Fork of mbed-src file paths change. LPC1114FN28 use only.
Fork of mbed-src by
Information
この情報は2013/10/28時点での解決方法です。
現在はmbed-src、標準ライブラリで問題なくコンパイルが可能です。
・使う物
LPC1114FN28
mbed SDK
LPC1114FN28でmbed-SDKのLibraryを使うとCompile出来ない。(2013/10/28)
パスが通ってないだけのようなのでファイルを以下に移動する。
mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\ mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\ |
にあるファイルをすべて
mbed-src\targets\cmsis\TARGET_NXP\ |
へ移動
mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\にある
TOOLCHAIN_ARM_MICRO |
をフォルダごと
mbed-src\targets\cmsis\TARGET_NXP\ |
へ移動
mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\ mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\ |
にあるファイルをすべて
mbed-src\targets\hal\TARGET_NXP\ |
へ移動
移動後は以下のような構成になると思います。
※不要なファイルは削除してあります。
![]() |
ファイルの移動が面倒なので以下に本家からフォークしたライブラリを置いておきます。
Import librarymbed-src-LPC1114FN28
Fork of mbed-src file paths change. LPC1114FN28 use only.
エラーが出力される場合
"TOOLCHAIN_ARM_MICRO"が無いとエラーになる。
Error: Undefined symbol _initial_sp (referred from entry2.o). Error: Undefined symbol _heap_base (referred from malloc.o). Error: Undefined symbol _heap_limit (referred from malloc.o). |
LPC1114FN28はMicrolibを使ってCompileされるため上記のエラーになるようです。
targets/cmsis/TARGET_NXP/TARGET_LPC43XX/system_LPC43xx.h
- Committer:
- bogdanm
- Date:
- 2013-09-10
- Revision:
- 20:4263a77256ae
File content as of revision 20:4263a77256ae:
/* * @brief LPC43xx/LPC18xx mcu header * * Copyright(C) NXP Semiconductors, 2012 * All rights reserved. * * Software that is described herein is for illustrative purposes only * which provides customers with programming information regarding the * LPC products. This software is supplied "AS IS" without any warranties of * any kind, and NXP Semiconductors and its licensor disclaim any and * all warranties, express or implied, including all implied warranties of * merchantability, fitness for a particular purpose and non-infringement of * intellectual property rights. NXP Semiconductors assumes no responsibility * or liability for the use of the software, conveys no license or rights under any * patent, copyright, mask work right, or any other intellectual property rights in * or to any products. NXP Semiconductors reserves the right to make changes * in the software without notification. NXP Semiconductors also makes no * representation or warranty that such application will be suitable for the * specified use without further testing or modification. * * Permission to use, copy, modify, and distribute this software and its * documentation is hereby granted, under NXP Semiconductors' and its * licensor's relevant copyrights in the software, without fee, provided that it * is used in conjunction with NXP Semiconductors microcontrollers. This * copyright, permission, and disclaimer notice must appear in all copies of * this code. */ #ifndef __SYSTEM_LPC43XX_H #define __SYSTEM_LPC43XX_H #ifdef __cplusplus extern "C" { #endif /* System initialization options */ #define PIN_SETUP 1 /* Configure pins during initialization */ #define CLOCK_SETUP 1 /* Configure clocks during initialization */ #define MEMORY_SETUP 0 /* Configure external memory during init */ #define SPIFI_INIT 1 /* Initialize SPIFI */ /* Crystal frequency into device */ #define CRYSTAL_MAIN_FREQ_IN 12000000 /* Crystal frequency into device for RTC/32K input */ #define CRYSTAL_32K_FREQ_IN 32768 /* Default CPU clock frequency */ #if defined(CHIP_LPC43XX) #define MAX_CLOCK_FREQ (204000000) #else #define MAX_CLOCK_FREQ (180000000) #endif #if defined(__FPU_PRESENT) && __FPU_PRESENT == 1 /* FPU declarations */ #define LPC_CPACR 0xE000ED88 #define SCB_MVFR0 0xE000EF40 #define SCB_MVFR0_RESET 0x10110021 #define SCB_MVFR1 0xE000EF44 #define SCB_MVFR1_RESET 0x11000011 #if defined(__ARMCC_VERSION) void fpuInit(void) __attribute__ ((section("BOOTSTRAP_CODE"))); #else extern void fpuInit(void); #endif #endif extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */ /** * Initialize the system * * @param none * @return none * * @brief Setup the microcontroller system. * Initialize the System and update the SystemCoreClock variable. */ extern void SystemInit (void); #ifdef __cplusplus } #endif #endif /* __SYSTEM_LPC43XX_H */