Fork of mbed-src file paths change. LPC1114FN28 use only.
Fork of mbed-src by
Information
この情報は2013/10/28時点での解決方法です。
現在はmbed-src、標準ライブラリで問題なくコンパイルが可能です。
・使う物
LPC1114FN28
mbed SDK
LPC1114FN28でmbed-SDKのLibraryを使うとCompile出来ない。(2013/10/28)
パスが通ってないだけのようなのでファイルを以下に移動する。
mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\ mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\ |
にあるファイルをすべて
mbed-src\targets\cmsis\TARGET_NXP\ |
へ移動
mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\にある
TOOLCHAIN_ARM_MICRO |
をフォルダごと
mbed-src\targets\cmsis\TARGET_NXP\ |
へ移動
mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\ mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\ |
にあるファイルをすべて
mbed-src\targets\hal\TARGET_NXP\ |
へ移動
移動後は以下のような構成になると思います。
※不要なファイルは削除してあります。
ファイルの移動が面倒なので以下に本家からフォークしたライブラリを置いておきます。
Import librarymbed-src-LPC1114FN28
Fork of mbed-src file paths change. LPC1114FN28 use only.
エラーが出力される場合
"TOOLCHAIN_ARM_MICRO"が無いとエラーになる。
Error: Undefined symbol _initial_sp (referred from entry2.o). Error: Undefined symbol _heap_base (referred from malloc.o). Error: Undefined symbol _heap_limit (referred from malloc.o). |
LPC1114FN28はMicrolibを使ってCompileされるため上記のエラーになるようです。
Diff: targets/cmsis/TARGET_Freescale/TARGET_KL46Z/TOOLCHAIN_GCC_ARM/startup_MKL46Z4.s
- Revision:
- 43:b3acfef78949
- Parent:
- 42:7ca0bbba899b
--- a/targets/cmsis/TARGET_Freescale/TARGET_KL46Z/TOOLCHAIN_GCC_ARM/startup_MKL46Z4.s Sun Oct 27 16:30:04 2013 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,240 +0,0 @@ -/* KL25Z startup ARM GCC - * Purpose: startup file for Cortex-M0 devices. Should use with - * GCC for ARM Embedded Processors - * Version: V1.2 - * Date: 15 Nov 2011 - * - * Copyright (c) 2011, ARM Limited - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * Redistributions of source code must retain the above copyright - notice, this list of conditions and the following disclaimer. - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - * Neither the name of the ARM Limited nor the - names of its contributors may be used to endorse or promote products - derived from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ARM LIMITED BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - .syntax unified - .arch armv6-m - -/* Memory Model - The HEAP starts at the end of the DATA section and grows upward. - - The STACK starts at the end of the RAM and grows downward. - - The HEAP and stack STACK are only checked at compile time: - (DATA_SIZE + HEAP_SIZE + STACK_SIZE) < RAM_SIZE - - This is just a check for the bare minimum for the Heap+Stack area before - aborting compilation, it is not the run time limit: - Heap_Size + Stack_Size = 0x80 + 0x80 = 0x100 - */ - .section .stack - .align 3 -#ifdef __STACK_SIZE - .equ Stack_Size, __STACK_SIZE -#else - .equ Stack_Size, 0x400 -#endif - .globl __StackTop - .globl __StackLimit -__StackLimit: - .space Stack_Size - .size __StackLimit, . - __StackLimit -__StackTop: - .size __StackTop, . - __StackTop - - .section .heap - .align 3 -#ifdef __HEAP_SIZE - .equ Heap_Size, __HEAP_SIZE -#else - .equ Heap_Size, 0x80 -#endif - .globl __HeapBase - .globl __HeapLimit -__HeapBase: - .space Heap_Size - .size __HeapBase, . - __HeapBase -__HeapLimit: - .size __HeapLimit, . - __HeapLimit - - .section .vector_table,"a",%progbits - .align 2 - .globl __isr_vector -__isr_vector: - .long __StackTop /* Top of Stack */ - .long Reset_Handler /* Reset Handler */ - .long NMI_Handler /* NMI Handler */ - .long HardFault_Handler /* Hard Fault Handler */ - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .long SVC_Handler /* SVCall Handler */ - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .long PendSV_Handler /* PendSV Handler */ - .long SysTick_Handler /* SysTick Handler */ - - /* External interrupts */ - .long DMA0_IRQHandler /* DMA channel 0 transfer complete interrupt */ - .long DMA1_IRQHandler /* DMA channel 1 transfer complete interrupt */ - .long DMA2_IRQHandler /* DMA channel 2 transfer complete interrupt */ - .long DMA3_IRQHandler /* DMA channel 3 transfer complete interrupt */ - .long Default_Handler /* Reserved interrupt 20 */ - .long FTFA_IRQHandler /* FTFA interrupt */ - .long LVD_LVW_IRQHandler /* Low Voltage Detect, Low Voltage Warning */ - .long LLW_IRQHandler /* Low Leakage Wakeup */ - .long I2C0_IRQHandler /* I2C0 interrupt */ - .long I2C1_IRQHandler /* I2C0 interrupt 25 */ - .long SPI0_IRQHandler /* SPI0 interrupt */ - .long SPI1_IRQHandler /* SPI1 interrupt */ - .long UART0_IRQHandler /* UART0 status/error interrupt */ - .long UART1_IRQHandler /* UART1 status/error interrupt */ - .long UART2_IRQHandler /* UART2 status/error interrupt */ - .long ADC0_IRQHandler /* ADC0 interrupt */ - .long CMP0_IRQHandler /* CMP0 interrupt */ - .long TPM0_IRQHandler /* TPM0 fault, overflow and channels interrupt */ - .long TPM1_IRQHandler /* TPM1 fault, overflow and channels interrupt */ - .long TPM2_IRQHandler /* TPM2 fault, overflow and channels interrupt */ - .long RTC_IRQHandler /* RTC interrupt */ - .long RTC_Seconds_IRQHandler /* RTC seconds interrupt */ - .long PIT_IRQHandler /* PIT timer interrupt */ - .long I2S_IRQHandler /* I2S transmit interrupt */ - .long USB0_IRQHandler /* USB0 interrupt */ - .long DAC0_IRQHandler /* DAC interrupt */ - .long TSI0_IRQHandler /* TSI0 interrupt */ - .long MCG_IRQHandler /* MCG interrupt */ - .long LPTimer_IRQHandler /* LPTimer interrupt */ - .long LCD_IRQHandler /* Segment LCD Interrupt*/ - .long PORTA_IRQHandler /* Port A interrupt */ - .long PORTD_IRQHandler /* Port D interrupt */ - - .size __isr_vector, . - __isr_vector - - .section .text.Reset_Handler - .thumb - .thumb_func - .align 2 - .globl Reset_Handler - .type Reset_Handler, %function -Reset_Handler: -/* Loop to copy data from read only memory to RAM. The ranges - * of copy from/to are specified by following symbols evaluated in - * linker script. - * __etext: End of code section, i.e., begin of data sections to copy from. - * __data_start__/__data_end__: RAM address range that data should be - * copied to. Both must be aligned to 4 bytes boundary. */ - - ldr r1, =__etext - ldr r2, =__data_start__ - ldr r3, =__data_end__ - - subs r3, r2 - ble .flash_to_ram_loop_end - - movs r4, 0 -.flash_to_ram_loop: - ldr r0, [r1,r4] - str r0, [r2,r4] - adds r4, 4 - cmp r4, r3 - blt .flash_to_ram_loop -.flash_to_ram_loop_end: - - ldr r0, =SystemInit - blx r0 - ldr r0, =_start - bx r0 - .pool - .size Reset_Handler, . - Reset_Handler - - .text -/* Macro to define default handlers. Default handler - * will be weak symbol and just dead loops. They can be - * overwritten by other handlers */ - .macro def_default_handler handler_name - .align 1 - .thumb_func - .weak \handler_name - .type \handler_name, %function -\handler_name : - b . - .size \handler_name, . - \handler_name - .endm - - def_default_handler NMI_Handler - def_default_handler HardFault_Handler - def_default_handler SVC_Handler - def_default_handler PendSV_Handler - def_default_handler SysTick_Handler - def_default_handler Default_Handler - - def_default_handler DMA0_IRQHandler - def_default_handler DMA1_IRQHandler - def_default_handler DMA2_IRQHandler - def_default_handler DMA3_IRQHandler - def_default_handler FTFA_IRQHandler - def_default_handler LVD_LVW_IRQHandler - def_default_handler LLW_IRQHandler - def_default_handler I2C0_IRQHandler - def_default_handler I2C1_IRQHandler - def_default_handler SPI0_IRQHandler - def_default_handler SPI1_IRQHandler - def_default_handler UART0_IRQHandler - def_default_handler UART1_IRQHandler - def_default_handler UART2_IRQHandler - def_default_handler ADC0_IRQHandler - def_default_handler CMP0_IRQHandler - def_default_handler TPM0_IRQHandler - def_default_handler TPM1_IRQHandler - def_default_handler TPM2_IRQHandler - def_default_handler RTC_IRQHandler - def_default_handler RTC_Seconds_IRQHandler - def_default_handler PIT_IRQHandler - def_default_handler I2S_IRQHandler - def_default_handler USB0_IRQHandler - def_default_handler DAC0_IRQHandler - def_default_handler TSI0_IRQHandler - def_default_handler MCG_IRQHandler - def_default_handler LPTimer_IRQHandler - def_default_handler LCD_IRQHandler - def_default_handler PORTA_IRQHandler - def_default_handler PORTD_IRQHandler - - - - .weak DEF_IRQHandler - .set DEF_IRQHandler, Default_Handler - -/* Flash protection region, placed at 0x400 */ - .text - .thumb - .align 2 - .section .kinetis_flash_config_field,"a",%progbits -kinetis_flash_config: - .long 0xffffffff - .long 0xffffffff - .long 0xffffffff - .long 0xfffffffe - - .end