Fork of mbed-src file paths change. LPC1114FN28 use only.
Fork of mbed-src by
Information
この情報は2013/10/28時点での解決方法です。
現在はmbed-src、標準ライブラリで問題なくコンパイルが可能です。
・使う物
LPC1114FN28
mbed SDK
LPC1114FN28でmbed-SDKのLibraryを使うとCompile出来ない。(2013/10/28)
パスが通ってないだけのようなのでファイルを以下に移動する。
mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\ mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\ |
にあるファイルをすべて
mbed-src\targets\cmsis\TARGET_NXP\ |
へ移動
mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\にある
TOOLCHAIN_ARM_MICRO |
をフォルダごと
mbed-src\targets\cmsis\TARGET_NXP\ |
へ移動
mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\ mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\ |
にあるファイルをすべて
mbed-src\targets\hal\TARGET_NXP\ |
へ移動
移動後は以下のような構成になると思います。
※不要なファイルは削除してあります。
ファイルの移動が面倒なので以下に本家からフォークしたライブラリを置いておきます。
Import librarymbed-src-LPC1114FN28
Fork of mbed-src file paths change. LPC1114FN28 use only.
エラーが出力される場合
"TOOLCHAIN_ARM_MICRO"が無いとエラーになる。
Error: Undefined symbol _initial_sp (referred from entry2.o). Error: Undefined symbol _heap_base (referred from malloc.o). Error: Undefined symbol _heap_limit (referred from malloc.o). |
LPC1114FN28はMicrolibを使ってCompileされるため上記のエラーになるようです。
targets/hal/TARGET_NXP/TARGET_LPC176X/gpio_api.c@13:0645d8841f51, 2013-08-05 (annotated)
- Committer:
- bogdanm
- Date:
- Mon Aug 05 14:12:34 2013 +0300
- Revision:
- 13:0645d8841f51
- Parent:
- vendor/NXP/LPC1768/hal/gpio_api.c@10:3bc89ef62ce7
Update mbed sources to revision 64
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
emilmont | 10:3bc89ef62ce7 | 1 | /* mbed Microcontroller Library |
emilmont | 10:3bc89ef62ce7 | 2 | * Copyright (c) 2006-2013 ARM Limited |
emilmont | 10:3bc89ef62ce7 | 3 | * |
emilmont | 10:3bc89ef62ce7 | 4 | * Licensed under the Apache License, Version 2.0 (the "License"); |
emilmont | 10:3bc89ef62ce7 | 5 | * you may not use this file except in compliance with the License. |
emilmont | 10:3bc89ef62ce7 | 6 | * You may obtain a copy of the License at |
emilmont | 10:3bc89ef62ce7 | 7 | * |
emilmont | 10:3bc89ef62ce7 | 8 | * http://www.apache.org/licenses/LICENSE-2.0 |
emilmont | 10:3bc89ef62ce7 | 9 | * |
emilmont | 10:3bc89ef62ce7 | 10 | * Unless required by applicable law or agreed to in writing, software |
emilmont | 10:3bc89ef62ce7 | 11 | * distributed under the License is distributed on an "AS IS" BASIS, |
emilmont | 10:3bc89ef62ce7 | 12 | * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
emilmont | 10:3bc89ef62ce7 | 13 | * See the License for the specific language governing permissions and |
emilmont | 10:3bc89ef62ce7 | 14 | * limitations under the License. |
emilmont | 10:3bc89ef62ce7 | 15 | */ |
emilmont | 10:3bc89ef62ce7 | 16 | #include "gpio_api.h" |
emilmont | 10:3bc89ef62ce7 | 17 | #include "pinmap.h" |
emilmont | 10:3bc89ef62ce7 | 18 | |
emilmont | 10:3bc89ef62ce7 | 19 | uint32_t gpio_set(PinName pin) { |
emilmont | 10:3bc89ef62ce7 | 20 | pin_function(pin, 0); |
emilmont | 10:3bc89ef62ce7 | 21 | return (1 << ((int)pin & 0x1F)); |
emilmont | 10:3bc89ef62ce7 | 22 | } |
emilmont | 10:3bc89ef62ce7 | 23 | |
emilmont | 10:3bc89ef62ce7 | 24 | void gpio_init(gpio_t *obj, PinName pin, PinDirection direction) { |
emilmont | 10:3bc89ef62ce7 | 25 | if(pin == NC) return; |
emilmont | 10:3bc89ef62ce7 | 26 | |
emilmont | 10:3bc89ef62ce7 | 27 | obj->pin = pin; |
emilmont | 10:3bc89ef62ce7 | 28 | obj->mask = gpio_set(pin); |
emilmont | 10:3bc89ef62ce7 | 29 | |
emilmont | 10:3bc89ef62ce7 | 30 | LPC_GPIO_TypeDef *port_reg = (LPC_GPIO_TypeDef *) ((int)pin & ~0x1F); |
emilmont | 10:3bc89ef62ce7 | 31 | obj->reg_set = &port_reg->FIOSET; |
emilmont | 10:3bc89ef62ce7 | 32 | obj->reg_clr = &port_reg->FIOCLR; |
emilmont | 10:3bc89ef62ce7 | 33 | obj->reg_in = &port_reg->FIOPIN; |
emilmont | 10:3bc89ef62ce7 | 34 | obj->reg_dir = &port_reg->FIODIR; |
emilmont | 10:3bc89ef62ce7 | 35 | |
emilmont | 10:3bc89ef62ce7 | 36 | gpio_dir(obj, direction); |
emilmont | 10:3bc89ef62ce7 | 37 | switch (direction) { |
emilmont | 10:3bc89ef62ce7 | 38 | case PIN_OUTPUT: pin_mode(pin, PullNone); break; |
emilmont | 10:3bc89ef62ce7 | 39 | case PIN_INPUT : pin_mode(pin, PullDown); break; |
emilmont | 10:3bc89ef62ce7 | 40 | } |
emilmont | 10:3bc89ef62ce7 | 41 | } |
emilmont | 10:3bc89ef62ce7 | 42 | |
emilmont | 10:3bc89ef62ce7 | 43 | void gpio_mode(gpio_t *obj, PinMode mode) { |
emilmont | 10:3bc89ef62ce7 | 44 | pin_mode(obj->pin, mode); |
emilmont | 10:3bc89ef62ce7 | 45 | } |
emilmont | 10:3bc89ef62ce7 | 46 | |
emilmont | 10:3bc89ef62ce7 | 47 | void gpio_dir(gpio_t *obj, PinDirection direction) { |
emilmont | 10:3bc89ef62ce7 | 48 | switch (direction) { |
emilmont | 10:3bc89ef62ce7 | 49 | case PIN_INPUT : *obj->reg_dir &= ~obj->mask; break; |
emilmont | 10:3bc89ef62ce7 | 50 | case PIN_OUTPUT: *obj->reg_dir |= obj->mask; break; |
emilmont | 10:3bc89ef62ce7 | 51 | } |
emilmont | 10:3bc89ef62ce7 | 52 | } |