Fork of mbed-src file paths change. LPC1114FN28 use only.
Fork of mbed-src by
Information
この情報は2013/10/28時点での解決方法です。
現在はmbed-src、標準ライブラリで問題なくコンパイルが可能です。
・使う物
LPC1114FN28
mbed SDK
LPC1114FN28でmbed-SDKのLibraryを使うとCompile出来ない。(2013/10/28)
パスが通ってないだけのようなのでファイルを以下に移動する。
mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\ mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\ |
にあるファイルをすべて
mbed-src\targets\cmsis\TARGET_NXP\ |
へ移動
mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\にある
TOOLCHAIN_ARM_MICRO |
をフォルダごと
mbed-src\targets\cmsis\TARGET_NXP\ |
へ移動
mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\ mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\ |
にあるファイルをすべて
mbed-src\targets\hal\TARGET_NXP\ |
へ移動
移動後は以下のような構成になると思います。
※不要なファイルは削除してあります。
![]() |
ファイルの移動が面倒なので以下に本家からフォークしたライブラリを置いておきます。
Import librarymbed-src-LPC1114FN28
Fork of mbed-src file paths change. LPC1114FN28 use only.
エラーが出力される場合
"TOOLCHAIN_ARM_MICRO"が無いとエラーになる。
Error: Undefined symbol _initial_sp (referred from entry2.o). Error: Undefined symbol _heap_base (referred from malloc.o). Error: Undefined symbol _heap_limit (referred from malloc.o). |
LPC1114FN28はMicrolibを使ってCompileされるため上記のエラーになるようです。
Diff: targets/hal/TARGET_STM/TARGET_STM32F4XX/PeripheralNames.h
- Revision:
- 20:4263a77256ae
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/hal/TARGET_STM/TARGET_STM32F4XX/PeripheralNames.h Tue Sep 10 15:14:19 2013 +0300 @@ -0,0 +1,88 @@ +/* mbed Microcontroller Library + * Copyright (c) 2006-2013 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#ifndef MBED_PERIPHERALNAMES_H +#define MBED_PERIPHERALNAMES_H + +#include "cmsis.h" + +#ifdef __cplusplus +extern "C" { +#endif + +typedef enum { + UART_1 = (int)USART1_BASE, + UART_2 = (int)USART2_BASE, + UART_3 = (int)USART3_BASE, + UART_4 = (int)UART4_BASE, + UART_5 = (int)UART5_BASE, + UART_6 = (int)USART6_BASE +} UARTName; + +typedef enum { + ADC0_0 = 0, + ADC0_1, + ADC0_2, + ADC0_3, + ADC0_4, + ADC0_5, + ADC0_6, + ADC0_7, + ADC0_8, + ADC0_9, + ADC0_10, + ADC0_11, + ADC0_12, + ADC0_13, + ADC0_14, + ADC0_15 +} ADCName; + +typedef enum { + DAC_0 = 0, + DAC_1 +} DACName; + +typedef enum { + SPI_1 = (int)SPI1_BASE, + SPI_2 = (int)SPI2_BASE, + SPI_3 = (int)SPI3_BASE, +} SPIName; + +typedef enum { + I2C_1 = (int)I2C1_BASE, + I2C_2 = (int)I2C2_BASE, + I2C_3 = (int)I2C3_BASE +} I2CName; + +typedef enum { + PWM_1 = 1, + PWM_2, + PWM_3, + PWM_4, + PWM_5, + PWM_6 +} PWMName; + +typedef enum { + CAN_1 = (int)CAN1_BASE, + CAN_2 = (int)CAN2_BASE +} CANName; + +#ifdef __cplusplus +} +#endif + +#endif