Modification of Mbed-dev library for LQFP48 package microcontrollers: STM32F103C8 (STM32F103C8T6) and STM32F103CB (STM32F103CBT6) (Bluepill boards, Maple mini etc. )

Fork of mbed-STM32F103C8_org by Nothing Special

Library for STM32F103C8 (Bluepill boards etc.).
Use this instead of mbed library.
This library allows the size of the code in the FLASH up to 128kB. Therefore, code also runs on microcontrollers STM32F103CB (eg. Maple mini).
But in the case of STM32F103C8, check the size of the resulting code would not exceed 64kB.

To compile a program with this library, use NUCLEO-F103RB as the target name. !

Changes:

  • Corrected initialization of the HSE + crystal clock (mbed permanent bug), allowing the use of on-board xtal (8MHz).(1)
  • Additionally, it also set USB clock (48Mhz).(2)
  • Definitions of pins and peripherals adjusted to LQFP48 case.
  • Board led LED1 is now PC_13 (3)
  • USER_BUTTON is now PC_14 (4)

    Now the library is complete rebuilt based on mbed-dev v160 (and not yet fully tested).

notes
(1) - In case 8MHz xtal on board, CPU frequency is 72MHz. Without xtal is 64MHz.
(2) - Using the USB interface is only possible if STM32 is clocking by on-board 8MHz xtal or external clock signal 8MHz on the OSC_IN pin.
(3) - On Bluepill board led operation is reversed, i.e. 0 - led on, 1 - led off.
(4) - Bluepill board has no real user button

Information

After export to SW4STM (AC6):

  • add line #include "mbed_config.h" in files Serial.h and RawSerial.h
  • in project properties change Optimisation Level to Optimise for size (-Os)

platform/mbed_semihost_api.c

Committer:
mega64
Date:
2017-04-27
Revision:
148:8b0b02bf146f
Parent:
146:03e976389d16

File content as of revision 148:8b0b02bf146f:

/* mbed Microcontroller Library
 * Copyright (c) 2006-2013 ARM Limited
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
#include "cmsis.h"
#include "platform/mbed_semihost_api.h"

#include <stdint.h>
#include <string.h>

#if DEVICE_SEMIHOST

// ARM Semihosting Commands
#define SYS_OPEN   (0x1)
#define SYS_CLOSE  (0x2)
#define SYS_WRITE  (0x5)
#define SYS_READ   (0x6)
#define SYS_ISTTY  (0x9)
#define SYS_SEEK   (0xa)
#define SYS_ENSURE (0xb)
#define SYS_FLEN   (0xc)
#define SYS_REMOVE (0xe)
#define SYS_RENAME (0xf)
#define SYS_EXIT   (0x18)

// mbed Semihosting Commands
#define RESERVED_FOR_USER_APPLICATIONS (0x100) // 0x100 - 0x1ff
#define USR_XFFIND      (RESERVED_FOR_USER_APPLICATIONS + 0)
#define USR_UID      (RESERVED_FOR_USER_APPLICATIONS + 1)
#define USR_RESET     (RESERVED_FOR_USER_APPLICATIONS + 2)
#define USR_VBUS     (RESERVED_FOR_USER_APPLICATIONS + 3)
#define USR_POWERDOWN     (RESERVED_FOR_USER_APPLICATIONS + 4)
#define USR_DISABLEDEBUG (RESERVED_FOR_USER_APPLICATIONS + 5)

#if DEVICE_LOCALFILESYSTEM
FILEHANDLE semihost_open(const char* name, int openmode) {
    uint32_t args[3];
    args[0] = (uint32_t)name;
    args[1] = (uint32_t)openmode;
    args[2] = (uint32_t)strlen(name);
    return __semihost(SYS_OPEN, args);
}

int semihost_close(FILEHANDLE fh) {
    return __semihost(SYS_CLOSE, &fh);
}

int semihost_write(FILEHANDLE fh, const unsigned char* buffer, unsigned int length, int mode) {
    if (length == 0) return 0;

    uint32_t args[3];
    args[0] = (uint32_t)fh;
    args[1] = (uint32_t)buffer;
    args[2] = (uint32_t)length;
    return __semihost(SYS_WRITE, args);
}

int semihost_read(FILEHANDLE fh, unsigned char* buffer, unsigned int length, int mode) {
    uint32_t args[3];
    args[0] = (uint32_t)fh;
    args[1] = (uint32_t)buffer;
    args[2] = (uint32_t)length;
    return __semihost(SYS_READ, args);
}

int semihost_istty(FILEHANDLE fh) {
    return __semihost(SYS_ISTTY, &fh);
}

int semihost_seek(FILEHANDLE fh, long position) {
    uint32_t args[2];
    args[0] = (uint32_t)fh;
    args[1] = (uint32_t)position;
    return __semihost(SYS_SEEK, args);
}

int semihost_ensure(FILEHANDLE fh) {
    return __semihost(SYS_ENSURE, &fh);
}

long semihost_flen(FILEHANDLE fh) {
    return __semihost(SYS_FLEN, &fh);
}

int semihost_remove(const char *name) {
    uint32_t args[2];
    args[0] = (uint32_t)name;
    args[1] = (uint32_t)strlen(name);
    return __semihost(SYS_REMOVE, args);
}

int semihost_rename(const char *old_name, const char *new_name) {
    uint32_t args[4];
    args[0] = (uint32_t)old_name;
    args[1] = (uint32_t)strlen(old_name);
    args[0] = (uint32_t)new_name;
    args[1] = (uint32_t)strlen(new_name);
    return __semihost(SYS_RENAME, args);
}
#endif

int semihost_exit(void) {
    uint32_t args[4];
    return __semihost(SYS_EXIT, args);
}

int semihost_uid(char *uid) {
    uint32_t args[2];
    args[0] = (uint32_t)uid;
    args[1] = DEVICE_ID_LENGTH + 1;
    return __semihost(USR_UID, &args);
}

int semihost_reset(void) {
    // Does not normally return, however if used with older firmware versions
    // that do not support this call it will return -1.
    return __semihost(USR_RESET, NULL);
}

int semihost_vbus(void) {
    return __semihost(USR_VBUS, NULL);
}

int semihost_powerdown(void) {
    return __semihost(USR_POWERDOWN, NULL);
}

#if DEVICE_DEBUG_AWARENESS

int semihost_connected(void) {
    return (CoreDebug->DHCSR & CoreDebug_DHCSR_C_DEBUGEN_Msk) ? 1 : 0;
}

#else
// These processors cannot know if the interface is connect, assume so:
static int is_debugger_attached = 1;

int semihost_connected(void) {
    return is_debugger_attached;
}
#endif

int semihost_disabledebug(void) {
#if !(DEVICE_DEBUG_AWARENESS)
    is_debugger_attached = 0;
#endif
    return __semihost(USR_DISABLEDEBUG, NULL);
}

#endif