Modification of Mbed-dev library for LQFP48 package microcontrollers: STM32F103C8 (STM32F103C8T6) and STM32F103CB (STM32F103CBT6) (Bluepill boards, Maple mini etc. )

Fork of mbed-STM32F103C8_org by Nothing Special

Library for STM32F103C8 (Bluepill boards etc.).
Use this instead of mbed library.
This library allows the size of the code in the FLASH up to 128kB. Therefore, code also runs on microcontrollers STM32F103CB (eg. Maple mini).
But in the case of STM32F103C8, check the size of the resulting code would not exceed 64kB.

To compile a program with this library, use NUCLEO-F103RB as the target name. !

Changes:

  • Corrected initialization of the HSE + crystal clock (mbed permanent bug), allowing the use of on-board xtal (8MHz).(1)
  • Additionally, it also set USB clock (48Mhz).(2)
  • Definitions of pins and peripherals adjusted to LQFP48 case.
  • Board led LED1 is now PC_13 (3)
  • USER_BUTTON is now PC_14 (4)

    Now the library is complete rebuilt based on mbed-dev v160 (and not yet fully tested).

notes
(1) - In case 8MHz xtal on board, CPU frequency is 72MHz. Without xtal is 64MHz.
(2) - Using the USB interface is only possible if STM32 is clocking by on-board 8MHz xtal or external clock signal 8MHz on the OSC_IN pin.
(3) - On Bluepill board led operation is reversed, i.e. 0 - led on, 1 - led off.
(4) - Bluepill board has no real user button

Information

After export to SW4STM (AC6):

  • add line #include "mbed_config.h" in files Serial.h and RawSerial.h
  • in project properties change Optimisation Level to Optimise for size (-Os)
Committer:
mega64
Date:
Thu Apr 27 23:56:38 2017 +0000
Revision:
148:8b0b02bf146f
Parent:
147:38a0c20c7b3e
Remove unnecessary folders

Who changed what in which revision?

UserRevisionLine numberNew contents of line
mega64 147:38a0c20c7b3e 1
mega64 147:38a0c20c7b3e 2 /** \addtogroup hal */
mega64 147:38a0c20c7b3e 3 /** @{*/
mega64 147:38a0c20c7b3e 4 /* mbed Microcontroller Library
mega64 147:38a0c20c7b3e 5 * Copyright (c) 2006-2015 ARM Limited
mega64 147:38a0c20c7b3e 6 *
mega64 147:38a0c20c7b3e 7 * Licensed under the Apache License, Version 2.0 (the "License");
mega64 147:38a0c20c7b3e 8 * you may not use this file except in compliance with the License.
mega64 147:38a0c20c7b3e 9 * You may obtain a copy of the License at
mega64 147:38a0c20c7b3e 10 *
mega64 147:38a0c20c7b3e 11 * http://www.apache.org/licenses/LICENSE-2.0
mega64 147:38a0c20c7b3e 12 *
mega64 147:38a0c20c7b3e 13 * Unless required by applicable law or agreed to in writing, software
mega64 147:38a0c20c7b3e 14 * distributed under the License is distributed on an "AS IS" BASIS,
mega64 147:38a0c20c7b3e 15 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
mega64 147:38a0c20c7b3e 16 * See the License for the specific language governing permissions and
mega64 147:38a0c20c7b3e 17 * limitations under the License.
mega64 147:38a0c20c7b3e 18 */
mega64 147:38a0c20c7b3e 19 #ifndef MBED_US_TICKER_API_H
mega64 147:38a0c20c7b3e 20 #define MBED_US_TICKER_API_H
mega64 147:38a0c20c7b3e 21
mega64 147:38a0c20c7b3e 22 #include <stdint.h>
mega64 147:38a0c20c7b3e 23 #include "hal/ticker_api.h"
mega64 147:38a0c20c7b3e 24
mega64 147:38a0c20c7b3e 25 #ifdef __cplusplus
mega64 147:38a0c20c7b3e 26 extern "C" {
mega64 147:38a0c20c7b3e 27 #endif
mega64 147:38a0c20c7b3e 28
mega64 147:38a0c20c7b3e 29 /**
mega64 147:38a0c20c7b3e 30 * \defgroup hal_UsTicker Microseconds Ticker Functions
mega64 147:38a0c20c7b3e 31 * @{
mega64 147:38a0c20c7b3e 32 */
mega64 147:38a0c20c7b3e 33
mega64 147:38a0c20c7b3e 34 /** Get ticker's data
mega64 147:38a0c20c7b3e 35 *
mega64 147:38a0c20c7b3e 36 * @return The low power ticker data
mega64 147:38a0c20c7b3e 37 */
mega64 147:38a0c20c7b3e 38 const ticker_data_t* get_us_ticker_data(void);
mega64 147:38a0c20c7b3e 39
mega64 147:38a0c20c7b3e 40
mega64 147:38a0c20c7b3e 41 /** The wrapper for ticker_irq_handler, to pass us ticker's data
mega64 147:38a0c20c7b3e 42 *
mega64 147:38a0c20c7b3e 43 */
mega64 147:38a0c20c7b3e 44 void us_ticker_irq_handler(void);
mega64 147:38a0c20c7b3e 45
mega64 147:38a0c20c7b3e 46 /* HAL us ticker */
mega64 147:38a0c20c7b3e 47
mega64 147:38a0c20c7b3e 48 /** Initialize the ticker
mega64 147:38a0c20c7b3e 49 *
mega64 147:38a0c20c7b3e 50 */
mega64 147:38a0c20c7b3e 51 void us_ticker_init(void);
mega64 147:38a0c20c7b3e 52
mega64 147:38a0c20c7b3e 53 /** Read the current counter
mega64 147:38a0c20c7b3e 54 *
mega64 147:38a0c20c7b3e 55 * @return The current timer's counter value in microseconds
mega64 147:38a0c20c7b3e 56 */
mega64 147:38a0c20c7b3e 57 uint32_t us_ticker_read(void);
mega64 147:38a0c20c7b3e 58
mega64 147:38a0c20c7b3e 59 /** Set interrupt for specified timestamp
mega64 147:38a0c20c7b3e 60 *
mega64 147:38a0c20c7b3e 61 * @param timestamp The time in microseconds to be set
mega64 147:38a0c20c7b3e 62 */
mega64 147:38a0c20c7b3e 63 void us_ticker_set_interrupt(timestamp_t timestamp);
mega64 147:38a0c20c7b3e 64
mega64 147:38a0c20c7b3e 65 /** Disable us ticker interrupt
mega64 147:38a0c20c7b3e 66 *
mega64 147:38a0c20c7b3e 67 */
mega64 147:38a0c20c7b3e 68 void us_ticker_disable_interrupt(void);
mega64 147:38a0c20c7b3e 69
mega64 147:38a0c20c7b3e 70 /** Clear us ticker interrupt
mega64 147:38a0c20c7b3e 71 *
mega64 147:38a0c20c7b3e 72 */
mega64 147:38a0c20c7b3e 73 void us_ticker_clear_interrupt(void);
mega64 147:38a0c20c7b3e 74
mega64 147:38a0c20c7b3e 75 /**@}*/
mega64 147:38a0c20c7b3e 76
mega64 147:38a0c20c7b3e 77 #ifdef __cplusplus
mega64 147:38a0c20c7b3e 78 }
mega64 147:38a0c20c7b3e 79 #endif
mega64 147:38a0c20c7b3e 80
mega64 147:38a0c20c7b3e 81 #endif
mega64 147:38a0c20c7b3e 82
mega64 147:38a0c20c7b3e 83 /** @}*/