The official Mbed 2 C/C++ SDK provides the software platform and libraries to build your applications.
Dependents: hello SerialTestv11 SerialTestv12 Sierpinski ... more
mbed 2
This is the mbed 2 library. If you'd like to learn about Mbed OS please see the mbed-os docs.
TARGET_MTB_MTS_DRAGONFLY/TARGET_STM/TARGET_STM32F4/TARGET_MTB_MTS_DRAGONFLY/PinNames.h
- Committer:
- AnnaBridge
- Date:
- 2018-09-06
- Revision:
- 170:e95d10626187
- Parent:
- 161:aa5281ff4a02
File content as of revision 170:e95d10626187:
/* mbed Microcontroller Library ******************************************************************************* * Copyright (c) 2014, STMicroelectronics * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ******************************************************************************* */ #ifndef MBED_PINNAMES_H #define MBED_PINNAMES_H #include "cmsis.h" #include "PinNamesTypes.h" #ifdef __cplusplus extern "C" { #endif typedef enum { // Not connected NC = -1, PA_0 = 0x00, PA_1 = 0x01, PA_2 = 0x02, PA_3 = 0x03, PA_4 = 0x04, PA_5 = 0x05, PA_6 = 0x06, PA_7 = 0x07, PA_8 = 0x08, PA_9 = 0x09, PA_10 = 0x0A, PA_11 = 0x0B, PA_12 = 0x0C, PA_13 = 0x0D, PA_14 = 0x0E, PA_15 = 0x0F, PB_0 = 0x10, PB_1 = 0x11, PB_2 = 0x12, PB_3 = 0x13, PB_4 = 0x14, PB_5 = 0x15, PB_6 = 0x16, PB_7 = 0x17, PB_8 = 0x18, PB_9 = 0x19, PB_10 = 0x1A, PB_12 = 0x1C, PB_13 = 0x1D, PB_14 = 0x1E, PB_15 = 0x1F, PC_0 = 0x20, PC_1 = 0x21, PC_2 = 0x22, PC_3 = 0x23, PC_4 = 0x24, PC_5 = 0x25, PC_6 = 0x26, PC_7 = 0x27, PC_8 = 0x28, PC_9 = 0x29, PC_10 = 0x2A, PC_11 = 0x2B, PC_12 = 0x2C, PC_13 = 0x2D, PC_14 = 0x2E, PC_15 = 0x2F, PD_2 = 0x32, PH_0 = 0x70, PH_1 = 0x71, // ADC internal channels ADC_TEMP = 0xF0, ADC_VREF = 0xF1, ADC_VBAT = 0xF2, // Module pins // Defined based on the external pin (40-pin connector) alternate function mapping (Page 15 of MTQ-H5-B01 device guide) // Device guide used: S000628,Version1.4 P_1 = PB_6, P_2 = PA_14, P_3 = PA_15, P_4 = PB_4, P_5 = NC, P_6 = NC, P_7 = NC, P_8 = NC, P_9 = PA_2, P_10 = PA_7, P_11 = PB_1, P_12 = PA_1, P_13 = NC, P_14 = PB_5, P_15 = PA_5, P_16 = PB_8, P_17 = PB_15, P_18 = PC_2, P_19 = PB_0, P_20 = PC_0, P_21 = PC_1, P_22 = PC_4, P_23 = PB_13, P_24 = PC_9, P_25 = PB_9, P_26 = PA_6, P_27 = PC_8, P_28 = NC, P_29 = PA_0, P_30 = PA_9, P_31 = PA_8, P_32 = PA_3, P_33 = NC, P_34 = NC, P_35 = NC, P_36 = NC, P_37 = NC, P_38 = PB_3, P_39 = PA_13, P_40 = PB_7, // STDIO for console print #ifdef MBED_CONF_TARGET_STDIO_UART_TX STDIO_UART_TX = MBED_CONF_TARGET_STDIO_UART_TX, #elif MBED_CONF_TARGET_USB_TX STDIO_UART_TX = MBED_CONF_TARGET_USB_TX, #else STDIO_UART_TX = PB_6, #endif #ifdef MBED_CONF_TARGET_STDIO_UART_RX STDIO_UART_RX = MBED_CONF_TARGET_STDIO_UART_RX, #elif MBED_CONF_TARGET_USB_RX STDIO_UART_TX = MBED_CONF_TARGET_USB_RX, #else STDIO_UART_RX = PB_7, #endif //DAPLink USBTX = STDIO_UART_TX, USBRX = STDIO_UART_RX, SWDIO = PA_13, SWCLK = PA_14, I2C1_SCL = PB_8, I2C1_SDA = PB_9, I2C3_SCL = PA_8, I2C3_SDA = PC_9, I2C_SCL = I2C1_SCL, I2C_SDA = I2C1_SDA, SPI1_MOSI = PB_5, SPI1_MISO = PA_6, SPI1_SCK = PA_5, SPI2_MOSI = PB_15, SPI2_MISO = PC_2, SPI2_SCK = PB_13, SPI_MOSI = SPI1_MOSI, SPI_MISO = SPI1_MISO, SPI_SCK = SPI1_SCK, SPI_CS1 = PA_3, //LCD CS SPI_CS2 = PA_15, //SD Card CS SERIAL_TX = PA_2, SERIAL_RX = PA_3, SERIAL_RTS = PA_0, SERIAL_CTS = PA_1, SERIAL_DCD = PA_7, SERIAL_DSR = PA_9, SERIAL_DTR = PA_8, SERIAL_RI = PB_1, WAKEUP = PA_0, // Generic signals namings LED1 = PA_7, LED2 = PC_4, LED3 = PB_13, //MTB mapped to LINK_STATUS pin on module. SW1 = PB_4, GPIO1 = PC_8, GPIO3 = PB_1, AIN0 = PB_0, AIN1 = PC_0, AIN2 = PC_1, //Standardized button names BUTTON1 = SW1, RADIO_TX = PC_7, RADIO_RX = PC_6, RADIO_RTS = PB_10, RADIO_CTS = PB_12, RADIO_DCD = NC, RADIO_DSR = NC, RADIO_DTR = NC, RADIO_RI = NC, MDMPWRON = PC_13, // 3G_ONOFF DragonFly Design Guide, Page No. 16 MDMTXD = RADIO_TX, // Transmit Data MDMRXD = RADIO_RX, // Receive Data MDMRTS = RADIO_RTS, // Request to Send MDMCTS = RADIO_CTS, // Clear to Send MDMDCD = RADIO_DCD, // Data Carrier Detect MDMDSR = RADIO_DSR, // Data Set Ready MDMDTR = RADIO_DTR, // Data Terminal Ready MDMRI = RADIO_RI, // Ring Indicator } PinName; #define ACTIVE_HIGH_POLARITY 1 #define ACTIVE_LOW_POLARITY 0 #define MDM_PIN_POLARITY ACTIVE_HIGH_POLARITY #ifdef __cplusplus } #endif #endif