Fork of mbed-src file paths change. LPC1114FN28 use only.
Fork of mbed-src by
Information
この情報は2013/10/28時点での解決方法です。
現在はmbed-src、標準ライブラリで問題なくコンパイルが可能です。
・使う物
LPC1114FN28
mbed SDK
LPC1114FN28でmbed-SDKのLibraryを使うとCompile出来ない。(2013/10/28)
パスが通ってないだけのようなのでファイルを以下に移動する。
mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\ mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\ |
にあるファイルをすべて
mbed-src\targets\cmsis\TARGET_NXP\ |
へ移動
mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\にある
TOOLCHAIN_ARM_MICRO |
をフォルダごと
mbed-src\targets\cmsis\TARGET_NXP\ |
へ移動
mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\ mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\ |
にあるファイルをすべて
mbed-src\targets\hal\TARGET_NXP\ |
へ移動
移動後は以下のような構成になると思います。
※不要なファイルは削除してあります。
ファイルの移動が面倒なので以下に本家からフォークしたライブラリを置いておきます。
Import librarymbed-src-LPC1114FN28
Fork of mbed-src file paths change. LPC1114FN28 use only.
エラーが出力される場合
"TOOLCHAIN_ARM_MICRO"が無いとエラーになる。
Error: Undefined symbol _initial_sp (referred from entry2.o). Error: Undefined symbol _heap_base (referred from malloc.o). Error: Undefined symbol _heap_limit (referred from malloc.o). |
LPC1114FN28はMicrolibを使ってCompileされるため上記のエラーになるようです。
Diff: targets/cmsis/TARGET_NXP/TARGET_LPC11UXX/TOOLCHAIN_GCC_ARM/startup_LPC11xx.s
- Revision:
- 43:b3acfef78949
- Parent:
- 42:7ca0bbba899b
--- a/targets/cmsis/TARGET_NXP/TARGET_LPC11UXX/TOOLCHAIN_GCC_ARM/startup_LPC11xx.s Sun Oct 27 16:30:04 2013 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,213 +0,0 @@ -/* File: startup_ARMCM0.S - * Purpose: startup file for Cortex-M0 devices. Should use with - * GCC for ARM Embedded Processors - * Version: V1.2 - * Date: 15 Nov 2011 - * - * Copyright (c) 2011, ARM Limited - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * Redistributions of source code must retain the above copyright - notice, this list of conditions and the following disclaimer. - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - * Neither the name of the ARM Limited nor the - names of its contributors may be used to endorse or promote products - derived from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ARM LIMITED BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - .syntax unified - .arch armv6-m - -/* Memory Model - The HEAP starts at the end of the DATA section and grows upward. - - The STACK starts at the end of the RAM and grows downward. - - The HEAP and stack STACK are only checked at compile time: - (DATA_SIZE + HEAP_SIZE + STACK_SIZE) < RAM_SIZE - - This is just a check for the bare minimum for the Heap+Stack area before - aborting compilation, it is not the run time limit: - Heap_Size + Stack_Size = 0x80 + 0x80 = 0x100 - */ - .section .stack - .align 3 -#ifdef __STACK_SIZE - .equ Stack_Size, __STACK_SIZE -#else - .equ Stack_Size, 0x80 -#endif - .globl __StackTop - .globl __StackLimit -__StackLimit: - .space Stack_Size - .size __StackLimit, . - __StackLimit -__StackTop: - .size __StackTop, . - __StackTop - - .section .heap - .align 3 -#ifdef __HEAP_SIZE - .equ Heap_Size, __HEAP_SIZE -#else - .equ Heap_Size, 0x80 -#endif - .globl __HeapBase - .globl __HeapLimit -__HeapBase: - .space Heap_Size - .size __HeapBase, . - __HeapBase -__HeapLimit: - .size __HeapLimit, . - __HeapLimit - - .section .isr_vector - .align 2 - .globl __isr_vector -__isr_vector: - .long __StackTop /* Top of Stack */ - .long Reset_Handler /* Reset Handler */ - .long NMI_Handler /* NMI Handler */ - .long HardFault_Handler /* Hard Fault Handler */ - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .long SVC_Handler /* SVCall Handler */ - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .long PendSV_Handler /* PendSV Handler */ - .long SysTick_Handler /* SysTick Handler */ - -/* LPC11xx interrupts */ - .long WAKEUP_IRQHandler /* 16 0 Wake-up on pin PIO0_0 */ - .long WAKEUP_IRQHandler /* 17 1 Wake-up on pin PIO0_1 */ - .long WAKEUP_IRQHandler /* 18 2 Wake-up on pin PIO0_2 */ - .long WAKEUP_IRQHandler /* 19 3 Wake-up on pin PIO0_3 */ - .long WAKEUP_IRQHandler /* 20 4 Wake-up on pin PIO0_4 */ - .long WAKEUP_IRQHandler /* 21 5 Wake-up on pin PIO0_5 */ - .long WAKEUP_IRQHandler /* 22 6 Wake-up on pin PIO0_6 */ - .long WAKEUP_IRQHandler /* 23 7 Wake-up on pin PIO0_7 */ - .long WAKEUP_IRQHandler /* 24 8 Wake-up on pin PIO0_8 */ - .long WAKEUP_IRQHandler /* 25 9 Wake-up on pin PIO0_9 */ - .long WAKEUP_IRQHandler /* 26 10 Wake-up on pin PIO0_10 */ - .long WAKEUP_IRQHandler /* 27 11 Wake-up on pin PIO0_11 */ - .long WAKEUP_IRQHandler /* 28 12 Wake-up on pin PIO1_0 */ - .long Default_Handler /* 29 13 */ - .long SSP1_IRQHandler /* 30 14 SSP1 */ - .long I2C_IRQHandler /* 31 15 I2C0 SI (state change) */ - .long TIMER16_0_IRQHandler /* 32 16 CT16B0 16 bit timer 0 */ - .long TIMER16_1_IRQHandler /* 33 17 CT16B1 16 bit timer 1 */ - .long TIMER32_0_IRQHandler /* 34 18 CT32B0 32 bit timer 0 */ - .long TIMER32_1_IRQHandler /* 35 19 CT32B1 32 bit timer 1 */ - .long SSP0_IRQHandler /* 36 20 SSP */ - .long UART_IRQHandler /* 37 21 UART */ - .long Default_Handler /* 38 22 */ - .long Default_Handler /* 39 23 */ - .long ADC_IRQHandler /* 40 24 ADC end of conversion */ - .long WDT_IRQHandler /* 41 25 Watchdog interrupt (WDINT) */ - .long BOD_IRQHandler /* 42 26 BOD Brown-out detect */ - .long Default_Handler /* 43 27 */ - .long PIOINT3_IRQHandler /* 44 28 PIO_3 GPIO interrupt status of port 3 */ - .long PIOINT2_IRQHandler /* 45 29 PIO_2 GPIO interrupt status of port 2 */ - .long PIOINT1_IRQHandler /* 46 30 PIO_1 GPIO interrupt status of port 1 */ - .long PIOINT0_IRQHandler /* 47 31 PIO_0 GPIO interrupt status of port 0 */ - - .size __isr_vector, . - __isr_vector - - .section .text.Reset_Handler - .thumb - .thumb_func - .align 2 - .globl Reset_Handler - .type Reset_Handler, %function -Reset_Handler: -/* Loop to copy data from read only memory to RAM. The ranges - * of copy from/to are specified by following symbols evaluated in - * linker script. - * __etext: End of code section, i.e., begin of data sections to copy from. - * __data_start__/__data_end__: RAM address range that data should be - * copied to. Both must be aligned to 4 bytes boundary. */ - - ldr r1, =__etext - ldr r2, =__data_start__ - ldr r3, =__data_end__ - - subs r3, r2 - ble .flash_to_ram_loop_end - - movs r4, 0 -.flash_to_ram_loop: - ldr r0, [r1,r4] - str r0, [r2,r4] - adds r4, 4 - cmp r4, r3 - blt .flash_to_ram_loop -.flash_to_ram_loop_end: - - ldr r0, =SystemInit - blx r0 - ldr r0, =_start - bx r0 - .pool - .size Reset_Handler, . - Reset_Handler - - .text -/* Macro to define default handlers. Default handler - * will be weak symbol and just dead loops. They can be - * overwritten by other handlers */ - .macro def_default_handler handler_name - .align 1 - .thumb_func - .weak \handler_name - .type \handler_name, %function -\handler_name : - b . - .size \handler_name, . - \handler_name - .endm - - def_default_handler NMI_Handler - def_default_handler HardFault_Handler - def_default_handler SVC_Handler - def_default_handler PendSV_Handler - def_default_handler SysTick_Handler - def_default_handler Default_Handler - - def_default_handler WAKEUP_IRQHandler - def_default_handler SSP1_IRQHandler - def_default_handler I2C_IRQHandler - def_default_handler TIMER16_0_IRQHandler - def_default_handler TIMER16_1_IRQHandler - def_default_handler TIMER32_0_IRQHandler - def_default_handler TIMER32_1_IRQHandler - def_default_handler SSP0_IRQHandler - def_default_handler UART_IRQHandler - def_default_handler ADC_IRQHandler - def_default_handler WDT_IRQHandler - def_default_handler BOD_IRQHandler - def_default_handler PIOINT3_IRQHandler - def_default_handler PIOINT2_IRQHandler - def_default_handler PIOINT1_IRQHandler - def_default_handler PIOINT0_IRQHandler - - .weak DEF_IRQHandler - .set DEF_IRQHandler, Default_Handler - - .end -