Modification of Mbed-dev library for LQFP48 package microcontrollers: STM32F103C8 (STM32F103C8T6) and STM32F103CB (STM32F103CBT6) (Bluepill boards, Maple mini etc. )

Fork of mbed-STM32F103C8_org by Nothing Special

Library for STM32F103C8 (Bluepill boards etc.).
Use this instead of mbed library.
This library allows the size of the code in the FLASH up to 128kB. Therefore, code also runs on microcontrollers STM32F103CB (eg. Maple mini).
But in the case of STM32F103C8, check the size of the resulting code would not exceed 64kB.

To compile a program with this library, use NUCLEO-F103RB as the target name. !

Changes:

  • Corrected initialization of the HSE + crystal clock (mbed permanent bug), allowing the use of on-board xtal (8MHz).(1)
  • Additionally, it also set USB clock (48Mhz).(2)
  • Definitions of pins and peripherals adjusted to LQFP48 case.
  • Board led LED1 is now PC_13 (3)
  • USER_BUTTON is now PC_14 (4)

    Now the library is complete rebuilt based on mbed-dev v160 (and not yet fully tested).

notes
(1) - In case 8MHz xtal on board, CPU frequency is 72MHz. Without xtal is 64MHz.
(2) - Using the USB interface is only possible if STM32 is clocking by on-board 8MHz xtal or external clock signal 8MHz on the OSC_IN pin.
(3) - On Bluepill board led operation is reversed, i.e. 0 - led on, 1 - led off.
(4) - Bluepill board has no real user button

Information

After export to SW4STM (AC6):

  • add line #include "mbed_config.h" in files Serial.h and RawSerial.h
  • in project properties change Optimisation Level to Optimise for size (-Os)

hal/ticker_api.h

Committer:
mega64
Date:
2017-04-27
Revision:
148:8b0b02bf146f
Parent:
147:38a0c20c7b3e

File content as of revision 148:8b0b02bf146f:


/** \addtogroup hal */
/** @{*/
/* mbed Microcontroller Library
 * Copyright (c) 2015 ARM Limited
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
#ifndef MBED_TICKER_API_H
#define MBED_TICKER_API_H

#include <stdint.h>
#include "device.h"

typedef uint32_t timestamp_t;

/** Ticker's event structure
 */
typedef struct ticker_event_s {
    timestamp_t            timestamp; /**< Event's timestamp */
    uint32_t               id;        /**< TimerEvent object */
    struct ticker_event_s *next;      /**< Next event in the queue */
} ticker_event_t;

typedef void (*ticker_event_handler)(uint32_t id);

/** Ticker's interface structure - required API for a ticker
 */
typedef struct {
    void (*init)(void);                           /**< Init function */
    uint32_t (*read)(void);                       /**< Read function */
    void (*disable_interrupt)(void);              /**< Disable interrupt function */
    void (*clear_interrupt)(void);                /**< Clear interrupt function */
    void (*set_interrupt)(timestamp_t timestamp); /**< Set interrupt function */
} ticker_interface_t;

/** Ticker's event queue structure
 */
typedef struct {
    ticker_event_handler event_handler; /**< Event handler */
    ticker_event_t *head;               /**< A pointer to head */
} ticker_event_queue_t;

/** Ticker's data structure
 */
typedef struct {
    const ticker_interface_t *interface; /**< Ticker's interface */
    ticker_event_queue_t *queue;         /**< Ticker's event queue */
} ticker_data_t;

#ifdef __cplusplus
extern "C" {
#endif

/**
 * \defgroup hal_ticker Ticker HAL functions
 * @{
 */

/** Initialize a ticker and set the event handler
 *
 * @param data    The ticker's data
 * @param handler A handler to be set
 */
void ticker_set_handler(const ticker_data_t *const data, ticker_event_handler handler);

/** IRQ handler that goes through the events to trigger overdue events.
 *
 * @param data    The ticker's data
 */
void ticker_irq_handler(const ticker_data_t *const data);

/** Remove an event from the queue
 *
 * @param data The ticker's data
 * @param obj  The event object to be removed from the queue
 */
void ticker_remove_event(const ticker_data_t *const data, ticker_event_t *obj);

/** Insert an event to the queue
 *
 * @param data      The ticker's data
 * @param obj       The event object to be inserted to the queue
 * @param timestamp The event's timestamp
 * @param id        The event object
 */
void ticker_insert_event(const ticker_data_t *const data, ticker_event_t *obj, timestamp_t timestamp, uint32_t id);

/** Read the current ticker's timestamp
 *
 * @param data The ticker's data
 * @return The current timestamp
 */
timestamp_t ticker_read(const ticker_data_t *const data);

/** Read the next event's timestamp
 *
 * @param data The ticker's data
 * @return 1 if timestamp is pending event, 0 if there's no event pending
 */
int ticker_get_next_timestamp(const ticker_data_t *const data, timestamp_t *timestamp);

/**@}*/

#ifdef __cplusplus
}
#endif

#endif

/** @}*/