An I/O controller for virtual pinball machines: accelerometer nudge sensing, analog plunger input, button input encoding, LedWiz compatible output controls, and more.

Dependencies:   mbed FastIO FastPWM USBDevice

Fork of Pinscape_Controller by Mike R

/media/uploads/mjr/pinscape_no_background_small_L7Miwr6.jpg

This is Version 2 of the Pinscape Controller, an I/O controller for virtual pinball machines. (You can find the old version 1 software here.) Pinscape is software for the KL25Z that turns the board into a full-featured I/O controller for virtual pinball, with support for accelerometer-based nudging, a real plunger, button inputs, and feedback device control.

In case you haven't heard of the concept before, a "virtual pinball machine" is basically a video pinball simulator that's built into a real pinball machine body. A TV monitor goes in place of the pinball playfield, and a second TV goes in the backbox to serve as the "backglass" display. A third smaller monitor can serve as the "DMD" (the Dot Matrix Display used for scoring on newer machines), or you can even install a real pinball plasma DMD. A computer is hidden inside the cabinet, running pinball emulation software that displays a life-sized playfield on the main TV. The cabinet has all of the usual buttons, too, so it not only looks like the real thing, but plays like it too. That's a picture of my own machine to the right. On the outside, it's built exactly like a real arcade pinball machine, with the same overall dimensions and all of the standard pinball cabinet hardware.

A few small companies build and sell complete, finished virtual pinball machines, but I think it's more fun as a DIY project. If you have some basic wood-working skills and know your way around PCs, you can build one from scratch. The computer part is just an ordinary Windows PC, and all of the pinball emulation can be built out of free, open-source software. In that spirit, the Pinscape Controller is an open-source software/hardware project that offers a no-compromises, all-in-one control center for all of the unique input/output needs of a virtual pinball cabinet. If you've been thinking about building one of these, but you're not sure how to connect a plunger, flipper buttons, lights, nudge sensor, and whatever else you can think of, this project might be just what you're looking for.

You can find much more information about DIY Pin Cab building in general in the Virtual Cabinet Forum on vpforums.org. Also visit my Pinscape Resources page for more about this project and other virtual pinball projects I'm working on.

Downloads

  • Pinscape Release Builds: This page has download links for all of the Pinscape software. To get started, install and run the Pinscape Config Tool on your Windows computer. It will lead you through the steps for installing the Pinscape firmware on the KL25Z.
  • Config Tool Source Code. The complete C# source code for the config tool. You don't need this to run the tool, but it's available if you want to customize anything or see how it works inside.

Documentation

The new Version 2 Build Guide is now complete! This new version aims to be a complete guide to building a virtual pinball machine, including not only the Pinscape elements but all of the basics, from sourcing parts to building all of the hardware.

You can also refer to the original Hardware Build Guide (PDF), but that's out of date now, since it refers to the old version 1 software, which was rather different (especially when it comes to configuration).

System Requirements

The new config tool requires a fairly up-to-date Microsoft .NET installation. If you use Windows Update to keep your system current, you should be fine. A modern version of Internet Explorer (IE) is required, even if you don't use it as your main browser, because the config tool uses some system components that Microsoft packages into the IE install set. I test with IE11, so that's known to work. IE8 doesn't work. IE9 and 10 are unknown at this point.

The Windows requirements are only for the config tool. The firmware doesn't care about anything on the Windows side, so if you can make do without the config tool, you can use almost any Windows setup.

Main Features

Plunger: The Pinscape Controller started out as a "mechanical plunger" controller: a device for attaching a real pinball plunger to the video game software so that you could launch the ball the natural way. This is still, of course, a central feature of the project. The software supports several types of sensors: a high-resolution optical sensor (which works by essentially taking pictures of the plunger as it moves); a slide potentionmeter (which determines the position via the changing electrical resistance in the pot); a quadrature sensor (which counts bars printed on a special guide rail that it moves along); and an IR distance sensor (which determines the position by sending pulses of light at the plunger and measuring the round-trip travel time). The Build Guide explains how to set up each type of sensor.

Nudging: The KL25Z (the little microcontroller that the software runs on) has a built-in accelerometer. The Pinscape software uses it to sense when you nudge the cabinet, and feeds the acceleration data to the pinball software on the PC. This turns physical nudges into virtual English on the ball. The accelerometer is quite sensitive and accurate, so we can measure the difference between little bumps and hard shoves, and everything in between. The result is natural and immersive.

Buttons: You can wire real pinball buttons to the KL25Z, and the software will translate the buttons into PC input. You have the option to map each button to a keyboard key or joystick button. You can wire up your flipper buttons, Magna Save buttons, Start button, coin slots, operator buttons, and whatever else you need.

Feedback devices: You can also attach "feedback devices" to the KL25Z. Feedback devices are things that create tactile, sound, and lighting effects in sync with the game action. The most popular PC pinball emulators know how to address a wide variety of these devices, and know how to match them to on-screen action in each virtual table. You just need an I/O controller that translates commands from the PC into electrical signals that turn the devices on and off. The Pinscape Controller can do that for you.

Expansion Boards

There are two main ways to run the Pinscape Controller: standalone, or using the "expansion boards".

In the basic standalone setup, you just need the KL25Z, plus whatever buttons, sensors, and feedback devices you want to attach to it. This mode lets you take advantage of everything the software can do, but for some features, you'll have to build some ad hoc external circuitry to interface external devices with the KL25Z. The Build Guide has detailed plans for exactly what you need to build.

The other option is the Pinscape Expansion Boards. The expansion boards are a companion project, which is also totally free and open-source, that provides Printed Circuit Board (PCB) layouts that are designed specifically to work with the Pinscape software. The PCB designs are in the widely used EAGLE format, which many PCB manufacturers can turn directly into physical boards for you. The expansion boards organize all of the external connections more neatly than on the standalone KL25Z, and they add all of the interface circuitry needed for all of the advanced software functions. The big thing they bring to the table is lots of high-power outputs. The boards provide a modular system that lets you add boards to add more outputs. If you opt for the basic core setup, you'll have enough outputs for all of the toys in a really well-equipped cabinet. If your ambitions go beyond merely well-equipped and run to the ridiculously extravagant, just add an extra board or two. The modular design also means that you can add to the system over time.

Expansion Board project page

Update notes

If you have a Pinscape V1 setup already installed, you should be able to switch to the new version pretty seamlessly. There are just a couple of things to be aware of.

First, the "configuration" procedure is completely different in the new version. Way better and way easier, but it's not what you're used to from V1. In V1, you had to edit the project source code and compile your own custom version of the program. No more! With V2, you simply install the standard, pre-compiled .bin file, and select options using the Pinscape Config Tool on Windows.

Second, if you're using the TSL1410R optical sensor for your plunger, there's a chance you'll need to boost your light source's brightness a little bit. The "shutter speed" is faster in this version, which means that it doesn't spend as much time collecting light per frame as before. The software actually does "auto exposure" adaptation on every frame, so the increased shutter speed really shouldn't bother it, but it does require a certain minimum level of contrast, which requires a certain minimal level of lighting. Check the plunger viewer in the setup tool if you have any problems; if the image looks totally dark, try increasing the light level to see if that helps.

New Features

V2 has numerous new features. Here are some of the highlights...

Dynamic configuration: as explained above, configuration is now handled through the Config Tool on Windows. It's no longer necessary to edit the source code or compile your own modified binary.

Improved plunger sensing: the software now reads the TSL1410R optical sensor about 15x faster than it did before. This allows reading the sensor at full resolution (400dpi), about 400 times per second. The faster frame rate makes a big difference in how accurately we can read the plunger position during the fast motion of a release, which allows for more precise position sensing and faster response. The differences aren't dramatic, since the sensing was already pretty good even with the slower V1 scan rate, but you might notice a little better precision in tricky skill shots.

Keyboard keys: button inputs can now be mapped to keyboard keys. The joystick button option is still available as well, of course. Keyboard keys have the advantage of being closer to universal for PC pinball software: some pinball software can be set up to take joystick input, but nearly all PC pinball emulators can take keyboard input, and nearly all of them use the same key mappings.

Local shift button: one physical button can be designed as the local shift button. This works like a Shift button on a keyboard, but with cabinet buttons. It allows each physical button on the cabinet to have two PC keys assigned, one normal and one shifted. Hold down the local shift button, then press another key, and the other key's shifted key mapping is sent to the PC. The shift button can have a regular key mapping of its own as well, so it can do double duty. The shift feature lets you access more functions without cluttering your cabinet with extra buttons. It's especially nice for less frequently used functions like adjusting the volume or activating night mode.

Night mode: the output controller has a new "night mode" option, which lets you turn off all of your noisy devices with a single button, switch, or PC command. You can designate individual ports as noisy or not. Night mode only disables the noisemakers, so you still get the benefit of your flashers, button lights, and other quiet devices. This lets you play late into the night without disturbing your housemates or neighbors.

Gamma correction: you can designate individual output ports for gamma correction. This adjusts the intensity level of an output to make it match the way the human eye perceives brightness, so that fades and color mixes look more natural in lighting devices. You can apply this to individual ports, so that it only affects ports that actually have lights of some kind attached.

IR Remote Control: the controller software can transmit and/or receive IR remote control commands if you attach appropriate parts (an IR LED to send, an IR sensor chip to receive). This can be used to turn on your TV(s) when the system powers on, if they don't turn on automatically, and for any other functions you can think of requiring IR send/receive capabilities. You can assign IR commands to cabinet buttons, so that pressing a button on your cabinet sends a remote control command from the attached IR LED, and you can have the controller generate virtual key presses on your PC in response to received IR commands. If you have the IR sensor attached, the system can use it to learn commands from your existing remotes.

Yet more USB fixes: I've been gradually finding and fixing USB bugs in the mbed library for months now. This version has all of the fixes of the last couple of releases, of course, plus some new ones. It also has a new "last resort" feature, since there always seems to be "just one more" USB bug. The last resort is that you can tell the device to automatically reboot itself if it loses the USB connection and can't restore it within a given time limit.

More Downloads

  • Custom VP builds: I created modified versions of Visual Pinball 9.9 and Physmod5 that you might want to use in combination with this controller. The modified versions have special handling for plunger calibration specific to the Pinscape Controller, as well as some enhancements to the nudge physics. If you're not using the plunger, you might still want it for the nudge improvements. The modified version also works with any other input controller, so you can get the enhanced nudging effects even if you're using a different plunger/nudge kit. The big change in the modified versions is a "filter" for accelerometer input that's designed to make the response to cabinet nudges more realistic. It also makes the response more subdued than in the standard VP, so it's not to everyone's taste. The downloads include both the updated executables and the source code changes, in case you want to merge the changes into your own custom version(s).

    Note! These features are now standard in the official VP releases, so you don't need my custom builds if you're using 9.9.1 or later and/or VP 10. I don't think there's any reason to use my versions instead of the latest official ones, and in fact I'd encourage you to use the official releases since they're more up to date, but I'm leaving my builds available just in case. In the official versions, look for the checkbox "Enable Nudge Filter" in the Keys preferences dialog. My custom versions don't include that checkbox; they just enable the filter unconditionally.
  • Output circuit shopping list: This is a saved shopping cart at mouser.com with the parts needed to build one copy of the high-power output circuit for the LedWiz emulator feature, for use with the standalone KL25Z (that is, without the expansion boards). The quantities in the cart are for one output channel, so if you want N outputs, simply multiply the quantities by the N, with one exception: you only need one ULN2803 transistor array chip for each eight output circuits. If you're using the expansion boards, you won't need any of this, since the boards provide their own high-power outputs.
  • Cary Owens' optical sensor housing: A 3D-printable design for a housing/mounting bracket for the optical plunger sensor, designed by Cary Owens. This makes it easy to mount the sensor.
  • Lemming77's potentiometer mounting bracket and shooter rod connecter: Sketchup designs for 3D-printable parts for mounting a slide potentiometer as the plunger sensor. These were designed for a particular slide potentiometer that used to be available from an Aliexpress.com seller but is no longer listed. You can probably use this design as a starting point for other similar devices; just check the dimensions before committing the design to plastic.

Copyright and License

The Pinscape firmware is copyright 2014, 2021 by Michael J Roberts. It's released under an MIT open-source license. See License.

Warning to VirtuaPin Kit Owners

This software isn't designed as a replacement for the VirtuaPin plunger kit's firmware. If you bought the VirtuaPin kit, I recommend that you don't install this software. The VirtuaPin kit uses the same KL25Z microcontroller that Pinscape uses, but the rest of its hardware is different and incompatible. In particular, the Pinscape firmware doesn't include support for the IR proximity sensor used in the VirtuaPin plunger kit, so you won't be able to use your plunger device with the Pinscape firmware. In addition, the VirtuaPin setup uses a different set of GPIO pins for the button inputs from the Pinscape defaults, so if you do install the Pinscape firmware, you'll have to go into the Config Tool and reassign all of the buttons to match the VirtuaPin wiring.

Committer:
mjr
Date:
Thu Apr 13 23:20:28 2017 +0000
Revision:
82:4f6209cb5c33
Child:
86:e30a1f60f783
Plunger refactoring; AEDR-8300 added; TSL1401CL in progress; VL6180X added

Who changed what in which revision?

UserRevisionLine numberNew contents of line
mjr 82:4f6209cb5c33 1 // Plunger sensor type for distance sensors.
mjr 82:4f6209cb5c33 2 //
mjr 82:4f6209cb5c33 3 // This type of sensor measures the distance to a target by sending
mjr 82:4f6209cb5c33 4 // optical or sound signals and watching for the reflection. There are
mjr 82:4f6209cb5c33 5 // many types of these sensors, including sensors that measure the
mjr 82:4f6209cb5c33 6 // intensity of reflected sound or light signals, sensors that measure
mjr 82:4f6209cb5c33 7 // the round-trip time of "pings", and sensors that measure optical
mjr 82:4f6209cb5c33 8 // parallax.
mjr 82:4f6209cb5c33 9 //
mjr 82:4f6209cb5c33 10 // The basic installation for this type of sensor involves placing the
mjr 82:4f6209cb5c33 11 // sensor itself in a fixed location at one end of the plunger, pointing
mjr 82:4f6209cb5c33 12 // down the length of the plunger, and placing a reflective target at
mjr 82:4f6209cb5c33 13 // the end of the plunger. The target can simply be an ordinary plunger
mjr 82:4f6209cb5c33 14 // tip, if the sensor is at the far end of the plunger facing forward
mjr 82:4f6209cb5c33 15 // (facing the front of the cabinet). Alternatively, the target can
mjr 82:4f6209cb5c33 16 // be a disk or similar object attached to the end of the plunger, and
mjr 82:4f6209cb5c33 17 // the sensor can be placed at the front of the machine facing the target.
mjr 82:4f6209cb5c33 18 // In either case, the sensor measures the distance to the target at any
mjr 82:4f6209cb5c33 19 // given time, and we interpret that into the plunger position.
mjr 82:4f6209cb5c33 20 //
mjr 82:4f6209cb5c33 21 // Here are the specific sensor types we currently support:
mjr 82:4f6209cb5c33 22 //
mjr 82:4f6209cb5c33 23 // VL6180X: This is an optical (IR) "time of flight" sensor that measures
mjr 82:4f6209cb5c33 24 // the distance to the target by sending optical pings and timing the
mjr 82:4f6209cb5c33 25 // return signal, converting the result to distance via the known speed
mjr 82:4f6209cb5c33 26 // of light. This sensor has nominal 1mm precision, although its true
mjr 82:4f6209cb5c33 27 // precision in testing is closer to 5mm. Sample times are around 16ms.
mjr 82:4f6209cb5c33 28 // This makes the sensor acceptable but not great by Pinscape standards;
mjr 82:4f6209cb5c33 29 // we generally consider 2.5ms read times and .25mm precision to be the
mjr 82:4f6209cb5c33 30 // minimum standards. However, this sensor is very inexpensive and easier
mjr 82:4f6209cb5c33 31 // to set up than most of the better options, so it might be attractive to
mjr 82:4f6209cb5c33 32 // some cab builders despite the quality tradeoffs.
mjr 82:4f6209cb5c33 33
mjr 82:4f6209cb5c33 34 #ifndef _DISTANCESENSOR_H_
mjr 82:4f6209cb5c33 35 #define _DISTANCESENSOR_H_
mjr 82:4f6209cb5c33 36
mjr 82:4f6209cb5c33 37 #include "plunger.h"
mjr 82:4f6209cb5c33 38 #include "VL6180X.h"
mjr 82:4f6209cb5c33 39
mjr 82:4f6209cb5c33 40 // Base class for distance sensors
mjr 82:4f6209cb5c33 41 class PlungerSensorDistance: public PlungerSensor
mjr 82:4f6209cb5c33 42 {
mjr 82:4f6209cb5c33 43 public:
mjr 82:4f6209cb5c33 44 PlungerSensorDistance()
mjr 82:4f6209cb5c33 45 {
mjr 82:4f6209cb5c33 46 // start the sample timer
mjr 82:4f6209cb5c33 47 t.start();
mjr 82:4f6209cb5c33 48 }
mjr 82:4f6209cb5c33 49
mjr 82:4f6209cb5c33 50 // get the average scan time
mjr 82:4f6209cb5c33 51 virtual uint32_t getAvgScanTime() { return uint32_t(totalTime / nRuns); }
mjr 82:4f6209cb5c33 52
mjr 82:4f6209cb5c33 53 protected:
mjr 82:4f6209cb5c33 54 // collect scan time statistics
mjr 82:4f6209cb5c33 55 void collectScanTimeStats(uint32_t dt)
mjr 82:4f6209cb5c33 56 {
mjr 82:4f6209cb5c33 57 totalTime += dt;
mjr 82:4f6209cb5c33 58 nRuns += 1;
mjr 82:4f6209cb5c33 59 }
mjr 82:4f6209cb5c33 60
mjr 82:4f6209cb5c33 61 // sample timer
mjr 82:4f6209cb5c33 62 Timer t;
mjr 82:4f6209cb5c33 63
mjr 82:4f6209cb5c33 64 // scan time statistics
mjr 82:4f6209cb5c33 65 uint32_t tStart; // time (on this->t) of start of current scan
mjr 82:4f6209cb5c33 66 uint64_t totalTime; // total time consumed by all reads so far
mjr 82:4f6209cb5c33 67 uint32_t nRuns; // number of runs so far
mjr 82:4f6209cb5c33 68 };
mjr 82:4f6209cb5c33 69
mjr 82:4f6209cb5c33 70 // PlungerSensor interface implementation for VL6180X sensors.
mjr 82:4f6209cb5c33 71 class PlungerSensorVL6180X: public PlungerSensorDistance
mjr 82:4f6209cb5c33 72 {
mjr 82:4f6209cb5c33 73 public:
mjr 82:4f6209cb5c33 74 PlungerSensorVL6180X(PinName sda, PinName scl, PinName gpio0)
mjr 82:4f6209cb5c33 75 : sensor(sda, scl, I2C_ADDRESS, gpio0)
mjr 82:4f6209cb5c33 76 {
mjr 82:4f6209cb5c33 77 }
mjr 82:4f6209cb5c33 78
mjr 82:4f6209cb5c33 79 static const int I2C_ADDRESS = 0x28;
mjr 82:4f6209cb5c33 80
mjr 82:4f6209cb5c33 81 virtual void init()
mjr 82:4f6209cb5c33 82 {
mjr 82:4f6209cb5c33 83 // reboot and initialize the sensor
mjr 82:4f6209cb5c33 84 sensor.init();
mjr 82:4f6209cb5c33 85
mjr 82:4f6209cb5c33 86 // set the default configuration
mjr 82:4f6209cb5c33 87 sensor.setDefaults();
mjr 82:4f6209cb5c33 88
mjr 82:4f6209cb5c33 89 // start the first reading
mjr 82:4f6209cb5c33 90 tStart = t.read_us();
mjr 82:4f6209cb5c33 91 sensor.startRangeReading();
mjr 82:4f6209cb5c33 92 }
mjr 82:4f6209cb5c33 93
mjr 82:4f6209cb5c33 94 virtual bool ready()
mjr 82:4f6209cb5c33 95 {
mjr 82:4f6209cb5c33 96 return sensor.rangeReady();
mjr 82:4f6209cb5c33 97 }
mjr 82:4f6209cb5c33 98
mjr 82:4f6209cb5c33 99 virtual bool read(PlungerReading &r)
mjr 82:4f6209cb5c33 100 {
mjr 82:4f6209cb5c33 101 // get the range reading
mjr 82:4f6209cb5c33 102 uint8_t d;
mjr 82:4f6209cb5c33 103 int err = sensor.getRange(d, 25000);
mjr 82:4f6209cb5c33 104
mjr 82:4f6209cb5c33 105 // start a new reading
mjr 82:4f6209cb5c33 106 sensor.startRangeReading();
mjr 82:4f6209cb5c33 107 tStart = t.read_us();
mjr 82:4f6209cb5c33 108
mjr 82:4f6209cb5c33 109 // use the current timestamp
mjr 82:4f6209cb5c33 110 r.t = t.read_us();
mjr 82:4f6209cb5c33 111
mjr 82:4f6209cb5c33 112 // Normalize the reading to the 0..65536 scale. We assume
mjr 82:4f6209cb5c33 113 // that the sensor is mounted at the front of the cabinet
mjr 82:4f6209cb5c33 114 // facing towards the back, so the plunger moves towards
mjr 82:4f6209cb5c33 115 // the sensor as its retracted. The maximum distance that
mjr 82:4f6209cb5c33 116 // a standard plunger e-ring can get from the front wall of
mjr 82:4f6209cb5c33 117 // the cabinet is about 5" or 127mm, so we'll use 127mm as
mjr 82:4f6209cb5c33 118 // our normalized zero point (the maximum forward position).
mjr 82:4f6209cb5c33 119 // We'll assume that the sensor is set up so that the target
mjr 82:4f6209cb5c33 120 // at the e-ring gets no closer than 1cm = 10mm, so this is
mjr 82:4f6209cb5c33 121 // our maximum retracted position, or 65535 on the normalized
mjr 82:4f6209cb5c33 122 // scale. So our scale maps from 10mm..127mm to 65535..0.
mjr 82:4f6209cb5c33 123 if (d > 127)
mjr 82:4f6209cb5c33 124 d = 127;
mjr 82:4f6209cb5c33 125 else if (d < 10)
mjr 82:4f6209cb5c33 126 d = 10;
mjr 82:4f6209cb5c33 127 r.pos = (117 - (d - 10)) * (65535/117);
mjr 82:4f6209cb5c33 128
mjr 82:4f6209cb5c33 129 // collect scan time statistics
mjr 82:4f6209cb5c33 130 if (err == 0)
mjr 82:4f6209cb5c33 131 collectScanTimeStats(uint32_t(r.t - tStart));
mjr 82:4f6209cb5c33 132
mjr 82:4f6209cb5c33 133 // return the status ('err' is zero on success)
mjr 82:4f6209cb5c33 134 return err == 0;
mjr 82:4f6209cb5c33 135 }
mjr 82:4f6209cb5c33 136
mjr 82:4f6209cb5c33 137 protected:
mjr 82:4f6209cb5c33 138 // underlying sensor interface
mjr 82:4f6209cb5c33 139 VL6180X sensor;
mjr 82:4f6209cb5c33 140 };
mjr 82:4f6209cb5c33 141
mjr 82:4f6209cb5c33 142
mjr 82:4f6209cb5c33 143 #endif