Fork of mbed-src file paths change. LPC1114FN28 use only.
Fork of mbed-src by
Information
この情報は2013/10/28時点での解決方法です。
現在はmbed-src、標準ライブラリで問題なくコンパイルが可能です。
・使う物
LPC1114FN28
mbed SDK
LPC1114FN28でmbed-SDKのLibraryを使うとCompile出来ない。(2013/10/28)
パスが通ってないだけのようなのでファイルを以下に移動する。
mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\ mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\ |
にあるファイルをすべて
mbed-src\targets\cmsis\TARGET_NXP\ |
へ移動
mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\にある
TOOLCHAIN_ARM_MICRO |
をフォルダごと
mbed-src\targets\cmsis\TARGET_NXP\ |
へ移動
mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\ mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\ |
にあるファイルをすべて
mbed-src\targets\hal\TARGET_NXP\ |
へ移動
移動後は以下のような構成になると思います。
※不要なファイルは削除してあります。
![]() |
ファイルの移動が面倒なので以下に本家からフォークしたライブラリを置いておきます。
Import librarymbed-src-LPC1114FN28
Fork of mbed-src file paths change. LPC1114FN28 use only.
エラーが出力される場合
"TOOLCHAIN_ARM_MICRO"が無いとエラーになる。
Error: Undefined symbol _initial_sp (referred from entry2.o). Error: Undefined symbol _heap_base (referred from malloc.o). Error: Undefined symbol _heap_limit (referred from malloc.o). |
LPC1114FN28はMicrolibを使ってCompileされるため上記のエラーになるようです。
targets/cmsis/TARGET_Freescale/TARGET_KL46Z/system_MKL46Z4.h
- Committer:
- mbed_official
- Date:
- 2013-09-25
- Revision:
- 31:42176bc3c368
File content as of revision 31:42176bc3c368:
/* ** ################################################################### ** Processor: MKL46Z128VLK4 ** Compilers: ARM Compiler ** Freescale C/C++ for Embedded ARM ** GNU C Compiler ** IAR ANSI C/C++ Compiler for ARM ** ** Reference manual: KL25RM, Rev.1, Jun 2012 ** Version: rev. 1.1, 2012-06-21 ** ** Abstract: ** Provides a system configuration function and a global variable that ** contains the system frequency. It configures the device and initializes ** the oscillator (PLL) that is part of the microcontroller device. ** ** Copyright: 2012 Freescale Semiconductor, Inc. All Rights Reserved. ** ** http: www.freescale.com ** mail: support@freescale.com ** ** Revisions: ** - rev. 1.0 (2012-06-13) ** Initial version. ** - rev. 1.1 (2012-06-21) ** Update according to reference manual rev. 1. ** ** ################################################################### */ /** * @file MKL46Z4 * @version 1.1 * @date 2012-06-21 * @brief Device specific configuration file for MKL46Z4 (header file) * * Provides a system configuration function and a global variable that contains * the system frequency. It configures the device and initializes the oscillator * (PLL) that is part of the microcontroller device. */ #ifndef SYSTEM_MKL46Z4_H_ #define SYSTEM_MKL46Z4_H_ /**< Symbol preventing repeated inclusion */ #ifdef __cplusplus extern "C" { #endif #include <stdint.h> /** * @brief System clock frequency (core clock) * * The system clock frequency supplied to the SysTick timer and the processor * core clock. This variable can be used by the user application to setup the * SysTick timer or configure other parameters. It may also be used by debugger to * query the frequency of the debug timer or configure the trace clock speed * SystemCoreClock is initialized with a correct predefined value. */ extern uint32_t SystemCoreClock; /** * @brief Setup the microcontroller system. * * Typically this function configures the oscillator (PLL) that is part of the * microcontroller device. For systems with variable clock speed it also updates * the variable SystemCoreClock. SystemInit is called from startup_device file. */ void SystemInit (void); /** * @brief Updates the SystemCoreClock variable. * * It must be called whenever the core clock is changed during program * execution. SystemCoreClockUpdate() evaluates the clock register settings and calculates * the current core clock. */ void SystemCoreClockUpdate (void); #ifdef __cplusplus } #endif #endif /* #if !defined(SYSTEM_MKL46Z4_H_) */