Modification of Mbed-dev library for LQFP48 package microcontrollers: STM32F103C8 (STM32F103C8T6) and STM32F103CB (STM32F103CBT6) (Bluepill boards, Maple mini etc. )

Fork of mbed-STM32F103C8_org by Nothing Special

Library for STM32F103C8 (Bluepill boards etc.).
Use this instead of mbed library.
This library allows the size of the code in the FLASH up to 128kB. Therefore, code also runs on microcontrollers STM32F103CB (eg. Maple mini).
But in the case of STM32F103C8, check the size of the resulting code would not exceed 64kB.

To compile a program with this library, use NUCLEO-F103RB as the target name. !

Changes:

  • Corrected initialization of the HSE + crystal clock (mbed permanent bug), allowing the use of on-board xtal (8MHz).(1)
  • Additionally, it also set USB clock (48Mhz).(2)
  • Definitions of pins and peripherals adjusted to LQFP48 case.
  • Board led LED1 is now PC_13 (3)
  • USER_BUTTON is now PC_14 (4)

    Now the library is complete rebuilt based on mbed-dev v160 (and not yet fully tested).

notes
(1) - In case 8MHz xtal on board, CPU frequency is 72MHz. Without xtal is 64MHz.
(2) - Using the USB interface is only possible if STM32 is clocking by on-board 8MHz xtal or external clock signal 8MHz on the OSC_IN pin.
(3) - On Bluepill board led operation is reversed, i.e. 0 - led on, 1 - led off.
(4) - Bluepill board has no real user button

Information

After export to SW4STM (AC6):

  • add line #include "mbed_config.h" in files Serial.h and RawSerial.h
  • in project properties change Optimisation Level to Optimise for size (-Os)

drivers/DirHandle.h

Committer:
mega64
Date:
2017-04-27
Revision:
148:8b0b02bf146f
Parent:
146:03e976389d16

File content as of revision 148:8b0b02bf146f:

/* mbed Microcontroller Library
 * Copyright (c) 2006-2013 ARM Limited
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
#ifndef MBED_DIRHANDLE_H
#define MBED_DIRHANDLE_H

#include <stdint.h>
#include "platform/platform.h"

#include "FileHandle.h"

namespace mbed {
/** \addtogroup drivers */
/** @{*/

/** Represents a directory stream. Objects of this type are returned
 *  by a FileSystemLike's opendir method. Implementations must define
 *  at least closedir, readdir and rewinddir.
 *
 *  If a FileSystemLike class defines the opendir method, then the
 *  directories of an object of that type can be accessed by
 *  DIR *d = opendir("/example/directory") (or opendir("/example")
 *  to open the root of the filesystem), and then using readdir(d) etc.
 *
 *  The root directory is considered to contain all FileLike and
 *  FileSystemLike objects, so the DIR* returned by opendir("/") will
 *  reflect this.
 *
 *  @Note Synchronization level: Set by subclass
 */
class DirHandle {
public:
    MBED_DEPRECATED_SINCE("mbed-os-5.4",
        "The mbed 2 filesystem classes have been superseeded by the FileSystem api, "
        "Replaced by File")
    DirHandle() {}

    /** Closes the directory.
     *
     *  @returns
     *    0 on success,
     *   -1 on error.
     */
    virtual int closedir()=0;

    /** Return the directory entry at the current position, and
     *  advances the position to the next entry.
     *
     * @returns
     *  A pointer to a dirent structure representing the
     *  directory entry at the current position, or NULL on reaching
     *  end of directory or error.
     */
    virtual struct dirent *readdir()=0;

    /** Resets the position to the beginning of the directory.
     */
    virtual void rewinddir()=0;

    /** Returns the current position of the DirHandle.
     *
     * @returns
     *   the current position,
     *  -1 on error.
     */
    virtual off_t telldir() { return -1; }

    /** Sets the position of the DirHandle.
     *
     *  @param location The location to seek to. Must be a value returned by telldir.
     */
    virtual void seekdir(off_t location) { (void)location;}

    virtual ~DirHandle() {}

protected:

    /** Acquire exclusive access to this object.
     */
    virtual void lock() {
        // Stub
    }

    /** Release exclusive access to this object.
     */
    virtual void unlock() {
        // Stub
    }

protected:
    /** Internal-only constructor to work around deprecated notices when not used
     *. due to nested deprecations and difficulty of compilers finding their way around
     *  the class hierarchy
     */
    friend class FileSystemLike;
    DirHandle(int) {}
};

} // namespace mbed

#endif /* MBED_DIRHANDLE_H */

/** @}*/