mbed official
/
mbed
Important changes to repositories hosted on mbed.com
Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.
To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.
It is also possible to export all your personal repositories from the account settings page.
Dependents: hello SerialTestv11 SerialTestv12 Sierpinski ... more
Diff: TARGET_NUCLEO_L486RG/TARGET_STM/TARGET_STM32L4/device/stm32l4xx_hal_spi.h
- Revision:
- 161:aa5281ff4a02
- Parent:
- 160:5571c4ff569f
diff -r 5571c4ff569f -r aa5281ff4a02 TARGET_NUCLEO_L486RG/TARGET_STM/TARGET_STM32L4/device/stm32l4xx_hal_spi.h
--- a/TARGET_NUCLEO_L486RG/TARGET_STM/TARGET_STM32L4/device/stm32l4xx_hal_spi.h Wed Jan 17 16:13:02 2018 +0000
+++ b/TARGET_NUCLEO_L486RG/TARGET_STM/TARGET_STM32L4/device/stm32l4xx_hal_spi.h Fri Feb 16 16:16:41 2018 +0000
@@ -2,8 +2,6 @@
******************************************************************************
* @file stm32l4xx_hal_spi.h
* @author MCD Application Team
- * @version V1.7.1
- * @date 21-April-2017
* @brief Header file of SPI HAL module.
******************************************************************************
* @attention
@@ -398,16 +396,16 @@
*/
/** @brief Reset SPI handle state.
- * @param __HANDLE__: specifies the SPI Handle.
+ * @param __HANDLE__ specifies the SPI Handle.
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
* @retval None
*/
#define __HAL_SPI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SPI_STATE_RESET)
/** @brief Enable the specified SPI interrupts.
- * @param __HANDLE__: specifies the SPI Handle.
+ * @param __HANDLE__ specifies the SPI Handle.
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
- * @param __INTERRUPT__: specifies the interrupt source to enable.
+ * @param __INTERRUPT__ specifies the interrupt source to enable.
* This parameter can be one of the following values:
* @arg SPI_IT_TXE: Tx buffer empty interrupt enable
* @arg SPI_IT_RXNE: RX buffer not empty interrupt enable
@@ -417,9 +415,9 @@
#define __HAL_SPI_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT((__HANDLE__)->Instance->CR2, (__INTERRUPT__))
/** @brief Disable the specified SPI interrupts.
- * @param __HANDLE__: specifies the SPI handle.
+ * @param __HANDLE__ specifies the SPI handle.
* This parameter can be SPIx where x: 1, 2, or 3 to select the SPI peripheral.
- * @param __INTERRUPT__: specifies the interrupt source to disable.
+ * @param __INTERRUPT__ specifies the interrupt source to disable.
* This parameter can be one of the following values:
* @arg SPI_IT_TXE: Tx buffer empty interrupt enable
* @arg SPI_IT_RXNE: RX buffer not empty interrupt enable
@@ -429,9 +427,9 @@
#define __HAL_SPI_DISABLE_IT(__HANDLE__, __INTERRUPT__) CLEAR_BIT((__HANDLE__)->Instance->CR2, (__INTERRUPT__))
/** @brief Check whether the specified SPI interrupt source is enabled or not.
- * @param __HANDLE__: specifies the SPI Handle.
+ * @param __HANDLE__ specifies the SPI Handle.
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
- * @param __INTERRUPT__: specifies the SPI interrupt source to check.
+ * @param __INTERRUPT__ specifies the SPI interrupt source to check.
* This parameter can be one of the following values:
* @arg SPI_IT_TXE: Tx buffer empty interrupt enable
* @arg SPI_IT_RXNE: RX buffer not empty interrupt enable
@@ -441,9 +439,9 @@
#define __HAL_SPI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
/** @brief Check whether the specified SPI flag is set or not.
- * @param __HANDLE__: specifies the SPI Handle.
+ * @param __HANDLE__ specifies the SPI Handle.
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
- * @param __FLAG__: specifies the flag to check.
+ * @param __FLAG__ specifies the flag to check.
* This parameter can be one of the following values:
* @arg SPI_FLAG_RXNE: Receive buffer not empty flag
* @arg SPI_FLAG_TXE: Transmit buffer empty flag
@@ -459,14 +457,14 @@
#define __HAL_SPI_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
/** @brief Clear the SPI CRCERR pending flag.
- * @param __HANDLE__: specifies the SPI Handle.
+ * @param __HANDLE__ specifies the SPI Handle.
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
* @retval None
*/
#define __HAL_SPI_CLEAR_CRCERRFLAG(__HANDLE__) ((__HANDLE__)->Instance->SR = (uint16_t)(~SPI_FLAG_CRCERR))
/** @brief Clear the SPI MODF pending flag.
- * @param __HANDLE__: specifies the SPI Handle.
+ * @param __HANDLE__ specifies the SPI Handle.
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
* @retval None
*/
@@ -479,7 +477,7 @@
} while(0U)
/** @brief Clear the SPI OVR pending flag.
- * @param __HANDLE__: specifies the SPI Handle.
+ * @param __HANDLE__ specifies the SPI Handle.
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
* @retval None
*/
@@ -492,7 +490,7 @@
} while(0U)
/** @brief Clear the SPI FRE pending flag.
- * @param __HANDLE__: specifies the SPI Handle.
+ * @param __HANDLE__ specifies the SPI Handle.
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
* @retval None
*/
@@ -504,14 +502,14 @@
}while(0U)
/** @brief Enable the SPI peripheral.
- * @param __HANDLE__: specifies the SPI Handle.
+ * @param __HANDLE__ specifies the SPI Handle.
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
* @retval None
*/
#define __HAL_SPI_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_SPE)
/** @brief Disable the SPI peripheral.
- * @param __HANDLE__: specifies the SPI Handle.
+ * @param __HANDLE__ specifies the SPI Handle.
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
* @retval None
*/
@@ -527,92 +525,168 @@
*/
/** @brief Set the SPI transmit-only mode.
- * @param __HANDLE__: specifies the SPI Handle.
+ * @param __HANDLE__ specifies the SPI Handle.
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
* @retval None
*/
#define SPI_1LINE_TX(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_BIDIOE)
/** @brief Set the SPI receive-only mode.
- * @param __HANDLE__: specifies the SPI Handle.
+ * @param __HANDLE__ specifies the SPI Handle.
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
* @retval None
*/
#define SPI_1LINE_RX(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_BIDIOE)
/** @brief Reset the CRC calculation of the SPI.
- * @param __HANDLE__: specifies the SPI Handle.
+ * @param __HANDLE__ specifies the SPI Handle.
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
* @retval None
*/
#define SPI_RESET_CRC(__HANDLE__) do{CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_CRCEN);\
SET_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_CRCEN);}while(0U)
-#define IS_SPI_MODE(MODE) (((MODE) == SPI_MODE_SLAVE) || \
- ((MODE) == SPI_MODE_MASTER))
+/** @brief Checks if SPI Mode parameter is in allowed range.
+ * @param __MODE__ specifies the SPI Mode.
+ * This parameter can be a value of @ref SPI_Mode
+ * @retval None
+ */
+#define IS_SPI_MODE(__MODE__) (((__MODE__) == SPI_MODE_SLAVE) || \
+ ((__MODE__) == SPI_MODE_MASTER))
-#define IS_SPI_DIRECTION(MODE) (((MODE) == SPI_DIRECTION_2LINES) || \
- ((MODE) == SPI_DIRECTION_2LINES_RXONLY) || \
- ((MODE) == SPI_DIRECTION_1LINE))
+/** @brief Checks if SPI Direction Mode parameter is in allowed range.
+ * @param __MODE__ specifies the SPI Direction Mode.
+ * This parameter can be a value of @ref SPI_Direction
+ * @retval None
+ */
+#define IS_SPI_DIRECTION(__MODE__) (((__MODE__) == SPI_DIRECTION_2LINES) || \
+ ((__MODE__) == SPI_DIRECTION_2LINES_RXONLY) || \
+ ((__MODE__) == SPI_DIRECTION_1LINE))
-#define IS_SPI_DIRECTION_2LINES(MODE) ((MODE) == SPI_DIRECTION_2LINES)
+/** @brief Checks if SPI Direction Mode parameter is 2 lines.
+ * @param __MODE__ specifies the SPI Direction Mode.
+ * @retval None
+ */
+#define IS_SPI_DIRECTION_2LINES(__MODE__) ((__MODE__) == SPI_DIRECTION_2LINES)
-#define IS_SPI_DIRECTION_2LINES_OR_1LINE(MODE) (((MODE) == SPI_DIRECTION_2LINES) || \
- ((MODE) == SPI_DIRECTION_1LINE))
+/** @brief Checks if SPI Direction Mode parameter is 1 or 2 lines.
+ * @param __MODE__ specifies the SPI Direction Mode.
+ * @retval None
+ */
+#define IS_SPI_DIRECTION_2LINES_OR_1LINE(__MODE__) (((__MODE__) == SPI_DIRECTION_2LINES) || \
+ ((__MODE__) == SPI_DIRECTION_1LINE))
-#define IS_SPI_DATASIZE(DATASIZE) (((DATASIZE) == SPI_DATASIZE_16BIT) || \
- ((DATASIZE) == SPI_DATASIZE_15BIT) || \
- ((DATASIZE) == SPI_DATASIZE_14BIT) || \
- ((DATASIZE) == SPI_DATASIZE_13BIT) || \
- ((DATASIZE) == SPI_DATASIZE_12BIT) || \
- ((DATASIZE) == SPI_DATASIZE_11BIT) || \
- ((DATASIZE) == SPI_DATASIZE_10BIT) || \
- ((DATASIZE) == SPI_DATASIZE_9BIT) || \
- ((DATASIZE) == SPI_DATASIZE_8BIT) || \
- ((DATASIZE) == SPI_DATASIZE_7BIT) || \
- ((DATASIZE) == SPI_DATASIZE_6BIT) || \
- ((DATASIZE) == SPI_DATASIZE_5BIT) || \
- ((DATASIZE) == SPI_DATASIZE_4BIT))
+/** @brief Checks if SPI Data Size parameter is in allowed range.
+ * @param __DATASIZE__ specifies the SPI Data Size.
+ * This parameter can be a value of @ref SPI_Data_Size
+ * @retval None
+ */
+#define IS_SPI_DATASIZE(__DATASIZE__) (((__DATASIZE__) == SPI_DATASIZE_16BIT) || \
+ ((__DATASIZE__) == SPI_DATASIZE_15BIT) || \
+ ((__DATASIZE__) == SPI_DATASIZE_14BIT) || \
+ ((__DATASIZE__) == SPI_DATASIZE_13BIT) || \
+ ((__DATASIZE__) == SPI_DATASIZE_12BIT) || \
+ ((__DATASIZE__) == SPI_DATASIZE_11BIT) || \
+ ((__DATASIZE__) == SPI_DATASIZE_10BIT) || \
+ ((__DATASIZE__) == SPI_DATASIZE_9BIT) || \
+ ((__DATASIZE__) == SPI_DATASIZE_8BIT) || \
+ ((__DATASIZE__) == SPI_DATASIZE_7BIT) || \
+ ((__DATASIZE__) == SPI_DATASIZE_6BIT) || \
+ ((__DATASIZE__) == SPI_DATASIZE_5BIT) || \
+ ((__DATASIZE__) == SPI_DATASIZE_4BIT))
-#define IS_SPI_CPOL(CPOL) (((CPOL) == SPI_POLARITY_LOW) || \
- ((CPOL) == SPI_POLARITY_HIGH))
+/** @brief Checks if SPI Serial clock steady state parameter is in allowed range.
+ * @param __CPOL__ specifies the SPI serial clock steady state.
+ * This parameter can be a value of @ref SPI_Clock_Polarity
+ * @retval None
+ */
+#define IS_SPI_CPOL(__CPOL__) (((__CPOL__) == SPI_POLARITY_LOW) || \
+ ((__CPOL__) == SPI_POLARITY_HIGH))
-#define IS_SPI_CPHA(CPHA) (((CPHA) == SPI_PHASE_1EDGE) || \
- ((CPHA) == SPI_PHASE_2EDGE))
+/** @brief Checks if SPI Clock Phase parameter is in allowed range.
+ * @param __CPHA__ specifies the SPI Clock Phase.
+ * This parameter can be a value of @ref SPI_Clock_Phase
+ * @retval None
+ */
+#define IS_SPI_CPHA(__CPHA__) (((__CPHA__) == SPI_PHASE_1EDGE) || \
+ ((__CPHA__) == SPI_PHASE_2EDGE))
-#define IS_SPI_NSS(NSS) (((NSS) == SPI_NSS_SOFT) || \
- ((NSS) == SPI_NSS_HARD_INPUT) || \
- ((NSS) == SPI_NSS_HARD_OUTPUT))
-
-#define IS_SPI_NSSP(NSSP) (((NSSP) == SPI_NSS_PULSE_ENABLE) || \
- ((NSSP) == SPI_NSS_PULSE_DISABLE))
+/** @brief Checks if SPI Slave Select parameter is in allowed range.
+ * @param __NSS__ specifies the SPI Slave Slelect management parameter.
+ * This parameter can be a value of @ref SPI_Slave_Select_management
+ * @retval None
+ */
+#define IS_SPI_NSS(__NSS__) (((__NSS__) == SPI_NSS_SOFT) || \
+ ((__NSS__) == SPI_NSS_HARD_INPUT) || \
+ ((__NSS__) == SPI_NSS_HARD_OUTPUT))
-#define IS_SPI_BAUDRATE_PRESCALER(PRESCALER) (((PRESCALER) == SPI_BAUDRATEPRESCALER_2) || \
- ((PRESCALER) == SPI_BAUDRATEPRESCALER_4) || \
- ((PRESCALER) == SPI_BAUDRATEPRESCALER_8) || \
- ((PRESCALER) == SPI_BAUDRATEPRESCALER_16) || \
- ((PRESCALER) == SPI_BAUDRATEPRESCALER_32) || \
- ((PRESCALER) == SPI_BAUDRATEPRESCALER_64) || \
- ((PRESCALER) == SPI_BAUDRATEPRESCALER_128) || \
- ((PRESCALER) == SPI_BAUDRATEPRESCALER_256))
+/** @brief Checks if SPI NSS Pulse parameter is in allowed range.
+ * @param __NSSP__ specifies the SPI NSS Pulse Mode parameter.
+ * This parameter can be a value of @ref SPI_NSSP_Mode
+ * @retval None
+ */
+#define IS_SPI_NSSP(__NSSP__) (((__NSSP__) == SPI_NSS_PULSE_ENABLE) || \
+ ((__NSSP__) == SPI_NSS_PULSE_DISABLE))
+
+/** @brief Checks if SPI Baudrate prescaler parameter is in allowed range.
+ * @param __PRESCALER__ specifies the SPI Baudrate prescaler.
+ * This parameter can be a value of @ref SPI_BaudRate_Prescaler
+ * @retval None
+ */
+#define IS_SPI_BAUDRATE_PRESCALER(__PRESCALER__) (((__PRESCALER__) == SPI_BAUDRATEPRESCALER_2) || \
+ ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_4) || \
+ ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_8) || \
+ ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_16) || \
+ ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_32) || \
+ ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_64) || \
+ ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_128) || \
+ ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_256))
-#define IS_SPI_FIRST_BIT(BIT) (((BIT) == SPI_FIRSTBIT_MSB) || \
- ((BIT) == SPI_FIRSTBIT_LSB))
+/** @brief Checks if SPI MSB LSB transmission parameter is in allowed range.
+ * @param __BIT__ specifies the SPI MSB LSB transmission (whether data transfer starts from MSB or LSB bit).
+ * This parameter can be a value of @ref SPI_MSB_LSB_transmission
+ * @retval None
+ */
+#define IS_SPI_FIRST_BIT(__BIT__) (((__BIT__) == SPI_FIRSTBIT_MSB) || \
+ ((__BIT__) == SPI_FIRSTBIT_LSB))
-#define IS_SPI_TIMODE(MODE) (((MODE) == SPI_TIMODE_DISABLE) || \
- ((MODE) == SPI_TIMODE_ENABLE))
-
-#define IS_SPI_CRC_CALCULATION(CALCULATION) (((CALCULATION) == SPI_CRCCALCULATION_DISABLE) || \
- ((CALCULATION) == SPI_CRCCALCULATION_ENABLE))
+/** @brief Checks if SPI TI mode parameter is in allowed range.
+ * @param __MODE__ specifies the SPI TI mode.
+ * This parameter can be a value of @ref SPI_TI_mode
+ * @retval None
+ */
+#define IS_SPI_TIMODE(__MODE__) (((__MODE__) == SPI_TIMODE_DISABLE) || \
+ ((__MODE__) == SPI_TIMODE_ENABLE))
-#define IS_SPI_CRC_LENGTH(LENGTH) (((LENGTH) == SPI_CRC_LENGTH_DATASIZE) ||\
- ((LENGTH) == SPI_CRC_LENGTH_8BIT) || \
- ((LENGTH) == SPI_CRC_LENGTH_16BIT))
+/** @brief Checks if SPI CRC calculation enabled state is in allowed range.
+ * @param __CALCULATION__ specifies the SPI CRC calculation enable state.
+ * This parameter can be a value of @ref SPI_CRC_Calculation
+ * @retval None
+ */
+#define IS_SPI_CRC_CALCULATION(__CALCULATION__) (((__CALCULATION__) == SPI_CRCCALCULATION_DISABLE) || \
+ ((__CALCULATION__) == SPI_CRCCALCULATION_ENABLE))
-#define IS_SPI_CRC_POLYNOMIAL(POLYNOMIAL) (((POLYNOMIAL) >= 0x1U) && ((POLYNOMIAL) <= 0xFFFFU) && (((POLYNOMIAL)&0x1U) != 0U))
+/** @brief Checks if SPI CRC length is in allowed range.
+ * @param __LENGTH__ specifies the SPI CRC length.
+ * This parameter can be a value of @ref SPI_CRC_length
+ * @retval None
+ */
+#define IS_SPI_CRC_LENGTH(__LENGTH__) (((__LENGTH__) == SPI_CRC_LENGTH_DATASIZE) ||\
+ ((__LENGTH__) == SPI_CRC_LENGTH_8BIT) || \
+ ((__LENGTH__) == SPI_CRC_LENGTH_16BIT))
-#define IS_SPI_DMA_HANDLE(HANDLE) ((HANDLE) != NULL)
+/** @brief Checks if SPI polynomial value to be used for the CRC calculation, is in allowed range.
+ * @param __POLYNOMIAL__ specifies the SPI polynomial value to be used for the CRC calculation.
+ * This parameter must be a number between Min_Data = 0 and Max_Data = 65535
+ * @retval None
+ */
+#define IS_SPI_CRC_POLYNOMIAL(__POLYNOMIAL__) (((__POLYNOMIAL__) >= 0x1U) && ((__POLYNOMIAL__) <= 0xFFFFU) && (((__POLYNOMIAL__)&0x1U) != 0U))
+/** @brief Checks if DMA handle is valid.
+ * @param __HANDLE__ specifies a DMA Handle.
+ * @retval None
+ */
+#define IS_SPI_DMA_HANDLE(__HANDLE__) ((__HANDLE__) != NULL)
/**
* @}
