Fork of mbed-src file paths change. LPC1114FN28 use only.
Fork of mbed-src by
Information
この情報は2013/10/28時点での解決方法です。
現在はmbed-src、標準ライブラリで問題なくコンパイルが可能です。
・使う物
LPC1114FN28
mbed SDK
LPC1114FN28でmbed-SDKのLibraryを使うとCompile出来ない。(2013/10/28)
パスが通ってないだけのようなのでファイルを以下に移動する。
mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\ mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\ |
にあるファイルをすべて
mbed-src\targets\cmsis\TARGET_NXP\ |
へ移動
mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\にある
TOOLCHAIN_ARM_MICRO |
をフォルダごと
mbed-src\targets\cmsis\TARGET_NXP\ |
へ移動
mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\ mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\ |
にあるファイルをすべて
mbed-src\targets\hal\TARGET_NXP\ |
へ移動
移動後は以下のような構成になると思います。
※不要なファイルは削除してあります。
ファイルの移動が面倒なので以下に本家からフォークしたライブラリを置いておきます。
Import librarymbed-src-LPC1114FN28
Fork of mbed-src file paths change. LPC1114FN28 use only.
エラーが出力される場合
"TOOLCHAIN_ARM_MICRO"が無いとエラーになる。
Error: Undefined symbol _initial_sp (referred from entry2.o). Error: Undefined symbol _heap_base (referred from malloc.o). Error: Undefined symbol _heap_limit (referred from malloc.o). |
LPC1114FN28はMicrolibを使ってCompileされるため上記のエラーになるようです。
Diff: targets/hal/TARGET_NXP/TARGET_LPC176X/analogout_api.c
- Revision:
- 43:b3acfef78949
- Parent:
- 42:7ca0bbba899b
--- a/targets/hal/TARGET_NXP/TARGET_LPC176X/analogout_api.c Sun Oct 27 16:30:04 2013 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,78 +0,0 @@ -/* mbed Microcontroller Library - * Copyright (c) 2006-2013 ARM Limited - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ -#include "analogout_api.h" - -#include "cmsis.h" -#include "pinmap.h" -#include "error.h" - -static const PinMap PinMap_DAC[] = { - {P0_26, DAC_0, 2}, - {NC , NC , 0} -}; - -void analogout_init(dac_t *obj, PinName pin) { - obj->dac = (DACName)pinmap_peripheral(pin, PinMap_DAC); - if (obj->dac == (DACName)NC) { - error("DAC pin mapping failed"); - } - - // power is on by default, set DAC clk divider is /4 - LPC_SC->PCLKSEL0 &= ~(0x3 << 22); - - // map out (must be done before accessing registers) - pinmap_pinout(pin, PinMap_DAC); - - analogout_write_u16(obj, 0); -} - -void analogout_free(dac_t *obj) {} - -static inline void dac_write(int value) { - value &= 0x3FF; // 10-bit - - // Set the DAC output - LPC_DAC->DACR = (0 << 16) // bias = 0 - | (value << 6); -} - -static inline int dac_read() { - return (LPC_DAC->DACR >> 6) & 0x3FF; -} - -void analogout_write(dac_t *obj, float value) { - if (value < 0.0f) { - dac_write(0); - } else if (value > 1.0f) { - dac_write(0x3FF); - } else { - dac_write(value * (float)0x3FF); - } -} - -void analogout_write_u16(dac_t *obj, uint16_t value) { - dac_write(value >> 6); // 10-bit -} - -float analogout_read(dac_t *obj) { - uint32_t value = dac_read(); - return (float)value * (1.0f / (float)0x3FF); -} - -uint16_t analogout_read_u16(dac_t *obj) { - uint32_t value = dac_read(); // 10-bit - return (value << 6) | ((value >> 4) & 0x003F); -}