mbed official / mbed

Important changes to repositories hosted on mbed.com

Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.

To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.

It is also possible to export all your personal repositories from the account settings page.

Dependents:   hello SerialTestv11 SerialTestv12 Sierpinski ... more

TARGET_MTS_MDOT_F411RE/stm32f4xx_hal_sd.h@106:ba1f97679dad, 2015-09-02 (annotated)

Committer:
Kojto
Date:
Wed Sep 02 14:17:43 2015 +0100
Revision:
106:ba1f97679dad
Parent:
99:dbbf35b96557
Child:
110:165afa46840b
Release 106  of the mbed library



Changes:

- new platform - Nucleo F446RE

- STM32F4 Cube driver update v2.3.2

- ST cmsis driver v2.3.2

- nordic bugfix gcc linker start address

- lpc11u68 - bugfix for serial ports

Who changed what in which revision?

UserRevisionLine numberNew contents of line
Kojto 93:e188a91d3eaa 1 /**
Kojto 93:e188a91d3eaa 2 ******************************************************************************
Kojto 93:e188a91d3eaa 3 * @file stm32f4xx_hal_sd.h
Kojto 93:e188a91d3eaa 4 * @author MCD Application Team
Kojto 106:ba1f97679dad 5 * @version V1.3.2
Kojto 106:ba1f97679dad 6 * @date 26-June-2015
Kojto 93:e188a91d3eaa 7 * @brief Header file of SD HAL module.
Kojto 93:e188a91d3eaa 8 ******************************************************************************
Kojto 93:e188a91d3eaa 9 * @attention
Kojto 93:e188a91d3eaa 10 *
Kojto 99:dbbf35b96557 11 * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
Kojto 93:e188a91d3eaa 12 *
Kojto 93:e188a91d3eaa 13 * Redistribution and use in source and binary forms, with or without modification,
Kojto 93:e188a91d3eaa 14 * are permitted provided that the following conditions are met:
Kojto 93:e188a91d3eaa 15 * 1. Redistributions of source code must retain the above copyright notice,
Kojto 93:e188a91d3eaa 16 * this list of conditions and the following disclaimer.
Kojto 93:e188a91d3eaa 17 * 2. Redistributions in binary form must reproduce the above copyright notice,
Kojto 93:e188a91d3eaa 18 * this list of conditions and the following disclaimer in the documentation
Kojto 93:e188a91d3eaa 19 * and/or other materials provided with the distribution.
Kojto 93:e188a91d3eaa 20 * 3. Neither the name of STMicroelectronics nor the names of its contributors
Kojto 93:e188a91d3eaa 21 * may be used to endorse or promote products derived from this software
Kojto 93:e188a91d3eaa 22 * without specific prior written permission.
Kojto 93:e188a91d3eaa 23 *
Kojto 93:e188a91d3eaa 24 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
Kojto 93:e188a91d3eaa 25 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
Kojto 93:e188a91d3eaa 26 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
Kojto 93:e188a91d3eaa 27 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
Kojto 93:e188a91d3eaa 28 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
Kojto 93:e188a91d3eaa 29 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
Kojto 93:e188a91d3eaa 30 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
Kojto 93:e188a91d3eaa 31 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
Kojto 93:e188a91d3eaa 32 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
Kojto 93:e188a91d3eaa 33 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Kojto 93:e188a91d3eaa 34 *
Kojto 93:e188a91d3eaa 35 ******************************************************************************
Kojto 93:e188a91d3eaa 36 */
Kojto 93:e188a91d3eaa 37
Kojto 93:e188a91d3eaa 38 /* Define to prevent recursive inclusion -------------------------------------*/
Kojto 93:e188a91d3eaa 39 #ifndef __STM32F4xx_HAL_SD_H
Kojto 93:e188a91d3eaa 40 #define __STM32F4xx_HAL_SD_H
Kojto 93:e188a91d3eaa 41
Kojto 93:e188a91d3eaa 42 #ifdef __cplusplus
Kojto 93:e188a91d3eaa 43 extern "C" {
Kojto 93:e188a91d3eaa 44 #endif
Kojto 93:e188a91d3eaa 45
Kojto 93:e188a91d3eaa 46 /* Includes ------------------------------------------------------------------*/
Kojto 93:e188a91d3eaa 47 #include "stm32f4xx_ll_sdmmc.h"
Kojto 93:e188a91d3eaa 48
Kojto 93:e188a91d3eaa 49 /** @addtogroup STM32F4xx_HAL_Driver
Kojto 93:e188a91d3eaa 50 * @{
Kojto 93:e188a91d3eaa 51 */
Kojto 93:e188a91d3eaa 52
Kojto 99:dbbf35b96557 53 /** @defgroup SD SD
Kojto 99:dbbf35b96557 54 * @brief SD HAL module driver
Kojto 93:e188a91d3eaa 55 * @{
Kojto 99:dbbf35b96557 56 */
Kojto 93:e188a91d3eaa 57
Kojto 93:e188a91d3eaa 58 /* Exported types ------------------------------------------------------------*/
Kojto 99:dbbf35b96557 59 /** @defgroup SD_Exported_Types SD Exported Types
Kojto 99:dbbf35b96557 60 * @{
Kojto 99:dbbf35b96557 61 */
Kojto 99:dbbf35b96557 62
Kojto 99:dbbf35b96557 63 /** @defgroup SD_Exported_Types_Group1 SD Handle Structure definition
Kojto 93:e188a91d3eaa 64 * @{
Kojto 93:e188a91d3eaa 65 */
Kojto 93:e188a91d3eaa 66 #define SD_InitTypeDef SDIO_InitTypeDef
Kojto 93:e188a91d3eaa 67 #define SD_TypeDef SDIO_TypeDef
Kojto 93:e188a91d3eaa 68
Kojto 93:e188a91d3eaa 69 typedef struct
Kojto 93:e188a91d3eaa 70 {
Kojto 93:e188a91d3eaa 71 SD_TypeDef *Instance; /*!< SDIO register base address */
Kojto 93:e188a91d3eaa 72
Kojto 93:e188a91d3eaa 73 SD_InitTypeDef Init; /*!< SD required parameters */
Kojto 93:e188a91d3eaa 74
Kojto 93:e188a91d3eaa 75 HAL_LockTypeDef Lock; /*!< SD locking object */
Kojto 93:e188a91d3eaa 76
Kojto 93:e188a91d3eaa 77 uint32_t CardType; /*!< SD card type */
Kojto 93:e188a91d3eaa 78
Kojto 93:e188a91d3eaa 79 uint32_t RCA; /*!< SD relative card address */
Kojto 93:e188a91d3eaa 80
Kojto 93:e188a91d3eaa 81 uint32_t CSD[4]; /*!< SD card specific data table */
Kojto 93:e188a91d3eaa 82
Kojto 93:e188a91d3eaa 83 uint32_t CID[4]; /*!< SD card identification number table */
Kojto 93:e188a91d3eaa 84
Kojto 93:e188a91d3eaa 85 __IO uint32_t SdTransferCplt; /*!< SD transfer complete flag in non blocking mode */
Kojto 93:e188a91d3eaa 86
Kojto 93:e188a91d3eaa 87 __IO uint32_t SdTransferErr; /*!< SD transfer error flag in non blocking mode */
Kojto 93:e188a91d3eaa 88
Kojto 93:e188a91d3eaa 89 __IO uint32_t DmaTransferCplt; /*!< SD DMA transfer complete flag */
Kojto 93:e188a91d3eaa 90
Kojto 93:e188a91d3eaa 91 __IO uint32_t SdOperation; /*!< SD transfer operation (read/write) */
Kojto 93:e188a91d3eaa 92
Kojto 93:e188a91d3eaa 93 DMA_HandleTypeDef *hdmarx; /*!< SD Rx DMA handle parameters */
Kojto 93:e188a91d3eaa 94
Kojto 93:e188a91d3eaa 95 DMA_HandleTypeDef *hdmatx; /*!< SD Tx DMA handle parameters */
Kojto 93:e188a91d3eaa 96
Kojto 93:e188a91d3eaa 97 }SD_HandleTypeDef;
Kojto 99:dbbf35b96557 98 /**
Kojto 99:dbbf35b96557 99 * @}
Kojto 99:dbbf35b96557 100 */
Kojto 93:e188a91d3eaa 101
Kojto 99:dbbf35b96557 102 /** @defgroup SD_Exported_Types_Group2 Card Specific Data: CSD Register
Kojto 99:dbbf35b96557 103 * @{
Kojto 93:e188a91d3eaa 104 */
Kojto 93:e188a91d3eaa 105 typedef struct
Kojto 93:e188a91d3eaa 106 {
Kojto 93:e188a91d3eaa 107 __IO uint8_t CSDStruct; /*!< CSD structure */
Kojto 93:e188a91d3eaa 108 __IO uint8_t SysSpecVersion; /*!< System specification version */
Kojto 93:e188a91d3eaa 109 __IO uint8_t Reserved1; /*!< Reserved */
Kojto 93:e188a91d3eaa 110 __IO uint8_t TAAC; /*!< Data read access time 1 */
Kojto 93:e188a91d3eaa 111 __IO uint8_t NSAC; /*!< Data read access time 2 in CLK cycles */
Kojto 93:e188a91d3eaa 112 __IO uint8_t MaxBusClkFrec; /*!< Max. bus clock frequency */
Kojto 93:e188a91d3eaa 113 __IO uint16_t CardComdClasses; /*!< Card command classes */
Kojto 93:e188a91d3eaa 114 __IO uint8_t RdBlockLen; /*!< Max. read data block length */
Kojto 93:e188a91d3eaa 115 __IO uint8_t PartBlockRead; /*!< Partial blocks for read allowed */
Kojto 93:e188a91d3eaa 116 __IO uint8_t WrBlockMisalign; /*!< Write block misalignment */
Kojto 93:e188a91d3eaa 117 __IO uint8_t RdBlockMisalign; /*!< Read block misalignment */
Kojto 93:e188a91d3eaa 118 __IO uint8_t DSRImpl; /*!< DSR implemented */
Kojto 93:e188a91d3eaa 119 __IO uint8_t Reserved2; /*!< Reserved */
Kojto 93:e188a91d3eaa 120 __IO uint32_t DeviceSize; /*!< Device Size */
Kojto 93:e188a91d3eaa 121 __IO uint8_t MaxRdCurrentVDDMin; /*!< Max. read current @ VDD min */
Kojto 93:e188a91d3eaa 122 __IO uint8_t MaxRdCurrentVDDMax; /*!< Max. read current @ VDD max */
Kojto 93:e188a91d3eaa 123 __IO uint8_t MaxWrCurrentVDDMin; /*!< Max. write current @ VDD min */
Kojto 93:e188a91d3eaa 124 __IO uint8_t MaxWrCurrentVDDMax; /*!< Max. write current @ VDD max */
Kojto 93:e188a91d3eaa 125 __IO uint8_t DeviceSizeMul; /*!< Device size multiplier */
Kojto 93:e188a91d3eaa 126 __IO uint8_t EraseGrSize; /*!< Erase group size */
Kojto 93:e188a91d3eaa 127 __IO uint8_t EraseGrMul; /*!< Erase group size multiplier */
Kojto 93:e188a91d3eaa 128 __IO uint8_t WrProtectGrSize; /*!< Write protect group size */
Kojto 93:e188a91d3eaa 129 __IO uint8_t WrProtectGrEnable; /*!< Write protect group enable */
Kojto 93:e188a91d3eaa 130 __IO uint8_t ManDeflECC; /*!< Manufacturer default ECC */
Kojto 93:e188a91d3eaa 131 __IO uint8_t WrSpeedFact; /*!< Write speed factor */
Kojto 93:e188a91d3eaa 132 __IO uint8_t MaxWrBlockLen; /*!< Max. write data block length */
Kojto 93:e188a91d3eaa 133 __IO uint8_t WriteBlockPaPartial; /*!< Partial blocks for write allowed */
Kojto 93:e188a91d3eaa 134 __IO uint8_t Reserved3; /*!< Reserved */
Kojto 93:e188a91d3eaa 135 __IO uint8_t ContentProtectAppli; /*!< Content protection application */
Kojto 93:e188a91d3eaa 136 __IO uint8_t FileFormatGrouop; /*!< File format group */
Kojto 93:e188a91d3eaa 137 __IO uint8_t CopyFlag; /*!< Copy flag (OTP) */
Kojto 93:e188a91d3eaa 138 __IO uint8_t PermWrProtect; /*!< Permanent write protection */
Kojto 93:e188a91d3eaa 139 __IO uint8_t TempWrProtect; /*!< Temporary write protection */
Kojto 93:e188a91d3eaa 140 __IO uint8_t FileFormat; /*!< File format */
Kojto 93:e188a91d3eaa 141 __IO uint8_t ECC; /*!< ECC code */
Kojto 93:e188a91d3eaa 142 __IO uint8_t CSD_CRC; /*!< CSD CRC */
Kojto 93:e188a91d3eaa 143 __IO uint8_t Reserved4; /*!< Always 1 */
Kojto 93:e188a91d3eaa 144
Kojto 93:e188a91d3eaa 145 }HAL_SD_CSDTypedef;
Kojto 99:dbbf35b96557 146 /**
Kojto 99:dbbf35b96557 147 * @}
Kojto 99:dbbf35b96557 148 */
Kojto 93:e188a91d3eaa 149
Kojto 99:dbbf35b96557 150 /** @defgroup SD_Exported_Types_Group3 Card Identification Data: CID Register
Kojto 99:dbbf35b96557 151 * @{
Kojto 99:dbbf35b96557 152 */
Kojto 93:e188a91d3eaa 153 typedef struct
Kojto 93:e188a91d3eaa 154 {
Kojto 93:e188a91d3eaa 155 __IO uint8_t ManufacturerID; /*!< Manufacturer ID */
Kojto 93:e188a91d3eaa 156 __IO uint16_t OEM_AppliID; /*!< OEM/Application ID */
Kojto 93:e188a91d3eaa 157 __IO uint32_t ProdName1; /*!< Product Name part1 */
Kojto 93:e188a91d3eaa 158 __IO uint8_t ProdName2; /*!< Product Name part2 */
Kojto 93:e188a91d3eaa 159 __IO uint8_t ProdRev; /*!< Product Revision */
Kojto 93:e188a91d3eaa 160 __IO uint32_t ProdSN; /*!< Product Serial Number */
Kojto 93:e188a91d3eaa 161 __IO uint8_t Reserved1; /*!< Reserved1 */
Kojto 93:e188a91d3eaa 162 __IO uint16_t ManufactDate; /*!< Manufacturing Date */
Kojto 93:e188a91d3eaa 163 __IO uint8_t CID_CRC; /*!< CID CRC */
Kojto 93:e188a91d3eaa 164 __IO uint8_t Reserved2; /*!< Always 1 */
Kojto 93:e188a91d3eaa 165
Kojto 93:e188a91d3eaa 166 }HAL_SD_CIDTypedef;
Kojto 99:dbbf35b96557 167 /**
Kojto 99:dbbf35b96557 168 * @}
Kojto 99:dbbf35b96557 169 */
Kojto 93:e188a91d3eaa 170
Kojto 99:dbbf35b96557 171 /** @defgroup SD_Exported_Types_Group4 SD Card Status returned by ACMD13
Kojto 99:dbbf35b96557 172 * @{
Kojto 99:dbbf35b96557 173 */
Kojto 93:e188a91d3eaa 174 typedef struct
Kojto 93:e188a91d3eaa 175 {
Kojto 93:e188a91d3eaa 176 __IO uint8_t DAT_BUS_WIDTH; /*!< Shows the currently defined data bus width */
Kojto 93:e188a91d3eaa 177 __IO uint8_t SECURED_MODE; /*!< Card is in secured mode of operation */
Kojto 93:e188a91d3eaa 178 __IO uint16_t SD_CARD_TYPE; /*!< Carries information about card type */
Kojto 93:e188a91d3eaa 179 __IO uint32_t SIZE_OF_PROTECTED_AREA; /*!< Carries information about the capacity of protected area */
Kojto 93:e188a91d3eaa 180 __IO uint8_t SPEED_CLASS; /*!< Carries information about the speed class of the card */
Kojto 93:e188a91d3eaa 181 __IO uint8_t PERFORMANCE_MOVE; /*!< Carries information about the card's performance move */
Kojto 93:e188a91d3eaa 182 __IO uint8_t AU_SIZE; /*!< Carries information about the card's allocation unit size */
Kojto 93:e188a91d3eaa 183 __IO uint16_t ERASE_SIZE; /*!< Determines the number of AUs to be erased in one operation */
Kojto 93:e188a91d3eaa 184 __IO uint8_t ERASE_TIMEOUT; /*!< Determines the timeout for any number of AU erase */
Kojto 93:e188a91d3eaa 185 __IO uint8_t ERASE_OFFSET; /*!< Carries information about the erase offset */
Kojto 93:e188a91d3eaa 186
Kojto 93:e188a91d3eaa 187 }HAL_SD_CardStatusTypedef;
Kojto 99:dbbf35b96557 188 /**
Kojto 99:dbbf35b96557 189 * @}
Kojto 99:dbbf35b96557 190 */
Kojto 93:e188a91d3eaa 191
Kojto 99:dbbf35b96557 192 /** @defgroup SD_Exported_Types_Group5 SD Card information structure
Kojto 99:dbbf35b96557 193 * @{
Kojto 99:dbbf35b96557 194 */
Kojto 93:e188a91d3eaa 195 typedef struct
Kojto 93:e188a91d3eaa 196 {
Kojto 93:e188a91d3eaa 197 HAL_SD_CSDTypedef SD_csd; /*!< SD card specific data register */
Kojto 93:e188a91d3eaa 198 HAL_SD_CIDTypedef SD_cid; /*!< SD card identification number register */
Kojto 93:e188a91d3eaa 199 uint64_t CardCapacity; /*!< Card capacity */
Kojto 93:e188a91d3eaa 200 uint32_t CardBlockSize; /*!< Card block size */
Kojto 93:e188a91d3eaa 201 uint16_t RCA; /*!< SD relative card address */
Kojto 93:e188a91d3eaa 202 uint8_t CardType; /*!< SD card type */
Kojto 93:e188a91d3eaa 203
Kojto 93:e188a91d3eaa 204 }HAL_SD_CardInfoTypedef;
Kojto 99:dbbf35b96557 205 /**
Kojto 99:dbbf35b96557 206 * @}
Kojto 99:dbbf35b96557 207 */
Kojto 93:e188a91d3eaa 208
Kojto 99:dbbf35b96557 209 /** @defgroup SD_Exported_Types_Group6 SD Error status enumeration Structure definition
Kojto 99:dbbf35b96557 210 * @{
Kojto 99:dbbf35b96557 211 */
Kojto 93:e188a91d3eaa 212 typedef enum
Kojto 93:e188a91d3eaa 213 {
Kojto 93:e188a91d3eaa 214 /**
Kojto 93:e188a91d3eaa 215 * @brief SD specific error defines
Kojto 93:e188a91d3eaa 216 */
Kojto 93:e188a91d3eaa 217 SD_CMD_CRC_FAIL = (1), /*!< Command response received (but CRC check failed) */
Kojto 93:e188a91d3eaa 218 SD_DATA_CRC_FAIL = (2), /*!< Data block sent/received (CRC check failed) */
Kojto 93:e188a91d3eaa 219 SD_CMD_RSP_TIMEOUT = (3), /*!< Command response timeout */
Kojto 93:e188a91d3eaa 220 SD_DATA_TIMEOUT = (4), /*!< Data timeout */
Kojto 93:e188a91d3eaa 221 SD_TX_UNDERRUN = (5), /*!< Transmit FIFO underrun */
Kojto 93:e188a91d3eaa 222 SD_RX_OVERRUN = (6), /*!< Receive FIFO overrun */
Kojto 93:e188a91d3eaa 223 SD_START_BIT_ERR = (7), /*!< Start bit not detected on all data signals in wide bus mode */
Kojto 93:e188a91d3eaa 224 SD_CMD_OUT_OF_RANGE = (8), /*!< Command's argument was out of range. */
Kojto 93:e188a91d3eaa 225 SD_ADDR_MISALIGNED = (9), /*!< Misaligned address */
Kojto 93:e188a91d3eaa 226 SD_BLOCK_LEN_ERR = (10), /*!< Transferred block length is not allowed for the card or the number of transferred bytes does not match the block length */
Kojto 93:e188a91d3eaa 227 SD_ERASE_SEQ_ERR = (11), /*!< An error in the sequence of erase command occurs. */
Kojto 93:e188a91d3eaa 228 SD_BAD_ERASE_PARAM = (12), /*!< An invalid selection for erase groups */
Kojto 93:e188a91d3eaa 229 SD_WRITE_PROT_VIOLATION = (13), /*!< Attempt to program a write protect block */
Kojto 93:e188a91d3eaa 230 SD_LOCK_UNLOCK_FAILED = (14), /*!< Sequence or password error has been detected in unlock command or if there was an attempt to access a locked card */
Kojto 93:e188a91d3eaa 231 SD_COM_CRC_FAILED = (15), /*!< CRC check of the previous command failed */
Kojto 93:e188a91d3eaa 232 SD_ILLEGAL_CMD = (16), /*!< Command is not legal for the card state */
Kojto 93:e188a91d3eaa 233 SD_CARD_ECC_FAILED = (17), /*!< Card internal ECC was applied but failed to correct the data */
Kojto 93:e188a91d3eaa 234 SD_CC_ERROR = (18), /*!< Internal card controller error */
Kojto 93:e188a91d3eaa 235 SD_GENERAL_UNKNOWN_ERROR = (19), /*!< General or unknown error */
Kojto 93:e188a91d3eaa 236 SD_STREAM_READ_UNDERRUN = (20), /*!< The card could not sustain data transfer in stream read operation. */
Kojto 93:e188a91d3eaa 237 SD_STREAM_WRITE_OVERRUN = (21), /*!< The card could not sustain data programming in stream mode */
Kojto 93:e188a91d3eaa 238 SD_CID_CSD_OVERWRITE = (22), /*!< CID/CSD overwrite error */
Kojto 93:e188a91d3eaa 239 SD_WP_ERASE_SKIP = (23), /*!< Only partial address space was erased */
Kojto 93:e188a91d3eaa 240 SD_CARD_ECC_DISABLED = (24), /*!< Command has been executed without using internal ECC */
Kojto 93:e188a91d3eaa 241 SD_ERASE_RESET = (25), /*!< Erase sequence was cleared before executing because an out of erase sequence command was received */
Kojto 93:e188a91d3eaa 242 SD_AKE_SEQ_ERROR = (26), /*!< Error in sequence of authentication. */
Kojto 93:e188a91d3eaa 243 SD_INVALID_VOLTRANGE = (27),
Kojto 93:e188a91d3eaa 244 SD_ADDR_OUT_OF_RANGE = (28),
Kojto 93:e188a91d3eaa 245 SD_SWITCH_ERROR = (29),
Kojto 93:e188a91d3eaa 246 SD_SDIO_DISABLED = (30),
Kojto 93:e188a91d3eaa 247 SD_SDIO_FUNCTION_BUSY = (31),
Kojto 93:e188a91d3eaa 248 SD_SDIO_FUNCTION_FAILED = (32),
Kojto 93:e188a91d3eaa 249 SD_SDIO_UNKNOWN_FUNCTION = (33),
Kojto 93:e188a91d3eaa 250
Kojto 93:e188a91d3eaa 251 /**
Kojto 93:e188a91d3eaa 252 * @brief Standard error defines
Kojto 93:e188a91d3eaa 253 */
Kojto 93:e188a91d3eaa 254 SD_INTERNAL_ERROR = (34),
Kojto 93:e188a91d3eaa 255 SD_NOT_CONFIGURED = (35),
Kojto 93:e188a91d3eaa 256 SD_REQUEST_PENDING = (36),
Kojto 93:e188a91d3eaa 257 SD_REQUEST_NOT_APPLICABLE = (37),
Kojto 93:e188a91d3eaa 258 SD_INVALID_PARAMETER = (38),
Kojto 93:e188a91d3eaa 259 SD_UNSUPPORTED_FEATURE = (39),
Kojto 93:e188a91d3eaa 260 SD_UNSUPPORTED_HW = (40),
Kojto 93:e188a91d3eaa 261 SD_ERROR = (41),
Kojto 93:e188a91d3eaa 262 SD_OK = (0)
Kojto 93:e188a91d3eaa 263
Kojto 93:e188a91d3eaa 264 }HAL_SD_ErrorTypedef;
Kojto 99:dbbf35b96557 265 /**
Kojto 99:dbbf35b96557 266 * @}
Kojto 99:dbbf35b96557 267 */
Kojto 93:e188a91d3eaa 268
Kojto 99:dbbf35b96557 269 /** @defgroup SD_Exported_Types_Group7 SD Transfer state enumeration structure
Kojto 99:dbbf35b96557 270 * @{
Kojto 99:dbbf35b96557 271 */
Kojto 93:e188a91d3eaa 272 typedef enum
Kojto 93:e188a91d3eaa 273 {
Kojto 93:e188a91d3eaa 274 SD_TRANSFER_OK = 0, /*!< Transfer success */
Kojto 93:e188a91d3eaa 275 SD_TRANSFER_BUSY = 1, /*!< Transfer is occurring */
Kojto 93:e188a91d3eaa 276 SD_TRANSFER_ERROR = 2 /*!< Transfer failed */
Kojto 93:e188a91d3eaa 277
Kojto 93:e188a91d3eaa 278 }HAL_SD_TransferStateTypedef;
Kojto 99:dbbf35b96557 279 /**
Kojto 99:dbbf35b96557 280 * @}
Kojto 99:dbbf35b96557 281 */
Kojto 93:e188a91d3eaa 282
Kojto 99:dbbf35b96557 283 /** @defgroup SD_Exported_Types_Group8 SD Card State enumeration structure
Kojto 99:dbbf35b96557 284 * @{
Kojto 99:dbbf35b96557 285 */
Kojto 93:e188a91d3eaa 286 typedef enum
Kojto 93:e188a91d3eaa 287 {
Kojto 93:e188a91d3eaa 288 SD_CARD_READY = ((uint32_t)0x00000001), /*!< Card state is ready */
Kojto 93:e188a91d3eaa 289 SD_CARD_IDENTIFICATION = ((uint32_t)0x00000002), /*!< Card is in identification state */
Kojto 93:e188a91d3eaa 290 SD_CARD_STANDBY = ((uint32_t)0x00000003), /*!< Card is in standby state */
Kojto 93:e188a91d3eaa 291 SD_CARD_TRANSFER = ((uint32_t)0x00000004), /*!< Card is in transfer state */
Kojto 93:e188a91d3eaa 292 SD_CARD_SENDING = ((uint32_t)0x00000005), /*!< Card is sending an operation */
Kojto 93:e188a91d3eaa 293 SD_CARD_RECEIVING = ((uint32_t)0x00000006), /*!< Card is receiving operation information */
Kojto 93:e188a91d3eaa 294 SD_CARD_PROGRAMMING = ((uint32_t)0x00000007), /*!< Card is in programming state */
Kojto 93:e188a91d3eaa 295 SD_CARD_DISCONNECTED = ((uint32_t)0x00000008), /*!< Card is disconnected */
Kojto 93:e188a91d3eaa 296 SD_CARD_ERROR = ((uint32_t)0x000000FF) /*!< Card is in error state */
Kojto 93:e188a91d3eaa 297
Kojto 93:e188a91d3eaa 298 }HAL_SD_CardStateTypedef;
Kojto 99:dbbf35b96557 299 /**
Kojto 99:dbbf35b96557 300 * @}
Kojto 99:dbbf35b96557 301 */
Kojto 93:e188a91d3eaa 302
Kojto 99:dbbf35b96557 303 /** @defgroup SD_Exported_Types_Group9 SD Operation enumeration structure
Kojto 99:dbbf35b96557 304 * @{
Kojto 99:dbbf35b96557 305 */
Kojto 93:e188a91d3eaa 306 typedef enum
Kojto 93:e188a91d3eaa 307 {
Kojto 93:e188a91d3eaa 308 SD_READ_SINGLE_BLOCK = 0, /*!< Read single block operation */
Kojto 93:e188a91d3eaa 309 SD_READ_MULTIPLE_BLOCK = 1, /*!< Read multiple blocks operation */
Kojto 93:e188a91d3eaa 310 SD_WRITE_SINGLE_BLOCK = 2, /*!< Write single block operation */
Kojto 93:e188a91d3eaa 311 SD_WRITE_MULTIPLE_BLOCK = 3 /*!< Write multiple blocks operation */
Kojto 93:e188a91d3eaa 312
Kojto 93:e188a91d3eaa 313 }HAL_SD_OperationTypedef;
Kojto 99:dbbf35b96557 314 /**
Kojto 99:dbbf35b96557 315 * @}
Kojto 99:dbbf35b96557 316 */
Kojto 93:e188a91d3eaa 317
Kojto 99:dbbf35b96557 318 /**
Kojto 99:dbbf35b96557 319 * @}
Kojto 99:dbbf35b96557 320 */
Kojto 93:e188a91d3eaa 321
Kojto 93:e188a91d3eaa 322 /* Exported constants --------------------------------------------------------*/
Kojto 99:dbbf35b96557 323 /** @defgroup SD_Exported_Constants SD Exported Constants
Kojto 93:e188a91d3eaa 324 * @{
Kojto 93:e188a91d3eaa 325 */
Kojto 93:e188a91d3eaa 326
Kojto 93:e188a91d3eaa 327 /**
Kojto 93:e188a91d3eaa 328 * @brief SD Commands Index
Kojto 93:e188a91d3eaa 329 */
Kojto 93:e188a91d3eaa 330 #define SD_CMD_GO_IDLE_STATE ((uint8_t)0) /*!< Resets the SD memory card. */
Kojto 93:e188a91d3eaa 331 #define SD_CMD_SEND_OP_COND ((uint8_t)1) /*!< Sends host capacity support information and activates the card's initialization process. */
Kojto 93:e188a91d3eaa 332 #define SD_CMD_ALL_SEND_CID ((uint8_t)2) /*!< Asks any card connected to the host to send the CID numbers on the CMD line. */
Kojto 93:e188a91d3eaa 333 #define SD_CMD_SET_REL_ADDR ((uint8_t)3) /*!< Asks the card to publish a new relative address (RCA). */
Kojto 93:e188a91d3eaa 334 #define SD_CMD_SET_DSR ((uint8_t)4) /*!< Programs the DSR of all cards. */
Kojto 93:e188a91d3eaa 335 #define SD_CMD_SDIO_SEN_OP_COND ((uint8_t)5) /*!< Sends host capacity support information (HCS) and asks the accessed card to send its
Kojto 93:e188a91d3eaa 336 operating condition register (OCR) content in the response on the CMD line. */
Kojto 93:e188a91d3eaa 337 #define SD_CMD_HS_SWITCH ((uint8_t)6) /*!< Checks switchable function (mode 0) and switch card function (mode 1). */
Kojto 93:e188a91d3eaa 338 #define SD_CMD_SEL_DESEL_CARD ((uint8_t)7) /*!< Selects the card by its own relative address and gets deselected by any other address */
Kojto 93:e188a91d3eaa 339 #define SD_CMD_HS_SEND_EXT_CSD ((uint8_t)8) /*!< Sends SD Memory Card interface condition, which includes host supply voltage information
Kojto 93:e188a91d3eaa 340 and asks the card whether card supports voltage. */
Kojto 93:e188a91d3eaa 341 #define SD_CMD_SEND_CSD ((uint8_t)9) /*!< Addressed card sends its card specific data (CSD) on the CMD line. */
Kojto 93:e188a91d3eaa 342 #define SD_CMD_SEND_CID ((uint8_t)10) /*!< Addressed card sends its card identification (CID) on the CMD line. */
Kojto 93:e188a91d3eaa 343 #define SD_CMD_READ_DAT_UNTIL_STOP ((uint8_t)11) /*!< SD card doesn't support it. */
Kojto 93:e188a91d3eaa 344 #define SD_CMD_STOP_TRANSMISSION ((uint8_t)12) /*!< Forces the card to stop transmission. */
Kojto 93:e188a91d3eaa 345 #define SD_CMD_SEND_STATUS ((uint8_t)13) /*!< Addressed card sends its status register. */
Kojto 93:e188a91d3eaa 346 #define SD_CMD_HS_BUSTEST_READ ((uint8_t)14)
Kojto 93:e188a91d3eaa 347 #define SD_CMD_GO_INACTIVE_STATE ((uint8_t)15) /*!< Sends an addressed card into the inactive state. */
Kojto 93:e188a91d3eaa 348 #define SD_CMD_SET_BLOCKLEN ((uint8_t)16) /*!< Sets the block length (in bytes for SDSC) for all following block commands
Kojto 93:e188a91d3eaa 349 (read, write, lock). Default block length is fixed to 512 Bytes. Not effective
Kojto 93:e188a91d3eaa 350 for SDHS and SDXC. */
Kojto 93:e188a91d3eaa 351 #define SD_CMD_READ_SINGLE_BLOCK ((uint8_t)17) /*!< Reads single block of size selected by SET_BLOCKLEN in case of SDSC, and a block of
Kojto 93:e188a91d3eaa 352 fixed 512 bytes in case of SDHC and SDXC. */
Kojto 93:e188a91d3eaa 353 #define SD_CMD_READ_MULT_BLOCK ((uint8_t)18) /*!< Continuously transfers data blocks from card to host until interrupted by
Kojto 93:e188a91d3eaa 354 STOP_TRANSMISSION command. */
Kojto 93:e188a91d3eaa 355 #define SD_CMD_HS_BUSTEST_WRITE ((uint8_t)19) /*!< 64 bytes tuning pattern is sent for SDR50 and SDR104. */
Kojto 93:e188a91d3eaa 356 #define SD_CMD_WRITE_DAT_UNTIL_STOP ((uint8_t)20) /*!< Speed class control command. */
Kojto 93:e188a91d3eaa 357 #define SD_CMD_SET_BLOCK_COUNT ((uint8_t)23) /*!< Specify block count for CMD18 and CMD25. */
Kojto 93:e188a91d3eaa 358 #define SD_CMD_WRITE_SINGLE_BLOCK ((uint8_t)24) /*!< Writes single block of size selected by SET_BLOCKLEN in case of SDSC, and a block of
Kojto 93:e188a91d3eaa 359 fixed 512 bytes in case of SDHC and SDXC. */
Kojto 93:e188a91d3eaa 360 #define SD_CMD_WRITE_MULT_BLOCK ((uint8_t)25) /*!< Continuously writes blocks of data until a STOP_TRANSMISSION follows. */
Kojto 93:e188a91d3eaa 361 #define SD_CMD_PROG_CID ((uint8_t)26) /*!< Reserved for manufacturers. */
Kojto 93:e188a91d3eaa 362 #define SD_CMD_PROG_CSD ((uint8_t)27) /*!< Programming of the programmable bits of the CSD. */
Kojto 93:e188a91d3eaa 363 #define SD_CMD_SET_WRITE_PROT ((uint8_t)28) /*!< Sets the write protection bit of the addressed group. */
Kojto 93:e188a91d3eaa 364 #define SD_CMD_CLR_WRITE_PROT ((uint8_t)29) /*!< Clears the write protection bit of the addressed group. */
Kojto 93:e188a91d3eaa 365 #define SD_CMD_SEND_WRITE_PROT ((uint8_t)30) /*!< Asks the card to send the status of the write protection bits. */
Kojto 93:e188a91d3eaa 366 #define SD_CMD_SD_ERASE_GRP_START ((uint8_t)32) /*!< Sets the address of the first write block to be erased. (For SD card only). */
Kojto 93:e188a91d3eaa 367 #define SD_CMD_SD_ERASE_GRP_END ((uint8_t)33) /*!< Sets the address of the last write block of the continuous range to be erased. */
Kojto 93:e188a91d3eaa 368 #define SD_CMD_ERASE_GRP_START ((uint8_t)35) /*!< Sets the address of the first write block to be erased. Reserved for each command
Kojto 93:e188a91d3eaa 369 system set by switch function command (CMD6). */
Kojto 93:e188a91d3eaa 370 #define SD_CMD_ERASE_GRP_END ((uint8_t)36) /*!< Sets the address of the last write block of the continuous range to be erased.
Kojto 93:e188a91d3eaa 371 Reserved for each command system set by switch function command (CMD6). */
Kojto 93:e188a91d3eaa 372 #define SD_CMD_ERASE ((uint8_t)38) /*!< Reserved for SD security applications. */
Kojto 93:e188a91d3eaa 373 #define SD_CMD_FAST_IO ((uint8_t)39) /*!< SD card doesn't support it (Reserved). */
Kojto 93:e188a91d3eaa 374 #define SD_CMD_GO_IRQ_STATE ((uint8_t)40) /*!< SD card doesn't support it (Reserved). */
Kojto 93:e188a91d3eaa 375 #define SD_CMD_LOCK_UNLOCK ((uint8_t)42) /*!< Sets/resets the password or lock/unlock the card. The size of the data block is set by
Kojto 93:e188a91d3eaa 376 the SET_BLOCK_LEN command. */
Kojto 93:e188a91d3eaa 377 #define SD_CMD_APP_CMD ((uint8_t)55) /*!< Indicates to the card that the next command is an application specific command rather
Kojto 93:e188a91d3eaa 378 than a standard command. */
Kojto 93:e188a91d3eaa 379 #define SD_CMD_GEN_CMD ((uint8_t)56) /*!< Used either to transfer a data block to the card or to get a data block from the card
Kojto 93:e188a91d3eaa 380 for general purpose/application specific commands. */
Kojto 93:e188a91d3eaa 381 #define SD_CMD_NO_CMD ((uint8_t)64)
Kojto 93:e188a91d3eaa 382
Kojto 93:e188a91d3eaa 383 /**
Kojto 93:e188a91d3eaa 384 * @brief Following commands are SD Card Specific commands.
Kojto 93:e188a91d3eaa 385 * SDIO_APP_CMD should be sent before sending these commands.
Kojto 93:e188a91d3eaa 386 */
Kojto 93:e188a91d3eaa 387 #define SD_CMD_APP_SD_SET_BUSWIDTH ((uint8_t)6) /*!< (ACMD6) Defines the data bus width to be used for data transfer. The allowed data bus
Kojto 93:e188a91d3eaa 388 widths are given in SCR register. */
Kojto 99:dbbf35b96557 389 #define SD_CMD_SD_APP_STATUS ((uint8_t)13) /*!< (ACMD13) Sends the SD status. */
Kojto 93:e188a91d3eaa 390 #define SD_CMD_SD_APP_SEND_NUM_WRITE_BLOCKS ((uint8_t)22) /*!< (ACMD22) Sends the number of the written (without errors) write blocks. Responds with
Kojto 93:e188a91d3eaa 391 32bit+CRC data block. */
Kojto 93:e188a91d3eaa 392 #define SD_CMD_SD_APP_OP_COND ((uint8_t)41) /*!< (ACMD41) Sends host capacity support information (HCS) and asks the accessed card to
Kojto 93:e188a91d3eaa 393 send its operating condition register (OCR) content in the response on the CMD line. */
Kojto 93:e188a91d3eaa 394 #define SD_CMD_SD_APP_SET_CLR_CARD_DETECT ((uint8_t)42) /*!< (ACMD42) Connects/Disconnects the 50 KOhm pull-up resistor on CD/DAT3 (pin 1) of the card. */
Kojto 93:e188a91d3eaa 395 #define SD_CMD_SD_APP_SEND_SCR ((uint8_t)51) /*!< Reads the SD Configuration Register (SCR). */
Kojto 93:e188a91d3eaa 396 #define SD_CMD_SDIO_RW_DIRECT ((uint8_t)52) /*!< For SD I/O card only, reserved for security specification. */
Kojto 93:e188a91d3eaa 397 #define SD_CMD_SDIO_RW_EXTENDED ((uint8_t)53) /*!< For SD I/O card only, reserved for security specification. */
Kojto 93:e188a91d3eaa 398
Kojto 93:e188a91d3eaa 399 /**
Kojto 93:e188a91d3eaa 400 * @brief Following commands are SD Card Specific security commands.
Kojto 93:e188a91d3eaa 401 * SD_CMD_APP_CMD should be sent before sending these commands.
Kojto 93:e188a91d3eaa 402 */
Kojto 93:e188a91d3eaa 403 #define SD_CMD_SD_APP_GET_MKB ((uint8_t)43) /*!< For SD card only */
Kojto 93:e188a91d3eaa 404 #define SD_CMD_SD_APP_GET_MID ((uint8_t)44) /*!< For SD card only */
Kojto 93:e188a91d3eaa 405 #define SD_CMD_SD_APP_SET_CER_RN1 ((uint8_t)45) /*!< For SD card only */
Kojto 93:e188a91d3eaa 406 #define SD_CMD_SD_APP_GET_CER_RN2 ((uint8_t)46) /*!< For SD card only */
Kojto 93:e188a91d3eaa 407 #define SD_CMD_SD_APP_SET_CER_RES2 ((uint8_t)47) /*!< For SD card only */
Kojto 93:e188a91d3eaa 408 #define SD_CMD_SD_APP_GET_CER_RES1 ((uint8_t)48) /*!< For SD card only */
Kojto 93:e188a91d3eaa 409 #define SD_CMD_SD_APP_SECURE_READ_MULTIPLE_BLOCK ((uint8_t)18) /*!< For SD card only */
Kojto 93:e188a91d3eaa 410 #define SD_CMD_SD_APP_SECURE_WRITE_MULTIPLE_BLOCK ((uint8_t)25) /*!< For SD card only */
Kojto 93:e188a91d3eaa 411 #define SD_CMD_SD_APP_SECURE_ERASE ((uint8_t)38) /*!< For SD card only */
Kojto 93:e188a91d3eaa 412 #define SD_CMD_SD_APP_CHANGE_SECURE_AREA ((uint8_t)49) /*!< For SD card only */
Kojto 93:e188a91d3eaa 413 #define SD_CMD_SD_APP_SECURE_WRITE_MKB ((uint8_t)48) /*!< For SD card only */
Kojto 93:e188a91d3eaa 414
Kojto 93:e188a91d3eaa 415 /**
Kojto 93:e188a91d3eaa 416 * @brief Supported SD Memory Cards
Kojto 93:e188a91d3eaa 417 */
Kojto 93:e188a91d3eaa 418 #define STD_CAPACITY_SD_CARD_V1_1 ((uint32_t)0x00000000)
Kojto 93:e188a91d3eaa 419 #define STD_CAPACITY_SD_CARD_V2_0 ((uint32_t)0x00000001)
Kojto 93:e188a91d3eaa 420 #define HIGH_CAPACITY_SD_CARD ((uint32_t)0x00000002)
Kojto 93:e188a91d3eaa 421 #define MULTIMEDIA_CARD ((uint32_t)0x00000003)
Kojto 93:e188a91d3eaa 422 #define SECURE_DIGITAL_IO_CARD ((uint32_t)0x00000004)
Kojto 93:e188a91d3eaa 423 #define HIGH_SPEED_MULTIMEDIA_CARD ((uint32_t)0x00000005)
Kojto 93:e188a91d3eaa 424 #define SECURE_DIGITAL_IO_COMBO_CARD ((uint32_t)0x00000006)
Kojto 93:e188a91d3eaa 425 #define HIGH_CAPACITY_MMC_CARD ((uint32_t)0x00000007)
Kojto 93:e188a91d3eaa 426 /**
Kojto 93:e188a91d3eaa 427 * @}
Kojto 93:e188a91d3eaa 428 */
Kojto 93:e188a91d3eaa 429
Kojto 93:e188a91d3eaa 430 /* Exported macro ------------------------------------------------------------*/
Kojto 99:dbbf35b96557 431 /** @defgroup SD_Exported_macros SD Exported Macros
Kojto 99:dbbf35b96557 432 * @brief macros to handle interrupts and specific clock configurations
Kojto 99:dbbf35b96557 433 * @{
Kojto 99:dbbf35b96557 434 */
Kojto 93:e188a91d3eaa 435
Kojto 93:e188a91d3eaa 436 /**
Kojto 93:e188a91d3eaa 437 * @brief Enable the SD device.
Kojto 93:e188a91d3eaa 438 * @retval None
Kojto 93:e188a91d3eaa 439 */
Kojto 93:e188a91d3eaa 440 #define __HAL_SD_SDIO_ENABLE() __SDIO_ENABLE()
Kojto 93:e188a91d3eaa 441
Kojto 93:e188a91d3eaa 442 /**
Kojto 93:e188a91d3eaa 443 * @brief Disable the SD device.
Kojto 93:e188a91d3eaa 444 * @retval None
Kojto 93:e188a91d3eaa 445 */
Kojto 93:e188a91d3eaa 446 #define __HAL_SD_SDIO_DISABLE() __SDIO_DISABLE()
Kojto 93:e188a91d3eaa 447
Kojto 93:e188a91d3eaa 448 /**
Kojto 93:e188a91d3eaa 449 * @brief Enable the SDIO DMA transfer.
Kojto 93:e188a91d3eaa 450 * @retval None
Kojto 93:e188a91d3eaa 451 */
Kojto 93:e188a91d3eaa 452 #define __HAL_SD_SDIO_DMA_ENABLE() __SDIO_DMA_ENABLE()
Kojto 93:e188a91d3eaa 453
Kojto 93:e188a91d3eaa 454 /**
Kojto 93:e188a91d3eaa 455 * @brief Disable the SDIO DMA transfer.
Kojto 93:e188a91d3eaa 456 * @retval None
Kojto 93:e188a91d3eaa 457 */
Kojto 93:e188a91d3eaa 458 #define __HAL_SD_SDIO_DMA_DISABLE() __SDIO_DMA_DISABLE()
Kojto 93:e188a91d3eaa 459
Kojto 93:e188a91d3eaa 460 /**
Kojto 93:e188a91d3eaa 461 * @brief Enable the SD device interrupt.
Kojto 93:e188a91d3eaa 462 * @param __HANDLE__: SD Handle
Kojto 93:e188a91d3eaa 463 * @param __INTERRUPT__: specifies the SDIO interrupt sources to be enabled.
Kojto 93:e188a91d3eaa 464 * This parameter can be one or a combination of the following values:
Kojto 93:e188a91d3eaa 465 * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
Kojto 93:e188a91d3eaa 466 * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
Kojto 93:e188a91d3eaa 467 * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
Kojto 93:e188a91d3eaa 468 * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
Kojto 93:e188a91d3eaa 469 * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
Kojto 93:e188a91d3eaa 470 * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
Kojto 93:e188a91d3eaa 471 * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
Kojto 93:e188a91d3eaa 472 * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
Kojto 93:e188a91d3eaa 473 * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt
Kojto 93:e188a91d3eaa 474 * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide
Kojto 93:e188a91d3eaa 475 * bus mode interrupt
Kojto 93:e188a91d3eaa 476 * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt
Kojto 93:e188a91d3eaa 477 * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt
Kojto 93:e188a91d3eaa 478 * @arg SDIO_IT_TXACT: Data transmit in progress interrupt
Kojto 93:e188a91d3eaa 479 * @arg SDIO_IT_RXACT: Data receive in progress interrupt
Kojto 93:e188a91d3eaa 480 * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
Kojto 93:e188a91d3eaa 481 * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
Kojto 93:e188a91d3eaa 482 * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt
Kojto 93:e188a91d3eaa 483 * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt
Kojto 93:e188a91d3eaa 484 * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt
Kojto 93:e188a91d3eaa 485 * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt
Kojto 93:e188a91d3eaa 486 * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt
Kojto 93:e188a91d3eaa 487 * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt
Kojto 93:e188a91d3eaa 488 * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt
Kojto 93:e188a91d3eaa 489 * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt
Kojto 93:e188a91d3eaa 490 * @retval None
Kojto 93:e188a91d3eaa 491 */
Kojto 93:e188a91d3eaa 492 #define __HAL_SD_SDIO_ENABLE_IT(__HANDLE__, __INTERRUPT__) __SDIO_ENABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__))
Kojto 93:e188a91d3eaa 493
Kojto 93:e188a91d3eaa 494 /**
Kojto 93:e188a91d3eaa 495 * @brief Disable the SD device interrupt.
Kojto 93:e188a91d3eaa 496 * @param __HANDLE__: SD Handle
Kojto 93:e188a91d3eaa 497 * @param __INTERRUPT__: specifies the SDIO interrupt sources to be disabled.
Kojto 93:e188a91d3eaa 498 * This parameter can be one or a combination of the following values:
Kojto 93:e188a91d3eaa 499 * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
Kojto 93:e188a91d3eaa 500 * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
Kojto 93:e188a91d3eaa 501 * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
Kojto 93:e188a91d3eaa 502 * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
Kojto 93:e188a91d3eaa 503 * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
Kojto 93:e188a91d3eaa 504 * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
Kojto 93:e188a91d3eaa 505 * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
Kojto 93:e188a91d3eaa 506 * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
Kojto 93:e188a91d3eaa 507 * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt
Kojto 93:e188a91d3eaa 508 * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide
Kojto 93:e188a91d3eaa 509 * bus mode interrupt
Kojto 93:e188a91d3eaa 510 * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt
Kojto 93:e188a91d3eaa 511 * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt
Kojto 93:e188a91d3eaa 512 * @arg SDIO_IT_TXACT: Data transmit in progress interrupt
Kojto 93:e188a91d3eaa 513 * @arg SDIO_IT_RXACT: Data receive in progress interrupt
Kojto 93:e188a91d3eaa 514 * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
Kojto 93:e188a91d3eaa 515 * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
Kojto 93:e188a91d3eaa 516 * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt
Kojto 93:e188a91d3eaa 517 * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt
Kojto 93:e188a91d3eaa 518 * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt
Kojto 93:e188a91d3eaa 519 * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt
Kojto 93:e188a91d3eaa 520 * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt
Kojto 93:e188a91d3eaa 521 * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt
Kojto 93:e188a91d3eaa 522 * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt
Kojto 93:e188a91d3eaa 523 * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt
Kojto 93:e188a91d3eaa 524 * @retval None
Kojto 93:e188a91d3eaa 525 */
Kojto 93:e188a91d3eaa 526 #define __HAL_SD_SDIO_DISABLE_IT(__HANDLE__, __INTERRUPT__) __SDIO_DISABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__))
Kojto 93:e188a91d3eaa 527
Kojto 93:e188a91d3eaa 528 /**
Kojto 93:e188a91d3eaa 529 * @brief Check whether the specified SD flag is set or not.
Kojto 93:e188a91d3eaa 530 * @param __HANDLE__: SD Handle
Kojto 93:e188a91d3eaa 531 * @param __FLAG__: specifies the flag to check.
Kojto 93:e188a91d3eaa 532 * This parameter can be one of the following values:
Kojto 93:e188a91d3eaa 533 * @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed)
Kojto 93:e188a91d3eaa 534 * @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed)
Kojto 93:e188a91d3eaa 535 * @arg SDIO_FLAG_CTIMEOUT: Command response timeout
Kojto 93:e188a91d3eaa 536 * @arg SDIO_FLAG_DTIMEOUT: Data timeout
Kojto 93:e188a91d3eaa 537 * @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error
Kojto 93:e188a91d3eaa 538 * @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error
Kojto 93:e188a91d3eaa 539 * @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed)
Kojto 93:e188a91d3eaa 540 * @arg SDIO_FLAG_CMDSENT: Command sent (no response required)
Kojto 93:e188a91d3eaa 541 * @arg SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero)
Kojto 93:e188a91d3eaa 542 * @arg SDIO_FLAG_STBITERR: Start bit not detected on all data signals in wide bus mode.
Kojto 93:e188a91d3eaa 543 * @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed)
Kojto 93:e188a91d3eaa 544 * @arg SDIO_FLAG_CMDACT: Command transfer in progress
Kojto 93:e188a91d3eaa 545 * @arg SDIO_FLAG_TXACT: Data transmit in progress
Kojto 93:e188a91d3eaa 546 * @arg SDIO_FLAG_RXACT: Data receive in progress
Kojto 93:e188a91d3eaa 547 * @arg SDIO_FLAG_TXFIFOHE: Transmit FIFO Half Empty
Kojto 93:e188a91d3eaa 548 * @arg SDIO_FLAG_RXFIFOHF: Receive FIFO Half Full
Kojto 93:e188a91d3eaa 549 * @arg SDIO_FLAG_TXFIFOF: Transmit FIFO full
Kojto 93:e188a91d3eaa 550 * @arg SDIO_FLAG_RXFIFOF: Receive FIFO full
Kojto 93:e188a91d3eaa 551 * @arg SDIO_FLAG_TXFIFOE: Transmit FIFO empty
Kojto 93:e188a91d3eaa 552 * @arg SDIO_FLAG_RXFIFOE: Receive FIFO empty
Kojto 93:e188a91d3eaa 553 * @arg SDIO_FLAG_TXDAVL: Data available in transmit FIFO
Kojto 93:e188a91d3eaa 554 * @arg SDIO_FLAG_RXDAVL: Data available in receive FIFO
Kojto 93:e188a91d3eaa 555 * @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received
Kojto 93:e188a91d3eaa 556 * @arg SDIO_FLAG_CEATAEND: CE-ATA command completion signal received for CMD61
Kojto 93:e188a91d3eaa 557 * @retval The new state of SD FLAG (SET or RESET).
Kojto 93:e188a91d3eaa 558 */
Kojto 93:e188a91d3eaa 559 #define __HAL_SD_SDIO_GET_FLAG(__HANDLE__, __FLAG__) __SDIO_GET_FLAG((__HANDLE__)->Instance, (__FLAG__))
Kojto 93:e188a91d3eaa 560
Kojto 93:e188a91d3eaa 561 /**
Kojto 93:e188a91d3eaa 562 * @brief Clear the SD's pending flags.
Kojto 93:e188a91d3eaa 563 * @param __HANDLE__: SD Handle
Kojto 93:e188a91d3eaa 564 * @param __FLAG__: specifies the flag to clear.
Kojto 93:e188a91d3eaa 565 * This parameter can be one or a combination of the following values:
Kojto 93:e188a91d3eaa 566 * @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed)
Kojto 93:e188a91d3eaa 567 * @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed)
Kojto 93:e188a91d3eaa 568 * @arg SDIO_FLAG_CTIMEOUT: Command response timeout
Kojto 93:e188a91d3eaa 569 * @arg SDIO_FLAG_DTIMEOUT: Data timeout
Kojto 93:e188a91d3eaa 570 * @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error
Kojto 93:e188a91d3eaa 571 * @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error
Kojto 93:e188a91d3eaa 572 * @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed)
Kojto 93:e188a91d3eaa 573 * @arg SDIO_FLAG_CMDSENT: Command sent (no response required)
Kojto 93:e188a91d3eaa 574 * @arg SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero)
Kojto 93:e188a91d3eaa 575 * @arg SDIO_FLAG_STBITERR: Start bit not detected on all data signals in wide bus mode
Kojto 93:e188a91d3eaa 576 * @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed)
Kojto 93:e188a91d3eaa 577 * @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received
Kojto 93:e188a91d3eaa 578 * @arg SDIO_FLAG_CEATAEND: CE-ATA command completion signal received for CMD61
Kojto 93:e188a91d3eaa 579 * @retval None
Kojto 93:e188a91d3eaa 580 */
Kojto 93:e188a91d3eaa 581 #define __HAL_SD_SDIO_CLEAR_FLAG(__HANDLE__, __FLAG__) __SDIO_CLEAR_FLAG((__HANDLE__)->Instance, (__FLAG__))
Kojto 93:e188a91d3eaa 582
Kojto 93:e188a91d3eaa 583 /**
Kojto 93:e188a91d3eaa 584 * @brief Check whether the specified SD interrupt has occurred or not.
Kojto 93:e188a91d3eaa 585 * @param __HANDLE__: SD Handle
Kojto 93:e188a91d3eaa 586 * @param __INTERRUPT__: specifies the SDIO interrupt source to check.
Kojto 93:e188a91d3eaa 587 * This parameter can be one of the following values:
Kojto 93:e188a91d3eaa 588 * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
Kojto 93:e188a91d3eaa 589 * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
Kojto 93:e188a91d3eaa 590 * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
Kojto 93:e188a91d3eaa 591 * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
Kojto 93:e188a91d3eaa 592 * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
Kojto 93:e188a91d3eaa 593 * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
Kojto 93:e188a91d3eaa 594 * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
Kojto 93:e188a91d3eaa 595 * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
Kojto 93:e188a91d3eaa 596 * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt
Kojto 93:e188a91d3eaa 597 * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide
Kojto 93:e188a91d3eaa 598 * bus mode interrupt
Kojto 93:e188a91d3eaa 599 * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt
Kojto 93:e188a91d3eaa 600 * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt
Kojto 93:e188a91d3eaa 601 * @arg SDIO_IT_TXACT: Data transmit in progress interrupt
Kojto 93:e188a91d3eaa 602 * @arg SDIO_IT_RXACT: Data receive in progress interrupt
Kojto 93:e188a91d3eaa 603 * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
Kojto 93:e188a91d3eaa 604 * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
Kojto 93:e188a91d3eaa 605 * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt
Kojto 93:e188a91d3eaa 606 * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt
Kojto 93:e188a91d3eaa 607 * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt
Kojto 93:e188a91d3eaa 608 * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt
Kojto 93:e188a91d3eaa 609 * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt
Kojto 93:e188a91d3eaa 610 * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt
Kojto 93:e188a91d3eaa 611 * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt
Kojto 93:e188a91d3eaa 612 * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt
Kojto 93:e188a91d3eaa 613 * @retval The new state of SD IT (SET or RESET).
Kojto 93:e188a91d3eaa 614 */
Kojto 93:e188a91d3eaa 615 #define __HAL_SD_SDIO_GET_IT (__HANDLE__, __INTERRUPT__) __SDIO_GET_IT ((__HANDLE__)->Instance, __INTERRUPT__)
Kojto 93:e188a91d3eaa 616
Kojto 93:e188a91d3eaa 617 /**
Kojto 93:e188a91d3eaa 618 * @brief Clear the SD's interrupt pending bits.
Kojto 93:e188a91d3eaa 619 * @param __HANDLE__ : SD Handle
Kojto 93:e188a91d3eaa 620 * @param __INTERRUPT__: specifies the interrupt pending bit to clear.
Kojto 93:e188a91d3eaa 621 * This parameter can be one or a combination of the following values:
Kojto 93:e188a91d3eaa 622 * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
Kojto 93:e188a91d3eaa 623 * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
Kojto 93:e188a91d3eaa 624 * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
Kojto 93:e188a91d3eaa 625 * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
Kojto 93:e188a91d3eaa 626 * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
Kojto 93:e188a91d3eaa 627 * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
Kojto 93:e188a91d3eaa 628 * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
Kojto 93:e188a91d3eaa 629 * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
Kojto 93:e188a91d3eaa 630 * @arg SDIO_IT_DATAEND: Data end (data counter, SDIO_DCOUNT, is zero) interrupt
Kojto 93:e188a91d3eaa 631 * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide
Kojto 93:e188a91d3eaa 632 * bus mode interrupt
Kojto 93:e188a91d3eaa 633 * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt
Kojto 93:e188a91d3eaa 634 * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61
Kojto 93:e188a91d3eaa 635 * @retval None
Kojto 93:e188a91d3eaa 636 */
Kojto 93:e188a91d3eaa 637 #define __HAL_SD_SDIO_CLEAR_IT(__HANDLE__, __INTERRUPT__) __SDIO_CLEAR_IT((__HANDLE__)->Instance, (__INTERRUPT__))
Kojto 93:e188a91d3eaa 638 /**
Kojto 93:e188a91d3eaa 639 * @}
Kojto 93:e188a91d3eaa 640 */
Kojto 93:e188a91d3eaa 641
Kojto 93:e188a91d3eaa 642 /* Exported functions --------------------------------------------------------*/
Kojto 99:dbbf35b96557 643 /** @defgroup SD_Exported_Functions SD Exported Functions
Kojto 93:e188a91d3eaa 644 * @{
Kojto 93:e188a91d3eaa 645 */
Kojto 99:dbbf35b96557 646
Kojto 99:dbbf35b96557 647 /** @defgroup SD_Exported_Functions_Group1 Initialization and de-initialization functions
Kojto 93:e188a91d3eaa 648 * @{
Kojto 93:e188a91d3eaa 649 */
Kojto 93:e188a91d3eaa 650 HAL_SD_ErrorTypedef HAL_SD_Init(SD_HandleTypeDef *hsd, HAL_SD_CardInfoTypedef *SDCardInfo);
Kojto 93:e188a91d3eaa 651 HAL_StatusTypeDef HAL_SD_DeInit (SD_HandleTypeDef *hsd);
Kojto 93:e188a91d3eaa 652 void HAL_SD_MspInit(SD_HandleTypeDef *hsd);
Kojto 93:e188a91d3eaa 653 void HAL_SD_MspDeInit(SD_HandleTypeDef *hsd);
Kojto 93:e188a91d3eaa 654 /**
Kojto 93:e188a91d3eaa 655 * @}
Kojto 93:e188a91d3eaa 656 */
Kojto 99:dbbf35b96557 657
Kojto 99:dbbf35b96557 658 /** @defgroup SD_Exported_Functions_Group2 I/O operation functions
Kojto 93:e188a91d3eaa 659 * @{
Kojto 93:e188a91d3eaa 660 */
Kojto 93:e188a91d3eaa 661 /* Blocking mode: Polling */
Kojto 93:e188a91d3eaa 662 HAL_SD_ErrorTypedef HAL_SD_ReadBlocks(SD_HandleTypeDef *hsd, uint32_t *pReadBuffer, uint64_t ReadAddr, uint32_t BlockSize, uint32_t NumberOfBlocks);
Kojto 93:e188a91d3eaa 663 HAL_SD_ErrorTypedef HAL_SD_WriteBlocks(SD_HandleTypeDef *hsd, uint32_t *pWriteBuffer, uint64_t WriteAddr, uint32_t BlockSize, uint32_t NumberOfBlocks);
Kojto 93:e188a91d3eaa 664 HAL_SD_ErrorTypedef HAL_SD_Erase(SD_HandleTypeDef *hsd, uint64_t startaddr, uint64_t endaddr);
Kojto 93:e188a91d3eaa 665
Kojto 93:e188a91d3eaa 666 /* Non-Blocking mode: Interrupt */
Kojto 93:e188a91d3eaa 667 void HAL_SD_IRQHandler(SD_HandleTypeDef *hsd);
Kojto 93:e188a91d3eaa 668
Kojto 93:e188a91d3eaa 669 /* Callback in non blocking modes (DMA) */
Kojto 93:e188a91d3eaa 670 void HAL_SD_DMA_RxCpltCallback(DMA_HandleTypeDef *hdma);
Kojto 93:e188a91d3eaa 671 void HAL_SD_DMA_RxErrorCallback(DMA_HandleTypeDef *hdma);
Kojto 93:e188a91d3eaa 672 void HAL_SD_DMA_TxCpltCallback(DMA_HandleTypeDef *hdma);
Kojto 93:e188a91d3eaa 673 void HAL_SD_DMA_TxErrorCallback(DMA_HandleTypeDef *hdma);
Kojto 93:e188a91d3eaa 674 void HAL_SD_XferCpltCallback(SD_HandleTypeDef *hsd);
Kojto 93:e188a91d3eaa 675 void HAL_SD_XferErrorCallback(SD_HandleTypeDef *hsd);
Kojto 93:e188a91d3eaa 676
Kojto 93:e188a91d3eaa 677 /* Non-Blocking mode: DMA */
Kojto 93:e188a91d3eaa 678 HAL_SD_ErrorTypedef HAL_SD_ReadBlocks_DMA(SD_HandleTypeDef *hsd, uint32_t *pReadBuffer, uint64_t ReadAddr, uint32_t BlockSize, uint32_t NumberOfBlocks);
Kojto 93:e188a91d3eaa 679 HAL_SD_ErrorTypedef HAL_SD_WriteBlocks_DMA(SD_HandleTypeDef *hsd, uint32_t *pWriteBuffer, uint64_t WriteAddr, uint32_t BlockSize, uint32_t NumberOfBlocks);
Kojto 93:e188a91d3eaa 680 HAL_SD_ErrorTypedef HAL_SD_CheckWriteOperation(SD_HandleTypeDef *hsd, uint32_t Timeout);
Kojto 93:e188a91d3eaa 681 HAL_SD_ErrorTypedef HAL_SD_CheckReadOperation(SD_HandleTypeDef *hsd, uint32_t Timeout);
Kojto 93:e188a91d3eaa 682 /**
Kojto 93:e188a91d3eaa 683 * @}
Kojto 93:e188a91d3eaa 684 */
Kojto 99:dbbf35b96557 685
Kojto 99:dbbf35b96557 686 /** @defgroup SD_Exported_Functions_Group3 Peripheral Control functions
Kojto 93:e188a91d3eaa 687 * @{
Kojto 93:e188a91d3eaa 688 */
Kojto 93:e188a91d3eaa 689 HAL_SD_ErrorTypedef HAL_SD_Get_CardInfo(SD_HandleTypeDef *hsd, HAL_SD_CardInfoTypedef *pCardInfo);
Kojto 93:e188a91d3eaa 690 HAL_SD_ErrorTypedef HAL_SD_WideBusOperation_Config(SD_HandleTypeDef *hsd, uint32_t WideMode);
Kojto 93:e188a91d3eaa 691 HAL_SD_ErrorTypedef HAL_SD_StopTransfer(SD_HandleTypeDef *hsd);
Kojto 93:e188a91d3eaa 692 HAL_SD_ErrorTypedef HAL_SD_HighSpeed (SD_HandleTypeDef *hsd);
Kojto 93:e188a91d3eaa 693 /**
Kojto 93:e188a91d3eaa 694 * @}
Kojto 93:e188a91d3eaa 695 */
Kojto 93:e188a91d3eaa 696
Kojto 93:e188a91d3eaa 697 /* Peripheral State functions ************************************************/
Kojto 99:dbbf35b96557 698 /** @defgroup SD_Exported_Functions_Group4 Peripheral State functions
Kojto 93:e188a91d3eaa 699 * @{
Kojto 93:e188a91d3eaa 700 */
Kojto 93:e188a91d3eaa 701 HAL_SD_ErrorTypedef HAL_SD_SendSDStatus(SD_HandleTypeDef *hsd, uint32_t *pSDstatus);
Kojto 93:e188a91d3eaa 702 HAL_SD_ErrorTypedef HAL_SD_GetCardStatus(SD_HandleTypeDef *hsd, HAL_SD_CardStatusTypedef *pCardStatus);
Kojto 93:e188a91d3eaa 703 HAL_SD_TransferStateTypedef HAL_SD_GetStatus(SD_HandleTypeDef *hsd);
Kojto 93:e188a91d3eaa 704 /**
Kojto 93:e188a91d3eaa 705 * @}
Kojto 93:e188a91d3eaa 706 */
Kojto 93:e188a91d3eaa 707
Kojto 93:e188a91d3eaa 708 /**
Kojto 93:e188a91d3eaa 709 * @}
Kojto 93:e188a91d3eaa 710 */
Kojto 93:e188a91d3eaa 711
Kojto 99:dbbf35b96557 712 /* Private types -------------------------------------------------------------*/
Kojto 99:dbbf35b96557 713 /** @defgroup SD_Private_Types SD Private Types
Kojto 99:dbbf35b96557 714 * @{
Kojto 99:dbbf35b96557 715 */
Kojto 99:dbbf35b96557 716
Kojto 99:dbbf35b96557 717 /**
Kojto 99:dbbf35b96557 718 * @}
Kojto 99:dbbf35b96557 719 */
Kojto 99:dbbf35b96557 720
Kojto 99:dbbf35b96557 721 /* Private defines -----------------------------------------------------------*/
Kojto 99:dbbf35b96557 722 /** @defgroup SD_Private_Defines SD Private Defines
Kojto 99:dbbf35b96557 723 * @{
Kojto 99:dbbf35b96557 724 */
Kojto 99:dbbf35b96557 725
Kojto 99:dbbf35b96557 726 /**
Kojto 99:dbbf35b96557 727 * @}
Kojto 99:dbbf35b96557 728 */
Kojto 99:dbbf35b96557 729
Kojto 99:dbbf35b96557 730 /* Private variables ---------------------------------------------------------*/
Kojto 99:dbbf35b96557 731 /** @defgroup SD_Private_Variables SD Private Variables
Kojto 99:dbbf35b96557 732 * @{
Kojto 99:dbbf35b96557 733 */
Kojto 99:dbbf35b96557 734
Kojto 99:dbbf35b96557 735 /**
Kojto 99:dbbf35b96557 736 * @}
Kojto 99:dbbf35b96557 737 */
Kojto 99:dbbf35b96557 738
Kojto 99:dbbf35b96557 739 /* Private constants ---------------------------------------------------------*/
Kojto 99:dbbf35b96557 740 /** @defgroup SD_Private_Constants SD Private Constants
Kojto 99:dbbf35b96557 741 * @{
Kojto 99:dbbf35b96557 742 */
Kojto 99:dbbf35b96557 743
Kojto 99:dbbf35b96557 744 /**
Kojto 99:dbbf35b96557 745 * @}
Kojto 99:dbbf35b96557 746 */
Kojto 99:dbbf35b96557 747
Kojto 99:dbbf35b96557 748 /* Private macros ------------------------------------------------------------*/
Kojto 99:dbbf35b96557 749 /** @defgroup SD_Private_Macros SD Private Macros
Kojto 99:dbbf35b96557 750 * @{
Kojto 99:dbbf35b96557 751 */
Kojto 99:dbbf35b96557 752
Kojto 99:dbbf35b96557 753 /**
Kojto 99:dbbf35b96557 754 * @}
Kojto 99:dbbf35b96557 755 */
Kojto 99:dbbf35b96557 756
Kojto 99:dbbf35b96557 757 /* Private functions prototypes ----------------------------------------------*/
Kojto 99:dbbf35b96557 758 /** @defgroup SD_Private_Functions_Prototypes SD Private Functions Prototypes
Kojto 99:dbbf35b96557 759 * @{
Kojto 99:dbbf35b96557 760 */
Kojto 99:dbbf35b96557 761
Kojto 99:dbbf35b96557 762 /**
Kojto 99:dbbf35b96557 763 * @}
Kojto 99:dbbf35b96557 764 */
Kojto 99:dbbf35b96557 765
Kojto 99:dbbf35b96557 766 /* Private functions ---------------------------------------------------------*/
Kojto 99:dbbf35b96557 767 /** @defgroup SD_Private_Functions SD Private Functions
Kojto 99:dbbf35b96557 768 * @{
Kojto 99:dbbf35b96557 769 */
Kojto 99:dbbf35b96557 770
Kojto 99:dbbf35b96557 771 /**
Kojto 99:dbbf35b96557 772 * @}
Kojto 99:dbbf35b96557 773 */
Kojto 99:dbbf35b96557 774
Kojto 93:e188a91d3eaa 775 /**
Kojto 93:e188a91d3eaa 776 * @}
Kojto 93:e188a91d3eaa 777 */
Kojto 93:e188a91d3eaa 778
Kojto 93:e188a91d3eaa 779 /**
Kojto 93:e188a91d3eaa 780 * @}
Kojto 99:dbbf35b96557 781 */
Kojto 93:e188a91d3eaa 782
Kojto 93:e188a91d3eaa 783 #ifdef __cplusplus
Kojto 93:e188a91d3eaa 784 }
Kojto 93:e188a91d3eaa 785 #endif
Kojto 93:e188a91d3eaa 786
Kojto 99:dbbf35b96557 787 #endif /* __STM32F4xx_HAL_SD_H */
Kojto 93:e188a91d3eaa 788
Kojto 93:e188a91d3eaa 789 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/