Diff: TARGET_KW41Z/TOOLCHAIN_ARM_STD/PinNames.h

Revision:

171:3a7713b1edbc

Child:

172:65be27845400

diff -r e95d10626187 -r 3a7713b1edbc TARGET_KW41Z/TOOLCHAIN_ARM_STD/PinNames.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_KW41Z/TOOLCHAIN_ARM_STD/PinNames.h	Thu Nov 08 11:45:42 2018 +0000
@@ -0,0 +1,125 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+    PIN_INPUT,
+    PIN_OUTPUT
+} PinDirection;
+
+#define GPIO_PORT_SHIFT 12
+
+typedef enum {
+    PTA0  = (0 << GPIO_PORT_SHIFT | 0),
+    PTA1  = (0 << GPIO_PORT_SHIFT | 1),
+    PTA2  = (0 << GPIO_PORT_SHIFT | 2),
+    PTA16 = (0 << GPIO_PORT_SHIFT | 16),
+    PTA17 = (0 << GPIO_PORT_SHIFT | 17),
+    PTA18 = (0 << GPIO_PORT_SHIFT | 18),
+    PTA19 = (0 << GPIO_PORT_SHIFT | 19),
+    PTB0  = (1 << GPIO_PORT_SHIFT | 0),
+    PTB1  = (1 << GPIO_PORT_SHIFT | 1),
+    PTB2  = (1 << GPIO_PORT_SHIFT | 2),
+    PTB3  = (1 << GPIO_PORT_SHIFT | 3),
+    PTB16 = (1 << GPIO_PORT_SHIFT | 16),
+    PTB17 = (1 << GPIO_PORT_SHIFT | 17),
+    PTB18 = (1 << GPIO_PORT_SHIFT | 18),
+    PTC1  = (2 << GPIO_PORT_SHIFT | 1),
+    PTC2  = (2 << GPIO_PORT_SHIFT | 2),
+    PTC3  = (2 << GPIO_PORT_SHIFT | 3),
+    PTC4  = (2 << GPIO_PORT_SHIFT | 4),
+    PTC5  = (2 << GPIO_PORT_SHIFT | 5),
+    PTC6  = (2 << GPIO_PORT_SHIFT | 6),
+    PTC7  = (2 << GPIO_PORT_SHIFT | 7),
+    PTC16 = (2 << GPIO_PORT_SHIFT | 16),
+    PTC17 = (2 << GPIO_PORT_SHIFT | 17),
+    PTC18 = (2 << GPIO_PORT_SHIFT | 18),
+    PTC19 = (2 << GPIO_PORT_SHIFT | 19),
+
+    LED_RED   = PTC1,
+    LED_GREEN = PTA19,
+    LED_BLUE  = PTA18,
+
+    // mbed original LED naming
+    LED1 = LED_RED,
+    LED2 = LED_GREEN,
+    LED3 = LED_BLUE,
+    LED4 = LED_RED,
+
+    //Push buttons
+    SW3 = PTC4,
+    SW4 = PTC5,
+    // Standardized button names
+    BUTTON1 = SW3,
+    BUTTON2 = SW4,
+
+    // USB Pins
+    USBTX = PTC7,
+    USBRX = PTC6,
+
+    // Arduino Headers
+    D0 = PTC6,
+    D1 = PTC7,
+    D2 = PTC19,
+    D3 = PTC16,
+    D4 = PTC4,
+    D5 = PTC17,
+    D6 = PTC18,
+    D7 = PTA1,
+    D8 = PTA0,
+    D9 = PTC1,
+    D10 = PTA19,
+    D11 = PTA16,
+    D12 = PTA17,
+    D13 = PTA18,
+    D14 = PTC3,
+    D15 = PTC2,
+
+    I2C_SCL = D15,
+    I2C_SDA = D14,
+
+    DAC0_OUT = PTB18,
+
+    A1 = DAC0_OUT,
+    A2 = PTB2,
+    A3 = PTB3,
+    A4 = PTB1,
+    A5 = PTB0,
+
+    // Not connected
+    NC = (int)0xFFFFFFFF
+} PinName;
+
+
+typedef enum {
+    PullNone = 0,
+    PullDown = 1,
+    PullUp   = 2,
+    PullDefault = PullUp
+} PinMode;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif