Revision 3:b7fd92ede3a7, committed 2019-07-22

Comitter:

mcm

Date:

Mon Jul 22 10:12:44 2019 +0000

Parent:

2:9931ca41f17d

Commit message:

This driver was completed and tested ( NUCLEO-L152RE ), it works as expected.

Changed in this revision

diff -r 9931ca41f17d -r b7fd92ede3a7 ADS101X.cpp
--- a/ADS101X.cpp	Mon Jul 22 09:48:39 2019 +0000
+++ b/ADS101X.cpp	Mon Jul 22 10:12:44 2019 +0000
@@ -1,6 +1,6 @@
 /**
  * @brief       ADS101X.cpp
- * @details     Capacitive digital sensor for relative humidity and temperature.
+ * @details     Ultra-Small, Low-Power, I2C-Compatible, 3.3-kSPS, 12-Bit ADCs. With Internal Reference, Oscillator, and Programmable Comparator.
  *              Function file.
  *
  *
@@ -11,7 +11,7 @@
  * @version     22/July/2019    The ORIGIN
  * @pre         N/A.
  * @warning     N/A
- * @pre         This code belongs to AqueronteBlog ( http://unbarquero.blogspot.com ). All rights reserved.
+ * @pre         This code belongs to AqueronteBlog ( http://unbarquero.blogspot.com ).
  */
 
 #include "ADS101X.h"

diff -r 9931ca41f17d -r b7fd92ede3a7 ADS101X.h
--- a/ADS101X.h	Mon Jul 22 09:48:39 2019 +0000
+++ b/ADS101X.h	Mon Jul 22 10:12:44 2019 +0000
@@ -7,8 +7,8 @@
  * @return      N/A
  *
  * @author      Manuel Caballero
- * @date        17/July/2019
- * @version     17/July/2019    The ORIGIN
+ * @date        22/July/2019
+ * @version     22/July/2019    The ORIGIN
  * @pre         N/A.
  * @warning     N/A
  * @pre         This code belongs to AqueronteBlog ( http://unbarquero.blogspot.com ).
@@ -22,7 +22,115 @@
 /**
     Example:
 @code
+#include "mbed.h"
+#include "ADS101X.h"
 
+ADS101X myADS101X ( I2C_SDA, I2C_SCL, ADS101X::ADS101X_ADDRESS_GND, 400000, ADS101X::DEVICE_ADS1015 );   // I2C_SDA | I2C_SCL | DEVICE_ADS1015
+Serial pc         ( USBTX, USBRX );                                             // tx, rx
+
+DigitalOut  myled   ( LED1 );
+Ticker      newAction;
+
+
+//@brief Constants.
+
+
+//@brief Variables.
+volatile uint32_t myState;                                                      // State that indicates when to perform a new sample    
+
+
+//@brief   FUNCTION PROTOTYPES
+void    changeDATA     ( void );
+
+
+//@brief FUNCTION FOR APPLICATION MAIN ENTRY.
+int main()
+{
+    ADS101X::ADS101X_status_t aux;
+    ADS101X::ADS101X_data_t   myADS101X_Data;
+
+    pc.baud ( 115200 );
+
+    myled   =   1;
+    wait(3);
+    myled   =   0;
+
+    // Perform a softreset   
+    aux  =   myADS101X.ADS101X_SoftReset  ();
+    wait_ms ( 500U );
+
+    // Input multiplexor configuration ( channels ): AINp = AIN0 | AINn = GND  
+    myADS101X_Data.mux  =   ADS101X::CONFIG_MUX_AINP_AIN0_AND_AINN_GND;
+    aux  =   myADS101X.ADS101X_SetMux  ( myADS101X_Data );
+
+    // Gain: ±4.096V  
+    myADS101X_Data.pga  =   ADS101X::CONFIG_PGA_FSR_4_096_V;
+    aux  =   myADS101X.ADS101X_SetGain  ( myADS101X_Data );
+
+    // Mode: Single-shot 
+    myADS101X_Data.mode  =   ADS101X::CONFIG_MODE_SINGLE_SHOT;
+    aux  =   myADS101X.ADS101X_SetMode  ( myADS101X_Data );
+
+    // Data rate: 1600 SPS  
+    myADS101X_Data.dr  =   ADS101X::CONFIG_DR_1600_SPS;
+    aux  =   myADS101X.ADS101X_SetDataRate  ( myADS101X_Data );
+
+    // Comparator: Disabled 
+    myADS101X_Data.comp_que  =   ADS101X::CONFIG_COMP_QUE_DISABLED;
+    aux  =   myADS101X.ADS101X_SetComparator  ( myADS101X_Data );
+
+    myState  =   0UL;                                                           // Reset the variable
+    newAction.attach( &changeDATA, 1U );                                        // the address of the function to be attached ( changeDATA ) and the interval ( 1s )
+
+    // Let the callbacks take care of everything
+    while(1) {
+        sleep();
+
+        if ( myState == 1UL ) {
+            myled = 1U;
+
+            // Trigger a new conversion  
+            aux  =   myADS101X.ADS101X_StartSingleConversion ();
+
+            // Wait until the conversion is completed  
+            do {
+                aux  =   myADS101X.ADS101X_GetOS ( &myADS101X_Data );
+            } while( ( myADS101X_Data.os & ADS101X::CONFIG_OS_MASK ) == ADS101X::CONFIG_OS_BUSY );  // [TODO] Too dangerous! the uC may get stuck here
+            // [WORKAROUND] Insert a counter.
+            // Get the result  
+            aux  =   myADS101X.ADS101X_GetConversion ( &myADS101X_Data );
+
+            // Send data through the UART    
+            pc.printf ( "V: %d mV\r\n", (int32_t)( 1000 * myADS101X_Data.conversion ) );
+
+
+            // Reset the variables   
+            myState  =   0UL;
+            myled    =   0U;
+        }
+    }
+}
+
+
+// @brief       changeDATA ( void  )
+//
+// @details     It changes myState variable
+//
+// @param[in]    N/A
+//
+// @param[out]   N/A.
+//
+// @return       N/A.
+//
+// @author      Manuel Caballero
+// @date        22/July/2019
+// @version     22/July/2019   The ORIGIN
+// @pre         N/A
+// @warning     N/A.
+void changeDATA ( void )
+{
+    myState  =   1UL;
+}
 @endcode
 */
 
@@ -360,7 +468,7 @@
 private:
     I2C                 _i2c;
     uint32_t            _ADS101X_Addr;
-    ADS101X_device_t    _device;                 
+    ADS101X_device_t    _device;
 };
 
 #endif