mbed official / mbed

Important changes to repositories hosted on mbed.com

Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.

To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.

It is also possible to export all your personal repositories from the account settings page.

Dependents:   hello SerialTestv11 SerialTestv12 Sierpinski ... more

TARGET_EFM32HG_STK3400/TARGET_Silicon_Labs/TARGET_EFM32/TARGET_EFM32HG/TARGET_EFM32HG_STK3400/PinNames.h@138:093f2bd7b9eb, 2017-03-14 (annotated)

Committer:
<>
Date:
Tue Mar 14 16:20:51 2017 +0000
Revision:
138:093f2bd7b9eb
Parent:
132:9baf128c2fab
Child:
142:4eea097334d6
Release 138 of the mbed library



Ports for Upcoming Targets





Fixes and Changes



3716: fix for issue #3715: correction in startup files for ARM and IAR, alignment of system_stm32f429xx.c files https://github.com/ARMmbed/mbed-os/pull/3716

3741: STM32 remove warning in hal_tick_32b.c file https://github.com/ARMmbed/mbed-os/pull/3741

3780: STM32L4 : Fix GPIO G port compatibility https://github.com/ARMmbed/mbed-os/pull/3780

3831: NCS36510: SPISLAVE enabled (Conflict resolved) https://github.com/ARMmbed/mbed-os/pull/3831

3836: Allow to redefine nRF's PSTORAGE_NUM_OF_PAGES outside of the mbed-os https://github.com/ARMmbed/mbed-os/pull/3836

3840: STM32: gpio SPEED - always set High Speed by default https://github.com/ARMmbed/mbed-os/pull/3840

3844: STM32 GPIO: Typo correction. Update comment (GPIO_IP_WITHOUT_BRR) https://github.com/ARMmbed/mbed-os/pull/3844

3850: STM32: change spi error to debug warning https://github.com/ARMmbed/mbed-os/pull/3850

3860: Define GPIO_IP_WITHOUT_BRR for xDot platform https://github.com/ARMmbed/mbed-os/pull/3860

3880: DISCO_F469NI: allow the use of CAN2 instance when CAN1 is not activated https://github.com/ARMmbed/mbed-os/pull/3880

3795: Fix pwm period calc https://github.com/ARMmbed/mbed-os/pull/3795

3828: STM32 CAN API: correct format and type https://github.com/ARMmbed/mbed-os/pull/3828

3842: TARGET_NRF: corrected spi_init() to properly handle re-initialization https://github.com/ARMmbed/mbed-os/pull/3842

3843: STM32L476xG: set APB2 clock to 80MHz (instead of 40MHz) https://github.com/ARMmbed/mbed-os/pull/3843

3879: NUCLEO_F446ZE: Add missing AnalogIn pins on PF_3, PF_5 and PF_10. https://github.com/ARMmbed/mbed-os/pull/3879

3902: Fix heap and stack size for NUCLEO_F746ZG https://github.com/ARMmbed/mbed-os/pull/3902

3829: can_write(): return error code when no tx mailboxes are available https://github.com/ARMmbed/mbed-os/pull/3829

Who changed what in which revision?

UserRevisionLine numberNew contents of line
<> 128:9bcdf88f62b0 1 /***************************************************************************//**
<> 128:9bcdf88f62b0 2 * @file PinNames.h
<> 128:9bcdf88f62b0 3 *******************************************************************************
<> 128:9bcdf88f62b0 4 * @section License
<> 128:9bcdf88f62b0 5 * <b>(C) Copyright 2015 Silicon Labs, http://www.silabs.com</b>
<> 128:9bcdf88f62b0 6 *******************************************************************************
<> 128:9bcdf88f62b0 7 *
<> 128:9bcdf88f62b0 8 * SPDX-License-Identifier: Apache-2.0
<> 128:9bcdf88f62b0 9 *
<> 128:9bcdf88f62b0 10 * Licensed under the Apache License, Version 2.0 (the "License"); you may
<> 128:9bcdf88f62b0 11 * not use this file except in compliance with the License.
<> 128:9bcdf88f62b0 12 * You may obtain a copy of the License at
<> 128:9bcdf88f62b0 13 *
<> 128:9bcdf88f62b0 14 * http://www.apache.org/licenses/LICENSE-2.0
<> 128:9bcdf88f62b0 15 *
<> 128:9bcdf88f62b0 16 * Unless required by applicable law or agreed to in writing, software
<> 128:9bcdf88f62b0 17 * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
<> 128:9bcdf88f62b0 18 * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
<> 128:9bcdf88f62b0 19 * See the License for the specific language governing permissions and
<> 128:9bcdf88f62b0 20 * limitations under the License.
<> 128:9bcdf88f62b0 21 *
<> 128:9bcdf88f62b0 22 ******************************************************************************/
<> 128:9bcdf88f62b0 23 #ifndef MBED_PINNAMES_H
<> 128:9bcdf88f62b0 24 #define MBED_PINNAMES_H
<> 128:9bcdf88f62b0 25
<> 128:9bcdf88f62b0 26 #include "CommonPinNames.h"
<> 128:9bcdf88f62b0 27
<> 128:9bcdf88f62b0 28 #ifdef __cplusplus
<> 128:9bcdf88f62b0 29 extern "C" {
<> 128:9bcdf88f62b0 30 #endif
<> 128:9bcdf88f62b0 31
<> 128:9bcdf88f62b0 32 typedef enum {
<> 128:9bcdf88f62b0 33 EFM32_STANDARD_PIN_DEFINITIONS,
<> 128:9bcdf88f62b0 34
<> 128:9bcdf88f62b0 35 /* Starter Kit says LED0 and LED1, but mbed expects 1 and 2. This way using 1 and 2 or 0 and 1 will work. */
<> 128:9bcdf88f62b0 36 LED0 = PF4,
<> 128:9bcdf88f62b0 37 LED1 = PF5,
<> 128:9bcdf88f62b0 38 LED2 = LED0,
<> 128:9bcdf88f62b0 39 LED3 = LED0,
<> 128:9bcdf88f62b0 40 LED4 = LED1,
<> 128:9bcdf88f62b0 41
<> 128:9bcdf88f62b0 42 /* Push Buttons */
<> 128:9bcdf88f62b0 43 SW0 = PC9,
<> 128:9bcdf88f62b0 44 SW1 = PC10,
<> 128:9bcdf88f62b0 45 BTN0 = SW0,
<> 128:9bcdf88f62b0 46 BTN1 = SW1,
<> 128:9bcdf88f62b0 47
<> 128:9bcdf88f62b0 48 /* Serial */
<> 128:9bcdf88f62b0 49 SERIAL_TX = PE10,
<> 128:9bcdf88f62b0 50 SERIAL_RX = PE11,
<> 128:9bcdf88f62b0 51 USBTX = PF2,
<> 128:9bcdf88f62b0 52 USBRX = PA0,
<> 128:9bcdf88f62b0 53
<> 128:9bcdf88f62b0 54 /* Board Controller */
<> 128:9bcdf88f62b0 55 STDIO_UART_TX = USBTX,
<> 132:9baf128c2fab 56 STDIO_UART_RX = USBRX
<> 128:9bcdf88f62b0 57 } PinName;
<> 128:9bcdf88f62b0 58
<> 128:9bcdf88f62b0 59 #ifdef __cplusplus
<> 128:9bcdf88f62b0 60 }
<> 128:9bcdf88f62b0 61 #endif
<> 128:9bcdf88f62b0 62
<> 128:9bcdf88f62b0 63 #endif