Fork of mbed-src file paths change. LPC1114FN28 use only.
Fork of mbed-src by
Information
この情報は2013/10/28時点での解決方法です。
現在はmbed-src、標準ライブラリで問題なくコンパイルが可能です。
・使う物
LPC1114FN28
mbed SDK
LPC1114FN28でmbed-SDKのLibraryを使うとCompile出来ない。(2013/10/28)
パスが通ってないだけのようなのでファイルを以下に移動する。
mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\ mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\ |
にあるファイルをすべて
mbed-src\targets\cmsis\TARGET_NXP\ |
へ移動
mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\にある
TOOLCHAIN_ARM_MICRO |
をフォルダごと
mbed-src\targets\cmsis\TARGET_NXP\ |
へ移動
mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\ mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\ |
にあるファイルをすべて
mbed-src\targets\hal\TARGET_NXP\ |
へ移動
移動後は以下のような構成になると思います。
※不要なファイルは削除してあります。
ファイルの移動が面倒なので以下に本家からフォークしたライブラリを置いておきます。
Import librarymbed-src-LPC1114FN28
Fork of mbed-src file paths change. LPC1114FN28 use only.
エラーが出力される場合
"TOOLCHAIN_ARM_MICRO"が無いとエラーになる。
Error: Undefined symbol _initial_sp (referred from entry2.o). Error: Undefined symbol _heap_base (referred from malloc.o). Error: Undefined symbol _heap_limit (referred from malloc.o). |
LPC1114FN28はMicrolibを使ってCompileされるため上記のエラーになるようです。
Diff: targets/hal/TARGET_NXP/TARGET_LPC81X/TARGET_LPC81X_COMMON/pinmap.c
- Revision:
- 43:b3acfef78949
- Parent:
- 42:7ca0bbba899b
--- a/targets/hal/TARGET_NXP/TARGET_LPC81X/TARGET_LPC81X_COMMON/pinmap.c Sun Oct 27 16:30:04 2013 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,50 +0,0 @@ -/* mbed Microcontroller Library - * Copyright (c) 2006-2013 ARM Limited - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ -#include "pinmap.h" -#include "error.h" - -__IO uint32_t* IOCON_REGISTERS[18] = { - &LPC_IOCON->PIO0_0 , &LPC_IOCON->PIO0_1 , &LPC_IOCON->PIO0_2 , - &LPC_IOCON->PIO0_3 , &LPC_IOCON->PIO0_4 , &LPC_IOCON->PIO0_5 , - &LPC_IOCON->PIO0_6 , &LPC_IOCON->PIO0_7 , &LPC_IOCON->PIO0_8 , - &LPC_IOCON->PIO0_9 , &LPC_IOCON->PIO0_10, &LPC_IOCON->PIO0_11, - &LPC_IOCON->PIO0_12, &LPC_IOCON->PIO0_13, &LPC_IOCON->PIO0_14, - &LPC_IOCON->PIO0_15, &LPC_IOCON->PIO0_16, &LPC_IOCON->PIO0_17, -}; - -void pin_function(PinName pin, int function) { - -} - -void pin_mode(PinName pin, PinMode mode) { - if (pin == (uint32_t)NC) { return; } - - if ((pin == 10) || (pin == 11)) { - // True open-drain pins can be configured for different I2C-bus speeds - return; - } - - __IO uint32_t *reg = IOCON_REGISTERS[pin]; - - if (mode == OpenDrain) { - *reg |= (1 << 10); - } else { - uint32_t tmp = *reg; - tmp &= ~(0x3 << 3); - tmp |= (mode & 0x3) << 3; - *reg = tmp; - } -}