Modification of Mbed-dev library for LQFP48 package microcontrollers: STM32F103C8 (STM32F103C8T6) and STM32F103CB (STM32F103CBT6) (Bluepill boards, Maple mini etc. )

Fork of mbed-STM32F103C8_org by Nothing Special

Library for STM32F103C8 (Bluepill boards etc.).
Use this instead of mbed library.
This library allows the size of the code in the FLASH up to 128kB. Therefore, code also runs on microcontrollers STM32F103CB (eg. Maple mini).
But in the case of STM32F103C8, check the size of the resulting code would not exceed 64kB.

To compile a program with this library, use NUCLEO-F103RB as the target name. !

Changes:

  • Corrected initialization of the HSE + crystal clock (mbed permanent bug), allowing the use of on-board xtal (8MHz).(1)
  • Additionally, it also set USB clock (48Mhz).(2)
  • Definitions of pins and peripherals adjusted to LQFP48 case.
  • Board led LED1 is now PC_13 (3)
  • USER_BUTTON is now PC_14 (4)

    Now the library is complete rebuilt based on mbed-dev v160 (and not yet fully tested).

notes
(1) - In case 8MHz xtal on board, CPU frequency is 72MHz. Without xtal is 64MHz.
(2) - Using the USB interface is only possible if STM32 is clocking by on-board 8MHz xtal or external clock signal 8MHz on the OSC_IN pin.
(3) - On Bluepill board led operation is reversed, i.e. 0 - led on, 1 - led off.
(4) - Bluepill board has no real user button

Information

After export to SW4STM (AC6):

  • add line #include "mbed_config.h" in files Serial.h and RawSerial.h
  • in project properties change Optimisation Level to Optimise for size (-Os)

drivers/FileLike.h

Committer:
mega64
Date:
2017-04-27
Revision:
148:8b0b02bf146f
Parent:
146:03e976389d16

File content as of revision 148:8b0b02bf146f:

/* mbed Microcontroller Library
 * Copyright (c) 2006-2013 ARM Limited
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
#ifndef MBED_FILELIKE_H
#define MBED_FILELIKE_H

#include "platform/mbed_toolchain.h"
#include "drivers/FileBase.h"

namespace mbed {
/** \addtogroup drivers */
/** @{*/


/* Class FileLike
 *  A file-like object is one that can be opened with fopen by
 *  fopen("/name", mode).
 *
 *  @Note Synchronization level: Set by subclass
 */
class FileLike : public FileBase {
public:
    /** Constructor FileLike
     *
     *  @param name     The name to use to open the file.
     */
    FileLike(const char *name = NULL) : FileBase(name, FilePathType) {}
    virtual ~FileLike() {}

    /** Read the contents of a file into a buffer
     *
     *  @param buffer   The buffer to read in to
     *  @param size     The number of bytes to read
     *  @return         The number of bytes read, 0 at end of file, negative error on failure
     */
    virtual ssize_t read(void *buffer, size_t len) = 0;

    /** Write the contents of a buffer to a file
     *
     *  @param buffer   The buffer to write from
     *  @param size     The number of bytes to write 
     *  @return         The number of bytes written, negative error on failure
     */
    virtual ssize_t write(const void *buffer, size_t len) = 0;

    /** Close a file
     *
     *  @return         0 on success, negative error code on failure
     */
    virtual int close() = 0;

    /** Flush any buffers associated with the file
     *
     *  @return         0 on success, negative error code on failure
     */
    virtual int sync() = 0;

    /** Check if the file in an interactive terminal device
     *
     *  @return         True if the file is a terminal
     */
    virtual int isatty() = 0;

    /** Move the file position to a given offset from from a given location
     *
     *  @param offset   The offset from whence to move to
     *  @param whence   The start of where to seek
     *      SEEK_SET to start from beginning of file,
     *      SEEK_CUR to start from current position in file,
     *      SEEK_END to start from end of file
     *  @return         The new offset of the file
     */
    virtual off_t seek(off_t offset, int whence = SEEK_SET) = 0;

    /** Get the file position of the file
     *
     *  @return         The current offset in the file
     */
    virtual off_t tell() = 0;

    /** Rewind the file position to the beginning of the file
     *
     *  @note This is equivalent to file_seek(file, 0, FS_SEEK_SET)
     */
    virtual void rewind() = 0;

    /** Get the size of the file
     *
     *  @return         Size of the file in bytes
     */
    virtual size_t size() = 0;

    /** Move the file position to a given offset from a given location.
     *
     *  @param offset The offset from whence to move to
     *  @param whence SEEK_SET for the start of the file, SEEK_CUR for the
     *   current file position, or SEEK_END for the end of the file.
     *
     *  @returns
     *    new file position on success,
     *    -1 on failure or unsupported
     */
    MBED_DEPRECATED_SINCE("mbed-os-5.4", "Replaced by FileLike::seek")
    virtual off_t lseek(off_t offset, int whence) { return seek(offset, whence); }

    /** Flush any buffers associated with the FileHandle, ensuring it
     *  is up to date on disk
     *
     *  @returns
     *    0 on success or un-needed,
     *   -1 on error
     */
    MBED_DEPRECATED_SINCE("mbed-os-5.4", "Replaced by FileLike::sync")
    virtual int fsync() { return sync(); }

    /** Find the length of the file
     *
     *  @returns
     *   Length of the file
     */
    MBED_DEPRECATED_SINCE("mbed-os-5.4", "Replaced by FileLike::size")
    virtual off_t flen() { return size(); }

protected:
    /** Acquire exclusive access to this object.
     */
    virtual void lock() {
        // Stub
    }

    /** Release exclusive access to this object.
     */
    virtual void unlock() {
        // Stub
    }
};


/** @}*/
} // namespace mbed

#endif