28d1f895c6fe | 225 | assert_param(IS_COMP_ALL_INSTANCE(hcomp->Instance)); |
mbed_official | 340:28d1f895c6fe | 226 | assert_param(IS_COMP_INVERTINGINPUT(hcomp->Init.InvertingInput)); |
mbed_official | 340:28d1f895c6fe | 227 | assert_param(IS_COMP_NONINVERTINGINPUT(hcomp->Init.NonInvertingInput)); |
mbed_official | 340:28d1f895c6fe | 228 | assert_param(IS_COMP_OUTPUT(hcomp->Init.Output)); |
mbed_official | 340:28d1f895c6fe | 229 | assert_param(IS_COMP_OUTPUTPOL(hcomp->Init.OutputPol)); |
mbed_official | 340:28d1f895c6fe | 230 | assert_param(IS_COMP_HYSTERESIS(hcomp->Init.Hysteresis)); |
mbed_official | 340:28d1f895c6fe | 231 | assert_param(IS_COMP_MODE(hcomp->Init.Mode)); |
mbed_official | 340:28d1f895c6fe | 232 | |
mbed_official | 340:28d1f895c6fe | 233 | if(hcomp->Init.NonInvertingInput == COMP_NONINVERTINGINPUT_DAC1SWITCHCLOSED) |
mbed_official | 340:28d1f895c6fe | 234 | { |
mbed_official | 340:28d1f895c6fe | 235 | assert_param(IS_COMP_DAC1SWITCH_INSTANCE(hcomp->Instance)); |
mbed_official | 340:28d1f895c6fe | 236 | } |
mbed_official | 340:28d1f895c6fe | 237 | |
mbed_official | 340:28d1f895c6fe | 238 | if(hcomp->Init.WindowMode != COMP_WINDOWMODE_DISABLED) |
mbed_official | 340:28d1f895c6fe | 239 | { |
mbed_official | 340:28d1f895c6fe | 240 | assert_param(IS_COMP_WINDOWMODE_INSTANCE(hcomp->Instance)); |
mbed_official | 340:28d1f895c6fe | 241 | } |
mbed_official | 340:28d1f895c6fe | 242 | |
mbed_official | 340:28d1f895c6fe | 243 | if(hcomp->State == HAL_COMP_STATE_RESET) |
mbed_official | 340:28d1f895c6fe | 244 | { |
mbed_official | 340:28d1f895c6fe | 245 | /* Init SYSCFG and the low level hardware to access comparators */ |
mbed_official | 340:28d1f895c6fe | 246 | __SYSCFG_CLK_ENABLE(); |
mbed_official | 340:28d1f895c6fe | 247 | |
mbed_official | 340:28d1f895c6fe | 248 | HAL_COMP_MspInit(hcomp); |
mbed_official | 340:28d1f895c6fe | 249 | } |
mbed_official | 340:28d1f895c6fe | 250 | |
mbed_official | 340:28d1f895c6fe | 251 | /* Set COMP parameters */ |
mbed_official | 340:28d1f895c6fe | 252 | /* Set COMPxINSEL bits according to hcomp->Init.InvertingInput value */ |
mbed_official | 340:28d1f895c6fe | 253 | /* Set COMPxOUTSEL bits according to hcomp->Init.Output value */ |
mbed_official | 340:28d1f895c6fe | 254 | /* Set COMPxPOL bit according to hcomp->Init.OutputPol value */ |
mbed_official | 340:28d1f895c6fe | 255 | /* Set COMPxHYST bits according to hcomp->Init.Hysteresis value */ |
mbed_official | 340:28d1f895c6fe | 256 | /* Set COMPxMODE bits according to hcomp->Init.Mode value */ |
mbed_official | 340:28d1f895c6fe | 257 | if(hcomp->Instance == COMP2) |
mbed_official | 340:28d1f895c6fe | 258 | { |
mbed_official | 340:28d1f895c6fe | 259 | regshift = COMP_CSR_COMP2_SHIFT; |
mbed_official | 340:28d1f895c6fe | 260 | } |
mbed_official | 340:28d1f895c6fe | 261 | MODIFY_REG(COMP->CSR, |
mbed_official | 340:28d1f895c6fe | 262 | (uint32_t)(COMP_CSR_COMPxINSEL | COMP_CSR_COMPxNONINSEL_MASK | \ |
mbed_official | 340:28d1f895c6fe | 263 | COMP_CSR_COMPxOUTSEL | COMP_CSR_COMPxPOL | \ |
mbed_official | 340:28d1f895c6fe | 264 | COMP_CSR_COMPxHYST | COMP_CSR_COMPxMODE) << regshift, |
mbed_official | 340:28d1f895c6fe | 265 | (hcomp->Init.InvertingInput | \ |
mbed_official | 340:28d1f895c6fe | 266 | hcomp->Init.NonInvertingInput | \ |
mbed_official | 340:28d1f895c6fe | 267 | hcomp->Init.Output | \ |
mbed_official | 340:28d1f895c6fe | 268 | hcomp->Init.OutputPol | \ |
mbed_official | 340:28d1f895c6fe | 269 | hcomp->Init.Hysteresis | \ |
mbed_official | 340:28d1f895c6fe | 270 | hcomp->Init.Mode) << regshift); |
mbed_official | 340:28d1f895c6fe | 271 | |
mbed_official | 340:28d1f895c6fe | 272 | if(hcomp->Init.WindowMode != COMP_WINDOWMODE_DISABLED) |
mbed_official | 340:28d1f895c6fe | 273 | { |
mbed_official | 340:28d1f895c6fe | 274 | COMP->CSR |= COMP_CSR_WNDWEN; |
mbed_official | 340:28d1f895c6fe | 275 | } |
mbed_official | 340:28d1f895c6fe | 276 | |
mbed_official | 340:28d1f895c6fe | 277 | /* Initialize the COMP state*/ |
mbed_official | 340:28d1f895c6fe | 278 | if(hcomp->State == HAL_COMP_STATE_RESET) |
mbed_official | 340:28d1f895c6fe | 279 | { |
mbed_official | 340:28d1f895c6fe | 280 | hcomp->State = HAL_COMP_STATE_READY; |
mbed_official | 340:28d1f895c6fe | 281 | } |
mbed_official | 340:28d1f895c6fe | 282 | } |
mbed_official | 340:28d1f895c6fe | 283 | |
mbed_official | 340:28d1f895c6fe | 284 | return status; |
mbed_official | 340:28d1f895c6fe | 285 | } |
mbed_official | 340:28d1f895c6fe | 286 | |
mbed_official | 340:28d1f895c6fe | 287 | /** |
mbed_official | 340:28d1f895c6fe | 288 | * @brief DeInitializes the COMP peripheral |
mbed_official | 340:28d1f895c6fe | 289 | * @note Deinitialization can't be performed if the COMP configuration is locked. |
mbed_official | 340:28d1f895c6fe | 290 | * To unlock the configuration, perform a system reset. |
mbed_official | 340:28d1f895c6fe | 291 | * @param hcomp: COMP handle |
mbed_official | 340:28d1f895c6fe | 292 | * @retval HAL status |
mbed_official | 340:28d1f895c6fe | 293 | */ |
mbed_official | 340:28d1f895c6fe | 294 | HAL_StatusTypeDef HAL_COMP_DeInit(COMP_HandleTypeDef *hcomp) |
mbed_official | 340:28d1f895c6fe | 295 | { |
mbed_official | 340:28d1f895c6fe | 296 | HAL_StatusTypeDef status = HAL_OK; |
mbed_official | 340:28d1f895c6fe | 297 | uint32_t regshift = COMP_CSR_COMP1_SHIFT; |
mbed_official | 340:28d1f895c6fe | 298 | |
mbed_official | 340:28d1f895c6fe | 299 | /* Check the COMP handle allocation and lock status */ |
mbed_official | 441:d2c15dda23c1 | 300 | if((hcomp == NULL) || ((hcomp->State & COMP_STATE_BIT_LOCK) != RESET)) |
mbed_official | 340:28d1f895c6fe | 301 | { |
mbed_official | 340:28d1f895c6fe | 302 | status = HAL_ERROR; |
mbed_official | 340:28d1f895c6fe | 303 | } |
mbed_official | 340:28d1f895c6fe | 304 | else |
mbed_official | 340:28d1f895c6fe | 305 | { |
mbed_official | 340:28d1f895c6fe | 306 | /* Check the parameter */ |
mbed_official | 340:28d1f895c6fe | 307 | assert_param(IS_COMP_ALL_INSTANCE(hcomp->Instance)); |
mbed_official | 340:28d1f895c6fe | 308 | |
mbed_official | 340:28d1f895c6fe | 309 | /* Set COMP_CSR register to reset value for the corresponding COMP instance */ |
mbed_official | 340:28d1f895c6fe | 310 | if(hcomp->Instance == COMP2) |
mbed_official | 340:28d1f895c6fe | 311 | { |
mbed_official | 340:28d1f895c6fe | 312 | regshift = COMP_CSR_COMP2_SHIFT; |
mbed_official | 340:28d1f895c6fe | 313 | } |
mbed_official | 340:28d1f895c6fe | 314 | MODIFY_REG(COMP->CSR, |
mbed_official | 340:28d1f895c6fe | 315 | COMP_CSR_RESET_PARAMETERS_MASK << regshift, |
mbed_official | 340:28d1f895c6fe | 316 | COMP_CSR_RESET_VALUE << regshift); |
mbed_official | 340:28d1f895c6fe | 317 | |
mbed_official | 340:28d1f895c6fe | 318 | /* DeInit the low level hardware: SYSCFG, GPIO, CLOCK and NVIC */ |
mbed_official | 340:28d1f895c6fe | 319 | HAL_COMP_MspDeInit(hcomp); |
mbed_official | 340:28d1f895c6fe | 320 | |
mbed_official | 340:28d1f895c6fe | 321 | hcomp->State = HAL_COMP_STATE_RESET; |
mbed_official | 340:28d1f895c6fe | 322 | } |
mbed_official | 340:28d1f895c6fe | 323 | |
mbed_official | 340:28d1f895c6fe | 324 | return status; |
mbed_official | 340:28d1f895c6fe | 325 | } |
mbed_official | 340:28d1f895c6fe | 326 | |
mbed_official | 340:28d1f895c6fe | 327 | /** |
mbed_official | 340:28d1f895c6fe | 328 | * @brief Initializes the COMP MSP. |
mbed_official | 340:28d1f895c6fe | 329 | * @param hcomp: COMP handle |
mbed_official | 340:28d1f895c6fe | 330 | * @retval None |
mbed_official | 340:28d1f895c6fe | 331 | */ |
mbed_official | 340:28d1f895c6fe | 332 | __weak void HAL_COMP_MspInit(COMP_HandleTypeDef *hcomp) |
mbed_official | 340:28d1f895c6fe | 333 | { |
mbed_official | 340:28d1f895c6fe | 334 | /* NOTE : This function Should not be modified, when the callback is needed, |
mbed_official | 340:28d1f895c6fe | 335 | the HAL_COMP_MspInit could be implenetd in the user file |
mbed_official | 340:28d1f895c6fe | 336 | */ |
mbed_official | 340:28d1f895c6fe | 337 | } |
mbed_official | 340:28d1f895c6fe | 338 | |
mbed_official | 340:28d1f895c6fe | 339 | /** |
mbed_official | 340:28d1f895c6fe | 340 | * @brief DeInitializes COMP MSP. |
mbed_official | 340:28d1f895c6fe | 341 | * @param hcomp: COMP handle |
mbed_official | 340:28d1f895c6fe | 342 | * @retval None |
mbed_official | 340:28d1f895c6fe | 343 | */ |
mbed_official | 340:28d1f895c6fe | 344 | __weak void HAL_COMP_MspDeInit(COMP_HandleTypeDef *hcomp) |
mbed_official | 340:28d1f895c6fe | 345 | { |
mbed_official | 340:28d1f895c6fe | 346 | /* NOTE : This function Should not be modified, when the callback is needed, |
mbed_official | 340:28d1f895c6fe | 347 | the HAL_COMP_MspDeInit could be implenetd in the user file |
mbed_official | 340:28d1f895c6fe | 348 | */ |
mbed_official | 340:28d1f895c6fe | 349 | } |
mbed_official | 340:28d1f895c6fe | 350 | |
mbed_official | 340:28d1f895c6fe | 351 | /** |
mbed_official | 340:28d1f895c6fe | 352 | * @} |
mbed_official | 340:28d1f895c6fe | 353 | */ |
mbed_official | 340:28d1f895c6fe | 354 | |
mbed_official | 340:28d1f895c6fe | 355 | /** @defgroup COMP_Exported_Functions_Group2 I/O operation functions |
mbed_official | 340:28d1f895c6fe | 356 | * @brief Data transfers functions |
mbed_official | 340:28d1f895c6fe | 357 | * |
mbed_official | 340:28d1f895c6fe | 358 | @verbatim |
mbed_official | 340:28d1f895c6fe | 359 | =============================================================================== |
mbed_official | 340:28d1f895c6fe | 360 | ##### IO operation functions ##### |
mbed_official | 340:28d1f895c6fe | 361 | =============================================================================== |
mbed_official | 340:28d1f895c6fe | 362 | [..] |
mbed_official | 340:28d1f895c6fe | 363 | This subsection provides a set of functions allowing to manage the COMP data |
mbed_official | 340:28d1f895c6fe | 364 | transfers. |
mbed_official | 340:28d1f895c6fe | 365 | |
mbed_official | 340:28d1f895c6fe | 366 | @endverbatim |
mbed_official | 340:28d1f895c6fe | 367 | * @{ |
mbed_official | 340:28d1f895c6fe | 368 | */ |
mbed_official | 340:28d1f895c6fe | 369 | |
mbed_official | 340:28d1f895c6fe | 370 | /** |
mbed_official | 340:28d1f895c6fe | 371 | * @brief Start the comparator |
mbed_official | 340:28d1f895c6fe | 372 | * @param hcomp: COMP handle |
mbed_official | 340:28d1f895c6fe | 373 | * @retval HAL status |
mbed_official | 340:28d1f895c6fe | 374 | */ |
mbed_official | 340:28d1f895c6fe | 375 | HAL_StatusTypeDef HAL_COMP_Start(COMP_HandleTypeDef *hcomp) |
mbed_official | 340:28d1f895c6fe | 376 | { |
mbed_official | 340:28d1f895c6fe | 377 | HAL_StatusTypeDef status = HAL_OK; |
mbed_official | 340:28d1f895c6fe | 378 | uint32_t regshift = COMP_CSR_COMP1_SHIFT; |
mbed_official | 340:28d1f895c6fe | 379 | |
mbed_official | 340:28d1f895c6fe | 380 | /* Check the COMP handle allocation and lock status */ |
mbed_official | 441:d2c15dda23c1 | 381 | if((hcomp == NULL) || ((hcomp->State & COMP_STATE_BIT_LOCK) != RESET)) |
mbed_official | 340:28d1f895c6fe | 382 | { |
mbed_official | 340:28d1f895c6fe | 383 | status = HAL_ERROR; |
mbed_official | 340:28d1f895c6fe | 384 | } |
mbed_official | 340:28d1f895c6fe | 385 | else |
mbed_official | 340:28d1f895c6fe | 386 | { |
mbed_official | 340:28d1f895c6fe | 387 | /* Check the parameter */ |
mbed_official | 340:28d1f895c6fe | 388 | assert_param(IS_COMP_ALL_INSTANCE(hcomp->Instance)); |
mbed_official | 340:28d1f895c6fe | 389 | |
mbed_official | 340:28d1f895c6fe | 390 | if(hcomp->State == HAL_COMP_STATE_READY) |
mbed_official | 340:28d1f895c6fe | 391 | { |
mbed_official | 340:28d1f895c6fe | 392 | /* Enable the selected comparator */ |
mbed_official | 340:28d1f895c6fe | 393 | if(hcomp->Instance == COMP2) |
mbed_official | 340:28d1f895c6fe | 394 | { |
mbed_official | 340:28d1f895c6fe | 395 | regshift = COMP_CSR_COMP2_SHIFT; |
mbed_official | 340:28d1f895c6fe | 396 | } |
mbed_official | 340:28d1f895c6fe | 397 | SET_BIT(COMP->CSR, (uint32_t)COMP_CSR_COMPxEN << regshift); |
mbed_official | 340:28d1f895c6fe | 398 | |
mbed_official | 340:28d1f895c6fe | 399 | hcomp->State = HAL_COMP_STATE_BUSY; |
mbed_official | 340:28d1f895c6fe | 400 | } |
mbed_official | 340:28d1f895c6fe | 401 | else |
mbed_official | 340:28d1f895c6fe | 402 | { |
mbed_official | 340:28d1f895c6fe | 403 | status = HAL_ERROR; |
mbed_official | 340:28d1f895c6fe | 404 | } |
mbed_official | 340:28d1f895c6fe | 405 | } |
mbed_official | 340:28d1f895c6fe | 406 | |
mbed_official | 340:28d1f895c6fe | 407 | return status; |
mbed_official | 340:28d1f895c6fe | 408 | } |
mbed_official | 340:28d1f895c6fe | 409 | |
mbed_official | 340:28d1f895c6fe | 410 | /** |
mbed_official | 340:28d1f895c6fe | 411 | * @brief Stop the comparator |
mbed_official | 340:28d1f895c6fe | 412 | * @param hcomp: COMP handle |
mbed_official | 340:28d1f895c6fe | 413 | * @retval HAL status |
mbed_official | 340:28d1f895c6fe | 414 | */ |
mbed_official | 340:28d1f895c6fe | 415 | HAL_StatusTypeDef HAL_COMP_Stop(COMP_HandleTypeDef *hcomp) |
mbed_official | 340:28d1f895c6fe | 416 | { |
mbed_official | 340:28d1f895c6fe | 417 | HAL_StatusTypeDef status = HAL_OK; |
mbed_official | 340:28d1f895c6fe | 418 | uint32_t regshift = COMP_CSR_COMP1_SHIFT; |
mbed_official | 340:28d1f895c6fe | 419 | |
mbed_official | 340:28d1f895c6fe | 420 | /* Check the COMP handle allocation and lock status */ |
mbed_official | 441:d2c15dda23c1 | 421 | if((hcomp == NULL) || ((hcomp->State & COMP_STATE_BIT_LOCK) != RESET)) |
mbed_official | 340:28d1f895c6fe | 422 | { |
mbed_official | 340:28d1f895c6fe | 423 | status = HAL_ERROR; |
mbed_official | 340:28d1f895c6fe | 424 | } |
mbed_official | 340:28d1f895c6fe | 425 | else |
mbed_official | 340:28d1f895c6fe | 426 | { |
mbed_official | 340:28d1f895c6fe | 427 | /* Check the parameter */ |
mbed_official | 340:28d1f895c6fe | 428 | assert_param(IS_COMP_ALL_INSTANCE(hcomp->Instance)); |
mbed_official | 340:28d1f895c6fe | 429 | |
mbed_official | 340:28d1f895c6fe | 430 | if(hcomp->State == HAL_COMP_STATE_BUSY) |
mbed_official | 340:28d1f895c6fe | 431 | { |
mbed_official | 340:28d1f895c6fe | 432 | /* Disable the selected comparator */ |
mbed_official | 340:28d1f895c6fe | 433 | if(hcomp->Instance == COMP2) |
mbed_official | 340:28d1f895c6fe | 434 | { |
mbed_official | 340:28d1f895c6fe | 435 | regshift = COMP_CSR_COMP2_SHIFT; |
mbed_official | 340:28d1f895c6fe | 436 | } |
mbed_official | 340:28d1f895c6fe | 437 | CLEAR_BIT(COMP->CSR, (uint32_t)COMP_CSR_COMPxEN << regshift); |
mbed_official | 340:28d1f895c6fe | 438 | |
mbed_official | 340:28d1f895c6fe | 439 | hcomp->State = HAL_COMP_STATE_READY; |
mbed_official | 340:28d1f895c6fe | 440 | } |
mbed_official | 340:28d1f895c6fe | 441 | else |
mbed_official | 340:28d1f895c6fe | 442 | { |
mbed_official | 340:28d1f895c6fe | 443 | status = HAL_ERROR; |
mbed_official | 340:28d1f895c6fe | 444 | } |
mbed_official | 340:28d1f895c6fe | 445 | } |
mbed_official | 340:28d1f895c6fe | 446 | |
mbed_official | 340:28d1f895c6fe | 447 | return status; |
mbed_official | 340:28d1f895c6fe | 448 | } |
mbed_official | 340:28d1f895c6fe | 449 | |
mbed_official | 340:28d1f895c6fe | 450 | /** |
mbed_official | 340:28d1f895c6fe | 451 | * @brief Enables the interrupt and starts the comparator |
mbed_official | 340:28d1f895c6fe | 452 | * @param hcomp: COMP handle |
mbed_official | 340:28d1f895c6fe | 453 | * @retval HAL status. |
mbed_official | 340:28d1f895c6fe | 454 | */ |
mbed_official | 340:28d1f895c6fe | 455 | HAL_StatusTypeDef HAL_COMP_Start_IT(COMP_HandleTypeDef *hcomp) |
mbed_official | 340:28d1f895c6fe | 456 | { |
mbed_official | 340:28d1f895c6fe | 457 | HAL_StatusTypeDef status = HAL_OK; |
mbed_official | 340:28d1f895c6fe | 458 | uint32_t extiline = 0; |
mbed_official | 340:28d1f895c6fe | 459 | |
mbed_official | 340:28d1f895c6fe | 460 | /* Check the parameter */ |
mbed_official | 340:28d1f895c6fe | 461 | assert_param(IS_COMP_TRIGGERMODE(hcomp->Init.TriggerMode)); |
mbed_official | 340:28d1f895c6fe | 462 | |
mbed_official | 340:28d1f895c6fe | 463 | status = HAL_COMP_Start(hcomp); |
mbed_official | 340:28d1f895c6fe | 464 | if(status == HAL_OK) |
mbed_official | 340:28d1f895c6fe | 465 | { |
mbed_official | 340:28d1f895c6fe | 466 | /* Check the Exti Line output configuration */ |
mbed_official | 340:28d1f895c6fe | 467 | extiline = __HAL_COMP_GET_EXTI_LINE(hcomp->Instance); |
mbed_official | 340:28d1f895c6fe | 468 | /* Configure the rising edge */ |
mbed_official | 340:28d1f895c6fe | 469 | if((hcomp->Init.TriggerMode & COMP_TRIGGERMODE_IT_RISING) != RESET) |
mbed_official | 340:28d1f895c6fe | 470 | { |
mbed_official | 340:28d1f895c6fe | 471 | __HAL_COMP_EXTI_RISING_IT_ENABLE(extiline); |
mbed_official | 340:28d1f895c6fe | 472 | } |
mbed_official | 340:28d1f895c6fe | 473 | else |
mbed_official | 340:28d1f895c6fe | 474 | { |
mbed_official | 340:28d1f895c6fe | 475 | __HAL_COMP_EXTI_RISING_IT_DISABLE(extiline); |
mbed_official | 340:28d1f895c6fe | 476 | } |
mbed_official | 340:28d1f895c6fe | 477 | /* Configure the falling edge */ |
mbed_official | 340:28d1f895c6fe | 478 | if((hcomp->Init.TriggerMode & COMP_TRIGGERMODE_IT_FALLING) != RESET) |
mbed_official | 340:28d1f895c6fe | 479 | { |
mbed_official | 340:28d1f895c6fe | 480 | __HAL_COMP_EXTI_FALLING_IT_ENABLE(extiline); |
mbed_official | 340:28d1f895c6fe | 481 | } |
mbed_official | 340:28d1f895c6fe | 482 | else |
mbed_official | 340:28d1f895c6fe | 483 | { |
mbed_official | 340:28d1f895c6fe | 484 | __HAL_COMP_EXTI_FALLING_IT_DISABLE(extiline); |
mbed_official | 340:28d1f895c6fe | 485 | } |
mbed_official | 340:28d1f895c6fe | 486 | /* Enable Exti interrupt mode */ |
mbed_official | 340:28d1f895c6fe | 487 | __HAL_COMP_EXTI_ENABLE_IT(extiline); |
mbed_official | 340:28d1f895c6fe | 488 | /* Clear COMP Exti pending bit */ |
mbed_official | 340:28d1f895c6fe | 489 | __HAL_COMP_EXTI_CLEAR_FLAG(extiline); |
mbed_official | 340:28d1f895c6fe | 490 | } |
mbed_official | 340:28d1f895c6fe | 491 | |
mbed_official | 340:28d1f895c6fe | 492 | return status; |
mbed_official | 340:28d1f895c6fe | 493 | } |
mbed_official | 340:28d1f895c6fe | 494 | |
mbed_official | 340:28d1f895c6fe | 495 | /** |
mbed_official | 340:28d1f895c6fe | 496 | * @brief Disable the interrupt and Stop the comparator |
mbed_official | 340:28d1f895c6fe | 497 | * @param hcomp: COMP handle |
mbed_official | 340:28d1f895c6fe | 498 | * @retval HAL status |
mbed_official | 340:28d1f895c6fe | 499 | */ |
mbed_official | 340:28d1f895c6fe | 500 | HAL_StatusTypeDef HAL_COMP_Stop_IT(COMP_HandleTypeDef *hcomp) |
mbed_official | 340:28d1f895c6fe | 501 | { |
mbed_official | 340:28d1f895c6fe | 502 | HAL_StatusTypeDef status = HAL_OK; |
mbed_official | 340:28d1f895c6fe | 503 | |
mbed_official | 340:28d1f895c6fe | 504 | /* Disable the Exti Line interrupt mode */ |
mbed_official | 340:28d1f895c6fe | 505 | __HAL_COMP_EXTI_DISABLE_IT(__HAL_COMP_GET_EXTI_LINE(hcomp->Instance)); |
mbed_official | 340:28d1f895c6fe | 506 | |
mbed_official | 340:28d1f895c6fe | 507 | status = HAL_COMP_Stop(hcomp); |
mbed_official | 340:28d1f895c6fe | 508 | |
mbed_official | 340:28d1f895c6fe | 509 | return status; |
mbed_official | 340:28d1f895c6fe | 510 | } |
mbed_official | 340:28d1f895c6fe | 511 | |
mbed_official | 340:28d1f895c6fe | 512 | /** |
mbed_official | 340:28d1f895c6fe | 513 | * @brief Comparator IRQ Handler |
mbed_official | 340:28d1f895c6fe | 514 | * @param hcomp: COMP handle |
mbed_official | 340:28d1f895c6fe | 515 | * @retval HAL status |
mbed_official | 340:28d1f895c6fe | 516 | */ |
mbed_official | 340:28d1f895c6fe | 517 | void HAL_COMP_IRQHandler(COMP_HandleTypeDef *hcomp) |
mbed_official | 340:28d1f895c6fe | 518 | { |
mbed_official | 340:28d1f895c6fe | 519 | uint32_t extiline = __HAL_COMP_GET_EXTI_LINE(hcomp->Instance); |
mbed_official | 340:28d1f895c6fe | 520 | |
mbed_official | 340:28d1f895c6fe | 521 | /* Check COMP Exti flag */ |
mbed_official | 340:28d1f895c6fe | 522 | if(__HAL_COMP_EXTI_GET_FLAG(extiline) != RESET) |
mbed_official | 340:28d1f895c6fe | 523 | { |
mbed_official | 340:28d1f895c6fe | 524 | /* Clear COMP Exti pending bit */ |
mbed_official | 340:28d1f895c6fe | 525 | __HAL_COMP_EXTI_CLEAR_FLAG(extiline); |
mbed_official | 340:28d1f895c6fe | 526 | |
mbed_official | 340:28d1f895c6fe | 527 | /* COMP trigger user callback */ |
mbed_official | 340:28d1f895c6fe | 528 | HAL_COMP_TriggerCallback(hcomp); |
mbed_official | 340:28d1f895c6fe | 529 | } |
mbed_official | 340:28d1f895c6fe | 530 | } |
mbed_official | 340:28d1f895c6fe | 531 | |
mbed_official | 340:28d1f895c6fe | 532 | /** |
mbed_official | 340:28d1f895c6fe | 533 | * @} |
mbed_official | 340:28d1f895c6fe | 534 | */ |
mbed_official | 340:28d1f895c6fe | 535 | |
mbed_official | 340:28d1f895c6fe | 536 | /** @defgroup COMP_Exported_Functions_Group3 Peripheral Control functions |
mbed_official | 340:28d1f895c6fe | 537 | * @brief management functions |
mbed_official | 340:28d1f895c6fe | 538 | * |
mbed_official | 340:28d1f895c6fe | 539 | @verbatim |
mbed_official | 340:28d1f895c6fe | 540 | =============================================================================== |
mbed_official | 340:28d1f895c6fe | 541 | ##### Peripheral Control functions ##### |
mbed_official | 340:28d1f895c6fe | 542 | =============================================================================== |
mbed_official | 340:28d1f895c6fe | 543 | [..] |
mbed_official | 340:28d1f895c6fe | 544 | This subsection provides a set of functions allowing to control the COMP data |
mbed_official | 340:28d1f895c6fe | 545 | transfers. |
mbed_official | 340:28d1f895c6fe | 546 | |
mbed_official | 340:28d1f895c6fe | 547 | @endverbatim |
mbed_official | 340:28d1f895c6fe | 548 | * @{ |
mbed_official | 340:28d1f895c6fe | 549 | */ |
mbed_official | 340:28d1f895c6fe | 550 | |
mbed_official | 340:28d1f895c6fe | 551 | /** |
mbed_official | 340:28d1f895c6fe | 552 | * @brief Lock the selected comparator configuration. |
mbed_official | 340:28d1f895c6fe | 553 | * @param hcomp: COMP handle |
mbed_official | 340:28d1f895c6fe | 554 | * @retval HAL status |
mbed_official | 340:28d1f895c6fe | 555 | */ |
mbed_official | 340:28d1f895c6fe | 556 | HAL_StatusTypeDef HAL_COMP_Lock(COMP_HandleTypeDef *hcomp) |
mbed_official | 340:28d1f895c6fe | 557 | { |
mbed_official | 340:28d1f895c6fe | 558 | HAL_StatusTypeDef status = HAL_OK; |
mbed_official | 340:28d1f895c6fe | 559 | uint32_t regshift = COMP_CSR_COMP1_SHIFT; |
mbed_official | 340:28d1f895c6fe | 560 | |
mbed_official | 340:28d1f895c6fe | 561 | /* Check the COMP handle allocation and lock status */ |
mbed_official | 441:d2c15dda23c1 | 562 | if((hcomp == NULL) || ((hcomp->State & COMP_STATE_BIT_LOCK) != RESET)) |
mbed_official | 340:28d1f895c6fe | 563 | { |
mbed_official | 340:28d1f895c6fe | 564 | status = HAL_ERROR; |
mbed_official | 340:28d1f895c6fe | 565 | } |
mbed_official | 340:28d1f895c6fe | 566 | else |
mbed_official | 340:28d1f895c6fe | 567 | { |
mbed_official | 340:28d1f895c6fe | 568 | /* Check the parameter */ |
mbed_official | 340:28d1f895c6fe | 569 | assert_param(IS_COMP_ALL_INSTANCE(hcomp->Instance)); |
mbed_official | 340:28d1f895c6fe | 570 | |
mbed_official | 340:28d1f895c6fe | 571 | /* Set lock flag */ |
mbed_official | 340:28d1f895c6fe | 572 | hcomp->State |= COMP_STATE_BIT_LOCK; |
mbed_official | 340:28d1f895c6fe | 573 | |
mbed_official | 340:28d1f895c6fe | 574 | /* Set the lock bit corresponding to selected comparator */ |
mbed_official | 340:28d1f895c6fe | 575 | if(hcomp->Instance == COMP2) |
mbed_official | 340:28d1f895c6fe | 576 | { |
mbed_official | 340:28d1f895c6fe | 577 | regshift = COMP_CSR_COMP2_SHIFT; |
mbed_official | 340:28d1f895c6fe | 578 | } |
mbed_official | 340:28d1f895c6fe | 579 | SET_BIT(COMP->CSR, (uint32_t)COMP_CSR_COMPxLOCK << regshift); |
mbed_official | 340:28d1f895c6fe | 580 | } |
mbed_official | 340:28d1f895c6fe | 581 | |
mbed_official | 340:28d1f895c6fe | 582 | return status; |
mbed_official | 340:28d1f895c6fe | 583 | } |
mbed_official | 340:28d1f895c6fe | 584 | |
mbed_official | 340:28d1f895c6fe | 585 | /** |
mbed_official | 340:28d1f895c6fe | 586 | * @brief Return the output level (high or low) of the selected comparator. |
mbed_official | 340:28d1f895c6fe | 587 | * The output level depends on the selected polarity. |
mbed_official | 340:28d1f895c6fe | 588 | * If the polarity is not inverted: |
mbed_official | 340:28d1f895c6fe | 589 | * - Comparator output is low when the non-inverting input is at a lower |
mbed_official | 340:28d1f895c6fe | 590 | * voltage than the inverting input |
mbed_official | 340:28d1f895c6fe | 591 | * - Comparator output is high when the non-inverting input is at a higher |
mbed_official | 340:28d1f895c6fe | 592 | * voltage than the inverting input |
mbed_official | 340:28d1f895c6fe | 593 | * If the polarity is inverted: |
mbed_official | 340:28d1f895c6fe | 594 | * - Comparator output is high when the non-inverting input is at a lower |
mbed_official | 340:28d1f895c6fe | 595 | * voltage than the inverting input |
mbed_official | 340:28d1f895c6fe | 596 | * - Comparator output is low when the non-inverting input is at a higher |
mbed_official | 340:28d1f895c6fe | 597 | * voltage than the inverting input |
mbed_official | 340:28d1f895c6fe | 598 | * @param hcomp: COMP handle |
mbed_official | 340:28d1f895c6fe | 599 | * @retval Returns the selected comparator output level: COMP_OUTPUTLEVEL_LOW or COMP_OUTPUTLEVEL_HIGH. |
mbed_official | 340:28d1f895c6fe | 600 | * |
mbed_official | 340:28d1f895c6fe | 601 | */ |
mbed_official | 340:28d1f895c6fe | 602 | uint32_t HAL_COMP_GetOutputLevel(COMP_HandleTypeDef *hcomp) |
mbed_official | 340:28d1f895c6fe | 603 | { |
mbed_official | 340:28d1f895c6fe | 604 | uint32_t level=0; |
mbed_official | 340:28d1f895c6fe | 605 | uint32_t regshift = COMP_CSR_COMP1_SHIFT; |
mbed_official | 340:28d1f895c6fe | 606 | |
mbed_official | 340:28d1f895c6fe | 607 | /* Check the parameter */ |
mbed_official | 340:28d1f895c6fe | 608 | assert_param(IS_COMP_ALL_INSTANCE(hcomp->Instance)); |
mbed_official | 340:28d1f895c6fe | 609 | |
mbed_official | 340:28d1f895c6fe | 610 | if(hcomp->Instance == COMP2) |
mbed_official | 340:28d1f895c6fe | 611 | { |
mbed_official | 340:28d1f895c6fe | 612 | regshift = COMP_CSR_COMP2_SHIFT; |
mbed_official | 340:28d1f895c6fe | 613 | } |
mbed_official | 340:28d1f895c6fe | 614 | level = READ_BIT(COMP->CSR, (uint32_t)COMP_CSR_COMPxOUT << regshift); |
mbed_official | 340:28d1f895c6fe | 615 | |
mbed_official | 340:28d1f895c6fe | 616 | if(level != 0) |
mbed_official | 340:28d1f895c6fe | 617 | { |
mbed_official | 340:28d1f895c6fe | 618 | return(COMP_OUTPUTLEVEL_HIGH); |
mbed_official | 340:28d1f895c6fe | 619 | } |
mbed_official | 340:28d1f895c6fe | 620 | return(COMP_OUTPUTLEVEL_LOW); |
mbed_official | 340:28d1f895c6fe | 621 | } |
mbed_official | 340:28d1f895c6fe | 622 | |
mbed_official | 340:28d1f895c6fe | 623 | /** |
mbed_official | 340:28d1f895c6fe | 624 | * @brief Comparator callback. |
mbed_official | 340:28d1f895c6fe | 625 | * @param hcomp: COMP handle |
mbed_official | 340:28d1f895c6fe | 626 | * @retval None |
mbed_official | 340:28d1f895c6fe | 627 | */ |
mbed_official | 340:28d1f895c6fe | 628 | __weak void HAL_COMP_TriggerCallback(COMP_HandleTypeDef *hcomp) |
mbed_official | 340:28d1f895c6fe | 629 | { |
mbed_official | 340:28d1f895c6fe | 630 | /* NOTE : This function should not be modified, when the callback is needed, |
mbed_official | 340:28d1f895c6fe | 631 | the HAL_COMP_TriggerCallback should be implemented in the user file |
mbed_official | 340:28d1f895c6fe | 632 | */ |
mbed_official | 340:28d1f895c6fe | 633 | } |
mbed_official | 340:28d1f895c6fe | 634 | |
mbed_official | 340:28d1f895c6fe | 635 | |
mbed_official | 340:28d1f895c6fe | 636 | /** |
mbed_official | 340:28d1f895c6fe | 637 | * @} |
mbed_official | 340:28d1f895c6fe | 638 | */ |
mbed_official | 340:28d1f895c6fe | 639 | |
mbed_official | 340:28d1f895c6fe | 640 | /** @defgroup COMP_Exported_Functions_Group4 Peripheral State functions |
mbed_official | 340:28d1f895c6fe | 641 | * @brief Peripheral State functions |
mbed_official | 340:28d1f895c6fe | 642 | * |
mbed_official | 340:28d1f895c6fe | 643 | @verbatim |
mbed_official | 340:28d1f895c6fe | 644 | =============================================================================== |
mbed_official | 340:28d1f895c6fe | 645 | ##### Peripheral State functions ##### |
mbed_official | 340:28d1f895c6fe | 646 | =============================================================================== |
mbed_official | 340:28d1f895c6fe | 647 | [..] |
mbed_official | 340:28d1f895c6fe | 648 | This subsection permit to get in run-time the status of the peripheral |
mbed_official | 340:28d1f895c6fe | 649 | and the data flow. |
mbed_official | 340:28d1f895c6fe | 650 | |
mbed_official | 340:28d1f895c6fe | 651 | @endverbatim |
mbed_official | 340:28d1f895c6fe | 652 | * @{ |
mbed_official | 340:28d1f895c6fe | 653 | */ |
mbed_official | 340:28d1f895c6fe | 654 | |
mbed_official | 340:28d1f895c6fe | 655 | /** |
mbed_official | 340:28d1f895c6fe | 656 | * @brief Return the COMP state |
mbed_official | 340:28d1f895c6fe | 657 | * @param hcomp : COMP handle |
mbed_official | 340:28d1f895c6fe | 658 | * @retval HAL state |
mbed_official | 340:28d1f895c6fe | 659 | */ |
mbed_official | 441:d2c15dda23c1 | 660 | uint32_t HAL_COMP_GetState(COMP_HandleTypeDef *hcomp) |
mbed_official | 340:28d1f895c6fe | 661 | { |
mbed_official | 340:28d1f895c6fe | 662 | /* Check the COMP handle allocation */ |
mbed_official | 441:d2c15dda23c1 | 663 | if(hcomp == NULL) |
mbed_official | 340:28d1f895c6fe | 664 | { |
mbed_official | 340:28d1f895c6fe | 665 | return HAL_COMP_STATE_RESET; |
mbed_official | 340:28d1f895c6fe | 666 | } |
mbed_official | 340:28d1f895c6fe | 667 | |
mbed_official | 340:28d1f895c6fe | 668 | /* Check the parameter */ |
mbed_official | 340:28d1f895c6fe | 669 | assert_param(IS_COMP_ALL_INSTANCE(hcomp->Instance)); |
mbed_official | 340:28d1f895c6fe | 670 | |
mbed_official | 340:28d1f895c6fe | 671 | return hcomp->State; |
mbed_official | 340:28d1f895c6fe | 672 | } |
mbed_official | 340:28d1f895c6fe | 673 | /** |
mbed_official | 340:28d1f895c6fe | 674 | * @} |
mbed_official | 340:28d1f895c6fe | 675 | */ |
mbed_official | 340:28d1f895c6fe | 676 | |
mbed_official | 340:28d1f895c6fe | 677 | /** |
mbed_official | 340:28d1f895c6fe | 678 | * @} |
mbed_official | 340:28d1f895c6fe | 679 | */ |
mbed_official | 340:28d1f895c6fe | 680 | |
mbed_official | 340:28d1f895c6fe | 681 | /** |
mbed_official | 340:28d1f895c6fe | 682 | * @} |
mbed_official | 340:28d1f895c6fe | 683 | */ |
mbed_official | 340:28d1f895c6fe | 684 | |
mbed_official | 340:28d1f895c6fe | 685 | /** |
mbed_official | 340:28d1f895c6fe | 686 | * @} |
mbed_official | 340:28d1f895c6fe | 687 | */ |
mbed_official | 340:28d1f895c6fe | 688 | |
mbed_official | 340:28d1f895c6fe | 689 | #endif /* STM32F051x8 || STM32F058xx || */ |
mbed_official | 340:28d1f895c6fe | 690 | /* STM32F071xB || STM32F072xB || STM32F078xx || */ |
mbed_official | 340:28d1f895c6fe | 691 | /* STM32F091xC || defined (STM32F098xx) */ |
mbed_official | 340:28d1f895c6fe | 692 | |
mbed_official | 441:d2c15dda23c1 | 693 | #endif /* HAL_COMP_MODULE_ENABLED */ |
mbed_official | 441:d2c15dda23c1 | 694 | |
mbed_official | 340:28d1f895c6fe | 695 | /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |