Fork of mbed-src file paths change. LPC1114FN28 use only.
Fork of mbed-src by
Information
この情報は2013/10/28時点での解決方法です。
現在はmbed-src、標準ライブラリで問題なくコンパイルが可能です。
・使う物
LPC1114FN28
mbed SDK
LPC1114FN28でmbed-SDKのLibraryを使うとCompile出来ない。(2013/10/28)
パスが通ってないだけのようなのでファイルを以下に移動する。
mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\ mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\ |
にあるファイルをすべて
mbed-src\targets\cmsis\TARGET_NXP\ |
へ移動
mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\にある
TOOLCHAIN_ARM_MICRO |
をフォルダごと
mbed-src\targets\cmsis\TARGET_NXP\ |
へ移動
mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\ mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\ |
にあるファイルをすべて
mbed-src\targets\hal\TARGET_NXP\ |
へ移動
移動後は以下のような構成になると思います。
※不要なファイルは削除してあります。
ファイルの移動が面倒なので以下に本家からフォークしたライブラリを置いておきます。
Import librarymbed-src-LPC1114FN28
Fork of mbed-src file paths change. LPC1114FN28 use only.
エラーが出力される場合
"TOOLCHAIN_ARM_MICRO"が無いとエラーになる。
Error: Undefined symbol _initial_sp (referred from entry2.o). Error: Undefined symbol _heap_base (referred from malloc.o). Error: Undefined symbol _heap_limit (referred from malloc.o). |
LPC1114FN28はMicrolibを使ってCompileされるため上記のエラーになるようです。
Diff: targets/cmsis/TARGET_NXP/TARGET_LPC23XX/vector_defns.h
- Revision:
- 43:b3acfef78949
- Parent:
- 42:7ca0bbba899b
--- a/targets/cmsis/TARGET_NXP/TARGET_LPC23XX/vector_defns.h Sun Oct 27 16:30:04 2013 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,77 +0,0 @@ -/* mbed Microcontroller Library - Vectors - * Copyright (c) 2006-2009 ARM Limited. All rights reserved. - */ - -#ifndef MBED_VECTOR_DEFNS_H -#define MBED_VECTOR_DEFNS_H - -// Assember Macros -#ifdef __ARMCC_VERSION -#define EXPORT(x) EXPORT x -#define WEAK_EXPORT(x) EXPORT x [WEAK] -#define IMPORT(x) IMPORT x -#define LABEL(x) x -#else -#define EXPORT(x) .global x -#define WEAK_EXPORT(x) .weak x -#define IMPORT(x) .global x -#define LABEL(x) x: -#endif - -// RealMonitor -// Requires RAM (0x40000040-0x4000011F) to be allocated by the linker - -// RealMonitor entry points -#define rm_init_entry 0x7fffff91 -#define rm_undef_handler 0x7fffffa0 -#define rm_prefetchabort_handler 0x7fffffb0 -#define rm_dataabort_handler 0x7fffffc0 -#define rm_irqhandler2 0x7fffffe0 -//#define rm_RunningToStopped 0x7ffff808 // ARM - MBED64 -#define rm_RunningToStopped 0x7ffff820 // ARM - PHAT40 - -// Unofficial RealMonitor entry points and variables -#define RM_MSG_SWI 0x00940000 -#define StateP 0x40000040 - -// VIC register addresses -#define VIC_Base 0xfffff000 -#define VICAddress_Offset 0xf00 -#define VICVectAddr0_Offset 0x100 -#define VICVectAddr2_Offset 0x108 -#define VICVectAddr3_Offset 0x10c -#define VICVectAddr31_Offset 0x17c -#define VICIntEnClr_Offset 0x014 -#define VICIntEnClr (*(volatile unsigned long *)(VIC_Base + 0x014)) -#define VICVectAddr2 (*(volatile unsigned long *)(VIC_Base + 0x108)) -#define VICVectAddr3 (*(volatile unsigned long *)(VIC_Base + 0x10C)) - -// ARM Mode bits and Interrupt flags in PSRs -#define Mode_USR 0x10 -#define Mode_FIQ 0x11 -#define Mode_IRQ 0x12 -#define Mode_SVC 0x13 -#define Mode_ABT 0x17 -#define Mode_UND 0x1B -#define Mode_SYS 0x1F -#define I_Bit 0x80 // when I bit is set, IRQ is disabled -#define F_Bit 0x40 // when F bit is set, FIQ is disabled - -// MCU RAM -#define LPC2368_RAM_ADDRESS 0x40000000 // RAM Base -#define LPC2368_RAM_SIZE 0x8000 // 32KB - -// ISR Stack Allocation -#define UND_stack_size 0x00000040 -#define SVC_stack_size 0x00000040 -#define ABT_stack_size 0x00000040 -#define FIQ_stack_size 0x00000000 -#define IRQ_stack_size 0x00000040 - -#define ISR_stack_size (UND_stack_size + SVC_stack_size + ABT_stack_size + FIQ_stack_size + IRQ_stack_size) - -// Full Descending Stack, so top-most stack points to just above the top of RAM -#define LPC2368_STACK_TOP (LPC2368_RAM_ADDRESS + LPC2368_RAM_SIZE) -#define USR_STACK_TOP (LPC2368_STACK_TOP - ISR_stack_size) - -#endif