minicube.net .
Fork of mbed-src file paths change. LPC1114FN28 use only.
Fork of
mbed-src
by 
mbed official
Information
この情報は2013/10/28時点での解決方法です。
現在はmbed-src、標準ライブラリで問題なくコンパイルが可能です。
・使う物
LPC1114FN28
mbed SDK
LPC1114FN28でmbed-SDKのLibraryを使うとCompile出来ない。（2013/10/28）
パスが通ってないだけのようなのでファイルを以下に移動する。
| mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\ mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\ |
にあるファイルをすべて
| mbed-src\targets\cmsis\TARGET_NXP\ |
へ移動
mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\にある
| TOOLCHAIN_ARM_MICRO |
をフォルダごと
| mbed-src\targets\cmsis\TARGET_NXP\ |
へ移動
| mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\ mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\ |
にあるファイルをすべて
| mbed-src\targets\hal\TARGET_NXP\ |
へ移動
移動後は以下のような構成になると思います。
※不要なファイルは削除してあります。
 |
ファイルの移動が面倒なので以下に本家からフォークしたライブラリを置いておきます。
Import librarymbed-src-LPC1114FN28
Fork of mbed-src file paths change. LPC1114FN28 use only.
Last commit 27 Oct 2013 by 
minicube.net .
エラーが出力される場合
"TOOLCHAIN_ARM_MICRO"が無いとエラーになる。
| Error: Undefined symbol _initial_sp (referred from entry2.o). Error: Undefined symbol _heap_base (referred from malloc.o). Error: Undefined symbol _heap_limit (referred from malloc.o). |
LPC1114FN28はMicrolibを使ってCompileされるため上記のエラーになるようです。
Diff: targets/cmsis/TARGET_NXP/TARGET_LPC13XX/TOOLCHAIN_ARM_STD/startup_LPC13xx.s
- Revision:
- 13:0645d8841f51
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/cmsis/TARGET_NXP/TARGET_LPC13XX/TOOLCHAIN_ARM_STD/startup_LPC13xx.s Mon Aug 05 14:12:34 2013 +0300 @@ -0,0 +1,215 @@ +;/***************************************************************************** +; * @file: startup_LPC13xx.s +; * @purpose: CMSIS Cortex-M3 Core Device Startup File +; * for the NXP LPC13xx Device Series +; * @version: V1.02, modified for mbed +; * @date: 27. July 2009, modified 3rd Aug 2009 +; *------- <<< Use Configuration Wizard in Context Menu >>> ------------------ +; * +; * Copyright (C) 2009 ARM Limited. All rights reserved. +; * ARM Limited (ARM) is supplying this software for use with Cortex-M3 +; * processor based microcontrollers. This file can be freely distributed +; * within development tools that are supporting such ARM based processors. +; * +; * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED +; * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF +; * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. +; * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR +; * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. +; * +; *****************************************************************************/ + +__initial_sp EQU 0x10002000 ; Top of RAM from LPC1347 + + PRESERVE8 + THUMB + +; Vector Table Mapped to Address 0 at Reset + + AREA RESET, DATA, READONLY + EXPORT __Vectors + +__Vectors DCD __initial_sp ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + + DCD PIN_INT0_Handler ; All GPIO pin can be routed to PIN_INTx + DCD PIN_INT1_Handler + DCD PIN_INT2_Handler + DCD PIN_INT3_Handler + DCD PIN_INT4_Handler + DCD PIN_INT5_Handler + DCD PIN_INT6_Handler + DCD PIN_INT7_Handler + DCD GINT0_Handler + DCD GINT1_Handler ; PIO0 (0:7) + DCD 0 + DCD 0 + DCD OSTIMER_Handler + DCD 0 + DCD SSP1_Handler ; SSP1 + DCD I2C_Handler ; I2C + DCD CT16B0_Handler ; 16-bit Timer0 + DCD CT16B1_Handler ; 16-bit Timer1 + DCD CT32B0_Handler ; 32-bit Timer0 + DCD CT32B1_Handler ; 32-bit Timer1 + DCD SSP0_Handler ; SSP0 + DCD USART_Handler ; USART + DCD USB_Handler ; USB IRQ + DCD USB_FIQHandler ; USB FIQ + DCD ADC_Handler ; A/D Converter + DCD WDT_Handler ; Watchdog timer + DCD BOD_Handler ; Brown Out Detect + DCD FMC_Handler ; IP2111 Flash Memory Controller + DCD OSCFAIL_Handler ; OSC FAIL + DCD PVTCIRCUIT_Handler ; PVT CIRCUIT + DCD USBWakeup_Handler ; USB wake up + DCD 0 + + IF :LNOT::DEF:NO_CRP + AREA |.ARM.__at_0x02FC|, CODE, READONLY +CRP_Key DCD 0xFFFFFFFF + ENDIF + + + AREA |.text|, CODE, READONLY + + +; Reset Handler + +Reset_Handler PROC + EXPORT Reset_Handler [WEAK] + IMPORT SystemInit + IMPORT __main + LDR R0, =SystemInit + BLX R0 + LDR R0, =__main + BX R0 + ENDP + + +; Dummy Exception Handlers (infinite loops which can be modified) + +NMI_Handler PROC + EXPORT NMI_Handler [WEAK] + B . + ENDP +HardFault_Handler\ + PROC + EXPORT HardFault_Handler [WEAK] + B . + ENDP +MemManage_Handler\ + PROC + EXPORT MemManage_Handler [WEAK] + B . + ENDP +BusFault_Handler\ + PROC + EXPORT BusFault_Handler [WEAK] + B . + ENDP +UsageFault_Handler\ + PROC + EXPORT UsageFault_Handler [WEAK] + B . + ENDP +SVC_Handler PROC + EXPORT SVC_Handler [WEAK] + B . + ENDP +DebugMon_Handler\ + PROC + EXPORT DebugMon_Handler [WEAK] + B . + ENDP +PendSV_Handler PROC + EXPORT PendSV_Handler [WEAK] + B . + ENDP +SysTick_Handler PROC + EXPORT SysTick_Handler [WEAK] + B . + ENDP + +Default_Handler PROC + + EXPORT PIN_INT0_Handler [WEAK] + EXPORT PIN_INT1_Handler [WEAK] + EXPORT PIN_INT2_Handler [WEAK] + EXPORT PIN_INT3_Handler [WEAK] + EXPORT PIN_INT4_Handler [WEAK] + EXPORT PIN_INT5_Handler [WEAK] + EXPORT PIN_INT6_Handler [WEAK] + EXPORT PIN_INT7_Handler [WEAK] + EXPORT GINT0_Handler [WEAK] + EXPORT GINT1_Handler [WEAK] + EXPORT OSTIMER_Handler [WEAK] + EXPORT SSP1_Handler [WEAK] + EXPORT I2C_Handler [WEAK] + EXPORT CT16B0_Handler [WEAK] + EXPORT CT16B1_Handler [WEAK] + EXPORT CT32B0_Handler [WEAK] + EXPORT CT32B1_Handler [WEAK] + EXPORT SSP0_Handler [WEAK] + EXPORT USART_Handler [WEAK] + EXPORT USB_Handler [WEAK] + EXPORT USB_FIQHandler [WEAK] + EXPORT ADC_Handler [WEAK] + EXPORT WDT_Handler [WEAK] + EXPORT BOD_Handler [WEAK] + EXPORT FMC_Handler [WEAK] + EXPORT OSCFAIL_Handler [WEAK] + EXPORT PVTCIRCUIT_Handler [WEAK] + EXPORT USBWakeup_Handler [WEAK] + +PIN_INT0_Handler +PIN_INT1_Handler +PIN_INT2_Handler +PIN_INT3_Handler +PIN_INT4_Handler +PIN_INT5_Handler +PIN_INT6_Handler +PIN_INT7_Handler +GINT0_Handler +GINT1_Handler +OSTIMER_Handler +SSP1_Handler +I2C_Handler +CT16B0_Handler +CT16B1_Handler +CT32B0_Handler +CT32B1_Handler +SSP0_Handler +USART_Handler +USB_Handler +USB_FIQHandler +ADC_Handler +WDT_Handler +BOD_Handler +FMC_Handler +OSCFAIL_Handler +PVTCIRCUIT_Handler +USBWakeup_Handler + + B . + + ENDP + + ALIGN + END