first 2016/02 SDFileSystemDMA inherited from Official SDFileSystem.
Dependents: SDFileSystemDMA-test DmdFullRGB_0_1
Fork of SDFileSystemDMA by
SDFileSystemDMA is enhanced SDFileSystem library for STM32 micros by using DMA functionality.
Max read transfer rate reaches over 2MByte/sec at 24MHz SPI clock if enough read buffer size is set.
Even though minimum read buffer size (512Byte) is set, read transfer rate will reach over 1MByte/sec at 24MHz SPI Clock.
( but depends on the ability of each SD card)
Test program is here.
https://developer.mbed.org/users/mimi3/code/SDFileSystemDMA-test/
Supported SPI port is shown below table.
(v): Verified. It works well.
(w): Probably it will work well. (not tested)
(c): Only compiled. (not tested)
(f): Over flash.
(r): Only read mode. (when _FS_READONLY==1)
(u) Under construction
(z): Dose not work.
Caution
If your board has SRAM less than or equal to 8KB, the buffer size must be set to 512 Bytes.
Supported Boards:
Cortex-M0
Board | SRAM | SPI1 | SPI2 | SPI3 |
---|---|---|---|---|
NUCLEO-F030R8 | 8KB | (v) | ||
DISCO-F051R8 | 8KB | (w) | ||
4KB | (f) | |||
NUCLEO-F042K6 | 6KB | (r) | ||
NUCLEO-F070RB | 16KB | (w) | ||
NUCLEO-F072RB | 16KB | (w) | ||
NUCLEO-F091RC | 32KB | (c) |
Cortex-L0
Board | SRAM | SPI1 | SPI2 | SPI3 |
---|---|---|---|---|
DISCO-L053C8 | 8KB | (c) | ||
NUCLEO-L053R8 | 8KB | (c) | ||
NUCLEO-L073RZ | 20KB | (c) |
Cortex-M3
Board | SRAM | SPI1 | SPI2 | SPI3 |
---|---|---|---|---|
DISCO-F100RB | 8KB | (v) | (v) | - |
BLUEPILL-F103CB | 20KB | (w) | (w) | - |
NUCLEO-F103RB | 20KB | (v) | (v) | - |
NUCLEO-L152RE | 80KB | (v) | (w) | - |
MOTE-L152RC | 32KB | (w) | (w) | - |
Cortex-M4
F3
Board | SRAM | SPI1 | SPI2 | SPI3 |
---|---|---|---|---|
DISCO-F303VC | 40KB | - | (v) | (v) |
NUCLEO-F303RE | 64KB | (w) | (w) | (w) |
NUCLEO-F302R8 | 16KB | - | - | (c) |
NUCLEO-F303K8 | 12KB | (c) | - | - |
DISCO-F334C8 | 12KB | (c) | - | - |
NUCLEO-F334R8 | 12KB | (c) | - | - |
F4
Board | SPI1 | SPI2 | SPI3 |
---|---|---|---|
ELMO-F411RE | (w) | - | (w) |
MTS-MDOT-F411RE | (u) | - | (u) |
MTS-DRAGONFLY-F411RE | (w) | - | (w) |
NUCLEO-F411RE | (v) | - | (v) |
NUCLEO-F401RE | (w) | - | (w) |
MTS-MDOT-F405RG | (u) | - | (u) |
NUCLEO-F410RB | (c) | - | (c) |
NUCLEO-F446RE | (c) | - | (c) |
NUCLEO-F429ZI | (c) | - | (c) |
B96B-F446VE | (c) | - | (c) |
NUCLEO-F446ZE | (c) | - | (c) |
DISCO-F429ZI | (u) | - | (u) |
DISCO-F469NI | (c) | - | (c) |
Information
This library is set to use "short file name" in SDFileSystemDMA/FATFileSystem/ChaN/ffconf.h . ( _USE_LFN=0)
You can change this option to _USE_LFN=1 .
Revision 38:7077795dbf81, committed 2017-01-22
- Comitter:
- mimi3
- Date:
- Sun Jan 22 23:13:11 2017 +0900
- Parent:
- 37:844a602e6edf
- Commit message:
- change: table.md
Changed in this revision
table.md | Show annotated file Show diff for this revision Revisions of this file |
--- a/table.md Sun Jan 22 23:12:42 2017 +0900 +++ b/table.md Sun Jan 22 23:13:11 2017 +0900 @@ -21,37 +21,43 @@ ** (u) Under construction ** \\ ** (z): Dose not work. ** \\ + +<<warning title="Caution">> +If your board has SRAM less than or equal to 8KB, the buffer size must be set to 512 Bytes. +<</warning>> + + Supported Boards:\\ **Cortex-M0** -|=Board |=SPI1|=SPI2|=SPI3| -|NUCLEO-F030R8|**(v)**||| -|DISCO-F051R8 |(w) ||| -| --NUCLEO-F031K6-- |(f)||| -| NUCLEO-F042K6 |(r)||| -|NUCLEO-F070RB|(w)||| -|NUCLEO-F072RB|(w)||| -|NUCLEO-F091RC|(c)||| +|=Board |SRAM|=SPI1|=SPI2|=SPI3| +|NUCLEO-F030R8|**8KB**|**(v)**||| +|DISCO-F051R8 |**8KB**|(w) ||| +| --NUCLEO-F031K6-- |4KB|(f)||| +| NUCLEO-F042K6|**6KB**|(r)||| +|NUCLEO-F070RB|16KB|(w)||| +|NUCLEO-F072RB|16KB|(w)||| +|NUCLEO-F091RC|32KB|(c)||| **Cortex-L0** -|=Board |=SPI1|=SPI2|=SPI3| -|DISCO-L053C8 |(c)||| -|NUCLEO-L053R8|(c)||| -|NUCLEO-L073RZ|(c)||| +|=Board |SRAM|=SPI1|=SPI2|=SPI3| +|DISCO-L053C8 |**8KB**|(c)||| +|NUCLEO-L053R8|**8KB**|(c)||| +|NUCLEO-L073RZ|20KB|(c)||| ** Cortex-M3 ** -|=Board |=SPI1|=SPI2|=SPI3| -| DISCO-F100RB |**(v)**|**(v)**|-| -| BLUEPILL-F103CB|(w)|(w)|-| -| NUCLEO-F103RB |**(v)**|**(v)**|-| -| NUCLEO-L152RE |**(v)**|(w)|-| -| MOTE-L152RC |(w)|(w)|-| +|=Board|SRAM |=SPI1|=SPI2|=SPI3| +| DISCO-F100RB |**8KB**|**(v)**|**(v)**|-| +| BLUEPILL-F103CB|20KB|(w)|(w)|-| +| NUCLEO-F103RB |20KB|**(v)**|**(v)**|-| +| NUCLEO-L152RE |80KB|**(v)**|(w)|-| +| MOTE-L152RC |32KB|(w)|(w)|-| ** Cortex-M4 **\\ ** F3 ** -|=Board |=SPI1|=SPI2|=SPI3| -| DISCO-F303VC |-|**(v)**|**(v)**| -| NUCLEO-F303RE|(w)|(w)|(w)| -| NUCLEO-F302R8|-|-|(c)| -| NUCLEO-F303K8|(c)|-|-| -| DISCO-F334C8 |(c)|-|-| -| NUCLEO-F334R8|(c)|-|-| +|=Board |SRAM|=SPI1|=SPI2|=SPI3| +| DISCO-F303VC |40KB|-|**(v)**|**(v)**| +| NUCLEO-F303RE|64KB|(w)|(w)|(w)| +| NUCLEO-F302R8|16KB|-|-|(c)| +| NUCLEO-F303K8|12KB|(c)|-|-| +| DISCO-F334C8 |12KB|(c)|-|-| +| NUCLEO-F334R8|12KB|(c)|-|-| ** F4 ** |=Board |=SPI1|=SPI2|=SPI3| | ELMO-F411RE |(w)|-|(w)| @@ -73,9 +79,10 @@ -** Note ** \\ +<<info title="Information">> This library is set to use "short file name" in SDFileSystemDMA/FATFileSystem/ChaN/ffconf.h . ( _USE_LFN=0) \\ You can change this option to _USE_LFN=1 . +<</info>>