The official Mbed 2 C/C++ SDK provides the software platform and libraries to build your applications.
Dependents: hello SerialTestv11 SerialTestv12 Sierpinski ... more
mbed 2
This is the mbed 2 library. If you'd like to learn about Mbed OS please see the mbed-os docs.
TARGET_DISCO_L496AG/TARGET_STM/TARGET_STM32L4/device/stm32l4xx_ll_crc.h
- Committer:
- AnnaBridge
- Date:
- 2018-04-19
- Revision:
- 165:d1b4690b3f8b
File content as of revision 165:d1b4690b3f8b:
/** ****************************************************************************** * @file stm32l4xx_ll_crc.h * @author MCD Application Team * @brief Header file of CRC LL module. ****************************************************************************** * @attention * * <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2> * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32L4xx_LL_CRC_H #define __STM32L4xx_LL_CRC_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ #include "stm32l4xx.h" /** @addtogroup STM32L4xx_LL_Driver * @{ */ #if defined(CRC) /** @defgroup CRC_LL CRC * @{ */ /* Private types -------------------------------------------------------------*/ /* Private variables ---------------------------------------------------------*/ /* Private constants ---------------------------------------------------------*/ /* Private macros ------------------------------------------------------------*/ /* Exported types ------------------------------------------------------------*/ /* Exported constants --------------------------------------------------------*/ /** @defgroup CRC_LL_Exported_Constants CRC Exported Constants * @{ */ /** @defgroup CRC_LL_EC_POLYLENGTH Polynomial length * @{ */ #define LL_CRC_POLYLENGTH_32B 0x00000000U /*!< 32 bits Polynomial size */ #define LL_CRC_POLYLENGTH_16B CRC_CR_POLYSIZE_0 /*!< 16 bits Polynomial size */ #define LL_CRC_POLYLENGTH_8B CRC_CR_POLYSIZE_1 /*!< 8 bits Polynomial size */ #define LL_CRC_POLYLENGTH_7B (CRC_CR_POLYSIZE_1 | CRC_CR_POLYSIZE_0) /*!< 7 bits Polynomial size */ /** * @} */ /** @defgroup CRC_LL_EC_INDATA_REVERSE Input Data Reverse * @{ */ #define LL_CRC_INDATA_REVERSE_NONE 0x00000000U /*!< Input Data bit order not affected */ #define LL_CRC_INDATA_REVERSE_BYTE CRC_CR_REV_IN_0 /*!< Input Data bit reversal done by byte */ #define LL_CRC_INDATA_REVERSE_HALFWORD CRC_CR_REV_IN_1 /*!< Input Data bit reversal done by half-word */ #define LL_CRC_INDATA_REVERSE_WORD (CRC_CR_REV_IN_1 | CRC_CR_REV_IN_0) /*!< Input Data bit reversal done by word */ /** * @} */ /** @defgroup CRC_LL_EC_OUTDATA_REVERSE Output Data Reverse * @{ */ #define LL_CRC_OUTDATA_REVERSE_NONE 0x00000000U /*!< Output Data bit order not affected */ #define LL_CRC_OUTDATA_REVERSE_BIT CRC_CR_REV_OUT /*!< Output Data bit reversal done by bit */ /** * @} */ /** @defgroup CRC_LL_EC_Default_Polynomial_Value Default CRC generating polynomial value * @brief Normal representation of this polynomial value is * X^32 + X^26 + X^23 + X^22 + X^16 + X^12 + X^11 + X^10 +X^8 + X^7 + X^5 + X^4 + X^2 + X + 1 . * @{ */ #define LL_CRC_DEFAULT_CRC32_POLY 0x04C11DB7U /*!< Default CRC generating polynomial value */ /** * @} */ /** @defgroup CRC_LL_EC_Default_InitValue Default CRC computation initialization value * @{ */ #define LL_CRC_DEFAULT_CRC_INITVALUE 0xFFFFFFFFU /*!< Default CRC computation initialization value */ /** * @} */ /** * @} */ /* Exported macro ------------------------------------------------------------*/ /** @defgroup CRC_LL_Exported_Macros CRC Exported Macros * @{ */ /** @defgroup CRC_LL_EM_WRITE_READ Common Write and read registers Macros * @{ */ /** * @brief Write a value in CRC register * @param __INSTANCE__ CRC Instance * @param __REG__ Register to be written * @param __VALUE__ Value to be written in the register * @retval None */ #define LL_CRC_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, __VALUE__) /** * @brief Read a value in CRC register * @param __INSTANCE__ CRC Instance * @param __REG__ Register to be read * @retval Register value */ #define LL_CRC_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) /** * @} */ /** * @} */ /* Exported functions --------------------------------------------------------*/ /** @defgroup CRC_LL_Exported_Functions CRC Exported Functions * @{ */ /** @defgroup CRC_LL_EF_Configuration CRC Configuration functions * @{ */ /** * @brief Reset the CRC calculation unit. * @note If Programmable Initial CRC value feature * is available, also set the Data Register to the value stored in the * CRC_INIT register, otherwise, reset Data Register to its default value. * @rmtoll CR RESET LL_CRC_ResetCRCCalculationUnit * @param CRCx CRC Instance * @retval None */ __STATIC_INLINE void LL_CRC_ResetCRCCalculationUnit(CRC_TypeDef *CRCx) { SET_BIT(CRCx->CR, CRC_CR_RESET); } /** * @brief Configure size of the polynomial. * @rmtoll CR POLYSIZE LL_CRC_SetPolynomialSize * @param CRCx CRC Instance * @param PolySize This parameter can be one of the following values: * @arg @ref LL_CRC_POLYLENGTH_32B * @arg @ref LL_CRC_POLYLENGTH_16B * @arg @ref LL_CRC_POLYLENGTH_8B * @arg @ref LL_CRC_POLYLENGTH_7B * @retval None */ __STATIC_INLINE void LL_CRC_SetPolynomialSize(CRC_TypeDef *CRCx, uint32_t PolySize) { MODIFY_REG(CRCx->CR, CRC_CR_POLYSIZE, PolySize); } /** * @brief Return size of the polynomial. * @rmtoll CR POLYSIZE LL_CRC_GetPolynomialSize * @param CRCx CRC Instance * @retval Returned value can be one of the following values: * @arg @ref LL_CRC_POLYLENGTH_32B * @arg @ref LL_CRC_POLYLENGTH_16B * @arg @ref LL_CRC_POLYLENGTH_8B * @arg @ref LL_CRC_POLYLENGTH_7B */ __STATIC_INLINE uint32_t LL_CRC_GetPolynomialSize(CRC_TypeDef *CRCx) { return (uint32_t)(READ_BIT(CRCx->CR, CRC_CR_POLYSIZE)); } /** * @brief Configure the reversal of the bit order of the input data * @rmtoll CR REV_IN LL_CRC_SetInputDataReverseMode * @param CRCx CRC Instance * @param ReverseMode This parameter can be one of the following values: * @arg @ref LL_CRC_INDATA_REVERSE_NONE * @arg @ref LL_CRC_INDATA_REVERSE_BYTE * @arg @ref LL_CRC_INDATA_REVERSE_HALFWORD * @arg @ref LL_CRC_INDATA_REVERSE_WORD * @retval None */ __STATIC_INLINE void LL_CRC_SetInputDataReverseMode(CRC_TypeDef *CRCx, uint32_t ReverseMode) { MODIFY_REG(CRCx->CR, CRC_CR_REV_IN, ReverseMode); } /** * @brief Return type of reversal for input data bit order * @rmtoll CR REV_IN LL_CRC_GetInputDataReverseMode * @param CRCx CRC Instance * @retval Returned value can be one of the following values: * @arg @ref LL_CRC_INDATA_REVERSE_NONE * @arg @ref LL_CRC_INDATA_REVERSE_BYTE * @arg @ref LL_CRC_INDATA_REVERSE_HALFWORD * @arg @ref LL_CRC_INDATA_REVERSE_WORD */ __STATIC_INLINE uint32_t LL_CRC_GetInputDataReverseMode(CRC_TypeDef *CRCx) { return (uint32_t)(READ_BIT(CRCx->CR, CRC_CR_REV_IN)); } /** * @brief Configure the reversal of the bit order of the Output data * @rmtoll CR REV_OUT LL_CRC_SetOutputDataReverseMode * @param CRCx CRC Instance * @param ReverseMode This parameter can be one of the following values: * @arg @ref LL_CRC_OUTDATA_REVERSE_NONE * @arg @ref LL_CRC_OUTDATA_REVERSE_BIT * @retval None */ __STATIC_INLINE void LL_CRC_SetOutputDataReverseMode(CRC_TypeDef *CRCx, uint32_t ReverseMode) { MODIFY_REG(CRCx->CR, CRC_CR_REV_OUT, ReverseMode); } /** * @brief Configure the reversal of the bit order of the Output data * @rmtoll CR REV_OUT LL_CRC_GetOutputDataReverseMode * @param CRCx CRC Instance * @retval Returned value can be one of the following values: * @arg @ref LL_CRC_OUTDATA_REVERSE_NONE * @arg @ref LL_CRC_OUTDATA_REVERSE_BIT */ __STATIC_INLINE uint32_t LL_CRC_GetOutputDataReverseMode(CRC_TypeDef *CRCx) { return (uint32_t)(READ_BIT(CRCx->CR, CRC_CR_REV_OUT)); } /** * @brief Initialize the Programmable initial CRC value. * @note If the CRC size is less than 32 bits, the least significant bits * are used to write the correct value * @note LL_CRC_DEFAULT_CRC_INITVALUE could be used as value for InitCrc parameter. * @rmtoll INIT INIT LL_CRC_SetInitialData * @param CRCx CRC Instance * @param InitCrc Value to be programmed in Programmable initial CRC value register * @retval None */ __STATIC_INLINE void LL_CRC_SetInitialData(CRC_TypeDef *CRCx, uint32_t InitCrc) { WRITE_REG(CRCx->INIT, InitCrc); } /** * @brief Return current Initial CRC value. * @note If the CRC size is less than 32 bits, the least significant bits * are used to read the correct value * @rmtoll INIT INIT LL_CRC_GetInitialData * @param CRCx CRC Instance * @retval Value programmed in Programmable initial CRC value register */ __STATIC_INLINE uint32_t LL_CRC_GetInitialData(CRC_TypeDef *CRCx) { return (uint32_t)(READ_REG(CRCx->INIT)); } /** * @brief Initialize the Programmable polynomial value * (coefficients of the polynomial to be used for CRC calculation). * @note LL_CRC_DEFAULT_CRC32_POLY could be used as value for PolynomCoef parameter. * @note Please check Reference Manual and existing Errata Sheets, * regarding possible limitations for Polynomial values usage. * For example, for a polynomial of degree 7, X^7 + X^6 + X^5 + X^2 + 1 is written 0x65 * @rmtoll POL POL LL_CRC_SetPolynomialCoef * @param CRCx CRC Instance * @param PolynomCoef Value to be programmed in Programmable Polynomial value register * @retval None */ __STATIC_INLINE void LL_CRC_SetPolynomialCoef(CRC_TypeDef *CRCx, uint32_t PolynomCoef) { WRITE_REG(CRCx->POL, PolynomCoef); } /** * @brief Return current Programmable polynomial value * @note Please check Reference Manual and existing Errata Sheets, * regarding possible limitations for Polynomial values usage. * For example, for a polynomial of degree 7, X^7 + X^6 + X^5 + X^2 + 1 is written 0x65 * @rmtoll POL POL LL_CRC_GetPolynomialCoef * @param CRCx CRC Instance * @retval Value programmed in Programmable Polynomial value register */ __STATIC_INLINE uint32_t LL_CRC_GetPolynomialCoef(CRC_TypeDef *CRCx) { return (uint32_t)(READ_REG(CRCx->POL)); } /** * @} */ /** @defgroup CRC_LL_EF_Data_Management Data_Management * @{ */ /** * @brief Write given 32-bit data to the CRC calculator * @rmtoll DR DR LL_CRC_FeedData32 * @param CRCx CRC Instance * @param InData value to be provided to CRC calculator between between Min_Data=0 and Max_Data=0xFFFFFFFF * @retval None */ __STATIC_INLINE void LL_CRC_FeedData32(CRC_TypeDef *CRCx, uint32_t InData) { WRITE_REG(CRCx->DR, InData); } /** * @brief Write given 16-bit data to the CRC calculator * @rmtoll DR DR LL_CRC_FeedData16 * @param CRCx CRC Instance * @param InData 16 bit value to be provided to CRC calculator between between Min_Data=0 and Max_Data=0xFFFF * @retval None */ __STATIC_INLINE void LL_CRC_FeedData16(CRC_TypeDef *CRCx, uint16_t InData) { __IO uint16_t *pReg; pReg = (__IO uint16_t *)(__IO void *)(&CRCx->DR); *pReg = InData; } /** * @brief Write given 8-bit data to the CRC calculator * @rmtoll DR DR LL_CRC_FeedData8 * @param CRCx CRC Instance * @param InData 8 bit value to be provided to CRC calculator between between Min_Data=0 and Max_Data=0xFF * @retval None */ __STATIC_INLINE void LL_CRC_FeedData8(CRC_TypeDef *CRCx, uint8_t InData) { *(uint8_t __IO *)(&CRCx->DR) = (uint8_t) InData; } /** * @brief Return current CRC calculation result. 32 bits value is returned. * @rmtoll DR DR LL_CRC_ReadData32 * @param CRCx CRC Instance * @retval Current CRC calculation result as stored in CRC_DR register (32 bits). */ __STATIC_INLINE uint32_t LL_CRC_ReadData32(CRC_TypeDef *CRCx) { return (uint32_t)(READ_REG(CRCx->DR)); } /** * @brief Return current CRC calculation result. 16 bits value is returned. * @note This function is expected to be used in a 16 bits CRC polynomial size context. * @rmtoll DR DR LL_CRC_ReadData16 * @param CRCx CRC Instance * @retval Current CRC calculation result as stored in CRC_DR register (16 bits). */ __STATIC_INLINE uint16_t LL_CRC_ReadData16(CRC_TypeDef *CRCx) { return (uint16_t)READ_REG(CRCx->DR); } /** * @brief Return current CRC calculation result. 8 bits value is returned. * @note This function is expected to be used in a 8 bits CRC polynomial size context. * @rmtoll DR DR LL_CRC_ReadData8 * @param CRCx CRC Instance * @retval Current CRC calculation result as stored in CRC_DR register (8 bits). */ __STATIC_INLINE uint8_t LL_CRC_ReadData8(CRC_TypeDef *CRCx) { return (uint8_t)READ_REG(CRCx->DR); } /** * @brief Return current CRC calculation result. 7 bits value is returned. * @note This function is expected to be used in a 7 bits CRC polynomial size context. * @rmtoll DR DR LL_CRC_ReadData7 * @param CRCx CRC Instance * @retval Current CRC calculation result as stored in CRC_DR register (7 bits). */ __STATIC_INLINE uint8_t LL_CRC_ReadData7(CRC_TypeDef *CRCx) { return (uint8_t)(READ_REG(CRCx->DR) & 0x7FU); } /** * @brief Return data stored in the Independent Data(IDR) register. * @note This register can be used as a temporary storage location. * @note Refer to the Reference Manual to get the authorized data length in bits. * @rmtoll IDR IDR LL_CRC_Read_IDR * @param CRCx CRC Instance * @retval Value stored in CRC_IDR register */ __STATIC_INLINE uint32_t LL_CRC_Read_IDR(CRC_TypeDef *CRCx) { return (uint32_t)(READ_REG(CRCx->IDR)); } /** * @brief Store data in the Independent Data(IDR) register. * @note This register can be used as a temporary storage location. * @note Refer to the Reference Manual to get the authorized data length in bits. * @rmtoll IDR IDR LL_CRC_Write_IDR * @param CRCx CRC Instance * @param InData value to be stored in CRC_IDR register * @retval None */ __STATIC_INLINE void LL_CRC_Write_IDR(CRC_TypeDef *CRCx, uint32_t InData) { #if (CRC_IDR_IDR == 0x0FFU) *((uint8_t __IO *)(&CRCx->IDR)) = (uint8_t) InData; #else WRITE_REG(CRCx->IDR, InData); #endif } /** * @} */ #if defined(USE_FULL_LL_DRIVER) /** @defgroup CRC_LL_EF_Init Initialization and de-initialization functions * @{ */ ErrorStatus LL_CRC_DeInit(CRC_TypeDef *CRCx); /** * @} */ #endif /* USE_FULL_LL_DRIVER */ /** * @} */ /** * @} */ #endif /* defined(CRC) */ /** * @} */ #ifdef __cplusplus } #endif #endif /* __STM32L4xx_LL_CRC_H */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/