Nothing Special
Modification of Mbed-dev library for LQFP48 package microcontrollers: STM32F103C8 (STM32F103C8T6) and STM32F103CB (STM32F103CBT6) (Bluepill boards, Maple mini etc. )
Fork of
mbed-STM32F103C8_org
by 
Nothing Special
Library for STM32F103C8 (Bluepill boards etc.).
Use this instead of mbed library.
This library allows the size of the code in the FLASH up to 128kB. Therefore, code also runs on microcontrollers STM32F103CB (eg. Maple mini).
But in the case of STM32F103C8, check the size of the resulting code would not exceed 64kB.
To compile a program with this library, use NUCLEO-F103RB as the target name. !
Changes:
- Corrected initialization of the HSE + crystal clock (mbed permanent bug), allowing the use of on-board xtal (8MHz).(1)
- Additionally, it also set USB clock (48Mhz).(2)
- Definitions of pins and peripherals adjusted to LQFP48 case.
- Board led LED1 is now PC_13 (3)
- USER_BUTTON is now PC_14 (4)
Now the library is complete rebuilt based on mbed-dev v160 (and not yet fully tested).
notes
(1) - In case 8MHz xtal on board, CPU frequency is 72MHz. Without xtal is 64MHz.
(2) - Using the USB interface is only possible if STM32 is clocking by on-board 8MHz xtal or external clock signal 8MHz on the OSC_IN pin.
(3) - On Bluepill board led operation is reversed, i.e. 0 - led on, 1 - led off.
(4) - Bluepill board has no real user button
Information
After export to SW4STM (AC6):
- add line
#include "mbed_config.h"in files Serial.h and RawSerial.h - in project properties change
Optimisation LeveltoOptimise for size (-Os)
hal/rtc_api.h@148:8b0b02bf146f, 2017-04-27 (annotated)
- Committer:
- mega64
- Date:
- Thu Apr 27 23:56:38 2017 +0000
- Revision:
- 148:8b0b02bf146f
- Parent:
- 147:38a0c20c7b3e
Remove unnecessary folders
Who changed what in which revision?
| User | Revision | Line number | New contents of line |
|---|---|---|---|
| mega64 | 147:38a0c20c7b3e | 1 | |
| mega64 | 147:38a0c20c7b3e | 2 | /** \addtogroup hal */ |
| mega64 | 147:38a0c20c7b3e | 3 | /** @{*/ |
| mega64 | 147:38a0c20c7b3e | 4 | /* mbed Microcontroller Library |
| mega64 | 147:38a0c20c7b3e | 5 | * Copyright (c) 2006-2013 ARM Limited |
| mega64 | 147:38a0c20c7b3e | 6 | * |
| mega64 | 147:38a0c20c7b3e | 7 | * Licensed under the Apache License, Version 2.0 (the "License"); |
| mega64 | 147:38a0c20c7b3e | 8 | * you may not use this file except in compliance with the License. |
| mega64 | 147:38a0c20c7b3e | 9 | * You may obtain a copy of the License at |
| mega64 | 147:38a0c20c7b3e | 10 | * |
| mega64 | 147:38a0c20c7b3e | 11 | * http://www.apache.org/licenses/LICENSE-2.0 |
| mega64 | 147:38a0c20c7b3e | 12 | * |
| mega64 | 147:38a0c20c7b3e | 13 | * Unless required by applicable law or agreed to in writing, software |
| mega64 | 147:38a0c20c7b3e | 14 | * distributed under the License is distributed on an "AS IS" BASIS, |
| mega64 | 147:38a0c20c7b3e | 15 | * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| mega64 | 147:38a0c20c7b3e | 16 | * See the License for the specific language governing permissions and |
| mega64 | 147:38a0c20c7b3e | 17 | * limitations under the License. |
| mega64 | 147:38a0c20c7b3e | 18 | */ |
| mega64 | 147:38a0c20c7b3e | 19 | #ifndef MBED_RTC_API_H |
| mega64 | 147:38a0c20c7b3e | 20 | #define MBED_RTC_API_H |
| mega64 | 147:38a0c20c7b3e | 21 | |
| mega64 | 147:38a0c20c7b3e | 22 | #include "device.h" |
| mega64 | 147:38a0c20c7b3e | 23 | |
| mega64 | 147:38a0c20c7b3e | 24 | #if DEVICE_RTC |
| mega64 | 147:38a0c20c7b3e | 25 | |
| mega64 | 147:38a0c20c7b3e | 26 | #include <time.h> |
| mega64 | 147:38a0c20c7b3e | 27 | |
| mega64 | 147:38a0c20c7b3e | 28 | #ifdef __cplusplus |
| mega64 | 147:38a0c20c7b3e | 29 | extern "C" { |
| mega64 | 147:38a0c20c7b3e | 30 | #endif |
| mega64 | 147:38a0c20c7b3e | 31 | |
| mega64 | 147:38a0c20c7b3e | 32 | /** |
| mega64 | 147:38a0c20c7b3e | 33 | * \defgroup hal_rtc RTC hal functions |
| mega64 | 147:38a0c20c7b3e | 34 | * @{ |
| mega64 | 147:38a0c20c7b3e | 35 | */ |
| mega64 | 147:38a0c20c7b3e | 36 | |
| mega64 | 147:38a0c20c7b3e | 37 | /** Initialize the RTC peripheral |
| mega64 | 147:38a0c20c7b3e | 38 | * |
| mega64 | 147:38a0c20c7b3e | 39 | */ |
| mega64 | 147:38a0c20c7b3e | 40 | void rtc_init(void); |
| mega64 | 147:38a0c20c7b3e | 41 | |
| mega64 | 147:38a0c20c7b3e | 42 | /** Deinitialize RTC |
| mega64 | 147:38a0c20c7b3e | 43 | * |
| mega64 | 147:38a0c20c7b3e | 44 | * TODO: The function is not used by rtc api in mbed-drivers. |
| mega64 | 147:38a0c20c7b3e | 45 | */ |
| mega64 | 147:38a0c20c7b3e | 46 | void rtc_free(void); |
| mega64 | 147:38a0c20c7b3e | 47 | |
| mega64 | 147:38a0c20c7b3e | 48 | /** Get the RTC enable status |
| mega64 | 147:38a0c20c7b3e | 49 | * |
| mega64 | 147:38a0c20c7b3e | 50 | * @retval 0 disabled |
| mega64 | 147:38a0c20c7b3e | 51 | * @retval 1 enabled |
| mega64 | 147:38a0c20c7b3e | 52 | */ |
| mega64 | 147:38a0c20c7b3e | 53 | int rtc_isenabled(void); |
| mega64 | 147:38a0c20c7b3e | 54 | |
| mega64 | 147:38a0c20c7b3e | 55 | /** Get the current time from the RTC peripheral |
| mega64 | 147:38a0c20c7b3e | 56 | * |
| mega64 | 147:38a0c20c7b3e | 57 | * @return The current time |
| mega64 | 147:38a0c20c7b3e | 58 | */ |
| mega64 | 147:38a0c20c7b3e | 59 | time_t rtc_read(void); |
| mega64 | 147:38a0c20c7b3e | 60 | |
| mega64 | 147:38a0c20c7b3e | 61 | /** Set the current time to the RTC peripheral |
| mega64 | 147:38a0c20c7b3e | 62 | * |
| mega64 | 147:38a0c20c7b3e | 63 | * @param t The current time to be set |
| mega64 | 147:38a0c20c7b3e | 64 | */ |
| mega64 | 147:38a0c20c7b3e | 65 | void rtc_write(time_t t); |
| mega64 | 147:38a0c20c7b3e | 66 | |
| mega64 | 147:38a0c20c7b3e | 67 | /**@}*/ |
| mega64 | 147:38a0c20c7b3e | 68 | |
| mega64 | 147:38a0c20c7b3e | 69 | #ifdef __cplusplus |
| mega64 | 147:38a0c20c7b3e | 70 | } |
| mega64 | 147:38a0c20c7b3e | 71 | #endif |
| mega64 | 147:38a0c20c7b3e | 72 | |
| mega64 | 147:38a0c20c7b3e | 73 | #endif |
| mega64 | 147:38a0c20c7b3e | 74 | |
| mega64 | 147:38a0c20c7b3e | 75 | #endif |
| mega64 | 147:38a0c20c7b3e | 76 | |
| mega64 | 147:38a0c20c7b3e | 77 | /** @}*/ |