Modification of Mbed-dev library for LQFP48 package microcontrollers: STM32F103C8 (STM32F103C8T6) and STM32F103CB (STM32F103CBT6) (Bluepill boards, Maple mini etc. )

Fork of mbed-dev by mbed official

Warning!

This library is unable to work due to huge changes in the mbed toolchain. Do not use with mbed online!

New wersion:

Import librarymbed-STM32F103C8

Modification of Mbed-dev library for LQFP48 package microcontrollers: STM32F103C8 (STM32F103C8T6) and STM32F103CB (STM32F103CBT6) (Bluepill boards, Maple mini etc. )




Library for STM32F103C8 (Bluepill boards etc.).
Use this instead of mbed library.
This library allows the size of the code in the FLASH up to 128kB. Therefore, code also runs on microcontrollers STM32F103CB (eg. Maple mini).
But in the case of STM32F103C8, check the size of the resulting code would not exceed 64kB.

To compile a program with this library, use NUCLEO-F103RB as the target name. !

Changes:

  • Corrected initialization of the HSE clock (mbed bug), allowing the use of on-board xtal (8MHz).(1)
  • Additionally, it also set USB clock (48Mhz).(2)
  • Definitions of pins and peripherals adjusted to LQFP48 case.
  • Board led LED1 is now PC_13 (3)
  • USER_BUTTON is now PC_14 (4)

notes
(1) - In case 8MHz xtal on board, CPU frequency is 72MHz. Without xtal is 64MHz.
(2) - Using the USB interface is only possible if STM32 is clocking by on-board 8MHz xtal or external clock signal 8MHz on the OSC_IN pin.
(3) - On Bluepill board led operation is reversed, i.e. 0 - led on, 1 - led off.
(4) - Bluepill board has no real user button

Committer:
mega64
Date:
Mon Aug 29 01:00:12 2016 +0000
Revision:
145:54b3c5994df6
Parent:
0:9b334a45a8ff
Change peripherals and pins definitions from LQFP64 to LQFP48 case.;

Who changed what in which revision?

UserRevisionLine numberNew contents of line
bogdanm 0:9b334a45a8ff 1 /* mbed Microcontroller Library
bogdanm 0:9b334a45a8ff 2 * Copyright (c) 2006-2013 ARM Limited
bogdanm 0:9b334a45a8ff 3 *
bogdanm 0:9b334a45a8ff 4 * Licensed under the Apache License, Version 2.0 (the "License");
bogdanm 0:9b334a45a8ff 5 * you may not use this file except in compliance with the License.
bogdanm 0:9b334a45a8ff 6 * You may obtain a copy of the License at
bogdanm 0:9b334a45a8ff 7 *
bogdanm 0:9b334a45a8ff 8 * http://www.apache.org/licenses/LICENSE-2.0
bogdanm 0:9b334a45a8ff 9 *
bogdanm 0:9b334a45a8ff 10 * Unless required by applicable law or agreed to in writing, software
bogdanm 0:9b334a45a8ff 11 * distributed under the License is distributed on an "AS IS" BASIS,
bogdanm 0:9b334a45a8ff 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
bogdanm 0:9b334a45a8ff 13 * See the License for the specific language governing permissions and
bogdanm 0:9b334a45a8ff 14 * limitations under the License.
bogdanm 0:9b334a45a8ff 15 */
bogdanm 0:9b334a45a8ff 16 #ifndef MBED_PORTINOUT_H
bogdanm 0:9b334a45a8ff 17 #define MBED_PORTINOUT_H
bogdanm 0:9b334a45a8ff 18
bogdanm 0:9b334a45a8ff 19 #include "platform.h"
bogdanm 0:9b334a45a8ff 20
bogdanm 0:9b334a45a8ff 21 #if DEVICE_PORTINOUT
bogdanm 0:9b334a45a8ff 22
bogdanm 0:9b334a45a8ff 23 #include "port_api.h"
bogdanm 0:9b334a45a8ff 24
bogdanm 0:9b334a45a8ff 25 namespace mbed {
bogdanm 0:9b334a45a8ff 26
bogdanm 0:9b334a45a8ff 27 /** A multiple pin digital in/out used to set/read multiple bi-directional pins
bogdanm 0:9b334a45a8ff 28 */
bogdanm 0:9b334a45a8ff 29 class PortInOut {
bogdanm 0:9b334a45a8ff 30 public:
bogdanm 0:9b334a45a8ff 31
bogdanm 0:9b334a45a8ff 32 /** Create an PortInOut, connected to the specified port
bogdanm 0:9b334a45a8ff 33 *
bogdanm 0:9b334a45a8ff 34 * @param port Port to connect to (Port0-Port5)
bogdanm 0:9b334a45a8ff 35 * @param mask A bitmask to identify which bits in the port should be included (0 - ignore)
bogdanm 0:9b334a45a8ff 36 */
bogdanm 0:9b334a45a8ff 37 PortInOut(PortName port, int mask = 0xFFFFFFFF) {
bogdanm 0:9b334a45a8ff 38 port_init(&_port, port, mask, PIN_INPUT);
bogdanm 0:9b334a45a8ff 39 }
bogdanm 0:9b334a45a8ff 40
bogdanm 0:9b334a45a8ff 41 /** Write the value to the output port
bogdanm 0:9b334a45a8ff 42 *
bogdanm 0:9b334a45a8ff 43 * @param value An integer specifying a bit to write for every corresponding port pin
bogdanm 0:9b334a45a8ff 44 */
bogdanm 0:9b334a45a8ff 45 void write(int value) {
bogdanm 0:9b334a45a8ff 46 port_write(&_port, value);
bogdanm 0:9b334a45a8ff 47 }
bogdanm 0:9b334a45a8ff 48
bogdanm 0:9b334a45a8ff 49 /** Read the value currently output on the port
bogdanm 0:9b334a45a8ff 50 *
bogdanm 0:9b334a45a8ff 51 * @returns
bogdanm 0:9b334a45a8ff 52 * An integer with each bit corresponding to associated port pin setting
bogdanm 0:9b334a45a8ff 53 */
bogdanm 0:9b334a45a8ff 54 int read() {
bogdanm 0:9b334a45a8ff 55 return port_read(&_port);
bogdanm 0:9b334a45a8ff 56 }
bogdanm 0:9b334a45a8ff 57
bogdanm 0:9b334a45a8ff 58 /** Set as an output
bogdanm 0:9b334a45a8ff 59 */
bogdanm 0:9b334a45a8ff 60 void output() {
bogdanm 0:9b334a45a8ff 61 port_dir(&_port, PIN_OUTPUT);
bogdanm 0:9b334a45a8ff 62 }
bogdanm 0:9b334a45a8ff 63
bogdanm 0:9b334a45a8ff 64 /** Set as an input
bogdanm 0:9b334a45a8ff 65 */
bogdanm 0:9b334a45a8ff 66 void input() {
bogdanm 0:9b334a45a8ff 67 port_dir(&_port, PIN_INPUT);
bogdanm 0:9b334a45a8ff 68 }
bogdanm 0:9b334a45a8ff 69
bogdanm 0:9b334a45a8ff 70 /** Set the input pin mode
bogdanm 0:9b334a45a8ff 71 *
bogdanm 0:9b334a45a8ff 72 * @param mode PullUp, PullDown, PullNone, OpenDrain
bogdanm 0:9b334a45a8ff 73 */
bogdanm 0:9b334a45a8ff 74 void mode(PinMode mode) {
bogdanm 0:9b334a45a8ff 75 port_mode(&_port, mode);
bogdanm 0:9b334a45a8ff 76 }
bogdanm 0:9b334a45a8ff 77
bogdanm 0:9b334a45a8ff 78 /** A shorthand for write()
bogdanm 0:9b334a45a8ff 79 */
bogdanm 0:9b334a45a8ff 80 PortInOut& operator= (int value) {
bogdanm 0:9b334a45a8ff 81 write(value);
bogdanm 0:9b334a45a8ff 82 return *this;
bogdanm 0:9b334a45a8ff 83 }
bogdanm 0:9b334a45a8ff 84
bogdanm 0:9b334a45a8ff 85 PortInOut& operator= (PortInOut& rhs) {
bogdanm 0:9b334a45a8ff 86 write(rhs.read());
bogdanm 0:9b334a45a8ff 87 return *this;
bogdanm 0:9b334a45a8ff 88 }
bogdanm 0:9b334a45a8ff 89
bogdanm 0:9b334a45a8ff 90 /** A shorthand for read()
bogdanm 0:9b334a45a8ff 91 */
bogdanm 0:9b334a45a8ff 92 operator int() {
bogdanm 0:9b334a45a8ff 93 return read();
bogdanm 0:9b334a45a8ff 94 }
bogdanm 0:9b334a45a8ff 95
bogdanm 0:9b334a45a8ff 96 private:
bogdanm 0:9b334a45a8ff 97 port_t _port;
bogdanm 0:9b334a45a8ff 98 };
bogdanm 0:9b334a45a8ff 99
bogdanm 0:9b334a45a8ff 100 } // namespace mbed
bogdanm 0:9b334a45a8ff 101
bogdanm 0:9b334a45a8ff 102 #endif
bogdanm 0:9b334a45a8ff 103
bogdanm 0:9b334a45a8ff 104 #endif