Fork of mbed-src file paths change. LPC1114FN28 use only.
Fork of mbed-src by
Information
この情報は2013/10/28時点での解決方法です。
現在はmbed-src、標準ライブラリで問題なくコンパイルが可能です。
・使う物
LPC1114FN28
mbed SDK
LPC1114FN28でmbed-SDKのLibraryを使うとCompile出来ない。(2013/10/28)
パスが通ってないだけのようなのでファイルを以下に移動する。
mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\ mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\ |
にあるファイルをすべて
mbed-src\targets\cmsis\TARGET_NXP\ |
へ移動
mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\にある
TOOLCHAIN_ARM_MICRO |
をフォルダごと
mbed-src\targets\cmsis\TARGET_NXP\ |
へ移動
mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\ mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\ |
にあるファイルをすべて
mbed-src\targets\hal\TARGET_NXP\ |
へ移動
移動後は以下のような構成になると思います。
※不要なファイルは削除してあります。
ファイルの移動が面倒なので以下に本家からフォークしたライブラリを置いておきます。
Import librarymbed-src-LPC1114FN28
Fork of mbed-src file paths change. LPC1114FN28 use only.
エラーが出力される場合
"TOOLCHAIN_ARM_MICRO"が無いとエラーになる。
Error: Undefined symbol _initial_sp (referred from entry2.o). Error: Undefined symbol _heap_base (referred from malloc.o). Error: Undefined symbol _heap_limit (referred from malloc.o). |
LPC1114FN28はMicrolibを使ってCompileされるため上記のエラーになるようです。
Diff: targets/hal/TARGET_STM/TARGET_STM32F4XX/gpio_api.c
- Revision:
- 43:b3acfef78949
- Parent:
- 42:7ca0bbba899b
--- a/targets/hal/TARGET_STM/TARGET_STM32F4XX/gpio_api.c Sun Oct 27 16:30:04 2013 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,61 +0,0 @@ -/* mbed Microcontroller Library - * Copyright (c) 2006-2013 ARM Limited - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ -#include "gpio_api.h" -#include "pinmap.h" - -uint32_t gpio_set(PinName pin) { - uint32_t port_index = (uint32_t) pin >> 4; - - // Enable GPIO peripheral clock - RCC->AHB1ENR |= 1 << port_index; - - pin_function(pin, STM_PIN_DATA(0, 0)); - return 1 << ((uint32_t) pin & 0xF); -} - -void gpio_init(gpio_t *obj, PinName pin, PinDirection direction) { - if(pin == NC) return; - - obj->pin = pin; - obj->mask = gpio_set(pin); - - uint32_t port_index = (uint32_t) pin >> 4; - - GPIO_TypeDef *port_reg = (GPIO_TypeDef *) (GPIOA_BASE + (port_index << 10)); - obj->reg_mode = &port_reg->MODER; - obj->reg_set = &port_reg->BSRRL; - obj->reg_clr = &port_reg->BSRRH; - obj->reg_in = &port_reg->IDR; - - - gpio_dir(obj, direction); - - switch (direction) { - case PIN_OUTPUT: pin_mode(pin, PullNone); break; - case PIN_INPUT : pin_mode(pin, PullDown); break; - } -} - -void gpio_mode(gpio_t *obj, PinMode mode) { - pin_mode(obj->pin, mode); -} - -void gpio_dir(gpio_t *obj, PinDirection direction) { - switch (direction) { - case PIN_INPUT : pin_function(obj->pin, STM_PIN_DATA(0, 0)); break; - case PIN_OUTPUT: pin_function(obj->pin, STM_PIN_DATA(1, 0)); break; - } -}