Fork of mbed-src file paths change. LPC1114FN28 use only.

Fork of mbed-src by mbed official

Information

この情報は2013/10/28時点での解決方法です。
現在はmbed-src、標準ライブラリで問題なくコンパイルが可能です。

・使う物
LPC1114FN28
mbed SDK

LPC1114FN28でmbed-SDKのLibraryを使うとCompile出来ない。(2013/10/28) /media/uploads/minicube/mbed_lpc1114_sdk.png

パスが通ってないだけのようなのでファイルを以下に移動する。

mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\
mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\

にあるファイルをすべて

mbed-src\targets\cmsis\TARGET_NXP\

へ移動

mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\にある

TOOLCHAIN_ARM_MICRO

をフォルダごと

mbed-src\targets\cmsis\TARGET_NXP\

へ移動

mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\
mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\

にあるファイルをすべて

mbed-src\targets\hal\TARGET_NXP\

へ移動

移動後は以下のような構成になると思います。
※不要なファイルは削除してあります。

/media/uploads/minicube/mbed_lpc1114_sdk_tree.png


ファイルの移動が面倒なので以下に本家からフォークしたライブラリを置いておきます。

Import librarymbed-src-LPC1114FN28

Fork of mbed-src file paths change. LPC1114FN28 use only.


エラーが出力される場合

"TOOLCHAIN_ARM_MICRO"が無いとエラーになる。

Error: Undefined symbol _initial_sp (referred from entry2.o).
Error: Undefined symbol _heap_base (referred from malloc.o).
Error: Undefined symbol _heap_limit (referred from malloc.o).

LPC1114FN28はMicrolibを使ってCompileされるため上記のエラーになるようです。

targets/hal/TARGET_NXP/us_ticker.c

Committer:
minicube
Date:
2013-10-27
Revision:
43:b3acfef78949
Parent:
targets/hal/TARGET_NXP/TARGET_LPC11XX_11CXX/us_ticker.c@ 30:91c1d09ada54

File content as of revision 43:b3acfef78949:

/* mbed Microcontroller Library
 * Copyright (c) 2006-2013 ARM Limited
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
#include <stddef.h>
#include "us_ticker_api.h"
#include "PeripheralNames.h"

#define US_TICKER_TIMER          ((LPC_TMR_TypeDef *)LPC_CT32B1_BASE)
#define US_TICKER_TIMER_IRQn     TIMER_32_1_IRQn

int us_ticker_inited = 0;

void us_ticker_init(void) {
    if (us_ticker_inited) return;
    us_ticker_inited = 1;
    
    LPC_SYSCON->SYSAHBCLKCTRL |= (1<<10); // Clock TIMER_1
    uint32_t PCLK = SystemCoreClock;

    US_TICKER_TIMER->TCR = 0x2;  // reset

    uint32_t prescale = PCLK / 1000000; // default to 1MHz (1 us ticks)
    US_TICKER_TIMER->PR = prescale - 1;
    US_TICKER_TIMER->TCR = 1; // enable = 1, reset = 0

    NVIC_SetVector(US_TICKER_TIMER_IRQn, (uint32_t)us_ticker_irq_handler);
    NVIC_EnableIRQ(US_TICKER_TIMER_IRQn);
}

uint32_t us_ticker_read() {
    if (!us_ticker_inited)
        us_ticker_init();
    
    return US_TICKER_TIMER->TC;
}

void us_ticker_set_interrupt(unsigned int timestamp) {
    // set match value
    US_TICKER_TIMER->MR0 = timestamp;
    // enable match interrupt
    US_TICKER_TIMER->MCR |= 1;
}

void us_ticker_disable_interrupt(void) {
    US_TICKER_TIMER->MCR &= ~1;
}

void us_ticker_clear_interrupt(void) {
    US_TICKER_TIMER->IR = 1;
}