Diff: targets/cmsis/TARGET_STM/TARGET_NUCLEO_F334R8/stm32f3xx_hal_pwr_ex.h

Revision:

237:f3da66175598

Child:

375:3d36234a1087

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F334R8/stm32f3xx_hal_pwr_ex.h	Tue Jun 24 14:45:08 2014 +0100
@@ -0,0 +1,240 @@
+/**
+  ******************************************************************************
+  * @file    stm32f3xx_hal_pwr_ex.h
+  * @author  MCD Application Team
+  * @version V1.0.1
+  * @date    18-June-2014
+  * @brief   Header file of PWR HAL Extension module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_PWR_EX_H
+#define __STM32F3xx_HAL_PWR_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup PWREx
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+#if defined(STM32F301x8) ||                         \
+    defined(STM32F302x8) || defined(STM32F302xC) || \
+    defined(STM32F303x8) || defined(STM32F303xC) || defined(STM32F373xC) || \
+    defined(STM32F334x8)
+/**
+  * @brief  PWR PVD configuration structure definition
+  */
+typedef struct
+{
+  uint32_t PVDLevel;   /*!< PVDLevel: Specifies the PVD detection level
+                            This parameter can be a value of @ref PWREx_PVD_detection_level */
+
+  uint32_t Mode;       /*!< Mode: Specifies the operating mode for the selected pins.
+                            This parameter can be a value of @ref PWREx_PVD_Mode */
+}PWR_PVDTypeDef;
+#endif /* STM32F301x8 || STM32F302x8 || STM32F302xC || */
+       /* STM32F303x8 || STM32F303xC */
+       /* STM32F373xC || STM32F334x8 */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup PWREx_Exported_Constants
+  * @{
+  */
+
+#if defined(STM32F301x8) ||                         \
+    defined(STM32F302x8) || defined(STM32F302xC) || \
+    defined(STM32F303x8) || defined(STM32F303xC) || defined(STM32F373xC) || \
+    defined(STM32F334x8)
+/** @defgroup PWREx_PVD_detection_level
+  * @{
+  */
+#define PWR_PVDLEVEL_0                  PWR_CR_PLS_LEV0
+#define PWR_PVDLEVEL_1                  PWR_CR_PLS_LEV1
+#define PWR_PVDLEVEL_2                  PWR_CR_PLS_LEV2
+#define PWR_PVDLEVEL_3                  PWR_CR_PLS_LEV3
+#define PWR_PVDLEVEL_4                  PWR_CR_PLS_LEV4
+#define PWR_PVDLEVEL_5                  PWR_CR_PLS_LEV5
+#define PWR_PVDLEVEL_6                  PWR_CR_PLS_LEV6
+#define PWR_PVDLEVEL_7                  PWR_CR_PLS_LEV7
+#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLEVEL_0) || ((LEVEL) == PWR_PVDLEVEL_1)|| \
+                                 ((LEVEL) == PWR_PVDLEVEL_2) || ((LEVEL) == PWR_PVDLEVEL_3)|| \
+                                 ((LEVEL) == PWR_PVDLEVEL_4) || ((LEVEL) == PWR_PVDLEVEL_5)|| \
+                                 ((LEVEL) == PWR_PVDLEVEL_6) || ((LEVEL) == PWR_PVDLEVEL_7))
+/**
+  * @}
+  */
+
+/** @defgroup PWREx_PVD_Mode
+  * @{
+  */
+#define PWR_MODE_EVT                  ((uint32_t)0x00000000)   /*!< No Interrupt */
+#define PWR_MODE_IT_RISING            ((uint32_t)0x00000001)   /*!< External Interrupt Mode with Rising edge trigger detection */
+#define PWR_MODE_IT_FALLING           ((uint32_t)0x00000002)   /*!< External Interrupt Mode with Falling edge trigger detection */
+#define PWR_MODE_IT_RISING_FALLING    ((uint32_t)0x00000003)   /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
+#define IS_PWR_PVD_MODE(MODE) (((MODE) == PWR_MODE_EVT) || ((MODE) == PWR_MODE_IT_RISING)|| \
+                               ((MODE) == PWR_MODE_IT_FALLING) || ((MODE) == PWR_MODE_IT_RISING_FALLING))
+/**
+  * @}
+  */
+
+#define PWR_EXTI_LINE_PVD  ((uint32_t)0x00010000)  /*!< External interrupt line 16 Connected to the PVD EXTI Line */
+
+#endif /* STM32F301x8 || STM32F302x8 || STM32F302xC || */
+       /* STM32F303x8 || STM32F303xC */
+       /* STM32F373xC || STM32F334x8 */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+/** @defgroup PWREx_SDADC_ANALOGx
+  * @{
+  */
+#define PWR_SDADC_ANALOG1              ((uint32_t)PWR_CR_SDADC1EN)
+#define PWR_SDADC_ANALOG2              ((uint32_t)PWR_CR_SDADC2EN)
+#define PWR_SDADC_ANALOG3              ((uint32_t)PWR_CR_SDADC3EN)
+#define IS_PWR_SDADC_ANALOG(SDADC) (((SDADC) == PWR_SDADC_ANALOG1) || \
+                                    ((SDADC) == PWR_SDADC_ANALOG2) || \
+                                    ((SDADC) == PWR_SDADC_ANALOG3))
+/**
+  * @}
+  */
+#endif /* STM32F373xC || STM32F378xx */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup PWREx_Exported_Macros
+  * @{
+  */
+
+#if defined(STM32F301x8) ||                         \
+    defined(STM32F302x8) || defined(STM32F302xC) || \
+    defined(STM32F303x8) || defined(STM32F303xC) || defined(STM32F373xC) || \
+    defined(STM32F334x8)
+/**
+  * @brief Enable the PVD Exti Line.
+  * @param  __EXTILINE__: specifies the PVD EXTI sources to be enabled.
+  * This parameter can be:
+  *   @arg PWR_EXTI_LINE_PVD
+  * @retval None.
+  */
+#define __HAL_PVD_EXTI_ENABLE_IT(__EXTILINE__)  (EXTI->IMR |= (__EXTILINE__))
+
+/**
+  * @brief Disable the PVD EXTI Line.
+  * @param  __EXTILINE__: specifies the PVD EXTI sources to be disabled.
+  * This parameter can be:
+  *  @arg PWR_EXTI_LINE_PVD
+  * @retval None.
+  */
+#define __HAL_PVD_EXTI_DISABLE_IT(__EXTILINE__)  (EXTI->IMR &= ~(__EXTILINE__))
+
+/**
+  * @brief Generate a Software interrupt on selected EXTI line.
+  * @param  __EXTILINE__: specifies the PVD EXTI sources to be disabled.
+  * This parameter can be:
+  *  @arg PWR_EXTI_LINE_PVD
+  * @retval None
+  */
+#define __HAL_PVD_EXTI_GENERATE_SWIT(__EXTILINE__) (EXTI->SWIER |= (__EXTILINE__))
+
+/**
+  * @brief Check whether the specified PVD EXTI interrupt flag is set or not.
+  * @param  __EXTILINE__: specifies the PVD EXTI sources to be cleared.
+  * This parameter can be:
+  *   @arg PWR_EXTI_LINE_PVD
+  * @retval EXTI PVD Line Status.
+  */
+#define __HAL_PVD_EXTI_GET_FLAG(__EXTILINE__)  (EXTI->PR & (__EXTILINE__))
+
+/**
+  * @brief Clear the PVD EXTI flag.
+  * @param  __EXTILINE__: specifies the PVD EXTI sources to be cleared.
+  * This parameter can be:
+  *   @arg PWR_EXTI_LINE_PVD
+  * @retval None.
+  */
+#define __HAL_PVD_EXTI_CLEAR_FLAG(__EXTILINE__)  (EXTI->PR = (__EXTILINE__))
+#endif /* STM32F301x8 || STM32F302x8 || STM32F302xC || */
+       /* STM32F303x8 || STM32F303xC */
+       /* STM32F373xC || STM32F334x8 */
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Peripheral Control functions ***********************************************/
+#if defined(STM32F301x8) ||                         \
+    defined(STM32F302x8) || defined(STM32F302xC) || \
+    defined(STM32F303x8) || defined(STM32F303xC) || defined(STM32F373xC) || \
+    defined(STM32F334x8)
+void HAL_PWR_PVDConfig(PWR_PVDTypeDef *sConfigPVD);
+void HAL_PWR_EnablePVD(void);
+void HAL_PWR_DisablePVD(void);
+void HAL_PWR_PVD_IRQHandler(void);
+void HAL_PWR_PVDCallback(void);
+#endif /* STM32F301x8 || STM32F302x8 || STM32F302xC || */
+       /* STM32F303x8 || STM32F303xC */
+       /* STM32F373xC || STM32F334x8 */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+void HAL_PWREx_EnableSDADCAnalog(uint32_t Analogx);
+void HAL_PWREx_DisableSDADCAnalog(uint32_t Analogx);
+#endif /* STM32F373xC || STM32F378xx */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_PWR_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/