Fork of mbed-src file paths change. LPC1114FN28 use only.
Fork of mbed-src by
Information
この情報は2013/10/28時点での解決方法です。
現在はmbed-src、標準ライブラリで問題なくコンパイルが可能です。
・使う物
LPC1114FN28
mbed SDK
LPC1114FN28でmbed-SDKのLibraryを使うとCompile出来ない。(2013/10/28)
パスが通ってないだけのようなのでファイルを以下に移動する。
mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\ mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\ |
にあるファイルをすべて
mbed-src\targets\cmsis\TARGET_NXP\ |
へ移動
mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\にある
TOOLCHAIN_ARM_MICRO |
をフォルダごと
mbed-src\targets\cmsis\TARGET_NXP\ |
へ移動
mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\ mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\ |
にあるファイルをすべて
mbed-src\targets\hal\TARGET_NXP\ |
へ移動
移動後は以下のような構成になると思います。
※不要なファイルは削除してあります。
![]() |
ファイルの移動が面倒なので以下に本家からフォークしたライブラリを置いておきます。
Import librarymbed-src-LPC1114FN28
Fork of mbed-src file paths change. LPC1114FN28 use only.
エラーが出力される場合
"TOOLCHAIN_ARM_MICRO"が無いとエラーになる。
Error: Undefined symbol _initial_sp (referred from entry2.o). Error: Undefined symbol _heap_base (referred from malloc.o). Error: Undefined symbol _heap_limit (referred from malloc.o). |
LPC1114FN28はMicrolibを使ってCompileされるため上記のエラーになるようです。
targets/hal/TARGET_Freescale/TARGET_KL46Z/rtc_api.c@31:42176bc3c368, 2013-09-25 (annotated)
- Committer:
- mbed_official
- Date:
- Wed Sep 25 11:30:05 2013 +0100
- Revision:
- 31:42176bc3c368
- Child:
- 33:e214068ab66c
Synchronized with git revision f580c008b139a952d38ac5c7c53bbae375739c67
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
mbed_official | 31:42176bc3c368 | 1 | /* mbed Microcontroller Library |
mbed_official | 31:42176bc3c368 | 2 | * Copyright (c) 2006-2013 ARM Limited |
mbed_official | 31:42176bc3c368 | 3 | * |
mbed_official | 31:42176bc3c368 | 4 | * Licensed under the Apache License, Version 2.0 (the "License"); |
mbed_official | 31:42176bc3c368 | 5 | * you may not use this file except in compliance with the License. |
mbed_official | 31:42176bc3c368 | 6 | * You may obtain a copy of the License at |
mbed_official | 31:42176bc3c368 | 7 | * |
mbed_official | 31:42176bc3c368 | 8 | * http://www.apache.org/licenses/LICENSE-2.0 |
mbed_official | 31:42176bc3c368 | 9 | * |
mbed_official | 31:42176bc3c368 | 10 | * Unless required by applicable law or agreed to in writing, software |
mbed_official | 31:42176bc3c368 | 11 | * distributed under the License is distributed on an "AS IS" BASIS, |
mbed_official | 31:42176bc3c368 | 12 | * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
mbed_official | 31:42176bc3c368 | 13 | * See the License for the specific language governing permissions and |
mbed_official | 31:42176bc3c368 | 14 | * limitations under the License. |
mbed_official | 31:42176bc3c368 | 15 | */ |
mbed_official | 31:42176bc3c368 | 16 | #include "rtc_api.h" |
mbed_official | 31:42176bc3c368 | 17 | |
mbed_official | 31:42176bc3c368 | 18 | static void init(void) { |
mbed_official | 31:42176bc3c368 | 19 | // enable PORTC clock |
mbed_official | 31:42176bc3c368 | 20 | SIM->SCGC5 |= SIM_SCGC5_PORTC_MASK; |
mbed_official | 31:42176bc3c368 | 21 | |
mbed_official | 31:42176bc3c368 | 22 | // enable RTC clock |
mbed_official | 31:42176bc3c368 | 23 | SIM->SCGC6 |= SIM_SCGC6_RTC_MASK; |
mbed_official | 31:42176bc3c368 | 24 | |
mbed_official | 31:42176bc3c368 | 25 | /* |
mbed_official | 31:42176bc3c368 | 26 | * configure PTC1 with alternate function 1: RTC_CLKIN |
mbed_official | 31:42176bc3c368 | 27 | * As the kl25z board does not have a 32kHz osc, |
mbed_official | 31:42176bc3c368 | 28 | * we use an external clock generated by the |
mbed_official | 31:42176bc3c368 | 29 | * interface chip |
mbed_official | 31:42176bc3c368 | 30 | */ |
mbed_official | 31:42176bc3c368 | 31 | PORTC->PCR[1] &= ~PORT_PCR_MUX_MASK; |
mbed_official | 31:42176bc3c368 | 32 | PORTC->PCR[1] = PORT_PCR_MUX(1); |
mbed_official | 31:42176bc3c368 | 33 | |
mbed_official | 31:42176bc3c368 | 34 | // select RTC_CLKIN as RTC clock source |
mbed_official | 31:42176bc3c368 | 35 | SIM->SOPT1 &= ~SIM_SOPT1_OSC32KSEL_MASK; |
mbed_official | 31:42176bc3c368 | 36 | SIM->SOPT1 |= SIM_SOPT1_OSC32KSEL(2); |
mbed_official | 31:42176bc3c368 | 37 | } |
mbed_official | 31:42176bc3c368 | 38 | |
mbed_official | 31:42176bc3c368 | 39 | void rtc_init(void) { |
mbed_official | 31:42176bc3c368 | 40 | init(); |
mbed_official | 31:42176bc3c368 | 41 | |
mbed_official | 31:42176bc3c368 | 42 | //Configure the TSR. default value: 1 |
mbed_official | 31:42176bc3c368 | 43 | RTC->TSR = 1; |
mbed_official | 31:42176bc3c368 | 44 | |
mbed_official | 31:42176bc3c368 | 45 | // enable counter |
mbed_official | 31:42176bc3c368 | 46 | RTC->SR |= RTC_SR_TCE_MASK; |
mbed_official | 31:42176bc3c368 | 47 | } |
mbed_official | 31:42176bc3c368 | 48 | |
mbed_official | 31:42176bc3c368 | 49 | void rtc_free(void) { |
mbed_official | 31:42176bc3c368 | 50 | // [TODO] |
mbed_official | 31:42176bc3c368 | 51 | } |
mbed_official | 31:42176bc3c368 | 52 | |
mbed_official | 31:42176bc3c368 | 53 | /* |
mbed_official | 31:42176bc3c368 | 54 | * Little check routine to see if the RTC has been enabled |
mbed_official | 31:42176bc3c368 | 55 | * 0 = Disabled, 1 = Enabled |
mbed_official | 31:42176bc3c368 | 56 | */ |
mbed_official | 31:42176bc3c368 | 57 | int rtc_isenabled(void) { |
mbed_official | 31:42176bc3c368 | 58 | // even if the RTC module is enabled, |
mbed_official | 31:42176bc3c368 | 59 | // as we use RTC_CLKIN and an external clock, |
mbed_official | 31:42176bc3c368 | 60 | // we need to reconfigure the pins. That is why we |
mbed_official | 31:42176bc3c368 | 61 | // call init() if the rtc is enabled |
mbed_official | 31:42176bc3c368 | 62 | |
mbed_official | 31:42176bc3c368 | 63 | // if RTC not enabled return 0 |
mbed_official | 31:42176bc3c368 | 64 | SIM->SCGC5 |= SIM_SCGC5_PORTC_MASK; |
mbed_official | 31:42176bc3c368 | 65 | SIM->SCGC6 |= SIM_SCGC6_RTC_MASK; |
mbed_official | 31:42176bc3c368 | 66 | if ((RTC->SR & RTC_SR_TCE_MASK) == 0) |
mbed_official | 31:42176bc3c368 | 67 | return 0; |
mbed_official | 31:42176bc3c368 | 68 | |
mbed_official | 31:42176bc3c368 | 69 | init(); |
mbed_official | 31:42176bc3c368 | 70 | return 1; |
mbed_official | 31:42176bc3c368 | 71 | } |
mbed_official | 31:42176bc3c368 | 72 | |
mbed_official | 31:42176bc3c368 | 73 | time_t rtc_read(void) { |
mbed_official | 31:42176bc3c368 | 74 | return RTC->TSR; |
mbed_official | 31:42176bc3c368 | 75 | } |
mbed_official | 31:42176bc3c368 | 76 | |
mbed_official | 31:42176bc3c368 | 77 | void rtc_write(time_t t) { |
mbed_official | 31:42176bc3c368 | 78 | // disable counter |
mbed_official | 31:42176bc3c368 | 79 | RTC->SR &= ~RTC_SR_TCE_MASK; |
mbed_official | 31:42176bc3c368 | 80 | |
mbed_official | 31:42176bc3c368 | 81 | // we do not write 0 into TSR |
mbed_official | 31:42176bc3c368 | 82 | // to avoid invalid time |
mbed_official | 31:42176bc3c368 | 83 | if (t == 0) |
mbed_official | 31:42176bc3c368 | 84 | t = 1; |
mbed_official | 31:42176bc3c368 | 85 | |
mbed_official | 31:42176bc3c368 | 86 | // write seconds |
mbed_official | 31:42176bc3c368 | 87 | RTC->TSR = t; |
mbed_official | 31:42176bc3c368 | 88 | |
mbed_official | 31:42176bc3c368 | 89 | // re-enable counter |
mbed_official | 31:42176bc3c368 | 90 | RTC->SR |= RTC_SR_TCE_MASK; |
mbed_official | 31:42176bc3c368 | 91 | } |