Modification of Mbed-dev library for LQFP48 package microcontrollers: STM32F103C8 (STM32F103C8T6) and STM32F103CB (STM32F103CBT6) (Bluepill boards, Maple mini etc. )

Fork of mbed-STM32F103C8_org by Nothing Special

Library for STM32F103C8 (Bluepill boards etc.).
Use this instead of mbed library.
This library allows the size of the code in the FLASH up to 128kB. Therefore, code also runs on microcontrollers STM32F103CB (eg. Maple mini).
But in the case of STM32F103C8, check the size of the resulting code would not exceed 64kB.

To compile a program with this library, use NUCLEO-F103RB as the target name. !

Changes:

  • Corrected initialization of the HSE + crystal clock (mbed permanent bug), allowing the use of on-board xtal (8MHz).(1)
  • Additionally, it also set USB clock (48Mhz).(2)
  • Definitions of pins and peripherals adjusted to LQFP48 case.
  • Board led LED1 is now PC_13 (3)
  • USER_BUTTON is now PC_14 (4)

    Now the library is complete rebuilt based on mbed-dev v160 (and not yet fully tested).

notes
(1) - In case 8MHz xtal on board, CPU frequency is 72MHz. Without xtal is 64MHz.
(2) - Using the USB interface is only possible if STM32 is clocking by on-board 8MHz xtal or external clock signal 8MHz on the OSC_IN pin.
(3) - On Bluepill board led operation is reversed, i.e. 0 - led on, 1 - led off.
(4) - Bluepill board has no real user button

Information

After export to SW4STM (AC6):

  • add line #include "mbed_config.h" in files Serial.h and RawSerial.h
  • in project properties change Optimisation Level to Optimise for size (-Os)

drivers/FileSystemLike.h

Committer:
mega64
Date:
2017-04-27
Revision:
148:8b0b02bf146f
Parent:
146:03e976389d16

File content as of revision 148:8b0b02bf146f:

/* mbed Microcontroller Library
 * Copyright (c) 2006-2013 ARM Limited
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
#ifndef MBED_FILESYSTEMLIKE_H
#define MBED_FILESYSTEMLIKE_H

#include "platform/platform.h"

#include "drivers/FileBase.h"
#include "drivers/FileHandle.h"
#include "drivers/DirHandle.h"

namespace mbed {
/** \addtogroup drivers */
/** @{*/

/** A filesystem-like object is one that can be used to open files
 *  though it by fopen("/name/filename", mode)
 *
 *  Implementations must define at least open (the default definitions
 *  of the rest of the functions just return error values).
 *
 * @Note Synchronization level: Set by subclass
 */
class FileSystemLike : public FileBase {

public:
    /** FileSystemLike constructor
     *
     *  @param name The name to use for the filesystem.
     */
    MBED_DEPRECATED_SINCE("mbed-os-5.4",
        "The mbed 2 filesystem classes have been superseeded by the FileSystem api, "
        "Replaced by FileSystem")
    FileSystemLike(const char *name);

    virtual ~FileSystemLike();

    MBED_DEPRECATED_SINCE("mbed-os-5.4",
        "The mbed 2 filesystem classes have been superseeded by the FileSystem api, "
        "Replaced by FileSystem")
    static DirHandle *opendir();
    friend class BaseDirHandle;

    /** Opens a file from the filesystem
     *
     *  @param filename The name of the file to open.
     *  @param flags One of O_RDONLY, O_WRONLY, or O_RDWR, OR'd with
     *    zero or more of O_CREAT, O_TRUNC, or O_APPEND.
     *
     *  @returns
     *    A pointer to a FileHandle object representing the
     *   file on success, or NULL on failure.
     */
    virtual FileHandle *open(const char *filename, int flags) = 0;

    /** Remove a file from the filesystem.
     *
     *  @param filename the name of the file to remove.
     *  @param returns 0 on success, -1 on failure.
     */
    virtual int remove(const char *filename) { (void) filename; return -1; };

    /** Rename a file in the filesystem.
     *
     *  @param oldname the name of the file to rename.
     *  @param newname the name to rename it to.
     *
     *  @returns
     *    0 on success,
     *   -1 on failure.
     */
    virtual int rename(const char *oldname, const char *newname) { (void) oldname, (void) newname; return -1; };

    /** Opens a directory in the filesystem and returns a DirHandle
     *   representing the directory stream.
     *
     *  @param name The name of the directory to open.
     *
     *  @returns
     *    A DirHandle representing the directory stream, or
     *   NULL on failure.
     */
    virtual DirHandle *opendir(const char *name) { (void) name; return NULL; };

    /** Creates a directory in the filesystem.
     *
     *  @param name The name of the directory to create.
     *  @param mode The permissions to create the directory with.
     *
     *  @returns
     *    0 on success,
     *   -1 on failure.
     */
    virtual int mkdir(const char *name, mode_t mode) { (void) name, (void) mode; return -1; }

    /** Store information about file in stat structure
     *
     *  @param name The name of the file to find information about
     *  @param st The stat buffer to write to
     *  @returns
     *    0 on success or un-needed,
     *   -1 on error
     */
    virtual int stat(const char *name, struct stat *st) { return -1; };
};

} // namespace mbed

#endif

/** @}*/