Michael Goyeneche
Radar detector de obstáculos con sensor ultrasonido y motor paso a paso
Dependencies: mbed mbed-STM32F103C8T6 USBDevice_STM32F103 TextLCD HCSR04
Revision 0:29c68dc30a1e, committed 2021-11-18
- Comitter:
- michjpr
- Date:
- Thu Nov 18 03:25:19 2021 +0000
- Commit message:
- Redar deteccion de obstaculos con ultrasonido y motor paso a paso
Changed in this revision
diff -r 000000000000 -r 29c68dc30a1e HCSR042.lib --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/HCSR042.lib Thu Nov 18 03:25:19 2021 +0000 @@ -0,0 +1,1 @@ +https://os.mbed.com/users/prabhuvd/code/HCSR04/#71da0dbf4400
diff -r 000000000000 -r 29c68dc30a1e TextLCD.lib --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TextLCD.lib Thu Nov 18 03:25:19 2021 +0000 @@ -0,0 +1,1 @@ +https://os.mbed.com/users/oscarvzfz/code/TextLCD/#d824a83e56e3
diff -r 000000000000 -r 29c68dc30a1e USBDevice_STM32F103.lib --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/USBDevice_STM32F103.lib Thu Nov 18 03:25:19 2021 +0000 @@ -0,0 +1,1 @@ +https://os.mbed.com/users/hudakz/code/USBDevice_STM32F103/#a6dcac43ceaf
diff -r 000000000000 -r 29c68dc30a1e main.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp Thu Nov 18 03:25:19 2021 +0000
@@ -0,0 +1,122 @@
+#include "stm32f103c8t6.h"
+#include "USBSerial.h"
+#include "mbed.h"
+//#include "HCSR04.h"
+#include "hcsr04.h"
+#include "TextLCD.h"
+Serial pc(USBTX,USBRX);
+HCSR04 ultra(PA_0,PA_1);
+//BusOut motor(PA_4,PA_5,PA_6,PA_7);
+DigitalOut a(PA_4);
+DigitalOut a_(PA_5);
+DigitalOut b(PA_6);
+DigitalOut b_(PA_7);
+int Velocidad = 10000;
+I2C i2c_lcd(PB_9,PB_8); // SDA, SCL
+TextLCD_I2C lcd(&i2c_lcd,0x4E, TextLCD::LCD16x2, TextLCD::HD44780);
+unsigned int dist;
+float range=0;
+int centimetros=0;
+int distancias[2][24];
+int menord=10000;
+int menora=180;
+int tiempo=10000;
+BusOut Anodos(PA_8, PA_9, PA_10, PA_11, PA_12, PA_15, PB_3);
+BusOut Catodos(PB_4,PB_5);
+Ticker ticker1;
+int numeroSeg[10]={0b0111111, 0b0000110, 0b1011011, 0b1001111, 0b1100110, 0b1101101, 0b1111101, 0b0000111, 0b1111111, 0b1101111};
+int numeroCat[2]={0b01, 0b10};
+int menorvec[2];
+int contadorsegmentos=0;
+int i=0;
+ void rotate(){
+ if(i>3){
+ i=0; }
+ else if(i<0){
+ i=3; }
+ if(i==0){
+ a=1;
+ a_=0;
+ b=0;
+ b_=1; }
+ else if(i==1){
+ a=1;
+ a_=0;
+ b=1;
+ b_=0; }
+ else if(i==2){
+ a=0;
+ a_=1;
+ b=1;
+ b_=0; }
+ else if(i==3){
+ a=0;
+ a_=1;
+ b=0;
+ b_=1; }
+ wait(0.01);
+}
+void cw(uint16_t step){
+ for(int count=0;count<step;count++){
+ i++;
+ rotate();
+ }
+}
+
+void Radar(){
+lcd.setBacklight(TextLCD::LightOff);//LightOff, LightOn
+lcd.setCursor(TextLCD::CurOff_BlkOff);//CurOff_BlkOff, CurOn_BlkOff, CurOff_BlkOn, CurOn_BlkOn
+ confSysClock();
+ USBSerial usbSerial(0x1f00, 0x2012, 0x0001, false);
+ for(int i=0;i<24;i++){
+ ultra.start();
+ wait_ms(500);
+ dist=ultra.get_dist_cm();
+ cw(170);//170
+ lcd.cls ();
+ lcd.locate(0,0);
+ lcd.printf("Fuck you men");
+ lcd.locate(0,1);
+ lcd.printf("Gonorrea");
+ distancias[1][i]=i*(360/24);
+ distancias[0][i]=dist;
+ }
+ for(int i=0;i<24;i++){
+ if(distancias[0][i]<menord){
+ menord=distancias[0][i];
+ menora=distancias[1][i];
+ }
+ usbSerial.printf(" [%icm ,", distancias[0][i]);
+ usbSerial.printf(" %i]", distancias[1][i]);
+ }
+ usbSerial.printf(" menor distancia %icm,\r\n", menord);
+ usbSerial.printf(" angulo %i.\r\n", menora);
+ lcd.cls ();
+ lcd.locate(0,0);
+ lcd.printf("menor distancia cm:%ld",menord );
+ wait(5);
+ menorvec[0]=menord/100;
+ menorvec[1]=(menord%100)/10;
+ // menorvec[2]=menord%10;
+ }
+ void segmentos(){
+
+ Catodos=numeroCat[contadorsegmentos];
+ Anodos=numeroSeg[menorvec[contadorsegmentos]];
+ contadorsegmentos+=1;
+ if (contadorsegmentos>2){
+ contadorsegmentos=0;
+ }
+ }
+int main()
+{
+ ticker1.attach(&segmentos, 0.002);
+ Catodos=0b00;
+
+ confSysClock();
+ USBSerial usbSerial(0x1f00, 0x2012, 0x0001, false);
+
+ while(1) {
+ Radar();
+ }
+}
\ No newline at end of file
diff -r 000000000000 -r 29c68dc30a1e mbed-STM32F103C8T6.lib --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed-STM32F103C8T6.lib Thu Nov 18 03:25:19 2021 +0000 @@ -0,0 +1,1 @@ +https://os.mbed.com/users/hudakz/code/mbed-STM32F103C8T6/#727468adfd1d
diff -r 000000000000 -r 29c68dc30a1e mbed.bld --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed.bld Thu Nov 18 03:25:19 2021 +0000 @@ -0,0 +1,1 @@ +https://os.mbed.com/users/mbed_official/code/mbed/builds/65be27845400 \ No newline at end of file