Fork of mbed-src file paths change. LPC1114FN28 use only.
Fork of mbed-src by
Information
この情報は2013/10/28時点での解決方法です。
現在はmbed-src、標準ライブラリで問題なくコンパイルが可能です。
・使う物
LPC1114FN28
mbed SDK
LPC1114FN28でmbed-SDKのLibraryを使うとCompile出来ない。(2013/10/28)
パスが通ってないだけのようなのでファイルを以下に移動する。
mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\ mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\ |
にあるファイルをすべて
mbed-src\targets\cmsis\TARGET_NXP\ |
へ移動
mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\にある
TOOLCHAIN_ARM_MICRO |
をフォルダごと
mbed-src\targets\cmsis\TARGET_NXP\ |
へ移動
mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\ mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\ |
にあるファイルをすべて
mbed-src\targets\hal\TARGET_NXP\ |
へ移動
移動後は以下のような構成になると思います。
※不要なファイルは削除してあります。
ファイルの移動が面倒なので以下に本家からフォークしたライブラリを置いておきます。
Import librarymbed-src-LPC1114FN28
Fork of mbed-src file paths change. LPC1114FN28 use only.
エラーが出力される場合
"TOOLCHAIN_ARM_MICRO"が無いとエラーになる。
Error: Undefined symbol _initial_sp (referred from entry2.o). Error: Undefined symbol _heap_base (referred from malloc.o). Error: Undefined symbol _heap_limit (referred from malloc.o). |
LPC1114FN28はMicrolibを使ってCompileされるため上記のエラーになるようです。
Diff: targets/cmsis/TARGET_NXP/TARGET_LPC176X/TOOLCHAIN_GCC_ARM/startup_LPC17xx.s
- Revision:
- 43:b3acfef78949
- Parent:
- 42:7ca0bbba899b
--- a/targets/cmsis/TARGET_NXP/TARGET_LPC176X/TOOLCHAIN_GCC_ARM/startup_LPC17xx.s Sun Oct 27 16:30:04 2013 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,219 +0,0 @@ -/* File: startup_ARMCM3.s - * Purpose: startup file for Cortex-M3/M4 devices. Should use with - * GNU Tools for ARM Embedded Processors - * Version: V1.1 - * Date: 17 June 2011 - * - * Copyright (C) 2011 ARM Limited. All rights reserved. - * ARM Limited (ARM) is supplying this software for use with Cortex-M3/M4 - * processor based microcontrollers. This file can be freely distributed - * within development tools that are supporting such ARM based processors. - * - * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED - * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. - * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR - * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. - */ - .syntax unified - .arch armv7-m - -/* Memory Model - The HEAP starts at the end of the DATA section and grows upward. - - The STACK starts at the end of the RAM and grows downward. - - The HEAP and stack STACK are only checked at compile time: - (DATA_SIZE + HEAP_SIZE + STACK_SIZE) < RAM_SIZE - - This is just a check for the bare minimum for the Heap+Stack area before - aborting compilation, it is not the run time limit: - Heap_Size + Stack_Size = 0x80 + 0x80 = 0x100 - */ - .section .stack - .align 3 -#ifdef __STACK_SIZE - .equ Stack_Size, __STACK_SIZE -#else - .equ Stack_Size, 0xc00 -#endif - .globl __StackTop - .globl __StackLimit -__StackLimit: - .space Stack_Size - .size __StackLimit, . - __StackLimit -__StackTop: - .size __StackTop, . - __StackTop - - .section .heap - .align 3 -#ifdef __HEAP_SIZE - .equ Heap_Size, __HEAP_SIZE -#else - .equ Heap_Size, 0x800 -#endif - .globl __HeapBase - .globl __HeapLimit -__HeapBase: - .space Heap_Size - .size __HeapBase, . - __HeapBase -__HeapLimit: - .size __HeapLimit, . - __HeapLimit - - .section .isr_vector - .align 2 - .globl __isr_vector -__isr_vector: - .long __StackTop /* Top of Stack */ - .long Reset_Handler /* Reset Handler */ - .long NMI_Handler /* NMI Handler */ - .long HardFault_Handler /* Hard Fault Handler */ - .long MemManage_Handler /* MPU Fault Handler */ - .long BusFault_Handler /* Bus Fault Handler */ - .long UsageFault_Handler /* Usage Fault Handler */ - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .long SVC_Handler /* SVCall Handler */ - .long DebugMon_Handler /* Debug Monitor Handler */ - .long 0 /* Reserved */ - .long PendSV_Handler /* PendSV Handler */ - .long SysTick_Handler /* SysTick Handler */ - - /* External interrupts */ - .long WDT_IRQHandler /* 16: Watchdog Timer */ - .long TIMER0_IRQHandler /* 17: Timer0 */ - .long TIMER1_IRQHandler /* 18: Timer1 */ - .long TIMER2_IRQHandler /* 19: Timer2 */ - .long TIMER3_IRQHandler /* 20: Timer3 */ - .long UART0_IRQHandler /* 21: UART0 */ - .long UART1_IRQHandler /* 22: UART1 */ - .long UART2_IRQHandler /* 23: UART2 */ - .long UART3_IRQHandler /* 24: UART3 */ - .long PWM1_IRQHandler /* 25: PWM1 */ - .long I2C0_IRQHandler /* 26: I2C0 */ - .long I2C1_IRQHandler /* 27: I2C1 */ - .long I2C2_IRQHandler /* 28: I2C2 */ - .long SPI_IRQHandler /* 29: SPI */ - .long SSP0_IRQHandler /* 30: SSP0 */ - .long SSP1_IRQHandler /* 31: SSP1 */ - .long PLL0_IRQHandler /* 32: PLL0 Lock (Main PLL) */ - .long RTC_IRQHandler /* 33: Real Time Clock */ - .long EINT0_IRQHandler /* 34: External Interrupt 0 */ - .long EINT1_IRQHandler /* 35: External Interrupt 1 */ - .long EINT2_IRQHandler /* 36: External Interrupt 2 */ - .long EINT3_IRQHandler /* 37: External Interrupt 3 */ - .long ADC_IRQHandler /* 38: A/D Converter */ - .long BOD_IRQHandler /* 39: Brown-Out Detect */ - .long USB_IRQHandler /* 40: USB */ - .long CAN_IRQHandler /* 41: CAN */ - .long DMA_IRQHandler /* 42: General Purpose DMA */ - .long I2S_IRQHandler /* 43: I2S */ - .long ENET_IRQHandler /* 44: Ethernet */ - .long RIT_IRQHandler /* 45: Repetitive Interrupt Timer */ - .long MCPWM_IRQHandler /* 46: Motor Control PWM */ - .long QEI_IRQHandler /* 47: Quadrature Encoder Interface */ - .long PLL1_IRQHandler /* 48: PLL1 Lock (USB PLL) */ - .long USBActivity_IRQHandler /* 49: USB Activity */ - .long CANActivity_IRQHandler /* 50: CAN Activity */ - - .size __isr_vector, . - __isr_vector - - .text - .thumb - .thumb_func - .align 2 - .globl Reset_Handler - .type Reset_Handler, %function -Reset_Handler: -/* Loop to copy data from read only memory to RAM. The ranges - * of copy from/to are specified by following symbols evaluated in - * linker script. - * _etext: End of code section, i.e., begin of data sections to copy from. - * __data_start__/__data_end__: RAM address range that data should be - * copied to. Both must be aligned to 4 bytes boundary. */ - - ldr r1, =__etext - ldr r2, =__data_start__ - ldr r3, =__data_end__ - -.flash_to_ram_loop: - cmp r2, r3 - ittt lt - ldrlt r0, [r1], #4 - strlt r0, [r2], #4 - blt .flash_to_ram_loop - - ldr r0, =SystemInit - blx r0 - ldr r0, =_start - bx r0 - .pool - .size Reset_Handler, . - Reset_Handler - -/* Macro to define default handlers. Default handler - * will be weak symbol and just dead loops. They can be - * overwritten by other handlers */ - .macro def_default_handler handler_name - .align 1 - .thumb_func - .weak \handler_name - .type \handler_name, %function -\handler_name : - b . - .size \handler_name, . - \handler_name - .endm - - def_default_handler NMI_Handler - def_default_handler HardFault_Handler - def_default_handler MemManage_Handler - def_default_handler BusFault_Handler - def_default_handler UsageFault_Handler - def_default_handler SVC_Handler - def_default_handler DebugMon_Handler - def_default_handler PendSV_Handler - def_default_handler SysTick_Handler - def_default_handler Default_Handler - - def_default_handler WDT_IRQHandler - def_default_handler TIMER0_IRQHandler - def_default_handler TIMER1_IRQHandler - def_default_handler TIMER2_IRQHandler - def_default_handler TIMER3_IRQHandler - def_default_handler UART0_IRQHandler - def_default_handler UART1_IRQHandler - def_default_handler UART2_IRQHandler - def_default_handler UART3_IRQHandler - def_default_handler PWM1_IRQHandler - def_default_handler I2C0_IRQHandler - def_default_handler I2C1_IRQHandler - def_default_handler I2C2_IRQHandler - def_default_handler SPI_IRQHandler - def_default_handler SSP0_IRQHandler - def_default_handler SSP1_IRQHandler - def_default_handler PLL0_IRQHandler - def_default_handler RTC_IRQHandler - def_default_handler EINT0_IRQHandler - def_default_handler EINT1_IRQHandler - def_default_handler EINT2_IRQHandler - def_default_handler EINT3_IRQHandler - def_default_handler ADC_IRQHandler - def_default_handler BOD_IRQHandler - def_default_handler USB_IRQHandler - def_default_handler CAN_IRQHandler - def_default_handler DMA_IRQHandler - def_default_handler I2S_IRQHandler - def_default_handler ENET_IRQHandler - def_default_handler RIT_IRQHandler - def_default_handler MCPWM_IRQHandler - def_default_handler QEI_IRQHandler - def_default_handler PLL1_IRQHandler - def_default_handler USBActivity_IRQHandler - def_default_handler CANActivity_IRQHandler - - .weak DEF_IRQHandler - .set DEF_IRQHandler, Default_Handler - - .end -