minicube.net . / mbed-src-LPC1114FN28

Fork of mbed-src file paths change. LPC1114FN28 use only.

Fork of mbed-src by mbed official

Information

この情報は2013/10/28時点での解決方法です。
現在はmbed-src、標準ライブラリで問題なくコンパイルが可能です。

・使う物
LPC1114FN28
mbed SDK

LPC1114FN28でmbed-SDKのLibraryを使うとCompile出来ない。（2013/10/28） /media/uploads/minicube/mbed_lpc1114_sdk.png

パスが通ってないだけのようなのでファイルを以下に移動する。

mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\
mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\

にあるファイルをすべて

mbed-src\targets\cmsis\TARGET_NXP\

へ移動

mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\にある

TOOLCHAIN_ARM_MICRO

をフォルダごと

mbed-src\targets\cmsis\TARGET_NXP\

へ移動

mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\
mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\

にあるファイルをすべて

mbed-src\targets\hal\TARGET_NXP\

へ移動

移動後は以下のような構成になると思います。
※不要なファイルは削除してあります。

/media/uploads/minicube/mbed_lpc1114_sdk_tree.png


ファイルの移動が面倒なので以下に本家からフォークしたライブラリを置いておきます。

Import librarymbed-src-LPC1114FN28

Fork of mbed-src file paths change. LPC1114FN28 use only.

Last commit 27 Oct 2013 by minicube.net .


エラーが出力される場合

"TOOLCHAIN_ARM_MICRO"が無いとエラーになる。

Error: Undefined symbol _initial_sp (referred from entry2.o).
Error: Undefined symbol _heap_base (referred from malloc.o).
Error: Undefined symbol _heap_limit (referred from malloc.o).

LPC1114FN28はMicrolibを使ってCompileされるため上記のエラーになるようです。

targets/hal/TARGET_NXP/TARGET_LPC11UXX/analogin_api.c@19:398f4c622e1b, 2013-08-19 (annotated)

Committer:
bogdanm
Date:
Mon Aug 19 18:17:02 2013 +0300
Revision:
19:398f4c622e1b
Parent:
13:0645d8841f51 
Sync with official mbed library release 66

Who changed what in which revision?

UserRevisionLine numberNew contents of line
emilmont 10:3bc89ef62ce7 1 /* mbed Microcontroller Library
emilmont 10:3bc89ef62ce7 2 * Copyright (c) 2006-2013 ARM Limited
emilmont 10:3bc89ef62ce7 3 *
emilmont 10:3bc89ef62ce7 4 * Licensed under the Apache License, Version 2.0 (the "License");
emilmont 10:3bc89ef62ce7 5 * you may not use this file except in compliance with the License.
emilmont 10:3bc89ef62ce7 6 * You may obtain a copy of the License at
emilmont 10:3bc89ef62ce7 7 *
emilmont 10:3bc89ef62ce7 8 * http://www.apache.org/licenses/LICENSE-2.0
emilmont 10:3bc89ef62ce7 9 *
emilmont 10:3bc89ef62ce7 10 * Unless required by applicable law or agreed to in writing, software
emilmont 10:3bc89ef62ce7 11 * distributed under the License is distributed on an "AS IS" BASIS,
emilmont 10:3bc89ef62ce7 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
emilmont 10:3bc89ef62ce7 13 * See the License for the specific language governing permissions and
emilmont 10:3bc89ef62ce7 14 * limitations under the License.
emilmont 10:3bc89ef62ce7 15 */
emilmont 10:3bc89ef62ce7 16 #include "analogin_api.h"
emilmont 10:3bc89ef62ce7 17 #include "cmsis.h"
emilmont 10:3bc89ef62ce7 18 #include "pinmap.h"
emilmont 10:3bc89ef62ce7 19 #include "error.h"
emilmont 10:3bc89ef62ce7 20
emilmont 10:3bc89ef62ce7 21 #define ANALOGIN_MEDIAN_FILTER 1
emilmont 10:3bc89ef62ce7 22
emilmont 10:3bc89ef62ce7 23 #define ADC_10BIT_RANGE 0x3FF
emilmont 10:3bc89ef62ce7 24 #define ADC_12BIT_RANGE 0xFFF
emilmont 10:3bc89ef62ce7 25
emilmont 10:3bc89ef62ce7 26 static inline int div_round_up(int x, int y) {
emilmont 10:3bc89ef62ce7 27 return (x + (y - 1)) / y;
emilmont 10:3bc89ef62ce7 28 }
emilmont 10:3bc89ef62ce7 29
emilmont 10:3bc89ef62ce7 30 static const PinMap PinMap_ADC[] = {
emilmont 10:3bc89ef62ce7 31 {P0_11, ADC0_0, 0x02},
emilmont 10:3bc89ef62ce7 32 {P0_12, ADC0_1, 0x02},
emilmont 10:3bc89ef62ce7 33 {P0_13, ADC0_2, 0x02},
emilmont 10:3bc89ef62ce7 34 {P0_14, ADC0_3, 0x02},
emilmont 10:3bc89ef62ce7 35 {P0_15, ADC0_4, 0x02},
emilmont 10:3bc89ef62ce7 36 {P0_16, ADC0_5, 0x01},
emilmont 10:3bc89ef62ce7 37 {P0_22, ADC0_6, 0x01},
emilmont 10:3bc89ef62ce7 38 {P0_23, ADC0_7, 0x01},
emilmont 10:3bc89ef62ce7 39 {NC , NC , 0 }
emilmont 10:3bc89ef62ce7 40 };
emilmont 10:3bc89ef62ce7 41
emilmont 10:3bc89ef62ce7 42 #define LPC_IOCON0_BASE (LPC_IOCON_BASE)
emilmont 10:3bc89ef62ce7 43 #define LPC_IOCON1_BASE (LPC_IOCON_BASE + 0x60)
emilmont 10:3bc89ef62ce7 44
emilmont 10:3bc89ef62ce7 45 #define ADC_RANGE ADC_10BIT_RANGE
emilmont 10:3bc89ef62ce7 46
emilmont 10:3bc89ef62ce7 47 void analogin_init(analogin_t *obj, PinName pin) {
emilmont 10:3bc89ef62ce7 48 obj->adc = (ADCName)pinmap_peripheral(pin, PinMap_ADC);
bogdanm 19:398f4c622e1b 49 if (obj->adc == (ADCName)NC) {
emilmont 10:3bc89ef62ce7 50 error("ADC pin mapping failed");
emilmont 10:3bc89ef62ce7 51 }
emilmont 10:3bc89ef62ce7 52
emilmont 10:3bc89ef62ce7 53 // Power up ADC
emilmont 10:3bc89ef62ce7 54 LPC_SYSCON->PDRUNCFG &= ~ (1 << 4);
emilmont 10:3bc89ef62ce7 55 LPC_SYSCON->SYSAHBCLKCTRL |= ((uint32_t)1 << 13);
emilmont 10:3bc89ef62ce7 56
emilmont 10:3bc89ef62ce7 57 uint32_t pin_number = (uint32_t)pin;
emilmont 10:3bc89ef62ce7 58 __IO uint32_t *reg = (pin_number < 32) ? (__IO uint32_t*)(LPC_IOCON0_BASE + 4 * pin_number) : (__IO uint32_t*)(LPC_IOCON1_BASE + 4 * (pin_number - 32));
emilmont 10:3bc89ef62ce7 59
emilmont 10:3bc89ef62ce7 60 // set pin to ADC mode
emilmont 10:3bc89ef62ce7 61 *reg &= ~(1 << 7); // set ADMODE = 0 (analog mode)
emilmont 10:3bc89ef62ce7 62
emilmont 10:3bc89ef62ce7 63 uint32_t PCLK = SystemCoreClock;
emilmont 10:3bc89ef62ce7 64 uint32_t MAX_ADC_CLK = 4500000;
emilmont 10:3bc89ef62ce7 65 uint32_t clkdiv = div_round_up(PCLK, MAX_ADC_CLK) - 1;
emilmont 10:3bc89ef62ce7 66
emilmont 10:3bc89ef62ce7 67 LPC_ADC->CR = (0 << 0) // no channels selected
emilmont 10:3bc89ef62ce7 68 | (clkdiv << 8) // max of 4.5MHz
emilmont 10:3bc89ef62ce7 69 | (0 << 16) // BURST = 0, software controlled
emilmont 10:3bc89ef62ce7 70 | ( 0 << 17 ); // CLKS = 0, not applicable
emilmont 10:3bc89ef62ce7 71
emilmont 10:3bc89ef62ce7 72 pinmap_pinout(pin, PinMap_ADC);
emilmont 10:3bc89ef62ce7 73 }
emilmont 10:3bc89ef62ce7 74
emilmont 10:3bc89ef62ce7 75 static inline uint32_t adc_read(analogin_t *obj) {
emilmont 10:3bc89ef62ce7 76 // Select the appropriate channel and start conversion
emilmont 10:3bc89ef62ce7 77 LPC_ADC->CR &= ~0xFF;
emilmont 10:3bc89ef62ce7 78 LPC_ADC->CR |= 1 << (int)obj->adc;
emilmont 10:3bc89ef62ce7 79 LPC_ADC->CR |= 1 << 24;
emilmont 10:3bc89ef62ce7 80
emilmont 10:3bc89ef62ce7 81 // Repeatedly get the sample data until DONE bit
emilmont 10:3bc89ef62ce7 82 unsigned int data;
emilmont 10:3bc89ef62ce7 83 do {
emilmont 10:3bc89ef62ce7 84 data = LPC_ADC->GDR;
emilmont 10:3bc89ef62ce7 85 } while ((data & ((unsigned int)1 << 31)) == 0);
emilmont 10:3bc89ef62ce7 86
emilmont 10:3bc89ef62ce7 87 // Stop conversion
emilmont 10:3bc89ef62ce7 88 LPC_ADC->CR &= ~(1 << 24);
emilmont 10:3bc89ef62ce7 89
emilmont 10:3bc89ef62ce7 90 return (data >> 6) & ADC_RANGE; // 10 bit
emilmont 10:3bc89ef62ce7 91 }
emilmont 10:3bc89ef62ce7 92
emilmont 10:3bc89ef62ce7 93 static inline void order(uint32_t *a, uint32_t *b) {
emilmont 10:3bc89ef62ce7 94 if (*a > *b) {
emilmont 10:3bc89ef62ce7 95 uint32_t t = *a;
emilmont 10:3bc89ef62ce7 96 *a = *b;
emilmont 10:3bc89ef62ce7 97 *b = t;
emilmont 10:3bc89ef62ce7 98 }
emilmont 10:3bc89ef62ce7 99 }
emilmont 10:3bc89ef62ce7 100
emilmont 10:3bc89ef62ce7 101 static inline uint32_t adc_read_u32(analogin_t *obj) {
emilmont 10:3bc89ef62ce7 102 uint32_t value;
emilmont 10:3bc89ef62ce7 103 #if ANALOGIN_MEDIAN_FILTER
emilmont 10:3bc89ef62ce7 104 uint32_t v1 = adc_read(obj);
emilmont 10:3bc89ef62ce7 105 uint32_t v2 = adc_read(obj);
emilmont 10:3bc89ef62ce7 106 uint32_t v3 = adc_read(obj);
emilmont 10:3bc89ef62ce7 107 order(&v1, &v2);
emilmont 10:3bc89ef62ce7 108 order(&v2, &v3);
emilmont 10:3bc89ef62ce7 109 order(&v1, &v2);
emilmont 10:3bc89ef62ce7 110 value = v2;
emilmont 10:3bc89ef62ce7 111 #else
emilmont 10:3bc89ef62ce7 112 value = adc_read(obj);
emilmont 10:3bc89ef62ce7 113 #endif
emilmont 10:3bc89ef62ce7 114 return value;
emilmont 10:3bc89ef62ce7 115 }
emilmont 10:3bc89ef62ce7 116
emilmont 10:3bc89ef62ce7 117 uint16_t analogin_read_u16(analogin_t *obj) {
emilmont 10:3bc89ef62ce7 118 uint32_t value = adc_read_u32(obj);
emilmont 10:3bc89ef62ce7 119
emilmont 10:3bc89ef62ce7 120 return (value << 6) | ((value >> 4) & 0x003F); // 10 bit
emilmont 10:3bc89ef62ce7 121 }
emilmont 10:3bc89ef62ce7 122
emilmont 10:3bc89ef62ce7 123 float analogin_read(analogin_t *obj) {
emilmont 10:3bc89ef62ce7 124 uint32_t value = adc_read_u32(obj);
emilmont 10:3bc89ef62ce7 125 return (float)value * (1.0f / (float)ADC_RANGE);
emilmont 10:3bc89ef62ce7 126 }