Fork of mbed-src file paths change. LPC1114FN28 use only.
Fork of mbed-src by
Information
この情報は2013/10/28時点での解決方法です。
現在はmbed-src、標準ライブラリで問題なくコンパイルが可能です。
・使う物
LPC1114FN28
mbed SDK
LPC1114FN28でmbed-SDKのLibraryを使うとCompile出来ない。(2013/10/28)
パスが通ってないだけのようなのでファイルを以下に移動する。
mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\ mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\ |
にあるファイルをすべて
mbed-src\targets\cmsis\TARGET_NXP\ |
へ移動
mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\にある
TOOLCHAIN_ARM_MICRO |
をフォルダごと
mbed-src\targets\cmsis\TARGET_NXP\ |
へ移動
mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\ mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\ |
にあるファイルをすべて
mbed-src\targets\hal\TARGET_NXP\ |
へ移動
移動後は以下のような構成になると思います。
※不要なファイルは削除してあります。
ファイルの移動が面倒なので以下に本家からフォークしたライブラリを置いておきます。
Import librarymbed-src-LPC1114FN28
Fork of mbed-src file paths change. LPC1114FN28 use only.
エラーが出力される場合
"TOOLCHAIN_ARM_MICRO"が無いとエラーになる。
Error: Undefined symbol _initial_sp (referred from entry2.o). Error: Undefined symbol _heap_base (referred from malloc.o). Error: Undefined symbol _heap_limit (referred from malloc.o). |
LPC1114FN28はMicrolibを使ってCompileされるため上記のエラーになるようです。
Diff: targets/cmsis/TARGET_NXP/TARGET_LPC11XX_11CXX/TOOLCHAIN_GCC_ARM/TARGET_LPC11CXX/LPC11C24.ld
- Revision:
- 43:b3acfef78949
- Parent:
- 42:7ca0bbba899b
--- a/targets/cmsis/TARGET_NXP/TARGET_LPC11XX_11CXX/TOOLCHAIN_GCC_ARM/TARGET_LPC11CXX/LPC11C24.ld Sun Oct 27 16:30:04 2013 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,149 +0,0 @@ -/* Linker script for mbed LPC1114 */ - -/* Linker script to configure memory regions. */ -MEMORY -{ - FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 32K - RAM (rwx) : ORIGIN = 0x100000C0, LENGTH = 0x1F40 -} - -/* Linker script to place sections and symbol values. Should be used together - * with other linker script that defines memory regions FLASH and RAM. - * It references following symbols, which must be defined in code: - * Reset_Handler : Entry of reset handler - * - * It defines following symbols, which code can use without definition: - * __exidx_start - * __exidx_end - * __etext - * __data_start__ - * __preinit_array_start - * __preinit_array_end - * __init_array_start - * __init_array_end - * __fini_array_start - * __fini_array_end - * __data_end__ - * __bss_start__ - * __bss_end__ - * __end__ - * end - * __HeapLimit - * __StackLimit - * __StackTop - * __stack - */ -ENTRY(Reset_Handler) - -SECTIONS -{ - .text : - { - KEEP(*(.isr_vector)) - *(.text.Reset_Handler) - *(.text.SystemInit) - . = 0x200; - *(.text*) - - KEEP(*(.init)) - KEEP(*(.fini)) - - /* .ctors */ - *crtbegin.o(.ctors) - *crtbegin?.o(.ctors) - *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) - *(SORT(.ctors.*)) - *(.ctors) - - /* .dtors */ - *crtbegin.o(.dtors) - *crtbegin?.o(.dtors) - *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) - *(SORT(.dtors.*)) - *(.dtors) - - *(.rodata*) - - KEEP(*(.eh_frame*)) - } > FLASH - - .ARM.extab : - { - *(.ARM.extab* .gnu.linkonce.armextab.*) - } > FLASH - - __exidx_start = .; - .ARM.exidx : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > FLASH - __exidx_end = .; - - __etext = .; - - .data : AT (__etext) - { - __data_start__ = .; - *(vtable) - *(.data*) - - . = ALIGN(4); - /* preinit data */ - PROVIDE (__preinit_array_start = .); - KEEP(*(.preinit_array)) - PROVIDE (__preinit_array_end = .); - - . = ALIGN(4); - /* init data */ - PROVIDE (__init_array_start = .); - KEEP(*(SORT(.init_array.*))) - KEEP(*(.init_array)) - PROVIDE (__init_array_end = .); - - - . = ALIGN(4); - /* finit data */ - PROVIDE (__fini_array_start = .); - KEEP(*(SORT(.fini_array.*))) - KEEP(*(.fini_array)) - PROVIDE (__fini_array_end = .); - - . = ALIGN(4); - /* All data end */ - __data_end__ = .; - - } > RAM - - .bss : - { - __bss_start__ = .; - *(.bss*) - *(COMMON) - __bss_end__ = .; - } > RAM - - .heap : - { - __end__ = .; - end = __end__; - *(.heap*) - __HeapLimit = .; - } > RAM - - /* .stack_dummy section doesn't contains any symbols. It is only - * used for linker to calculate size of stack sections, and assign - * values to stack symbols later */ - .stack_dummy : - { - *(.stack) - } > RAM - - /* Set stack top to end of RAM, and stack limit move down by - * size of stack_dummy section */ - __StackTop = ORIGIN(RAM) + LENGTH(RAM); - __StackLimit = __StackTop - SIZEOF(.stack_dummy); - PROVIDE(__stack = __StackTop); - - /* Check if data + heap + stack exceeds RAM limit */ - ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack") -}