Modification of Mbed-dev library for LQFP48 package microcontrollers: STM32F103C8 (STM32F103C8T6) and STM32F103CB (STM32F103CBT6) (Bluepill boards, Maple mini etc. )

Fork of mbed-STM32F103C8_org by Nothing Special

Library for STM32F103C8 (Bluepill boards etc.).
Use this instead of mbed library.
This library allows the size of the code in the FLASH up to 128kB. Therefore, code also runs on microcontrollers STM32F103CB (eg. Maple mini).
But in the case of STM32F103C8, check the size of the resulting code would not exceed 64kB.

To compile a program with this library, use NUCLEO-F103RB as the target name. !

Changes:

  • Corrected initialization of the HSE + crystal clock (mbed permanent bug), allowing the use of on-board xtal (8MHz).(1)
  • Additionally, it also set USB clock (48Mhz).(2)
  • Definitions of pins and peripherals adjusted to LQFP48 case.
  • Board led LED1 is now PC_13 (3)
  • USER_BUTTON is now PC_14 (4)

    Now the library is complete rebuilt based on mbed-dev v160 (and not yet fully tested).

notes
(1) - In case 8MHz xtal on board, CPU frequency is 72MHz. Without xtal is 64MHz.
(2) - Using the USB interface is only possible if STM32 is clocking by on-board 8MHz xtal or external clock signal 8MHz on the OSC_IN pin.
(3) - On Bluepill board led operation is reversed, i.e. 0 - led on, 1 - led off.
(4) - Bluepill board has no real user button

Information

After export to SW4STM (AC6):

  • add line #include "mbed_config.h" in files Serial.h and RawSerial.h
  • in project properties change Optimisation Level to Optimise for size (-Os)

platform/mbed_retarget.h

Committer:
mega64
Date:
2017-04-27
Revision:
148:8b0b02bf146f
Parent:
146:03e976389d16

File content as of revision 148:8b0b02bf146f:

/*
 * mbed Microcontroller Library
 * Copyright (c) 2006-2016 ARM Limited
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 *
 */

#ifndef RETARGET_H
#define RETARGET_H

#include <stdint.h>
#include <stddef.h>

/* We can get the following standard types from sys/types for gcc, but we
 * need to define the types ourselves for the other compilers that normally
 * target embedded systems */
#if defined(__ARMCC_VERSION) || defined(__ICCARM__)
typedef int ssize_t;    ///< Signed size type, usually encodes negative errors
typedef long off_t;     ///< Offset in a data stream
typedef int mode_t;     ///< Mode for opening files

#define O_RDONLY 0
#define O_WRONLY 1
#define O_RDWR   2
#define O_CREAT  0x0200
#define O_TRUNC  0x0400
#define O_APPEND 0x0008

#define NAME_MAX 255    ///< Maximum size of a name in a file path

#else
#include <sys/fcntl.h>
#include <sys/types.h>
#include <sys/syslimits.h>
#endif


/* DIR declarations must also be here */
#if __cplusplus
namespace mbed { class Dir; }
typedef mbed::Dir DIR;

extern "C" {
    DIR *opendir(const char*);
    struct dirent *readdir(DIR *);
    int closedir(DIR*);
    void rewinddir(DIR*);
    long telldir(DIR*);
    void seekdir(DIR*, long);
    int mkdir(const char *name, mode_t n);
};
#endif


#if defined(__ARMCC_VERSION) || defined(__ICCARM__)
/* The intent of this section is to unify the errno error values to match
 * the POSIX definitions for the GCC_ARM, ARMCC and IAR compilers. This is
 * necessary because the ARMCC/IAR errno.h, or sys/stat.h are missing some
 * symbol definitions used by the POSIX filesystem API to return errno codes.
 * Note also that ARMCC errno.h defines some symbol values differently from
 * the GCC_ARM/IAR/standard POSIX definitions. The definitions guard against
 * this and future changes by changing the symbol definition as shown below. */
#ifdef ENOENT
#undef ENOENT
#endif
#define ENOENT      2       /* No such file or directory. */

#ifdef EIO
#undef EIO
#endif
#define EIO         5       /* I/O error */

#ifdef ENXIO
#undef ENXIO
#endif
#define ENXIO       6       /* No such device or address */

#ifdef ENOEXEC
#undef ENOEXEC
#endif
#define ENOEXEC     8       /* Exec format error */

#ifdef EBADF
#undef EBADF
#endif
#define EBADF       9       /* Bad file number */

#ifdef ENOMEM
#undef ENOMEM
#endif
#define ENOMEM      12      /* Not enough space */

#ifdef EACCES
#undef EACCES
#endif
#define EACCES      13      /* Permission denied */

#ifdef EFAULT
#undef EFAULT
#endif
#define EFAULT      14      /* Bad address */

#ifdef EEXIST
#undef EEXIST
#endif
#define EEXIST      17      /* File exists */

#ifdef EINVAL
#undef EINVAL
#endif
#define EINVAL      22      /* Invalid argument */

#ifdef ENFILE
#undef ENFILE
#endif
#define ENFILE      23      /* Too many open files in system */

#ifdef EMFILE
#undef EMFILE
#endif
#define EMFILE      24      /* File descriptor value too large */

#ifdef ENOSYS
#undef ENOSYS
#endif
#define ENOSYS      38      /* Function not implemented */

/* Missing stat.h defines.
 * The following are sys/stat.h definitions not currently present in the ARMCC
 * errno.h. Note, ARMCC errno.h defines some symbol values differing from
 * GCC_ARM/IAR/standard POSIX definitions. Guard against this and future
 * changes by changing the symbol definition for filesystem use. */
#define     _IFDIR  0040000 /* directory */
#define     _IFREG  0100000 /* regular */

#define S_IFDIR     _IFDIR
#define S_IFREG     _IFREG

#define S_IRWXU     (S_IRUSR | S_IWUSR | S_IXUSR)
#define     S_IRUSR 0000400 /* read permission, owner */
#define     S_IWUSR 0000200 /* write permission, owner */
#define     S_IXUSR 0000100/* execute/search permission, owner */
#define S_IRWXG     (S_IRGRP | S_IWGRP | S_IXGRP)
#define     S_IRGRP 0000040 /* read permission, group */
#define     S_IWGRP 0000020 /* write permission, grougroup */
#define     S_IXGRP 0000010/* execute/search permission, group */
#define S_IRWXO     (S_IROTH | S_IWOTH | S_IXOTH)
#define     S_IROTH 0000004 /* read permission, other */
#define     S_IWOTH 0000002 /* write permission, other */
#define     S_IXOTH 0000001/* execute/search permission, other */

#endif /* defined(__ARMCC_VERSION) || defined(__ICCARM__) */


/* The following are dirent.h definitions are declared here to garuntee
 * consistency where structure may be different with different toolchains */
struct dirent {
    char d_name[NAME_MAX+1];
    uint8_t d_type;
};

enum {
    DT_UNKNOWN, // The file type could not be determined.
    DT_FIFO,    // This is a named pipe (FIFO).
    DT_CHR,     // This is a character device.
    DT_DIR,     // This is a directory.
    DT_BLK,     // This is a block device.
    DT_REG,     // This is a regular file.
    DT_LNK,     // This is a symbolic link.
    DT_SOCK,    // This is a UNIX domain socket.
};


#endif /* RETARGET_H */