Fork of mbed-src file paths change. LPC1114FN28 use only.
Fork of mbed-src by
Information
この情報は2013/10/28時点での解決方法です。
現在はmbed-src、標準ライブラリで問題なくコンパイルが可能です。
・使う物
LPC1114FN28
mbed SDK
LPC1114FN28でmbed-SDKのLibraryを使うとCompile出来ない。(2013/10/28)
パスが通ってないだけのようなのでファイルを以下に移動する。
mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\ mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\ |
にあるファイルをすべて
mbed-src\targets\cmsis\TARGET_NXP\ |
へ移動
mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\にある
TOOLCHAIN_ARM_MICRO |
をフォルダごと
mbed-src\targets\cmsis\TARGET_NXP\ |
へ移動
mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\ mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\ |
にあるファイルをすべて
mbed-src\targets\hal\TARGET_NXP\ |
へ移動
移動後は以下のような構成になると思います。
※不要なファイルは削除してあります。
ファイルの移動が面倒なので以下に本家からフォークしたライブラリを置いておきます。
Import librarymbed-src-LPC1114FN28
Fork of mbed-src file paths change. LPC1114FN28 use only.
エラーが出力される場合
"TOOLCHAIN_ARM_MICRO"が無いとエラーになる。
Error: Undefined symbol _initial_sp (referred from entry2.o). Error: Undefined symbol _heap_base (referred from malloc.o). Error: Undefined symbol _heap_limit (referred from malloc.o). |
LPC1114FN28はMicrolibを使ってCompileされるため上記のエラーになるようです。
Diff: targets/cmsis/TARGET_STM/TARGET_STM32F4XX/system_stm32f4xx.c
- Revision:
- 43:b3acfef78949
- Parent:
- 42:7ca0bbba899b
--- a/targets/cmsis/TARGET_STM/TARGET_STM32F4XX/system_stm32f4xx.c Sun Oct 27 16:30:04 2013 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,573 +0,0 @@ -/** - ****************************************************************************** - * @file system_stm32f4xx.c - * @author MCD Application Team - * @version V1.1.0 - * @date 11-January-2013 - * @brief CMSIS Cortex-M4 Device Peripheral Access Layer System Source File. - * This file contains the system clock configuration for STM32F4xx devices, - * and is generated by the clock configuration tool - * stm32f4xx_Clock_Configuration_V1.1.0.xls - * - * 1. This file provides two functions and one global variable to be called from - * user application: - * - SystemInit(): Setups the system clock (System clock source, PLL Multiplier - * and Divider factors, AHB/APBx prescalers and Flash settings), - * depending on the configuration made in the clock xls tool. - * This function is called at startup just after reset and - * before branch to main program. This call is made inside - * the "startup_stm32f4xx.s" file. - * - * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used - * by the user application to setup the SysTick - * timer or configure other parameters. - * - * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must - * be called whenever the core clock is changed - * during program execution. - * - * 2. After each device reset the HSI (16 MHz) is used as system clock source. - * Then SystemInit() function is called, in "startup_stm32f4xx.s" file, to - * configure the system clock before to branch to main program. - * - * 3. If the system clock source selected by user fails to startup, the SystemInit() - * function will do nothing and HSI still used as system clock source. User can - * add some code to deal with this issue inside the SetSysClock() function. - * - * 4. The default value of HSE crystal is set to 25MHz, refer to "HSE_VALUE" define - * in "stm32f4xx.h" file. When HSE is used as system clock source, directly or - * through PLL, and you are using different crystal you have to adapt the HSE - * value to your own configuration. - * - * 5. This file configures the system clock as follows: - *============================================================================= - *============================================================================= - * Supported STM32F40xx/41xx/427x/437x devices - *----------------------------------------------------------------------------- - * System Clock source | PLL (HSE) - *----------------------------------------------------------------------------- - * SYSCLK(Hz) | 168000000 - *----------------------------------------------------------------------------- - * HCLK(Hz) | 168000000 - *----------------------------------------------------------------------------- - * AHB Prescaler | 1 - *----------------------------------------------------------------------------- - * APB1 Prescaler | 4 - *----------------------------------------------------------------------------- - * APB2 Prescaler | 2 - *----------------------------------------------------------------------------- - * HSE Frequency(Hz) | 8000000 - *----------------------------------------------------------------------------- - * PLL_M | 8 - *----------------------------------------------------------------------------- - * PLL_N | 336 - *----------------------------------------------------------------------------- - * PLL_P | 2 - *----------------------------------------------------------------------------- - * PLL_Q | 7 - *----------------------------------------------------------------------------- - * PLLI2S_N | 271 - *----------------------------------------------------------------------------- - * PLLI2S_R | 2 - *----------------------------------------------------------------------------- - * I2S input clock | NA - *----------------------------------------------------------------------------- - * VDD(V) | 3.3 - *----------------------------------------------------------------------------- - * Main regulator output voltage | Scale1 mode - *----------------------------------------------------------------------------- - * Flash Latency(WS) | 5 - *----------------------------------------------------------------------------- - * Prefetch Buffer | ON - *----------------------------------------------------------------------------- - * Instruction cache | ON - *----------------------------------------------------------------------------- - * Data cache | ON - *----------------------------------------------------------------------------- - * Require 48MHz for USB OTG FS, | Disabled - * SDIO and RNG clock | - *----------------------------------------------------------------------------- - *============================================================================= - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT 2013 STMicroelectronics</center></h2> - * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -/** @addtogroup CMSIS - * @{ - */ - -/** @addtogroup stm32f4xx_system - * @{ - */ - -/** @addtogroup STM32F4xx_System_Private_Includes - * @{ - */ - -#include "stm32f4xx.h" - -/** - * @} - */ - -/** @addtogroup STM32F4xx_System_Private_TypesDefinitions - * @{ - */ - -/** - * @} - */ - -/** @addtogroup STM32F4xx_System_Private_Defines - * @{ - */ - -/************************* Miscellaneous Configuration ************************/ -/*!< Uncomment the following line if you need to use external SRAM mounted - on STM324xG_EVAL/STM324x7I_EVAL boards as data memory */ -/* #define DATA_IN_ExtSRAM */ - -/*!< Uncomment the following line if you need to relocate your vector Table in - Internal SRAM. */ -/* #define VECT_TAB_SRAM */ -#define VECT_TAB_OFFSET 0x00 /*!< Vector Table base offset field. - This value must be a multiple of 0x200. */ -/******************************************************************************/ - -/************************* PLL Parameters *************************************/ -/* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLL_M) * PLL_N */ -#define PLL_M 8 -#define PLL_N 336 - -/* SYSCLK = PLL_VCO / PLL_P */ -#define PLL_P 2 - -/* USB OTG FS, SDIO and RNG Clock = PLL_VCO / PLLQ */ -#define PLL_Q 7 - -#define PLLI2S_N 271 -#define PLLI2S_R 2 - -/******************************************************************************/ - -/** - * @} - */ - -/** @addtogroup STM32F4xx_System_Private_Macros - * @{ - */ - -/** - * @} - */ - -/** @addtogroup STM32F4xx_System_Private_Variables - * @{ - */ - - uint32_t SystemCoreClock = 168000000; - - __I uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9}; - -/** - * @} - */ - -/** @addtogroup STM32F4xx_System_Private_FunctionPrototypes - * @{ - */ - -static void SetSysClock(void); -#ifdef DATA_IN_ExtSRAM - static void SystemInit_ExtMemCtl(void); -#endif /* DATA_IN_ExtSRAM */ - -/** - * @} - */ - -/** @addtogroup STM32F4xx_System_Private_Functions - * @{ - */ - -/** - * @brief Setup the microcontroller system - * Initialize the Embedded Flash Interface, the PLL and update the - * SystemFrequency variable. - * @param None - * @retval None - */ -void SystemInit(void) -{ - /* FPU settings ------------------------------------------------------------*/ - #if (__FPU_PRESENT == 1) && (__FPU_USED == 1) - SCB->CPACR |= ((3UL << 10*2)|(3UL << 11*2)); /* set CP10 and CP11 Full Access */ - #endif - /* Reset the RCC clock configuration to the default reset state ------------*/ - /* Set HSION bit */ - RCC->CR |= (uint32_t)0x00000001; - - /* Reset CFGR register */ - RCC->CFGR = 0x00000000; - - /* Reset HSEON, CSSON and PLLON bits */ - RCC->CR &= (uint32_t)0xFEF6FFFF; - - /* Reset PLLCFGR register */ - RCC->PLLCFGR = 0x24003010; - - /* Reset HSEBYP bit */ - RCC->CR &= (uint32_t)0xFFFBFFFF; - - /* Disable all interrupts */ - RCC->CIR = 0x00000000; - -#ifdef DATA_IN_ExtSRAM - SystemInit_ExtMemCtl(); -#endif /* DATA_IN_ExtSRAM */ - - /* Configure the System clock source, PLL Multiplier and Divider factors, - AHB/APBx prescalers and Flash settings ----------------------------------*/ - SetSysClock(); - - /* Configure the Vector Table location add offset address ------------------*/ -#ifdef VECT_TAB_SRAM - SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */ -#else - SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */ -#endif -} - -/** - * @brief Update SystemCoreClock variable according to Clock Register Values. - * The SystemCoreClock variable contains the core clock (HCLK), it can - * be used by the user application to setup the SysTick timer or configure - * other parameters. - * - * @note Each time the core clock (HCLK) changes, this function must be called - * to update SystemCoreClock variable value. Otherwise, any configuration - * based on this variable will be incorrect. - * - * @note - The system frequency computed by this function is not the real - * frequency in the chip. It is calculated based on the predefined - * constant and the selected clock source: - * - * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*) - * - * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**) - * - * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**) - * or HSI_VALUE(*) multiplied/divided by the PLL factors. - * - * (*) HSI_VALUE is a constant defined in stm32f4xx.h file (default value - * 16 MHz) but the real value may vary depending on the variations - * in voltage and temperature. - * - * (**) HSE_VALUE is a constant defined in stm32f4xx.h file (default value - * 25 MHz), user has to ensure that HSE_VALUE is same as the real - * frequency of the crystal used. Otherwise, this function may - * have wrong result. - * - * - The result of this function could be not correct when using fractional - * value for HSE crystal. - * - * @param None - * @retval None - */ -void SystemCoreClockUpdate(void) -{ - uint32_t tmp = 0, pllvco = 0, pllp = 2, pllsource = 0, pllm = 2; - - /* Get SYSCLK source -------------------------------------------------------*/ - tmp = RCC->CFGR & RCC_CFGR_SWS; - - switch (tmp) - { - case 0x00: /* HSI used as system clock source */ - SystemCoreClock = HSI_VALUE; - break; - case 0x04: /* HSE used as system clock source */ - SystemCoreClock = HSE_VALUE; - break; - case 0x08: /* PLL used as system clock source */ - - /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLL_M) * PLL_N - SYSCLK = PLL_VCO / PLL_P - */ - pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) >> 22; - pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM; - - if (pllsource != 0) - { - /* HSE used as PLL clock source */ - pllvco = (HSE_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6); - } - else - { - /* HSI used as PLL clock source */ - pllvco = (HSI_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6); - } - - pllp = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >>16) + 1 ) *2; - SystemCoreClock = pllvco/pllp; - break; - default: - SystemCoreClock = HSI_VALUE; - break; - } - /* Compute HCLK frequency --------------------------------------------------*/ - /* Get HCLK prescaler */ - tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)]; - /* HCLK frequency */ - SystemCoreClock >>= tmp; -} - -/** - * @brief Configures the System clock source, PLL Multiplier and Divider factors, - * AHB/APBx prescalers and Flash settings - * @Note This function should be called only once the RCC clock configuration - * is reset to the default reset state (done in SystemInit() function). - * @param None - * @retval None - */ -static void SetSysClock(void) -{ -/******************************************************************************/ -/* PLL (clocked by HSE) used as System clock source */ -/******************************************************************************/ - __IO uint32_t StartUpCounter = 0, HSEStatus = 0; - - /* Enable HSE */ - RCC->CR |= ((uint32_t)RCC_CR_HSEON); - - /* Wait till HSE is ready and if Time out is reached exit */ - do - { - HSEStatus = RCC->CR & RCC_CR_HSERDY; - StartUpCounter++; - } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); - - if ((RCC->CR & RCC_CR_HSERDY) != RESET) - { - HSEStatus = (uint32_t)0x01; - } - else - { - HSEStatus = (uint32_t)0x00; - } - - if (HSEStatus == (uint32_t)0x01) - { - /* Select regulator voltage output Scale 1 mode, System frequency up to 168 MHz */ - RCC->APB1ENR |= RCC_APB1ENR_PWREN; - PWR->CR |= PWR_CR_VOS; - - /* HCLK = SYSCLK / 1*/ - RCC->CFGR |= RCC_CFGR_HPRE_DIV1; - - /* PCLK2 = HCLK / 2*/ - RCC->CFGR |= RCC_CFGR_PPRE2_DIV2; - - /* PCLK1 = HCLK / 4*/ - RCC->CFGR |= RCC_CFGR_PPRE1_DIV4; - - /* Configure the main PLL */ - RCC->PLLCFGR = PLL_M | (PLL_N << 6) | (((PLL_P >> 1) -1) << 16) | - (RCC_PLLCFGR_PLLSRC_HSE) | (PLL_Q << 24); - - /* Enable the main PLL */ - RCC->CR |= RCC_CR_PLLON; - - /* Wait till the main PLL is ready */ - while((RCC->CR & RCC_CR_PLLRDY) == 0) - { - } - - /* Configure the I2S PLL */ - RCC->PLLI2SCFGR = (PLLI2S_N << 6) | (PLLI2S_R << 28); - - /* Enable the I2S PLL */ - RCC->CR |= RCC_CR_PLLI2SON; - - /* Wait until the I2S PLL is ready */ - while (!(RCC->CR & RCC_CR_PLLI2SRDY)); - - /* Configure Flash prefetch, Instruction cache, Data cache and wait state */ - FLASH->ACR = FLASH_ACR_PRFTEN |FLASH_ACR_ICEN |FLASH_ACR_DCEN |FLASH_ACR_LATENCY_5WS; - - /* Select the main PLL as system clock source */ - RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); - RCC->CFGR |= RCC_CFGR_SW_PLL; - - /* Wait till the main PLL is used as system clock source */ - while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS ) != RCC_CFGR_SWS_PLL); - { - } - } - else - { /* If HSE fails to start-up, the application will have wrong clock - configuration. User can add here some code to deal with this error */ - } - -} - -/** - * @brief Setup the external memory controller. Called in startup_stm32f4xx.s - * before jump to __main - * @param None - * @retval None - */ -#ifdef DATA_IN_ExtSRAM -/** - * @brief Setup the external memory controller. - * Called in startup_stm32f4xx.s before jump to main. - * This function configures the external SRAM mounted on STM324xG_EVAL/STM324x7I boards - * This SRAM will be used as program data memory (including heap and stack). - * @param None - * @retval None - */ -void SystemInit_ExtMemCtl(void) -{ -/*-- GPIOs Configuration -----------------------------------------------------*/ -/* - +-------------------+--------------------+------------------+------------------+ - + SRAM pins assignment + - +-------------------+--------------------+------------------+------------------+ - | PD0 <-> FSMC_D2 | PE0 <-> FSMC_NBL0 | PF0 <-> FSMC_A0 | PG0 <-> FSMC_A10 | - | PD1 <-> FSMC_D3 | PE1 <-> FSMC_NBL1 | PF1 <-> FSMC_A1 | PG1 <-> FSMC_A11 | - | PD4 <-> FSMC_NOE | PE2 <-> FSMC_A23 | PF2 <-> FSMC_A2 | PG2 <-> FSMC_A12 | - | PD5 <-> FSMC_NWE | PE3 <-> FSMC_A19 | PF3 <-> FSMC_A3 | PG3 <-> FSMC_A13 | - | PD8 <-> FSMC_D13 | PE4 <-> FSMC_A20 | PF4 <-> FSMC_A4 | PG4 <-> FSMC_A14 | - | PD9 <-> FSMC_D14 | PE5 <-> FSMC_A21 | PF5 <-> FSMC_A5 | PG5 <-> FSMC_A15 | - | PD10 <-> FSMC_D15 | PE6 <-> FSMC_A22 | PF12 <-> FSMC_A6 | PG9 <-> FSMC_NE2 | - | PD11 <-> FSMC_A16 | PE7 <-> FSMC_D4 | PF13 <-> FSMC_A7 |------------------+ - | PD12 <-> FSMC_A17 | PE8 <-> FSMC_D5 | PF14 <-> FSMC_A8 | - | PD13 <-> FSMC_A18 | PE9 <-> FSMC_D6 | PF15 <-> FSMC_A9 | - | PD14 <-> FSMC_D0 | PE10 <-> FSMC_D7 |------------------+ - | PD15 <-> FSMC_D1 | PE11 <-> FSMC_D8 | - +-------------------| PE12 <-> FSMC_D9 | - | PE13 <-> FSMC_D10 | - | PE14 <-> FSMC_D11 | - | PE15 <-> FSMC_D12 | - +--------------------+ -*/ - /* Enable GPIOD, GPIOE, GPIOF and GPIOG interface clock */ - RCC->AHB1ENR |= 0x00000078; - - /* Connect PDx pins to FSMC Alternate function */ - GPIOD->AFR[0] = 0x00cc00cc; - GPIOD->AFR[1] = 0xcccccccc; - /* Configure PDx pins in Alternate function mode */ - GPIOD->MODER = 0xaaaa0a0a; - /* Configure PDx pins speed to 100 MHz */ - GPIOD->OSPEEDR = 0xffff0f0f; - /* Configure PDx pins Output type to push-pull */ - GPIOD->OTYPER = 0x00000000; - /* No pull-up, pull-down for PDx pins */ - GPIOD->PUPDR = 0x00000000; - - /* Connect PEx pins to FSMC Alternate function */ - GPIOE->AFR[0] = 0xcccccccc; - GPIOE->AFR[1] = 0xcccccccc; - /* Configure PEx pins in Alternate function mode */ - GPIOE->MODER = 0xaaaaaaaa; - /* Configure PEx pins speed to 100 MHz */ - GPIOE->OSPEEDR = 0xffffffff; - /* Configure PEx pins Output type to push-pull */ - GPIOE->OTYPER = 0x00000000; - /* No pull-up, pull-down for PEx pins */ - GPIOE->PUPDR = 0x00000000; - - /* Connect PFx pins to FSMC Alternate function */ - GPIOF->AFR[0] = 0x00cccccc; - GPIOF->AFR[1] = 0xcccc0000; - /* Configure PFx pins in Alternate function mode */ - GPIOF->MODER = 0xaa000aaa; - /* Configure PFx pins speed to 100 MHz */ - GPIOF->OSPEEDR = 0xff000fff; - /* Configure PFx pins Output type to push-pull */ - GPIOF->OTYPER = 0x00000000; - /* No pull-up, pull-down for PFx pins */ - GPIOF->PUPDR = 0x00000000; - - /* Connect PGx pins to FSMC Alternate function */ - GPIOG->AFR[0] = 0x00cccccc; - GPIOG->AFR[1] = 0x000000c0; - /* Configure PGx pins in Alternate function mode */ - GPIOG->MODER = 0x00080aaa; - /* Configure PGx pins speed to 100 MHz */ - GPIOG->OSPEEDR = 0x000c0fff; - /* Configure PGx pins Output type to push-pull */ - GPIOG->OTYPER = 0x00000000; - /* No pull-up, pull-down for PGx pins */ - GPIOG->PUPDR = 0x00000000; - -/*-- FSMC Configuration ------------------------------------------------------*/ - /* Enable the FSMC interface clock */ - RCC->AHB3ENR |= 0x00000001; - - /* Configure and enable Bank1_SRAM2 */ - FSMC_Bank1->BTCR[2] = 0x00001011; - FSMC_Bank1->BTCR[3] = 0x00000201; - FSMC_Bank1E->BWTR[2] = 0x0fffffff; -/* - Bank1_SRAM2 is configured as follow: - - p.FSMC_AddressSetupTime = 1; - p.FSMC_AddressHoldTime = 0; - p.FSMC_DataSetupTime = 2; - p.FSMC_BusTurnAroundDuration = 0; - p.FSMC_CLKDivision = 0; - p.FSMC_DataLatency = 0; - p.FSMC_AccessMode = FSMC_AccessMode_A; - - FSMC_NORSRAMInitStructure.FSMC_Bank = FSMC_Bank1_NORSRAM2; - FSMC_NORSRAMInitStructure.FSMC_DataAddressMux = FSMC_DataAddressMux_Disable; - FSMC_NORSRAMInitStructure.FSMC_MemoryType = FSMC_MemoryType_SRAM; - FSMC_NORSRAMInitStructure.FSMC_MemoryDataWidth = FSMC_MemoryDataWidth_16b; - FSMC_NORSRAMInitStructure.FSMC_BurstAccessMode = FSMC_BurstAccessMode_Disable; - FSMC_NORSRAMInitStructure.FSMC_AsynchronousWait = FSMC_AsynchronousWait_Disable; - FSMC_NORSRAMInitStructure.FSMC_WaitSignalPolarity = FSMC_WaitSignalPolarity_Low; - FSMC_NORSRAMInitStructure.FSMC_WrapMode = FSMC_WrapMode_Disable; - FSMC_NORSRAMInitStructure.FSMC_WaitSignalActive = FSMC_WaitSignalActive_BeforeWaitState; - FSMC_NORSRAMInitStructure.FSMC_WriteOperation = FSMC_WriteOperation_Enable; - FSMC_NORSRAMInitStructure.FSMC_WaitSignal = FSMC_WaitSignal_Disable; - FSMC_NORSRAMInitStructure.FSMC_ExtendedMode = FSMC_ExtendedMode_Disable; - FSMC_NORSRAMInitStructure.FSMC_WriteBurst = FSMC_WriteBurst_Disable; - FSMC_NORSRAMInitStructure.FSMC_ReadWriteTimingStruct = &p; - FSMC_NORSRAMInitStructure.FSMC_WriteTimingStruct = &p; -*/ -} -#endif /* DATA_IN_ExtSRAM */ - - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ -