File content as of revision 104:b9ad9a133dc7:

/*
** ###################################################################
**     Compilers:           Keil ARM C/C++ Compiler
**                          Freescale C/C++ for Embedded ARM
**                          GNU C Compiler
**                          IAR ANSI C/C++ Compiler for ARM
**
**     Reference manual:    K64P144M120SF5RM, Rev.2, January 2014
**     Version:             rev. 2.5, 2014-02-10
**     Build:               b140604
**
**     Abstract:
**         Extension to the CMSIS register access layer header.
**
**     Copyright (c) 2014 Freescale Semiconductor, Inc.
**     All rights reserved.
**
**     Redistribution and use in source and binary forms, with or without modification,
**     are permitted provided that the following conditions are met:
**
**     o Redistributions of source code must retain the above copyright notice, this list
**       of conditions and the following disclaimer.
**
**     o Redistributions in binary form must reproduce the above copyright notice, this
**       list of conditions and the following disclaimer in the documentation and/or
**       other materials provided with the distribution.
**
**     o Neither the name of Freescale Semiconductor, Inc. nor the names of its
**       contributors may be used to endorse or promote products derived from this
**       software without specific prior written permission.
**
**     THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
**     ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
**     WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
**     DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
**     ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
**     (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
**     LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
**     ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
**     (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
**     SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
**
**     http:                 www.freescale.com
**     mail:                 support@freescale.com
**
**     Revisions:
**     - rev. 1.0 (2013-08-12)
**         Initial version.
**     - rev. 2.0 (2013-10-29)
**         Register accessor macros added to the memory map.
**         Symbols for Processor Expert memory map compatibility added to the memory map.
**         Startup file for gcc has been updated according to CMSIS 3.2.
**         System initialization updated.
**         MCG - registers updated.
**         PORTA, PORTB, PORTC, PORTE - registers for digital filter removed.
**     - rev. 2.1 (2013-10-30)
**         Definition of BITBAND macros updated to support peripherals with 32-bit acces disabled.
**     - rev. 2.2 (2013-12-09)
**         DMA - EARS register removed.
**         AIPS0, AIPS1 - MPRA register updated.
**     - rev. 2.3 (2014-01-24)
**         Update according to reference manual rev. 2
**         ENET, MCG, MCM, SIM, USB - registers updated
**     - rev. 2.4 (2014-02-10)
**         The declaration of clock configurations has been moved to separate header file system_MK64F12.h
**         Update of SystemInit() and SystemCoreClockUpdate() functions.
**     - rev. 2.5 (2014-02-10)
**         The declaration of clock configurations has been moved to separate header file system_MK64F12.h
**         Update of SystemInit() and SystemCoreClockUpdate() functions.
**         Module access macro module_BASES replaced by module_BASE_PTRS.
**
** ###################################################################
*/

/*
 * WARNING! DO NOT EDIT THIS FILE DIRECTLY!
 *
 * This file was generated automatically and any changes may be lost.
 */
#ifndef __HW_FTM_REGISTERS_H__
#define __HW_FTM_REGISTERS_H__

#include "MK64F12.h"
#include "fsl_bitaccess.h"

/*
 * MK64F12 FTM
 *
 * FlexTimer Module
 *
 * Registers defined in this header file:
 * - HW_FTM_SC - Status And Control
 * - HW_FTM_CNT - Counter
 * - HW_FTM_MOD - Modulo
 * - HW_FTM_CnSC - Channel (n) Status And Control
 * - HW_FTM_CnV - Channel (n) Value
 * - HW_FTM_CNTIN - Counter Initial Value
 * - HW_FTM_STATUS - Capture And Compare Status
 * - HW_FTM_MODE - Features Mode Selection
 * - HW_FTM_SYNC - Synchronization
 * - HW_FTM_OUTINIT - Initial State For Channels Output
 * - HW_FTM_OUTMASK - Output Mask
 * - HW_FTM_COMBINE - Function For Linked Channels
 * - HW_FTM_DEADTIME - Deadtime Insertion Control
 * - HW_FTM_EXTTRIG - FTM External Trigger
 * - HW_FTM_POL - Channels Polarity
 * - HW_FTM_FMS - Fault Mode Status
 * - HW_FTM_FILTER - Input Capture Filter Control
 * - HW_FTM_FLTCTRL - Fault Control
 * - HW_FTM_QDCTRL - Quadrature Decoder Control And Status
 * - HW_FTM_CONF - Configuration
 * - HW_FTM_FLTPOL - FTM Fault Input Polarity
 * - HW_FTM_SYNCONF - Synchronization Configuration
 * - HW_FTM_INVCTRL - FTM Inverting Control
 * - HW_FTM_SWOCTRL - FTM Software Output Control
 * - HW_FTM_PWMLOAD - FTM PWM Load
 *
 * - hw_ftm_t - Struct containing all module registers.
 */

#define HW_FTM_INSTANCE_COUNT (4U) /*!< Number of instances of the FTM module. */
#define HW_FTM0 (0U) /*!< Instance number for FTM0. */
#define HW_FTM1 (1U) /*!< Instance number for FTM1. */
#define HW_FTM2 (2U) /*!< Instance number for FTM2. */
#define HW_FTM3 (3U) /*!< Instance number for FTM3. */

/*******************************************************************************
 * HW_FTM_SC - Status And Control
 ******************************************************************************/

/*!
 * @brief HW_FTM_SC - Status And Control (RW)
 *
 * Reset value: 0x00000000U
 *
 * SC contains the overflow status flag and control bits used to configure the
 * interrupt enable, FTM configuration, clock source, and prescaler factor. These
 * controls relate to all channels within this module.
 */
typedef union _hw_ftm_sc
{
    uint32_t U;
    struct _hw_ftm_sc_bitfields
    {
        uint32_t PS : 3;               /*!< [2:0] Prescale Factor Selection */
        uint32_t CLKS : 2;             /*!< [4:3] Clock Source Selection */
        uint32_t CPWMS : 1;            /*!< [5] Center-Aligned PWM Select */
        uint32_t TOIE : 1;             /*!< [6] Timer Overflow Interrupt Enable */
        uint32_t TOF : 1;              /*!< [7] Timer Overflow Flag */
        uint32_t RESERVED0 : 24;       /*!< [31:8]  */
    } B;
} hw_ftm_sc_t;

/*!
 * @name Constants and macros for entire FTM_SC register
 */
/*@{*/
#define HW_FTM_SC_ADDR(x)        ((x) + 0x0U)

#define HW_FTM_SC(x)             (*(__IO hw_ftm_sc_t *) HW_FTM_SC_ADDR(x))
#define HW_FTM_SC_RD(x)          (HW_FTM_SC(x).U)
#define HW_FTM_SC_WR(x, v)       (HW_FTM_SC(x).U = (v))
#define HW_FTM_SC_SET(x, v)      (HW_FTM_SC_WR(x, HW_FTM_SC_RD(x) |  (v)))
#define HW_FTM_SC_CLR(x, v)      (HW_FTM_SC_WR(x, HW_FTM_SC_RD(x) & ~(v)))
#define HW_FTM_SC_TOG(x, v)      (HW_FTM_SC_WR(x, HW_FTM_SC_RD(x) ^  (v)))
/*@}*/

/*
 * Constants & macros for individual FTM_SC bitfields
 */

/*!
 * @name Register FTM_SC, field PS[2:0] (RW)
 *
 * Selects one of 8 division factors for the clock source selected by CLKS. The
 * new prescaler factor affects the clock source on the next system clock cycle
 * after the new value is updated into the register bits. This field is write
 * protected. It can be written only when MODE[WPDIS] = 1.
 *
 * Values:
 * - 000 - Divide by 1
 * - 001 - Divide by 2
 * - 010 - Divide by 4
 * - 011 - Divide by 8
 * - 100 - Divide by 16
 * - 101 - Divide by 32
 * - 110 - Divide by 64
 * - 111 - Divide by 128
 */
/*@{*/
#define BP_FTM_SC_PS         (0U)          /*!< Bit position for FTM_SC_PS. */
#define BM_FTM_SC_PS         (0x00000007U) /*!< Bit mask for FTM_SC_PS. */
#define BS_FTM_SC_PS         (3U)          /*!< Bit field size in bits for FTM_SC_PS. */

/*! @brief Read current value of the FTM_SC_PS field. */
#define BR_FTM_SC_PS(x)      (HW_FTM_SC(x).B.PS)

/*! @brief Format value for bitfield FTM_SC_PS. */
#define BF_FTM_SC_PS(v)      ((uint32_t)((uint32_t)(v) << BP_FTM_SC_PS) & BM_FTM_SC_PS)

/*! @brief Set the PS field to a new value. */
#define BW_FTM_SC_PS(x, v)   (HW_FTM_SC_WR(x, (HW_FTM_SC_RD(x) & ~BM_FTM_SC_PS) | BF_FTM_SC_PS(v)))
/*@}*/

/*!
 * @name Register FTM_SC, field CLKS[4:3] (RW)
 *
 * Selects one of the three FTM counter clock sources. This field is write
 * protected. It can be written only when MODE[WPDIS] = 1.
 *
 * Values:
 * - 00 - No clock selected. This in effect disables the FTM counter.
 * - 01 - System clock
 * - 10 - Fixed frequency clock
 * - 11 - External clock
 */
/*@{*/
#define BP_FTM_SC_CLKS       (3U)          /*!< Bit position for FTM_SC_CLKS. */
#define BM_FTM_SC_CLKS       (0x00000018U) /*!< Bit mask for FTM_SC_CLKS. */
#define BS_FTM_SC_CLKS       (2U)          /*!< Bit field size in bits for FTM_SC_CLKS. */

/*! @brief Read current value of the FTM_SC_CLKS field. */
#define BR_FTM_SC_CLKS(x)    (HW_FTM_SC(x).B.CLKS)

/*! @brief Format value for bitfield FTM_SC_CLKS. */
#define BF_FTM_SC_CLKS(v)    ((uint32_t)((uint32_t)(v) << BP_FTM_SC_CLKS) & BM_FTM_SC_CLKS)

/*! @brief Set the CLKS field to a new value. */
#define BW_FTM_SC_CLKS(x, v) (HW_FTM_SC_WR(x, (HW_FTM_SC_RD(x) & ~BM_FTM_SC_CLKS) | BF_FTM_SC_CLKS(v)))
/*@}*/

/*!
 * @name Register FTM_SC, field CPWMS[5] (RW)
 *
 * Selects CPWM mode. This mode configures the FTM to operate in Up-Down
 * Counting mode. This field is write protected. It can be written only when MODE[WPDIS]
 * = 1.
 *
 * Values:
 * - 0 - FTM counter operates in Up Counting mode.
 * - 1 - FTM counter operates in Up-Down Counting mode.
 */
/*@{*/
#define BP_FTM_SC_CPWMS      (5U)          /*!< Bit position for FTM_SC_CPWMS. */
#define BM_FTM_SC_CPWMS      (0x00000020U) /*!< Bit mask for FTM_SC_CPWMS. */
#define BS_FTM_SC_CPWMS      (1U)          /*!< Bit field size in bits for FTM_SC_CPWMS. */

/*! @brief Read current value of the FTM_SC_CPWMS field. */
#define BR_FTM_SC_CPWMS(x)   (BITBAND_ACCESS32(HW_FTM_SC_ADDR(x), BP_FTM_SC_CPWMS))

/*! @brief Format value for bitfield FTM_SC_CPWMS. */
#define BF_FTM_SC_CPWMS(v)   ((uint32_t)((uint32_t)(v) << BP_FTM_SC_CPWMS) & BM_FTM_SC_CPWMS)

/*! @brief Set the CPWMS field to a new value. */
#define BW_FTM_SC_CPWMS(x, v) (BITBAND_ACCESS32(HW_FTM_SC_ADDR(x), BP_FTM_SC_CPWMS) = (v))
/*@}*/

/*!
 * @name Register FTM_SC, field TOIE[6] (RW)
 *
 * Enables FTM overflow interrupts.
 *
 * Values:
 * - 0 - Disable TOF interrupts. Use software polling.
 * - 1 - Enable TOF interrupts. An interrupt is generated when TOF equals one.
 */
/*@{*/
#define BP_FTM_SC_TOIE       (6U)          /*!< Bit position for FTM_SC_TOIE. */
#define BM_FTM_SC_TOIE       (0x00000040U) /*!< Bit mask for FTM_SC_TOIE. */
#define BS_FTM_SC_TOIE       (1U)          /*!< Bit field size in bits for FTM_SC_TOIE. */

/*! @brief Read current value of the FTM_SC_TOIE field. */
#define BR_FTM_SC_TOIE(x)    (BITBAND_ACCESS32(HW_FTM_SC_ADDR(x), BP_FTM_SC_TOIE))

/*! @brief Format value for bitfield FTM_SC_TOIE. */
#define BF_FTM_SC_TOIE(v)    ((uint32_t)((uint32_t)(v) << BP_FTM_SC_TOIE) & BM_FTM_SC_TOIE)

/*! @brief Set the TOIE field to a new value. */
#define BW_FTM_SC_TOIE(x, v) (BITBAND_ACCESS32(HW_FTM_SC_ADDR(x), BP_FTM_SC_TOIE) = (v))
/*@}*/

/*!
 * @name Register FTM_SC, field TOF[7] (ROWZ)
 *
 * Set by hardware when the FTM counter passes the value in the MOD register.
 * The TOF bit is cleared by reading the SC register while TOF is set and then
 * writing a 0 to TOF bit. Writing a 1 to TOF has no effect. If another FTM overflow
 * occurs between the read and write operations, the write operation has no
 * effect; therefore, TOF remains set indicating an overflow has occurred. In this
 * case, a TOF interrupt request is not lost due to the clearing sequence for a
 * previous TOF.
 *
 * Values:
 * - 0 - FTM counter has not overflowed.
 * - 1 - FTM counter has overflowed.
 */
/*@{*/
#define BP_FTM_SC_TOF        (7U)          /*!< Bit position for FTM_SC_TOF. */
#define BM_FTM_SC_TOF        (0x00000080U) /*!< Bit mask for FTM_SC_TOF. */
#define BS_FTM_SC_TOF        (1U)          /*!< Bit field size in bits for FTM_SC_TOF. */

/*! @brief Read current value of the FTM_SC_TOF field. */
#define BR_FTM_SC_TOF(x)     (BITBAND_ACCESS32(HW_FTM_SC_ADDR(x), BP_FTM_SC_TOF))

/*! @brief Format value for bitfield FTM_SC_TOF. */
#define BF_FTM_SC_TOF(v)     ((uint32_t)((uint32_t)(v) << BP_FTM_SC_TOF) & BM_FTM_SC_TOF)

/*! @brief Set the TOF field to a new value. */
#define BW_FTM_SC_TOF(x, v)  (BITBAND_ACCESS32(HW_FTM_SC_ADDR(x), BP_FTM_SC_TOF) = (v))
/*@}*/

/*******************************************************************************
 * HW_FTM_CNT - Counter
 ******************************************************************************/

/*!
 * @brief HW_FTM_CNT - Counter (RW)
 *
 * Reset value: 0x00000000U
 *
 * The CNT register contains the FTM counter value. Reset clears the CNT
 * register. Writing any value to COUNT updates the counter with its initial value,
 * CNTIN. When BDM is active, the FTM counter is frozen. This is the value that you
 * may read.
 */
typedef union _hw_ftm_cnt
{
    uint32_t U;
    struct _hw_ftm_cnt_bitfields
    {
        uint32_t COUNT : 16;           /*!< [15:0] Counter Value */
        uint32_t RESERVED0 : 16;       /*!< [31:16]  */
    } B;
} hw_ftm_cnt_t;

/*!
 * @name Constants and macros for entire FTM_CNT register
 */
/*@{*/
#define HW_FTM_CNT_ADDR(x)       ((x) + 0x4U)

#define HW_FTM_CNT(x)            (*(__IO hw_ftm_cnt_t *) HW_FTM_CNT_ADDR(x))
#define HW_FTM_CNT_RD(x)         (HW_FTM_CNT(x).U)
#define HW_FTM_CNT_WR(x, v)      (HW_FTM_CNT(x).U = (v))
#define HW_FTM_CNT_SET(x, v)     (HW_FTM_CNT_WR(x, HW_FTM_CNT_RD(x) |  (v)))
#define HW_FTM_CNT_CLR(x, v)     (HW_FTM_CNT_WR(x, HW_FTM_CNT_RD(x) & ~(v)))
#define HW_FTM_CNT_TOG(x, v)     (HW_FTM_CNT_WR(x, HW_FTM_CNT_RD(x) ^  (v)))
/*@}*/

/*
 * Constants & macros for individual FTM_CNT bitfields
 */

/*!
 * @name Register FTM_CNT, field COUNT[15:0] (RW)
 */
/*@{*/
#define BP_FTM_CNT_COUNT     (0U)          /*!< Bit position for FTM_CNT_COUNT. */
#define BM_FTM_CNT_COUNT     (0x0000FFFFU) /*!< Bit mask for FTM_CNT_COUNT. */
#define BS_FTM_CNT_COUNT     (16U)         /*!< Bit field size in bits for FTM_CNT_COUNT. */

/*! @brief Read current value of the FTM_CNT_COUNT field. */
#define BR_FTM_CNT_COUNT(x)  (HW_FTM_CNT(x).B.COUNT)

/*! @brief Format value for bitfield FTM_CNT_COUNT. */
#define BF_FTM_CNT_COUNT(v)  ((uint32_t)((uint32_t)(v) << BP_FTM_CNT_COUNT) & BM_FTM_CNT_COUNT)

/*! @brief Set the COUNT field to a new value. */
#define BW_FTM_CNT_COUNT(x, v) (HW_FTM_CNT_WR(x, (HW_FTM_CNT_RD(x) & ~BM_FTM_CNT_COUNT) | BF_FTM_CNT_COUNT(v)))
/*@}*/

/*******************************************************************************
 * HW_FTM_MOD - Modulo
 ******************************************************************************/

/*!
 * @brief HW_FTM_MOD - Modulo (RW)
 *
 * Reset value: 0x00000000U
 *
 * The Modulo register contains the modulo value for the FTM counter. After the
 * FTM counter reaches the modulo value, the overflow flag (TOF) becomes set at
 * the next clock, and the next value of FTM counter depends on the selected
 * counting method; see Counter. Writing to the MOD register latches the value into a
 * buffer. The MOD register is updated with the value of its write buffer
 * according to Registers updated from write buffers. If FTMEN = 0, this write coherency
 * mechanism may be manually reset by writing to the SC register whether BDM is
 * active or not. Initialize the FTM counter, by writing to CNT, before writing
 * to the MOD register to avoid confusion about when the first counter overflow
 * will occur.
 */
typedef union _hw_ftm_mod
{
    uint32_t U;
    struct _hw_ftm_mod_bitfields
    {
        uint32_t MOD : 16;             /*!< [15:0]  */
        uint32_t RESERVED0 : 16;       /*!< [31:16]  */
    } B;
} hw_ftm_mod_t;

/*!
 * @name Constants and macros for entire FTM_MOD register
 */
/*@{*/
#define HW_FTM_MOD_ADDR(x)       ((x) + 0x8U)

#define HW_FTM_MOD(x)            (*(__IO hw_ftm_mod_t *) HW_FTM_MOD_ADDR(x))
#define HW_FTM_MOD_RD(x)         (HW_FTM_MOD(x).U)
#define HW_FTM_MOD_WR(x, v)      (HW_FTM_MOD(x).U = (v))
#define HW_FTM_MOD_SET(x, v)     (HW_FTM_MOD_WR(x, HW_FTM_MOD_RD(x) |  (v)))
#define HW_FTM_MOD_CLR(x, v)     (HW_FTM_MOD_WR(x, HW_FTM_MOD_RD(x) & ~(v)))
#define HW_FTM_MOD_TOG(x, v)     (HW_FTM_MOD_WR(x, HW_FTM_MOD_RD(x) ^  (v)))
/*@}*/

/*
 * Constants & macros for individual FTM_MOD bitfields
 */

/*!
 * @name Register FTM_MOD, field MOD[15:0] (RW)
 *
 * Modulo Value
 */
/*@{*/
#define BP_FTM_MOD_MOD       (0U)          /*!< Bit position for FTM_MOD_MOD. */
#define BM_FTM_MOD_MOD       (0x0000FFFFU) /*!< Bit mask for FTM_MOD_MOD. */
#define BS_FTM_MOD_MOD       (16U)         /*!< Bit field size in bits for FTM_MOD_MOD. */

/*! @brief Read current value of the FTM_MOD_MOD field. */
#define BR_FTM_MOD_MOD(x)    (HW_FTM_MOD(x).B.MOD)

/*! @brief Format value for bitfield FTM_MOD_MOD. */
#define BF_FTM_MOD_MOD(v)    ((uint32_t)((uint32_t)(v) << BP_FTM_MOD_MOD) & BM_FTM_MOD_MOD)

/*! @brief Set the MOD field to a new value. */
#define BW_FTM_MOD_MOD(x, v) (HW_FTM_MOD_WR(x, (HW_FTM_MOD_RD(x) & ~BM_FTM_MOD_MOD) | BF_FTM_MOD_MOD(v)))
/*@}*/

/*******************************************************************************
 * HW_FTM_CnSC - Channel (n) Status And Control
 ******************************************************************************/

/*!
 * @brief HW_FTM_CnSC - Channel (n) Status And Control (RW)
 *
 * Reset value: 0x00000000U
 *
 * CnSC contains the channel-interrupt-status flag and control bits used to
 * configure the interrupt enable, channel configuration, and pin function. Mode,
 * edge, and level selection DECAPEN COMBINE CPWMS MSnB:MSnA ELSnB:ELSnA Mode
 * Configuration X X X XX 0 Pin not used for FTM-revert the channel pin to general
 * purpose I/O or other peripheral control 0 0 0 0 1 Input Capture Capture on Rising
 * Edge Only 10 Capture on Falling Edge Only 11 Capture on Rising or Falling Edge
 * 1 1 Output Compare Toggle Output on match 10 Clear Output on match 11 Set
 * Output on match 1X 10 Edge-Aligned PWM High-true pulses (clear Output on match)
 * X1 Low-true pulses (set Output on match) 1 XX 10 Center-Aligned PWM High-true
 * pulses (clear Output on match-up) X1 Low-true pulses (set Output on match-up) 1
 * 0 XX 10 Combine PWM High-true pulses (set on channel (n) match, and clear on
 * channel (n+1) match) X1 Low-true pulses (clear on channel (n) match, and set
 * on channel (n+1) match) 1 0 0 X0 See the following table (#ModeSel2Table). Dual
 * Edge Capture One-Shot Capture mode X1 Continuous Capture mode Dual Edge
 * Capture mode - edge polarity selection ELSnB ELSnA Channel Port Enable Detected
 * Edges 0 0 Disabled No edge 0 1 Enabled Rising edge 1 0 Enabled Falling edge 1 1
 * Enabled Rising and falling edges
 */
typedef union _hw_ftm_cnsc
{
    uint32_t U;
    struct _hw_ftm_cnsc_bitfields
    {
        uint32_t DMA : 1;              /*!< [0] DMA Enable */
        uint32_t RESERVED0 : 1;        /*!< [1]  */
        uint32_t ELSA : 1;             /*!< [2] Edge or Level Select */
        uint32_t ELSB : 1;             /*!< [3] Edge or Level Select */
        uint32_t MSA : 1;              /*!< [4] Channel Mode Select */
        uint32_t MSB : 1;              /*!< [5] Channel Mode Select */
        uint32_t CHIE : 1;             /*!< [6] Channel Interrupt Enable */
        uint32_t CHF : 1;              /*!< [7] Channel Flag */
        uint32_t RESERVED1 : 24;       /*!< [31:8]  */
    } B;
} hw_ftm_cnsc_t;

/*!
 * @name Constants and macros for entire FTM_CnSC register
 */
/*@{*/
#define HW_FTM_CnSC_COUNT (8U)

#define HW_FTM_CnSC_ADDR(x, n)   ((x) + 0xCU + (0x8U * (n)))

#define HW_FTM_CnSC(x, n)        (*(__IO hw_ftm_cnsc_t *) HW_FTM_CnSC_ADDR(x, n))
#define HW_FTM_CnSC_RD(x, n)     (HW_FTM_CnSC(x, n).U)
#define HW_FTM_CnSC_WR(x, n, v)  (HW_FTM_CnSC(x, n).U = (v))
#define HW_FTM_CnSC_SET(x, n, v) (HW_FTM_CnSC_WR(x, n, HW_FTM_CnSC_RD(x, n) |  (v)))
#define HW_FTM_CnSC_CLR(x, n, v) (HW_FTM_CnSC_WR(x, n, HW_FTM_CnSC_RD(x, n) & ~(v)))
#define HW_FTM_CnSC_TOG(x, n, v) (HW_FTM_CnSC_WR(x, n, HW_FTM_CnSC_RD(x, n) ^  (v)))
/*@}*/

/*
 * Constants & macros for individual FTM_CnSC bitfields
 */

/*!
 * @name Register FTM_CnSC, field DMA[0] (RW)
 *
 * Enables DMA transfers for the channel.
 *
 * Values:
 * - 0 - Disable DMA transfers.
 * - 1 - Enable DMA transfers.
 */
/*@{*/
#define BP_FTM_CnSC_DMA      (0U)          /*!< Bit position for FTM_CnSC_DMA. */
#define BM_FTM_CnSC_DMA      (0x00000001U) /*!< Bit mask for FTM_CnSC_DMA. */
#define BS_FTM_CnSC_DMA      (1U)          /*!< Bit field size in bits for FTM_CnSC_DMA. */

/*! @brief Read current value of the FTM_CnSC_DMA field. */
#define BR_FTM_CnSC_DMA(x, n) (BITBAND_ACCESS32(HW_FTM_CnSC_ADDR(x, n), BP_FTM_CnSC_DMA))

/*! @brief Format value for bitfield FTM_CnSC_DMA. */
#define BF_FTM_CnSC_DMA(v)   ((uint32_t)((uint32_t)(v) << BP_FTM_CnSC_DMA) & BM_FTM_CnSC_DMA)

/*! @brief Set the DMA field to a new value. */
#define BW_FTM_CnSC_DMA(x, n, v) (BITBAND_ACCESS32(HW_FTM_CnSC_ADDR(x, n), BP_FTM_CnSC_DMA) = (v))
/*@}*/

/*!
 * @name Register FTM_CnSC, field ELSA[2] (RW)
 *
 * The functionality of ELSB and ELSA depends on the channel mode. See
 * #ModeSel1Table. This field is write protected. It can be written only when MODE[WPDIS]
 * = 1.
 */
/*@{*/
#define BP_FTM_CnSC_ELSA     (2U)          /*!< Bit position for FTM_CnSC_ELSA. */
#define BM_FTM_CnSC_ELSA     (0x00000004U) /*!< Bit mask for FTM_CnSC_ELSA. */
#define BS_FTM_CnSC_ELSA     (1U)          /*!< Bit field size in bits for FTM_CnSC_ELSA. */

/*! @brief Read current value of the FTM_CnSC_ELSA field. */
#define BR_FTM_CnSC_ELSA(x, n) (BITBAND_ACCESS32(HW_FTM_CnSC_ADDR(x, n), BP_FTM_CnSC_ELSA))

/*! @brief Format value for bitfield FTM_CnSC_ELSA. */
#define BF_FTM_CnSC_ELSA(v)  ((uint32_t)((uint32_t)(v) << BP_FTM_CnSC_ELSA) & BM_FTM_CnSC_ELSA)

/*! @brief Set the ELSA field to a new value. */
#define BW_FTM_CnSC_ELSA(x, n, v) (BITBAND_ACCESS32(HW_FTM_CnSC_ADDR(x, n), BP_FTM_CnSC_ELSA) = (v))
/*@}*/

/*!
 * @name Register FTM_CnSC, field ELSB[3] (RW)
 *
 * The functionality of ELSB and ELSA depends on the channel mode. See
 * #ModeSel1Table. This field is write protected. It can be written only when MODE[WPDIS]
 * = 1.
 */
/*@{*/
#define BP_FTM_CnSC_ELSB     (3U)          /*!< Bit position for FTM_CnSC_ELSB. */
#define BM_FTM_CnSC_ELSB     (0x00000008U) /*!< Bit mask for FTM_CnSC_ELSB. */
#define BS_FTM_CnSC_ELSB     (1U)          /*!< Bit field size in bits for FTM_CnSC_ELSB. */

/*! @brief Read current value of the FTM_CnSC_ELSB field. */
#define BR_FTM_CnSC_ELSB(x, n) (BITBAND_ACCESS32(HW_FTM_CnSC_ADDR(x, n), BP_FTM_CnSC_ELSB))

/*! @brief Format value for bitfield FTM_CnSC_ELSB. */
#define BF_FTM_CnSC_ELSB(v)  ((uint32_t)((uint32_t)(v) << BP_FTM_CnSC_ELSB) & BM_FTM_CnSC_ELSB)

/*! @brief Set the ELSB field to a new value. */
#define BW_FTM_CnSC_ELSB(x, n, v) (BITBAND_ACCESS32(HW_FTM_CnSC_ADDR(x, n), BP_FTM_CnSC_ELSB) = (v))
/*@}*/

/*!
 * @name Register FTM_CnSC, field MSA[4] (RW)
 *
 * Used for further selections in the channel logic. Its functionality is
 * dependent on the channel mode. See #ModeSel1Table. This field is write protected. It
 * can be written only when MODE[WPDIS] = 1.
 */
/*@{*/
#define BP_FTM_CnSC_MSA      (4U)          /*!< Bit position for FTM_CnSC_MSA. */
#define BM_FTM_CnSC_MSA      (0x00000010U) /*!< Bit mask for FTM_CnSC_MSA. */
#define BS_FTM_CnSC_MSA      (1U)          /*!< Bit field size in bits for FTM_CnSC_MSA. */

/*! @brief Read current value of the FTM_CnSC_MSA field. */
#define BR_FTM_CnSC_MSA(x, n) (BITBAND_ACCESS32(HW_FTM_CnSC_ADDR(x, n), BP_FTM_CnSC_MSA))

/*! @brief Format value for bitfield FTM_CnSC_MSA. */
#define BF_FTM_CnSC_MSA(v)   ((uint32_t)((uint32_t)(v) << BP_FTM_CnSC_MSA) & BM_FTM_CnSC_MSA)

/*! @brief Set the MSA field to a new value. */
#define BW_FTM_CnSC_MSA(x, n, v) (BITBAND_ACCESS32(HW_FTM_CnSC_ADDR(x, n), BP_FTM_CnSC_MSA) = (v))
/*@}*/

/*!
 * @name Register FTM_CnSC, field MSB[5] (RW)
 *
 * Used for further selections in the channel logic. Its functionality is
 * dependent on the channel mode. See #ModeSel1Table. This field is write protected. It
 * can be written only when MODE[WPDIS] = 1.
 */
/*@{*/
#define BP_FTM_CnSC_MSB      (5U)          /*!< Bit position for FTM_CnSC_MSB. */
#define BM_FTM_CnSC_MSB      (0x00000020U) /*!< Bit mask for FTM_CnSC_MSB. */
#define BS_FTM_CnSC_MSB      (1U)          /*!< Bit field size in bits for FTM_CnSC_MSB. */

/*! @brief Read current value of the FTM_CnSC_MSB field. */
#define BR_FTM_CnSC_MSB(x, n) (BITBAND_ACCESS32(HW_FTM_CnSC_ADDR(x, n), BP_FTM_CnSC_MSB))

/*! @brief Format value for bitfield FTM_CnSC_MSB. */
#define BF_FTM_CnSC_MSB(v)   ((uint32_t)((uint32_t)(v) << BP_FTM_CnSC_MSB) & BM_FTM_CnSC_MSB)

/*! @brief Set the MSB field to a new value. */
#define BW_FTM_CnSC_MSB(x, n, v) (BITBAND_ACCESS32(HW_FTM_CnSC_ADDR(x, n), BP_FTM_CnSC_MSB) = (v))
/*@}*/

/*!
 * @name Register FTM_CnSC, field CHIE[6] (RW)
 *
 * Enables channel interrupts.
 *
 * Values:
 * - 0 - Disable channel interrupts. Use software polling.
 * - 1 - Enable channel interrupts.
 */
/*@{*/
#define BP_FTM_CnSC_CHIE     (6U)          /*!< Bit position for FTM_CnSC_CHIE. */
#define BM_FTM_CnSC_CHIE     (0x00000040U) /*!< Bit mask for FTM_CnSC_CHIE. */
#define BS_FTM_CnSC_CHIE     (1U)          /*!< Bit field size in bits for FTM_CnSC_CHIE. */

/*! @brief Read current value of the FTM_CnSC_CHIE field. */
#define BR_FTM_CnSC_CHIE(x, n) (BITBAND_ACCESS32(HW_FTM_CnSC_ADDR(x, n), BP_FTM_CnSC_CHIE))

/*! @brief Format value for bitfield FTM_CnSC_CHIE. */
#define BF_FTM_CnSC_CHIE(v)  ((uint32_t)((uint32_t)(v) << BP_FTM_CnSC_CHIE) & BM_FTM_CnSC_CHIE)

/*! @brief Set the CHIE field to a new value. */
#define BW_FTM_CnSC_CHIE(x, n, v) (BITBAND_ACCESS32(HW_FTM_CnSC_ADDR(x, n), BP_FTM_CnSC_CHIE) = (v))
/*@}*/

/*!
 * @name Register FTM_CnSC, field CHF[7] (ROWZ)
 *
 * Set by hardware when an event occurs on the channel. CHF is cleared by
 * reading the CSC register while CHnF is set and then writing a 0 to the CHF bit.
 * Writing a 1 to CHF has no effect. If another event occurs between the read and
 * write operations, the write operation has no effect; therefore, CHF remains set
 * indicating an event has occurred. In this case a CHF interrupt request is not
 * lost due to the clearing sequence for a previous CHF.
 *
 * Values:
 * - 0 - No channel event has occurred.
 * - 1 - A channel event has occurred.
 */
/*@{*/
#define BP_FTM_CnSC_CHF      (7U)          /*!< Bit position for FTM_CnSC_CHF. */
#define BM_FTM_CnSC_CHF      (0x00000080U) /*!< Bit mask for FTM_CnSC_CHF. */
#define BS_FTM_CnSC_CHF      (1U)          /*!< Bit field size in bits for FTM_CnSC_CHF. */

/*! @brief Read current value of the FTM_CnSC_CHF field. */
#define BR_FTM_CnSC_CHF(x, n) (BITBAND_ACCESS32(HW_FTM_CnSC_ADDR(x, n), BP_FTM_CnSC_CHF))

/*! @brief Format value for bitfield FTM_CnSC_CHF. */
#define BF_FTM_CnSC_CHF(v)   ((uint32_t)((uint32_t)(v) << BP_FTM_CnSC_CHF) & BM_FTM_CnSC_CHF)

/*! @brief Set the CHF field to a new value. */
#define BW_FTM_CnSC_CHF(x, n, v) (BITBAND_ACCESS32(HW_FTM_CnSC_ADDR(x, n), BP_FTM_CnSC_CHF) = (v))
/*@}*/
/*******************************************************************************
 * HW_FTM_CnV - Channel (n) Value
 ******************************************************************************/

/*!
 * @brief HW_FTM_CnV - Channel (n) Value (RW)
 *
 * Reset value: 0x00000000U
 *
 * These registers contain the captured FTM counter value for the input modes or
 * the match value for the output modes. In Input Capture, Capture Test, and
 * Dual Edge Capture modes, any write to a CnV register is ignored. In output modes,
 * writing to a CnV register latches the value into a buffer. A CnV register is
 * updated with the value of its write buffer according to Registers updated from
 * write buffers. If FTMEN = 0, this write coherency mechanism may be manually
 * reset by writing to the CnSC register whether BDM mode is active or not.
 */
typedef union _hw_ftm_cnv
{
    uint32_t U;
    struct _hw_ftm_cnv_bitfields
    {
        uint32_t VAL : 16;             /*!< [15:0] Channel Value */
        uint32_t RESERVED0 : 16;       /*!< [31:16]  */
    } B;
} hw_ftm_cnv_t;

/*!
 * @name Constants and macros for entire FTM_CnV register
 */
/*@{*/
#define HW_FTM_CnV_COUNT (8U)

#define HW_FTM_CnV_ADDR(x, n)    ((x) + 0x10U + (0x8U * (n)))

#define HW_FTM_CnV(x, n)         (*(__IO hw_ftm_cnv_t *) HW_FTM_CnV_ADDR(x, n))
#define HW_FTM_CnV_RD(x, n)      (HW_FTM_CnV(x, n).U)
#define HW_FTM_CnV_WR(x, n, v)   (HW_FTM_CnV(x, n).U = (v))
#define HW_FTM_CnV_SET(x, n, v)  (HW_FTM_CnV_WR(x, n, HW_FTM_CnV_RD(x, n) |  (v)))
#define HW_FTM_CnV_CLR(x, n, v)  (HW_FTM_CnV_WR(x, n, HW_FTM_CnV_RD(x, n) & ~(v)))
#define HW_FTM_CnV_TOG(x, n, v)  (HW_FTM_CnV_WR(x, n, HW_FTM_CnV_RD(x, n) ^  (v)))
/*@}*/

/*
 * Constants & macros for individual FTM_CnV bitfields
 */

/*!
 * @name Register FTM_CnV, field VAL[15:0] (RW)
 *
 * Captured FTM counter value of the input modes or the match value for the
 * output modes
 */
/*@{*/
#define BP_FTM_CnV_VAL       (0U)          /*!< Bit position for FTM_CnV_VAL. */
#define BM_FTM_CnV_VAL       (0x0000FFFFU) /*!< Bit mask for FTM_CnV_VAL. */
#define BS_FTM_CnV_VAL       (16U)         /*!< Bit field size in bits for FTM_CnV_VAL. */

/*! @brief Read current value of the FTM_CnV_VAL field. */
#define BR_FTM_CnV_VAL(x, n) (HW_FTM_CnV(x, n).B.VAL)

/*! @brief Format value for bitfield FTM_CnV_VAL. */
#define BF_FTM_CnV_VAL(v)    ((uint32_t)((uint32_t)(v) << BP_FTM_CnV_VAL) & BM_FTM_CnV_VAL)

/*! @brief Set the VAL field to a new value. */
#define BW_FTM_CnV_VAL(x, n, v) (HW_FTM_CnV_WR(x, n, (HW_FTM_CnV_RD(x, n) & ~BM_FTM_CnV_VAL) | BF_FTM_CnV_VAL(v)))
/*@}*/

/*******************************************************************************
 * HW_FTM_CNTIN - Counter Initial Value
 ******************************************************************************/

/*!
 * @brief HW_FTM_CNTIN - Counter Initial Value (RW)
 *
 * Reset value: 0x00000000U
 *
 * The Counter Initial Value register contains the initial value for the FTM
 * counter. Writing to the CNTIN register latches the value into a buffer. The CNTIN
 * register is updated with the value of its write buffer according to Registers
 * updated from write buffers. When the FTM clock is initially selected, by
 * writing a non-zero value to the CLKS bits, the FTM counter starts with the value
 * 0x0000. To avoid this behavior, before the first write to select the FTM clock,
 * write the new value to the the CNTIN register and then initialize the FTM
 * counter by writing any value to the CNT register.
 */
typedef union _hw_ftm_cntin
{
    uint32_t U;
    struct _hw_ftm_cntin_bitfields
    {
        uint32_t INIT : 16;            /*!< [15:0]  */
        uint32_t RESERVED0 : 16;       /*!< [31:16]  */
    } B;
} hw_ftm_cntin_t;

/*!
 * @name Constants and macros for entire FTM_CNTIN register
 */
/*@{*/
#define HW_FTM_CNTIN_ADDR(x)     ((x) + 0x4CU)

#define HW_FTM_CNTIN(x)          (*(__IO hw_ftm_cntin_t *) HW_FTM_CNTIN_ADDR(x))
#define HW_FTM_CNTIN_RD(x)       (HW_FTM_CNTIN(x).U)
#define HW_FTM_CNTIN_WR(x, v)    (HW_FTM_CNTIN(x).U = (v))
#define HW_FTM_CNTIN_SET(x, v)   (HW_FTM_CNTIN_WR(x, HW_FTM_CNTIN_RD(x) |  (v)))
#define HW_FTM_CNTIN_CLR(x, v)   (HW_FTM_CNTIN_WR(x, HW_FTM_CNTIN_RD(x) & ~(v)))
#define HW_FTM_CNTIN_TOG(x, v)   (HW_FTM_CNTIN_WR(x, HW_FTM_CNTIN_RD(x) ^  (v)))
/*@}*/

/*
 * Constants & macros for individual FTM_CNTIN bitfields
 */

/*!
 * @name Register FTM_CNTIN, field INIT[15:0] (RW)
 *
 * Initial Value Of The FTM Counter
 */
/*@{*/
#define BP_FTM_CNTIN_INIT    (0U)          /*!< Bit position for FTM_CNTIN_INIT. */
#define BM_FTM_CNTIN_INIT    (0x0000FFFFU) /*!< Bit mask for FTM_CNTIN_INIT. */
#define BS_FTM_CNTIN_INIT    (16U)         /*!< Bit field size in bits for FTM_CNTIN_INIT. */

/*! @brief Read current value of the FTM_CNTIN_INIT field. */
#define BR_FTM_CNTIN_INIT(x) (HW_FTM_CNTIN(x).B.INIT)

/*! @brief Format value for bitfield FTM_CNTIN_INIT. */
#define BF_FTM_CNTIN_INIT(v) ((uint32_t)((uint32_t)(v) << BP_FTM_CNTIN_INIT) & BM_FTM_CNTIN_INIT)

/*! @brief Set the INIT field to a new value. */
#define BW_FTM_CNTIN_INIT(x, v) (HW_FTM_CNTIN_WR(x, (HW_FTM_CNTIN_RD(x) & ~BM_FTM_CNTIN_INIT) | BF_FTM_CNTIN_INIT(v)))
/*@}*/

/*******************************************************************************
 * HW_FTM_STATUS - Capture And Compare Status
 ******************************************************************************/

/*!
 * @brief HW_FTM_STATUS - Capture And Compare Status (RW)
 *
 * Reset value: 0x00000000U
 *
 * The STATUS register contains a copy of the status flag CHnF bit in CnSC for
 * each FTM channel for software convenience. Each CHnF bit in STATUS is a mirror
 * of CHnF bit in CnSC. All CHnF bits can be checked using only one read of
 * STATUS. All CHnF bits can be cleared by reading STATUS followed by writing 0x00 to
 * STATUS. Hardware sets the individual channel flags when an event occurs on the
 * channel. CHnF is cleared by reading STATUS while CHnF is set and then writing
 * a 0 to the CHnF bit. Writing a 1 to CHnF has no effect. If another event
 * occurs between the read and write operations, the write operation has no effect;
 * therefore, CHnF remains set indicating an event has occurred. In this case, a
 * CHnF interrupt request is not lost due to the clearing sequence for a previous
 * CHnF. The STATUS register should be used only in Combine mode.
 */
typedef union _hw_ftm_status
{
    uint32_t U;
    struct _hw_ftm_status_bitfields
    {
        uint32_t CH0F : 1;             /*!< [0] Channel 0 Flag */
        uint32_t CH1F : 1;             /*!< [1] Channel 1 Flag */
        uint32_t CH2F : 1;             /*!< [2] Channel 2 Flag */
        uint32_t CH3F : 1;             /*!< [3] Channel 3 Flag */
        uint32_t CH4F : 1;             /*!< [4] Channel 4 Flag */
        uint32_t CH5F : 1;             /*!< [5] Channel 5 Flag */
        uint32_t CH6F : 1;             /*!< [6] Channel 6 Flag */
        uint32_t CH7F : 1;             /*!< [7] Channel 7 Flag */
        uint32_t RESERVED0 : 24;       /*!< [31:8]  */
    } B;
} hw_ftm_status_t;

/*!
 * @name Constants and macros for entire FTM_STATUS register
 */
/*@{*/
#define HW_FTM_STATUS_ADDR(x)    ((x) + 0x50U)

#define HW_FTM_STATUS(x)         (*(__IO hw_ftm_status_t *) HW_FTM_STATUS_ADDR(x))
#define HW_FTM_STATUS_RD(x)      (HW_FTM_STATUS(x).U)
#define HW_FTM_STATUS_WR(x, v)   (HW_FTM_STATUS(x).U = (v))
#define HW_FTM_STATUS_SET(x, v)  (HW_FTM_STATUS_WR(x, HW_FTM_STATUS_RD(x) |  (v)))
#define HW_FTM_STATUS_CLR(x, v)  (HW_FTM_STATUS_WR(x, HW_FTM_STATUS_RD(x) & ~(v)))
#define HW_FTM_STATUS_TOG(x, v)  (HW_FTM_STATUS_WR(x, HW_FTM_STATUS_RD(x) ^  (v)))
/*@}*/

/*
 * Constants & macros for individual FTM_STATUS bitfields
 */

/*!
 * @name Register FTM_STATUS, field CH0F[0] (W1C)
 *
 * See the register description.
 *
 * Values:
 * - 0 - No channel event has occurred.
 * - 1 - A channel event has occurred.
 */
/*@{*/
#define BP_FTM_STATUS_CH0F   (0U)          /*!< Bit position for FTM_STATUS_CH0F. */
#define BM_FTM_STATUS_CH0F   (0x00000001U) /*!< Bit mask for FTM_STATUS_CH0F. */
#define BS_FTM_STATUS_CH0F   (1U)          /*!< Bit field size in bits for FTM_STATUS_CH0F. */

/*! @brief Read current value of the FTM_STATUS_CH0F field. */
#define BR_FTM_STATUS_CH0F(x) (BITBAND_ACCESS32(HW_FTM_STATUS_ADDR(x), BP_FTM_STATUS_CH0F))

/*! @brief Format value for bitfield FTM_STATUS_CH0F. */
#define BF_FTM_STATUS_CH0F(v) ((uint32_t)((uint32_t)(v) << BP_FTM_STATUS_CH0F) & BM_FTM_STATUS_CH0F)

/*! @brief Set the CH0F field to a new value. */
#define BW_FTM_STATUS_CH0F(x, v) (BITBAND_ACCESS32(HW_FTM_STATUS_ADDR(x), BP_FTM_STATUS_CH0F) = (v))
/*@}*/

/*!
 * @name Register FTM_STATUS, field CH1F[1] (W1C)
 *
 * See the register description.
 *
 * Values:
 * - 0 - No channel event has occurred.
 * - 1 - A channel event has occurred.
 */
/*@{*/
#define BP_FTM_STATUS_CH1F   (1U)          /*!< Bit position for FTM_STATUS_CH1F. */
#define BM_FTM_STATUS_CH1F   (0x00000002U) /*!< Bit mask for FTM_STATUS_CH1F. */
#define BS_FTM_STATUS_CH1F   (1U)          /*!< Bit field size in bits for FTM_STATUS_CH1F. */

/*! @brief Read current value of the FTM_STATUS_CH1F field. */
#define BR_FTM_STATUS_CH1F(x) (BITBAND_ACCESS32(HW_FTM_STATUS_ADDR(x), BP_FTM_STATUS_CH1F))

/*! @brief Format value for bitfield FTM_STATUS_CH1F. */
#define BF_FTM_STATUS_CH1F(v) ((uint32_t)((uint32_t)(v) << BP_FTM_STATUS_CH1F) & BM_FTM_STATUS_CH1F)

/*! @brief Set the CH1F field to a new value. */
#define BW_FTM_STATUS_CH1F(x, v) (BITBAND_ACCESS32(HW_FTM_STATUS_ADDR(x), BP_FTM_STATUS_CH1F) = (v))
/*@}*/

/*!
 * @name Register FTM_STATUS, field CH2F[2] (W1C)
 *
 * See the register description.
 *
 * Values:
 * - 0 - No channel event has occurred.
 * - 1 - A channel event has occurred.
 */
/*@{*/
#define BP_FTM_STATUS_CH2F   (2U)          /*!< Bit position for FTM_STATUS_CH2F. */
#define BM_FTM_STATUS_CH2F   (0x00000004U) /*!< Bit mask for FTM_STATUS_CH2F. */
#define BS_FTM_STATUS_CH2F   (1U)          /*!< Bit field size in bits for FTM_STATUS_CH2F. */

/*! @brief Read current value of the FTM_STATUS_CH2F field. */
#define BR_FTM_STATUS_CH2F(x) (BITBAND_ACCESS32(HW_FTM_STATUS_ADDR(x), BP_FTM_STATUS_CH2F))

/*! @brief Format value for bitfield FTM_STATUS_CH2F. */
#define BF_FTM_STATUS_CH2F(v) ((uint32_t)((uint32_t)(v) << BP_FTM_STATUS_CH2F) & BM_FTM_STATUS_CH2F)

/*! @brief Set the CH2F field to a new value. */
#define BW_FTM_STATUS_CH2F(x, v) (BITBAND_ACCESS32(HW_FTM_STATUS_ADDR(x), BP_FTM_STATUS_CH2F) = (v))
/*@}*/

/*!
 * @name Register FTM_STATUS, field CH3F[3] (W1C)
 *
 * See the register description.
 *
 * Values:
 * - 0 - No channel event has occurred.
 * - 1 - A channel event has occurred.
 */
/*@{*/
#define BP_FTM_STATUS_CH3F   (3U)          /*!< Bit position for FTM_STATUS_CH3F. */
#define BM_FTM_STATUS_CH3F   (0x00000008U) /*!< Bit mask for FTM_STATUS_CH3F. */
#define BS_FTM_STATUS_CH3F   (1U)          /*!< Bit field size in bits for FTM_STATUS_CH3F. */

/*! @brief Read current value of the FTM_STATUS_CH3F field. */
#define BR_FTM_STATUS_CH3F(x) (BITBAND_ACCESS32(HW_FTM_STATUS_ADDR(x), BP_FTM_STATUS_CH3F))

/*! @brief Format value for bitfield FTM_STATUS_CH3F. */
#define BF_FTM_STATUS_CH3F(v) ((uint32_t)((uint32_t)(v) << BP_FTM_STATUS_CH3F) & BM_FTM_STATUS_CH3F)

/*! @brief Set the CH3F field to a new value. */
#define BW_FTM_STATUS_CH3F(x, v) (BITBAND_ACCESS32(HW_FTM_STATUS_ADDR(x), BP_FTM_STATUS_CH3F) = (v))
/*@}*/

/*!
 * @name Register FTM_STATUS, field CH4F[4] (W1C)
 *
 * See the register description.
 *
 * Values:
 * - 0 - No channel event has occurred.
 * - 1 - A channel event has occurred.
 */
/*@{*/
#define BP_FTM_STATUS_CH4F   (4U)          /*!< Bit position for FTM_STATUS_CH4F. */
#define BM_FTM_STATUS_CH4F   (0x00000010U) /*!< Bit mask for FTM_STATUS_CH4F. */
#define BS_FTM_STATUS_CH4F   (1U)          /*!< Bit field size in bits for FTM_STATUS_CH4F. */

/*! @brief Read current value of the FTM_STATUS_CH4F field. */
#define BR_FTM_STATUS_CH4F(x) (BITBAND_ACCESS32(HW_FTM_STATUS_ADDR(x), BP_FTM_STATUS_CH4F))

/*! @brief Format value for bitfield FTM_STATUS_CH4F. */
#define BF_FTM_STATUS_CH4F(v) ((uint32_t)((uint32_t)(v) << BP_FTM_STATUS_CH4F) & BM_FTM_STATUS_CH4F)

/*! @brief Set the CH4F field to a new value. */
#define BW_FTM_STATUS_CH4F(x, v) (BITBAND_ACCESS32(HW_FTM_STATUS_ADDR(x), BP_FTM_STATUS_CH4F) = (v))
/*@}*/

/*!
 * @name Register FTM_STATUS, field CH5F[5] (W1C)
 *
 * See the register description.
 *
 * Values:
 * - 0 - No channel event has occurred.
 * - 1 - A channel event has occurred.
 */
/*@{*/
#define BP_FTM_STATUS_CH5F   (5U)          /*!< Bit position for FTM_STATUS_CH5F. */
#define BM_FTM_STATUS_CH5F   (0x00000020U) /*!< Bit mask for FTM_STATUS_CH5F. */
#define BS_FTM_STATUS_CH5F   (1U)          /*!< Bit field size in bits for FTM_STATUS_CH5F. */

/*! @brief Read current value of the FTM_STATUS_CH5F field. */
#define BR_FTM_STATUS_CH5F(x) (BITBAND_ACCESS32(HW_FTM_STATUS_ADDR(x), BP_FTM_STATUS_CH5F))

/*! @brief Format value for bitfield FTM_STATUS_CH5F. */
#define BF_FTM_STATUS_CH5F(v) ((uint32_t)((uint32_t)(v) << BP_FTM_STATUS_CH5F) & BM_FTM_STATUS_CH5F)

/*! @brief Set the CH5F field to a new value. */
#define BW_FTM_STATUS_CH5F(x, v) (BITBAND_ACCESS32(HW_FTM_STATUS_ADDR(x), BP_FTM_STATUS_CH5F) = (v))
/*@}*/

/*!
 * @name Register FTM_STATUS, field CH6F[6] (W1C)
 *
 * See the register description.
 *
 * Values:
 * - 0 - No channel event has occurred.
 * - 1 - A channel event has occurred.
 */
/*@{*/
#define BP_FTM_STATUS_CH6F   (6U)          /*!< Bit position for FTM_STATUS_CH6F. */
#define BM_FTM_STATUS_CH6F   (0x00000040U) /*!< Bit mask for FTM_STATUS_CH6F. */
#define BS_FTM_STATUS_CH6F   (1U)          /*!< Bit field size in bits for FTM_STATUS_CH6F. */

/*! @brief Read current value of the FTM_STATUS_CH6F field. */
#define BR_FTM_STATUS_CH6F(x) (BITBAND_ACCESS32(HW_FTM_STATUS_ADDR(x), BP_FTM_STATUS_CH6F))

/*! @brief Format value for bitfield FTM_STATUS_CH6F. */
#define BF_FTM_STATUS_CH6F(v) ((uint32_t)((uint32_t)(v) << BP_FTM_STATUS_CH6F) & BM_FTM_STATUS_CH6F)

/*! @brief Set the CH6F field to a new value. */
#define BW_FTM_STATUS_CH6F(x, v) (BITBAND_ACCESS32(HW_FTM_STATUS_ADDR(x), BP_FTM_STATUS_CH6F) = (v))
/*@}*/

/*!
 * @name Register FTM_STATUS, field CH7F[7] (W1C)
 *
 * See the register description.
 *
 * Values:
 * - 0 - No channel event has occurred.
 * - 1 - A channel event has occurred.
 */
/*@{*/
#define BP_FTM_STATUS_CH7F   (7U)          /*!< Bit position for FTM_STATUS_CH7F. */
#define BM_FTM_STATUS_CH7F   (0x00000080U) /*!< Bit mask for FTM_STATUS_CH7F. */
#define BS_FTM_STATUS_CH7F   (1U)          /*!< Bit field size in bits for FTM_STATUS_CH7F. */

/*! @brief Read current value of the FTM_STATUS_CH7F field. */
#define BR_FTM_STATUS_CH7F(x) (BITBAND_ACCESS32(HW_FTM_STATUS_ADDR(x), BP_FTM_STATUS_CH7F))

/*! @brief Format value for bitfield FTM_STATUS_CH7F. */
#define BF_FTM_STATUS_CH7F(v) ((uint32_t)((uint32_t)(v) << BP_FTM_STATUS_CH7F) & BM_FTM_STATUS_CH7F)

/*! @brief Set the CH7F field to a new value. */
#define BW_FTM_STATUS_CH7F(x, v) (BITBAND_ACCESS32(HW_FTM_STATUS_ADDR(x), BP_FTM_STATUS_CH7F) = (v))
/*@}*/

/*******************************************************************************
 * HW_FTM_MODE - Features Mode Selection
 ******************************************************************************/

/*!
 * @brief HW_FTM_MODE - Features Mode Selection (RW)
 *
 * Reset value: 0x00000004U
 *
 * This register contains the global enable bit for FTM-specific features and
 * the control bits used to configure: Fault control mode and interrupt Capture
 * Test mode PWM synchronization Write protection Channel output initialization
 * These controls relate to all channels within this module.
 */
typedef union _hw_ftm_mode
{
    uint32_t U;
    struct _hw_ftm_mode_bitfields
    {
        uint32_t FTMEN : 1;            /*!< [0] FTM Enable */
        uint32_t INIT : 1;             /*!< [1] Initialize The Channels Output */
        uint32_t WPDIS : 1;            /*!< [2] Write Protection Disable */
        uint32_t PWMSYNC : 1;          /*!< [3] PWM Synchronization Mode */
        uint32_t CAPTEST : 1;          /*!< [4] Capture Test Mode Enable */
        uint32_t FAULTM : 2;           /*!< [6:5] Fault Control Mode */
        uint32_t FAULTIE : 1;          /*!< [7] Fault Interrupt Enable */
        uint32_t RESERVED0 : 24;       /*!< [31:8]  */
    } B;
} hw_ftm_mode_t;

/*!
 * @name Constants and macros for entire FTM_MODE register
 */
/*@{*/
#define HW_FTM_MODE_ADDR(x)      ((x) + 0x54U)

#define HW_FTM_MODE(x)           (*(__IO hw_ftm_mode_t *) HW_FTM_MODE_ADDR(x))
#define HW_FTM_MODE_RD(x)        (HW_FTM_MODE(x).U)
#define HW_FTM_MODE_WR(x, v)     (HW_FTM_MODE(x).U = (v))
#define HW_FTM_MODE_SET(x, v)    (HW_FTM_MODE_WR(x, HW_FTM_MODE_RD(x) |  (v)))
#define HW_FTM_MODE_CLR(x, v)    (HW_FTM_MODE_WR(x, HW_FTM_MODE_RD(x) & ~(v)))
#define HW_FTM_MODE_TOG(x, v)    (HW_FTM_MODE_WR(x, HW_FTM_MODE_RD(x) ^  (v)))
/*@}*/

/*
 * Constants & macros for individual FTM_MODE bitfields
 */

/*!
 * @name Register FTM_MODE, field FTMEN[0] (RW)
 *
 * This field is write protected. It can be written only when MODE[WPDIS] = 1.
 *
 * Values:
 * - 0 - Only the TPM-compatible registers (first set of registers) can be used
 *     without any restriction. Do not use the FTM-specific registers.
 * - 1 - All registers including the FTM-specific registers (second set of
 *     registers) are available for use with no restrictions.
 */
/*@{*/
#define BP_FTM_MODE_FTMEN    (0U)          /*!< Bit position for FTM_MODE_FTMEN. */
#define BM_FTM_MODE_FTMEN    (0x00000001U) /*!< Bit mask for FTM_MODE_FTMEN. */
#define BS_FTM_MODE_FTMEN    (1U)          /*!< Bit field size in bits for FTM_MODE_FTMEN. */

/*! @brief Read current value of the FTM_MODE_FTMEN field. */
#define BR_FTM_MODE_FTMEN(x) (BITBAND_ACCESS32(HW_FTM_MODE_ADDR(x), BP_FTM_MODE_FTMEN))

/*! @brief Format value for bitfield FTM_MODE_FTMEN. */
#define BF_FTM_MODE_FTMEN(v) ((uint32_t)((uint32_t)(v) << BP_FTM_MODE_FTMEN) & BM_FTM_MODE_FTMEN)

/*! @brief Set the FTMEN field to a new value. */
#define BW_FTM_MODE_FTMEN(x, v) (BITBAND_ACCESS32(HW_FTM_MODE_ADDR(x), BP_FTM_MODE_FTMEN) = (v))
/*@}*/

/*!
 * @name Register FTM_MODE, field INIT[1] (RW)
 *
 * When a 1 is written to INIT bit the channels output is initialized according
 * to the state of their corresponding bit in the OUTINIT register. Writing a 0
 * to INIT bit has no effect. The INIT bit is always read as 0.
 */
/*@{*/
#define BP_FTM_MODE_INIT     (1U)          /*!< Bit position for FTM_MODE_INIT. */
#define BM_FTM_MODE_INIT     (0x00000002U) /*!< Bit mask for FTM_MODE_INIT. */
#define BS_FTM_MODE_INIT     (1U)          /*!< Bit field size in bits for FTM_MODE_INIT. */

/*! @brief Read current value of the FTM_MODE_INIT field. */
#define BR_FTM_MODE_INIT(x)  (BITBAND_ACCESS32(HW_FTM_MODE_ADDR(x), BP_FTM_MODE_INIT))

/*! @brief Format value for bitfield FTM_MODE_INIT. */
#define BF_FTM_MODE_INIT(v)  ((uint32_t)((uint32_t)(v) << BP_FTM_MODE_INIT) & BM_FTM_MODE_INIT)

/*! @brief Set the INIT field to a new value. */
#define BW_FTM_MODE_INIT(x, v) (BITBAND_ACCESS32(HW_FTM_MODE_ADDR(x), BP_FTM_MODE_INIT) = (v))
/*@}*/

/*!
 * @name Register FTM_MODE, field WPDIS[2] (RW)
 *
 * When write protection is enabled (WPDIS = 0), write protected bits cannot be
 * written. When write protection is disabled (WPDIS = 1), write protected bits
 * can be written. The WPDIS bit is the negation of the WPEN bit. WPDIS is cleared
 * when 1 is written to WPEN. WPDIS is set when WPEN bit is read as a 1 and then
 * 1 is written to WPDIS. Writing 0 to WPDIS has no effect.
 *
 * Values:
 * - 0 - Write protection is enabled.
 * - 1 - Write protection is disabled.
 */
/*@{*/
#define BP_FTM_MODE_WPDIS    (2U)          /*!< Bit position for FTM_MODE_WPDIS. */
#define BM_FTM_MODE_WPDIS    (0x00000004U) /*!< Bit mask for FTM_MODE_WPDIS. */
#define BS_FTM_MODE_WPDIS    (1U)          /*!< Bit field size in bits for FTM_MODE_WPDIS. */

/*! @brief Read current value of the FTM_MODE_WPDIS field. */
#define BR_FTM_MODE_WPDIS(x) (BITBAND_ACCESS32(HW_FTM_MODE_ADDR(x), BP_FTM_MODE_WPDIS))

/*! @brief Format value for bitfield FTM_MODE_WPDIS. */
#define BF_FTM_MODE_WPDIS(v) ((uint32_t)((uint32_t)(v) << BP_FTM_MODE_WPDIS) & BM_FTM_MODE_WPDIS)

/*! @brief Set the WPDIS field to a new value. */
#define BW_FTM_MODE_WPDIS(x, v) (BITBAND_ACCESS32(HW_FTM_MODE_ADDR(x), BP_FTM_MODE_WPDIS) = (v))
/*@}*/

/*!
 * @name Register FTM_MODE, field PWMSYNC[3] (RW)
 *
 * Selects which triggers can be used by MOD, CnV, OUTMASK, and FTM counter
 * synchronization. See PWM synchronization. The PWMSYNC bit configures the
 * synchronization when SYNCMODE is 0.
 *
 * Values:
 * - 0 - No restrictions. Software and hardware triggers can be used by MOD,
 *     CnV, OUTMASK, and FTM counter synchronization.
 * - 1 - Software trigger can only be used by MOD and CnV synchronization, and
 *     hardware triggers can only be used by OUTMASK and FTM counter
 *     synchronization.
 */
/*@{*/
#define BP_FTM_MODE_PWMSYNC  (3U)          /*!< Bit position for FTM_MODE_PWMSYNC. */
#define BM_FTM_MODE_PWMSYNC  (0x00000008U) /*!< Bit mask for FTM_MODE_PWMSYNC. */
#define BS_FTM_MODE_PWMSYNC  (1U)          /*!< Bit field size in bits for FTM_MODE_PWMSYNC. */

/*! @brief Read current value of the FTM_MODE_PWMSYNC field. */
#define BR_FTM_MODE_PWMSYNC(x) (BITBAND_ACCESS32(HW_FTM_MODE_ADDR(x), BP_FTM_MODE_PWMSYNC))

/*! @brief Format value for bitfield FTM_MODE_PWMSYNC. */
#define BF_FTM_MODE_PWMSYNC(v) ((uint32_t)((uint32_t)(v) << BP_FTM_MODE_PWMSYNC) & BM_FTM_MODE_PWMSYNC)

/*! @brief Set the PWMSYNC field to a new value. */
#define BW_FTM_MODE_PWMSYNC(x, v) (BITBAND_ACCESS32(HW_FTM_MODE_ADDR(x), BP_FTM_MODE_PWMSYNC) = (v))
/*@}*/

/*!
 * @name Register FTM_MODE, field CAPTEST[4] (RW)
 *
 * Enables the capture test mode. This field is write protected. It can be
 * written only when MODE[WPDIS] = 1.
 *
 * Values:
 * - 0 - Capture test mode is disabled.
 * - 1 - Capture test mode is enabled.
 */
/*@{*/
#define BP_FTM_MODE_CAPTEST  (4U)          /*!< Bit position for FTM_MODE_CAPTEST. */
#define BM_FTM_MODE_CAPTEST  (0x00000010U) /*!< Bit mask for FTM_MODE_CAPTEST. */
#define BS_FTM_MODE_CAPTEST  (1U)          /*!< Bit field size in bits for FTM_MODE_CAPTEST. */

/*! @brief Read current value of the FTM_MODE_CAPTEST field. */
#define BR_FTM_MODE_CAPTEST(x) (BITBAND_ACCESS32(HW_FTM_MODE_ADDR(x), BP_FTM_MODE_CAPTEST))

/*! @brief Format value for bitfield FTM_MODE_CAPTEST. */
#define BF_FTM_MODE_CAPTEST(v) ((uint32_t)((uint32_t)(v) << BP_FTM_MODE_CAPTEST) & BM_FTM_MODE_CAPTEST)

/*! @brief Set the CAPTEST field to a new value. */
#define BW_FTM_MODE_CAPTEST(x, v) (BITBAND_ACCESS32(HW_FTM_MODE_ADDR(x), BP_FTM_MODE_CAPTEST) = (v))
/*@}*/

/*!
 * @name Register FTM_MODE, field FAULTM[6:5] (RW)
 *
 * Defines the FTM fault control mode. This field is write protected. It can be
 * written only when MODE[WPDIS] = 1.
 *
 * Values:
 * - 00 - Fault control is disabled for all channels.
 * - 01 - Fault control is enabled for even channels only (channels 0, 2, 4, and
 *     6), and the selected mode is the manual fault clearing.
 * - 10 - Fault control is enabled for all channels, and the selected mode is
 *     the manual fault clearing.
 * - 11 - Fault control is enabled for all channels, and the selected mode is
 *     the automatic fault clearing.
 */
/*@{*/
#define BP_FTM_MODE_FAULTM   (5U)          /*!< Bit position for FTM_MODE_FAULTM. */
#define BM_FTM_MODE_FAULTM   (0x00000060U) /*!< Bit mask for FTM_MODE_FAULTM. */
#define BS_FTM_MODE_FAULTM   (2U)          /*!< Bit field size in bits for FTM_MODE_FAULTM. */

/*! @brief Read current value of the FTM_MODE_FAULTM field. */
#define BR_FTM_MODE_FAULTM(x) (HW_FTM_MODE(x).B.FAULTM)

/*! @brief Format value for bitfield FTM_MODE_FAULTM. */
#define BF_FTM_MODE_FAULTM(v) ((uint32_t)((uint32_t)(v) << BP_FTM_MODE_FAULTM) & BM_FTM_MODE_FAULTM)

/*! @brief Set the FAULTM field to a new value. */
#define BW_FTM_MODE_FAULTM(x, v) (HW_FTM_MODE_WR(x, (HW_FTM_MODE_RD(x) & ~BM_FTM_MODE_FAULTM) | BF_FTM_MODE_FAULTM(v)))
/*@}*/

/*!
 * @name Register FTM_MODE, field FAULTIE[7] (RW)
 *
 * Enables the generation of an interrupt when a fault is detected by FTM and
 * the FTM fault control is enabled.
 *
 * Values:
 * - 0 - Fault control interrupt is disabled.
 * - 1 - Fault control interrupt is enabled.
 */
/*@{*/
#define BP_FTM_MODE_FAULTIE  (7U)          /*!< Bit position for FTM_MODE_FAULTIE. */
#define BM_FTM_MODE_FAULTIE  (0x00000080U) /*!< Bit mask for FTM_MODE_FAULTIE. */
#define BS_FTM_MODE_FAULTIE  (1U)          /*!< Bit field size in bits for FTM_MODE_FAULTIE. */

/*! @brief Read current value of the FTM_MODE_FAULTIE field. */
#define BR_FTM_MODE_FAULTIE(x) (BITBAND_ACCESS32(HW_FTM_MODE_ADDR(x), BP_FTM_MODE_FAULTIE))

/*! @brief Format value for bitfield FTM_MODE_FAULTIE. */
#define BF_FTM_MODE_FAULTIE(v) ((uint32_t)((uint32_t)(v) << BP_FTM_MODE_FAULTIE) & BM_FTM_MODE_FAULTIE)

/*! @brief Set the FAULTIE field to a new value. */
#define BW_FTM_MODE_FAULTIE(x, v) (BITBAND_ACCESS32(HW_FTM_MODE_ADDR(x), BP_FTM_MODE_FAULTIE) = (v))
/*@}*/

/*******************************************************************************
 * HW_FTM_SYNC - Synchronization
 ******************************************************************************/

/*!
 * @brief HW_FTM_SYNC - Synchronization (RW)
 *
 * Reset value: 0x00000000U
 *
 * This register configures the PWM synchronization. A synchronization event can
 * perform the synchronized update of MOD, CV, and OUTMASK registers with the
 * value of their write buffer and the FTM counter initialization. The software
 * trigger, SWSYNC bit, and hardware triggers TRIG0, TRIG1, and TRIG2 bits have a
 * potential conflict if used together when SYNCMODE = 0. Use only hardware or
 * software triggers but not both at the same time, otherwise unpredictable behavior
 * is likely to happen. The selection of the loading point, CNTMAX and CNTMIN
 * bits, is intended to provide the update of MOD, CNTIN, and CnV registers across
 * all enabled channels simultaneously. The use of the loading point selection
 * together with SYNCMODE = 0 and hardware trigger selection, TRIG0, TRIG1, or TRIG2
 * bits, is likely to result in unpredictable behavior. The synchronization
 * event selection also depends on the PWMSYNC (MODE register) and SYNCMODE (SYNCONF
 * register) bits. See PWM synchronization.
 */
typedef union _hw_ftm_sync
{
    uint32_t U;
    struct _hw_ftm_sync_bitfields
    {
        uint32_t CNTMIN : 1;           /*!< [0] Minimum Loading Point Enable */
        uint32_t CNTMAX : 1;           /*!< [1] Maximum Loading Point Enable */
        uint32_t REINIT : 1;           /*!< [2] FTM Counter Reinitialization By
                                        * Synchronization (FTM counter synchronization) */
        uint32_t SYNCHOM : 1;          /*!< [3] Output Mask Synchronization */
        uint32_t TRIG0 : 1;            /*!< [4] PWM Synchronization Hardware Trigger 0 */
        uint32_t TRIG1 : 1;            /*!< [5] PWM Synchronization Hardware Trigger 1 */
        uint32_t TRIG2 : 1;            /*!< [6] PWM Synchronization Hardware Trigger 2 */
        uint32_t SWSYNC : 1;           /*!< [7] PWM Synchronization Software Trigger */
        uint32_t RESERVED0 : 24;       /*!< [31:8]  */
    } B;
} hw_ftm_sync_t;

/*!
 * @name Constants and macros for entire FTM_SYNC register
 */
/*@{*/
#define HW_FTM_SYNC_ADDR(x)      ((x) + 0x58U)

#define HW_FTM_SYNC(x)           (*(__IO hw_ftm_sync_t *) HW_FTM_SYNC_ADDR(x))
#define HW_FTM_SYNC_RD(x)        (HW_FTM_SYNC(x).U)
#define HW_FTM_SYNC_WR(x, v)     (HW_FTM_SYNC(x).U = (v))
#define HW_FTM_SYNC_SET(x, v)    (HW_FTM_SYNC_WR(x, HW_FTM_SYNC_RD(x) |  (v)))
#define HW_FTM_SYNC_CLR(x, v)    (HW_FTM_SYNC_WR(x, HW_FTM_SYNC_RD(x) & ~(v)))
#define HW_FTM_SYNC_TOG(x, v)    (HW_FTM_SYNC_WR(x, HW_FTM_SYNC_RD(x) ^  (v)))
/*@}*/

/*
 * Constants & macros for individual FTM_SYNC bitfields
 */

/*!
 * @name Register FTM_SYNC, field CNTMIN[0] (RW)
 *
 * Selects the minimum loading point to PWM synchronization. See Boundary cycle
 * and loading points. If CNTMIN is one, the selected loading point is when the
 * FTM counter reaches its minimum value (CNTIN register).
 *
 * Values:
 * - 0 - The minimum loading point is disabled.
 * - 1 - The minimum loading point is enabled.
 */
/*@{*/
#define BP_FTM_SYNC_CNTMIN   (0U)          /*!< Bit position for FTM_SYNC_CNTMIN. */
#define BM_FTM_SYNC_CNTMIN   (0x00000001U) /*!< Bit mask for FTM_SYNC_CNTMIN. */
#define BS_FTM_SYNC_CNTMIN   (1U)          /*!< Bit field size in bits for FTM_SYNC_CNTMIN. */

/*! @brief Read current value of the FTM_SYNC_CNTMIN field. */
#define BR_FTM_SYNC_CNTMIN(x) (BITBAND_ACCESS32(HW_FTM_SYNC_ADDR(x), BP_FTM_SYNC_CNTMIN))

/*! @brief Format value for bitfield FTM_SYNC_CNTMIN. */
#define BF_FTM_SYNC_CNTMIN(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SYNC_CNTMIN) & BM_FTM_SYNC_CNTMIN)

/*! @brief Set the CNTMIN field to a new value. */
#define BW_FTM_SYNC_CNTMIN(x, v) (BITBAND_ACCESS32(HW_FTM_SYNC_ADDR(x), BP_FTM_SYNC_CNTMIN) = (v))
/*@}*/

/*!
 * @name Register FTM_SYNC, field CNTMAX[1] (RW)
 *
 * Selects the maximum loading point to PWM synchronization. See Boundary cycle
 * and loading points. If CNTMAX is 1, the selected loading point is when the FTM
 * counter reaches its maximum value (MOD register).
 *
 * Values:
 * - 0 - The maximum loading point is disabled.
 * - 1 - The maximum loading point is enabled.
 */
/*@{*/
#define BP_FTM_SYNC_CNTMAX   (1U)          /*!< Bit position for FTM_SYNC_CNTMAX. */
#define BM_FTM_SYNC_CNTMAX   (0x00000002U) /*!< Bit mask for FTM_SYNC_CNTMAX. */
#define BS_FTM_SYNC_CNTMAX   (1U)          /*!< Bit field size in bits for FTM_SYNC_CNTMAX. */

/*! @brief Read current value of the FTM_SYNC_CNTMAX field. */
#define BR_FTM_SYNC_CNTMAX(x) (BITBAND_ACCESS32(HW_FTM_SYNC_ADDR(x), BP_FTM_SYNC_CNTMAX))

/*! @brief Format value for bitfield FTM_SYNC_CNTMAX. */
#define BF_FTM_SYNC_CNTMAX(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SYNC_CNTMAX) & BM_FTM_SYNC_CNTMAX)

/*! @brief Set the CNTMAX field to a new value. */
#define BW_FTM_SYNC_CNTMAX(x, v) (BITBAND_ACCESS32(HW_FTM_SYNC_ADDR(x), BP_FTM_SYNC_CNTMAX) = (v))
/*@}*/

/*!
 * @name Register FTM_SYNC, field REINIT[2] (RW)
 *
 * Determines if the FTM counter is reinitialized when the selected trigger for
 * the synchronization is detected. The REINIT bit configures the synchronization
 * when SYNCMODE is zero.
 *
 * Values:
 * - 0 - FTM counter continues to count normally.
 * - 1 - FTM counter is updated with its initial value when the selected trigger
 *     is detected.
 */
/*@{*/
#define BP_FTM_SYNC_REINIT   (2U)          /*!< Bit position for FTM_SYNC_REINIT. */
#define BM_FTM_SYNC_REINIT   (0x00000004U) /*!< Bit mask for FTM_SYNC_REINIT. */
#define BS_FTM_SYNC_REINIT   (1U)          /*!< Bit field size in bits for FTM_SYNC_REINIT. */

/*! @brief Read current value of the FTM_SYNC_REINIT field. */
#define BR_FTM_SYNC_REINIT(x) (BITBAND_ACCESS32(HW_FTM_SYNC_ADDR(x), BP_FTM_SYNC_REINIT))

/*! @brief Format value for bitfield FTM_SYNC_REINIT. */
#define BF_FTM_SYNC_REINIT(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SYNC_REINIT) & BM_FTM_SYNC_REINIT)

/*! @brief Set the REINIT field to a new value. */
#define BW_FTM_SYNC_REINIT(x, v) (BITBAND_ACCESS32(HW_FTM_SYNC_ADDR(x), BP_FTM_SYNC_REINIT) = (v))
/*@}*/

/*!
 * @name Register FTM_SYNC, field SYNCHOM[3] (RW)
 *
 * Selects when the OUTMASK register is updated with the value of its buffer.
 *
 * Values:
 * - 0 - OUTMASK register is updated with the value of its buffer in all rising
 *     edges of the system clock.
 * - 1 - OUTMASK register is updated with the value of its buffer only by the
 *     PWM synchronization.
 */
/*@{*/
#define BP_FTM_SYNC_SYNCHOM  (3U)          /*!< Bit position for FTM_SYNC_SYNCHOM. */
#define BM_FTM_SYNC_SYNCHOM  (0x00000008U) /*!< Bit mask for FTM_SYNC_SYNCHOM. */
#define BS_FTM_SYNC_SYNCHOM  (1U)          /*!< Bit field size in bits for FTM_SYNC_SYNCHOM. */

/*! @brief Read current value of the FTM_SYNC_SYNCHOM field. */
#define BR_FTM_SYNC_SYNCHOM(x) (BITBAND_ACCESS32(HW_FTM_SYNC_ADDR(x), BP_FTM_SYNC_SYNCHOM))

/*! @brief Format value for bitfield FTM_SYNC_SYNCHOM. */
#define BF_FTM_SYNC_SYNCHOM(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SYNC_SYNCHOM) & BM_FTM_SYNC_SYNCHOM)

/*! @brief Set the SYNCHOM field to a new value. */
#define BW_FTM_SYNC_SYNCHOM(x, v) (BITBAND_ACCESS32(HW_FTM_SYNC_ADDR(x), BP_FTM_SYNC_SYNCHOM) = (v))
/*@}*/

/*!
 * @name Register FTM_SYNC, field TRIG0[4] (RW)
 *
 * Enables hardware trigger 0 to the PWM synchronization. Hardware trigger 0
 * occurs when a rising edge is detected at the trigger 0 input signal.
 *
 * Values:
 * - 0 - Trigger is disabled.
 * - 1 - Trigger is enabled.
 */
/*@{*/
#define BP_FTM_SYNC_TRIG0    (4U)          /*!< Bit position for FTM_SYNC_TRIG0. */
#define BM_FTM_SYNC_TRIG0    (0x00000010U) /*!< Bit mask for FTM_SYNC_TRIG0. */
#define BS_FTM_SYNC_TRIG0    (1U)          /*!< Bit field size in bits for FTM_SYNC_TRIG0. */

/*! @brief Read current value of the FTM_SYNC_TRIG0 field. */
#define BR_FTM_SYNC_TRIG0(x) (BITBAND_ACCESS32(HW_FTM_SYNC_ADDR(x), BP_FTM_SYNC_TRIG0))

/*! @brief Format value for bitfield FTM_SYNC_TRIG0. */
#define BF_FTM_SYNC_TRIG0(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SYNC_TRIG0) & BM_FTM_SYNC_TRIG0)

/*! @brief Set the TRIG0 field to a new value. */
#define BW_FTM_SYNC_TRIG0(x, v) (BITBAND_ACCESS32(HW_FTM_SYNC_ADDR(x), BP_FTM_SYNC_TRIG0) = (v))
/*@}*/

/*!
 * @name Register FTM_SYNC, field TRIG1[5] (RW)
 *
 * Enables hardware trigger 1 to the PWM synchronization. Hardware trigger 1
 * happens when a rising edge is detected at the trigger 1 input signal.
 *
 * Values:
 * - 0 - Trigger is disabled.
 * - 1 - Trigger is enabled.
 */
/*@{*/
#define BP_FTM_SYNC_TRIG1    (5U)          /*!< Bit position for FTM_SYNC_TRIG1. */
#define BM_FTM_SYNC_TRIG1    (0x00000020U) /*!< Bit mask for FTM_SYNC_TRIG1. */
#define BS_FTM_SYNC_TRIG1    (1U)          /*!< Bit field size in bits for FTM_SYNC_TRIG1. */

/*! @brief Read current value of the FTM_SYNC_TRIG1 field. */
#define BR_FTM_SYNC_TRIG1(x) (BITBAND_ACCESS32(HW_FTM_SYNC_ADDR(x), BP_FTM_SYNC_TRIG1))

/*! @brief Format value for bitfield FTM_SYNC_TRIG1. */
#define BF_FTM_SYNC_TRIG1(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SYNC_TRIG1) & BM_FTM_SYNC_TRIG1)

/*! @brief Set the TRIG1 field to a new value. */
#define BW_FTM_SYNC_TRIG1(x, v) (BITBAND_ACCESS32(HW_FTM_SYNC_ADDR(x), BP_FTM_SYNC_TRIG1) = (v))
/*@}*/

/*!
 * @name Register FTM_SYNC, field TRIG2[6] (RW)
 *
 * Enables hardware trigger 2 to the PWM synchronization. Hardware trigger 2
 * happens when a rising edge is detected at the trigger 2 input signal.
 *
 * Values:
 * - 0 - Trigger is disabled.
 * - 1 - Trigger is enabled.
 */
/*@{*/
#define BP_FTM_SYNC_TRIG2    (6U)          /*!< Bit position for FTM_SYNC_TRIG2. */
#define BM_FTM_SYNC_TRIG2    (0x00000040U) /*!< Bit mask for FTM_SYNC_TRIG2. */
#define BS_FTM_SYNC_TRIG2    (1U)          /*!< Bit field size in bits for FTM_SYNC_TRIG2. */

/*! @brief Read current value of the FTM_SYNC_TRIG2 field. */
#define BR_FTM_SYNC_TRIG2(x) (BITBAND_ACCESS32(HW_FTM_SYNC_ADDR(x), BP_FTM_SYNC_TRIG2))

/*! @brief Format value for bitfield FTM_SYNC_TRIG2. */
#define BF_FTM_SYNC_TRIG2(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SYNC_TRIG2) & BM_FTM_SYNC_TRIG2)

/*! @brief Set the TRIG2 field to a new value. */
#define BW_FTM_SYNC_TRIG2(x, v) (BITBAND_ACCESS32(HW_FTM_SYNC_ADDR(x), BP_FTM_SYNC_TRIG2) = (v))
/*@}*/

/*!
 * @name Register FTM_SYNC, field SWSYNC[7] (RW)
 *
 * Selects the software trigger as the PWM synchronization trigger. The software
 * trigger happens when a 1 is written to SWSYNC bit.
 *
 * Values:
 * - 0 - Software trigger is not selected.
 * - 1 - Software trigger is selected.
 */
/*@{*/
#define BP_FTM_SYNC_SWSYNC   (7U)          /*!< Bit position for FTM_SYNC_SWSYNC. */
#define BM_FTM_SYNC_SWSYNC   (0x00000080U) /*!< Bit mask for FTM_SYNC_SWSYNC. */
#define BS_FTM_SYNC_SWSYNC   (1U)          /*!< Bit field size in bits for FTM_SYNC_SWSYNC. */

/*! @brief Read current value of the FTM_SYNC_SWSYNC field. */
#define BR_FTM_SYNC_SWSYNC(x) (BITBAND_ACCESS32(HW_FTM_SYNC_ADDR(x), BP_FTM_SYNC_SWSYNC))

/*! @brief Format value for bitfield FTM_SYNC_SWSYNC. */
#define BF_FTM_SYNC_SWSYNC(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SYNC_SWSYNC) & BM_FTM_SYNC_SWSYNC)

/*! @brief Set the SWSYNC field to a new value. */
#define BW_FTM_SYNC_SWSYNC(x, v) (BITBAND_ACCESS32(HW_FTM_SYNC_ADDR(x), BP_FTM_SYNC_SWSYNC) = (v))
/*@}*/

/*******************************************************************************
 * HW_FTM_OUTINIT - Initial State For Channels Output
 ******************************************************************************/

/*!
 * @brief HW_FTM_OUTINIT - Initial State For Channels Output (RW)
 *
 * Reset value: 0x00000000U
 */
typedef union _hw_ftm_outinit
{
    uint32_t U;
    struct _hw_ftm_outinit_bitfields
    {
        uint32_t CH0OI : 1;            /*!< [0] Channel 0 Output Initialization Value */
        uint32_t CH1OI : 1;            /*!< [1] Channel 1 Output Initialization Value */
        uint32_t CH2OI : 1;            /*!< [2] Channel 2 Output Initialization Value */
        uint32_t CH3OI : 1;            /*!< [3] Channel 3 Output Initialization Value */
        uint32_t CH4OI : 1;            /*!< [4] Channel 4 Output Initialization Value */
        uint32_t CH5OI : 1;            /*!< [5] Channel 5 Output Initialization Value */
        uint32_t CH6OI : 1;            /*!< [6] Channel 6 Output Initialization Value */
        uint32_t CH7OI : 1;            /*!< [7] Channel 7 Output Initialization Value */
        uint32_t RESERVED0 : 24;       /*!< [31:8]  */
    } B;
} hw_ftm_outinit_t;

/*!
 * @name Constants and macros for entire FTM_OUTINIT register
 */
/*@{*/
#define HW_FTM_OUTINIT_ADDR(x)   ((x) + 0x5CU)

#define HW_FTM_OUTINIT(x)        (*(__IO hw_ftm_outinit_t *) HW_FTM_OUTINIT_ADDR(x))
#define HW_FTM_OUTINIT_RD(x)     (HW_FTM_OUTINIT(x).U)
#define HW_FTM_OUTINIT_WR(x, v)  (HW_FTM_OUTINIT(x).U = (v))
#define HW_FTM_OUTINIT_SET(x, v) (HW_FTM_OUTINIT_WR(x, HW_FTM_OUTINIT_RD(x) |  (v)))
#define HW_FTM_OUTINIT_CLR(x, v) (HW_FTM_OUTINIT_WR(x, HW_FTM_OUTINIT_RD(x) & ~(v)))
#define HW_FTM_OUTINIT_TOG(x, v) (HW_FTM_OUTINIT_WR(x, HW_FTM_OUTINIT_RD(x) ^  (v)))
/*@}*/

/*
 * Constants & macros for individual FTM_OUTINIT bitfields
 */

/*!
 * @name Register FTM_OUTINIT, field CH0OI[0] (RW)
 *
 * Selects the value that is forced into the channel output when the
 * initialization occurs.
 *
 * Values:
 * - 0 - The initialization value is 0.
 * - 1 - The initialization value is 1.
 */
/*@{*/
#define BP_FTM_OUTINIT_CH0OI (0U)          /*!< Bit position for FTM_OUTINIT_CH0OI. */
#define BM_FTM_OUTINIT_CH0OI (0x00000001U) /*!< Bit mask for FTM_OUTINIT_CH0OI. */
#define BS_FTM_OUTINIT_CH0OI (1U)          /*!< Bit field size in bits for FTM_OUTINIT_CH0OI. */

/*! @brief Read current value of the FTM_OUTINIT_CH0OI field. */
#define BR_FTM_OUTINIT_CH0OI(x) (BITBAND_ACCESS32(HW_FTM_OUTINIT_ADDR(x), BP_FTM_OUTINIT_CH0OI))

/*! @brief Format value for bitfield FTM_OUTINIT_CH0OI. */
#define BF_FTM_OUTINIT_CH0OI(v) ((uint32_t)((uint32_t)(v) << BP_FTM_OUTINIT_CH0OI) & BM_FTM_OUTINIT_CH0OI)

/*! @brief Set the CH0OI field to a new value. */
#define BW_FTM_OUTINIT_CH0OI(x, v) (BITBAND_ACCESS32(HW_FTM_OUTINIT_ADDR(x), BP_FTM_OUTINIT_CH0OI) = (v))
/*@}*/

/*!
 * @name Register FTM_OUTINIT, field CH1OI[1] (RW)
 *
 * Selects the value that is forced into the channel output when the
 * initialization occurs.
 *
 * Values:
 * - 0 - The initialization value is 0.
 * - 1 - The initialization value is 1.
 */
/*@{*/
#define BP_FTM_OUTINIT_CH1OI (1U)          /*!< Bit position for FTM_OUTINIT_CH1OI. */
#define BM_FTM_OUTINIT_CH1OI (0x00000002U) /*!< Bit mask for FTM_OUTINIT_CH1OI. */
#define BS_FTM_OUTINIT_CH1OI (1U)          /*!< Bit field size in bits for FTM_OUTINIT_CH1OI. */

/*! @brief Read current value of the FTM_OUTINIT_CH1OI field. */
#define BR_FTM_OUTINIT_CH1OI(x) (BITBAND_ACCESS32(HW_FTM_OUTINIT_ADDR(x), BP_FTM_OUTINIT_CH1OI))

/*! @brief Format value for bitfield FTM_OUTINIT_CH1OI. */
#define BF_FTM_OUTINIT_CH1OI(v) ((uint32_t)((uint32_t)(v) << BP_FTM_OUTINIT_CH1OI) & BM_FTM_OUTINIT_CH1OI)

/*! @brief Set the CH1OI field to a new value. */
#define BW_FTM_OUTINIT_CH1OI(x, v) (BITBAND_ACCESS32(HW_FTM_OUTINIT_ADDR(x), BP_FTM_OUTINIT_CH1OI) = (v))
/*@}*/

/*!
 * @name Register FTM_OUTINIT, field CH2OI[2] (RW)
 *
 * Selects the value that is forced into the channel output when the
 * initialization occurs.
 *
 * Values:
 * - 0 - The initialization value is 0.
 * - 1 - The initialization value is 1.
 */
/*@{*/
#define BP_FTM_OUTINIT_CH2OI (2U)          /*!< Bit position for FTM_OUTINIT_CH2OI. */
#define BM_FTM_OUTINIT_CH2OI (0x00000004U) /*!< Bit mask for FTM_OUTINIT_CH2OI. */
#define BS_FTM_OUTINIT_CH2OI (1U)          /*!< Bit field size in bits for FTM_OUTINIT_CH2OI. */

/*! @brief Read current value of the FTM_OUTINIT_CH2OI field. */
#define BR_FTM_OUTINIT_CH2OI(x) (BITBAND_ACCESS32(HW_FTM_OUTINIT_ADDR(x), BP_FTM_OUTINIT_CH2OI))

/*! @brief Format value for bitfield FTM_OUTINIT_CH2OI. */
#define BF_FTM_OUTINIT_CH2OI(v) ((uint32_t)((uint32_t)(v) << BP_FTM_OUTINIT_CH2OI) & BM_FTM_OUTINIT_CH2OI)

/*! @brief Set the CH2OI field to a new value. */
#define BW_FTM_OUTINIT_CH2OI(x, v) (BITBAND_ACCESS32(HW_FTM_OUTINIT_ADDR(x), BP_FTM_OUTINIT_CH2OI) = (v))
/*@}*/

/*!
 * @name Register FTM_OUTINIT, field CH3OI[3] (RW)
 *
 * Selects the value that is forced into the channel output when the
 * initialization occurs.
 *
 * Values:
 * - 0 - The initialization value is 0.
 * - 1 - The initialization value is 1.
 */
/*@{*/
#define BP_FTM_OUTINIT_CH3OI (3U)          /*!< Bit position for FTM_OUTINIT_CH3OI. */
#define BM_FTM_OUTINIT_CH3OI (0x00000008U) /*!< Bit mask for FTM_OUTINIT_CH3OI. */
#define BS_FTM_OUTINIT_CH3OI (1U)          /*!< Bit field size in bits for FTM_OUTINIT_CH3OI. */

/*! @brief Read current value of the FTM_OUTINIT_CH3OI field. */
#define BR_FTM_OUTINIT_CH3OI(x) (BITBAND_ACCESS32(HW_FTM_OUTINIT_ADDR(x), BP_FTM_OUTINIT_CH3OI))

/*! @brief Format value for bitfield FTM_OUTINIT_CH3OI. */
#define BF_FTM_OUTINIT_CH3OI(v) ((uint32_t)((uint32_t)(v) << BP_FTM_OUTINIT_CH3OI) & BM_FTM_OUTINIT_CH3OI)

/*! @brief Set the CH3OI field to a new value. */
#define BW_FTM_OUTINIT_CH3OI(x, v) (BITBAND_ACCESS32(HW_FTM_OUTINIT_ADDR(x), BP_FTM_OUTINIT_CH3OI) = (v))
/*@}*/

/*!
 * @name Register FTM_OUTINIT, field CH4OI[4] (RW)
 *
 * Selects the value that is forced into the channel output when the
 * initialization occurs.
 *
 * Values:
 * - 0 - The initialization value is 0.
 * - 1 - The initialization value is 1.
 */
/*@{*/
#define BP_FTM_OUTINIT_CH4OI (4U)          /*!< Bit position for FTM_OUTINIT_CH4OI. */
#define BM_FTM_OUTINIT_CH4OI (0x00000010U) /*!< Bit mask for FTM_OUTINIT_CH4OI. */
#define BS_FTM_OUTINIT_CH4OI (1U)          /*!< Bit field size in bits for FTM_OUTINIT_CH4OI. */

/*! @brief Read current value of the FTM_OUTINIT_CH4OI field. */
#define BR_FTM_OUTINIT_CH4OI(x) (BITBAND_ACCESS32(HW_FTM_OUTINIT_ADDR(x), BP_FTM_OUTINIT_CH4OI))

/*! @brief Format value for bitfield FTM_OUTINIT_CH4OI. */
#define BF_FTM_OUTINIT_CH4OI(v) ((uint32_t)((uint32_t)(v) << BP_FTM_OUTINIT_CH4OI) & BM_FTM_OUTINIT_CH4OI)

/*! @brief Set the CH4OI field to a new value. */
#define BW_FTM_OUTINIT_CH4OI(x, v) (BITBAND_ACCESS32(HW_FTM_OUTINIT_ADDR(x), BP_FTM_OUTINIT_CH4OI) = (v))
/*@}*/

/*!
 * @name Register FTM_OUTINIT, field CH5OI[5] (RW)
 *
 * Selects the value that is forced into the channel output when the
 * initialization occurs.
 *
 * Values:
 * - 0 - The initialization value is 0.
 * - 1 - The initialization value is 1.
 */
/*@{*/
#define BP_FTM_OUTINIT_CH5OI (5U)          /*!< Bit position for FTM_OUTINIT_CH5OI. */
#define BM_FTM_OUTINIT_CH5OI (0x00000020U) /*!< Bit mask for FTM_OUTINIT_CH5OI. */
#define BS_FTM_OUTINIT_CH5OI (1U)          /*!< Bit field size in bits for FTM_OUTINIT_CH5OI. */

/*! @brief Read current value of the FTM_OUTINIT_CH5OI field. */
#define BR_FTM_OUTINIT_CH5OI(x) (BITBAND_ACCESS32(HW_FTM_OUTINIT_ADDR(x), BP_FTM_OUTINIT_CH5OI))

/*! @brief Format value for bitfield FTM_OUTINIT_CH5OI. */
#define BF_FTM_OUTINIT_CH5OI(v) ((uint32_t)((uint32_t)(v) << BP_FTM_OUTINIT_CH5OI) & BM_FTM_OUTINIT_CH5OI)

/*! @brief Set the CH5OI field to a new value. */
#define BW_FTM_OUTINIT_CH5OI(x, v) (BITBAND_ACCESS32(HW_FTM_OUTINIT_ADDR(x), BP_FTM_OUTINIT_CH5OI) = (v))
/*@}*/

/*!
 * @name Register FTM_OUTINIT, field CH6OI[6] (RW)
 *
 * Selects the value that is forced into the channel output when the
 * initialization occurs.
 *
 * Values:
 * - 0 - The initialization value is 0.
 * - 1 - The initialization value is 1.
 */
/*@{*/
#define BP_FTM_OUTINIT_CH6OI (6U)          /*!< Bit position for FTM_OUTINIT_CH6OI. */
#define BM_FTM_OUTINIT_CH6OI (0x00000040U) /*!< Bit mask for FTM_OUTINIT_CH6OI. */
#define BS_FTM_OUTINIT_CH6OI (1U)          /*!< Bit field size in bits for FTM_OUTINIT_CH6OI. */

/*! @brief Read current value of the FTM_OUTINIT_CH6OI field. */
#define BR_FTM_OUTINIT_CH6OI(x) (BITBAND_ACCESS32(HW_FTM_OUTINIT_ADDR(x), BP_FTM_OUTINIT_CH6OI))

/*! @brief Format value for bitfield FTM_OUTINIT_CH6OI. */
#define BF_FTM_OUTINIT_CH6OI(v) ((uint32_t)((uint32_t)(v) << BP_FTM_OUTINIT_CH6OI) & BM_FTM_OUTINIT_CH6OI)

/*! @brief Set the CH6OI field to a new value. */
#define BW_FTM_OUTINIT_CH6OI(x, v) (BITBAND_ACCESS32(HW_FTM_OUTINIT_ADDR(x), BP_FTM_OUTINIT_CH6OI) = (v))
/*@}*/

/*!
 * @name Register FTM_OUTINIT, field CH7OI[7] (RW)
 *
 * Selects the value that is forced into the channel output when the
 * initialization occurs.
 *
 * Values:
 * - 0 - The initialization value is 0.
 * - 1 - The initialization value is 1.
 */
/*@{*/
#define BP_FTM_OUTINIT_CH7OI (7U)          /*!< Bit position for FTM_OUTINIT_CH7OI. */
#define BM_FTM_OUTINIT_CH7OI (0x00000080U) /*!< Bit mask for FTM_OUTINIT_CH7OI. */
#define BS_FTM_OUTINIT_CH7OI (1U)          /*!< Bit field size in bits for FTM_OUTINIT_CH7OI. */

/*! @brief Read current value of the FTM_OUTINIT_CH7OI field. */
#define BR_FTM_OUTINIT_CH7OI(x) (BITBAND_ACCESS32(HW_FTM_OUTINIT_ADDR(x), BP_FTM_OUTINIT_CH7OI))

/*! @brief Format value for bitfield FTM_OUTINIT_CH7OI. */
#define BF_FTM_OUTINIT_CH7OI(v) ((uint32_t)((uint32_t)(v) << BP_FTM_OUTINIT_CH7OI) & BM_FTM_OUTINIT_CH7OI)

/*! @brief Set the CH7OI field to a new value. */
#define BW_FTM_OUTINIT_CH7OI(x, v) (BITBAND_ACCESS32(HW_FTM_OUTINIT_ADDR(x), BP_FTM_OUTINIT_CH7OI) = (v))
/*@}*/

/*******************************************************************************
 * HW_FTM_OUTMASK - Output Mask
 ******************************************************************************/

/*!
 * @brief HW_FTM_OUTMASK - Output Mask (RW)
 *
 * Reset value: 0x00000000U
 *
 * This register provides a mask for each FTM channel. The mask of a channel
 * determines if its output responds, that is, it is masked or not, when a match
 * occurs. This feature is used for BLDC control where the PWM signal is presented
 * to an electric motor at specific times to provide electronic commutation. Any
 * write to the OUTMASK register, stores the value in its write buffer. The
 * register is updated with the value of its write buffer according to PWM
 * synchronization.
 */
typedef union _hw_ftm_outmask
{
    uint32_t U;
    struct _hw_ftm_outmask_bitfields
    {
        uint32_t CH0OM : 1;            /*!< [0] Channel 0 Output Mask */
        uint32_t CH1OM : 1;            /*!< [1] Channel 1 Output Mask */
        uint32_t CH2OM : 1;            /*!< [2] Channel 2 Output Mask */
        uint32_t CH3OM : 1;            /*!< [3] Channel 3 Output Mask */
        uint32_t CH4OM : 1;            /*!< [4] Channel 4 Output Mask */
        uint32_t CH5OM : 1;            /*!< [5] Channel 5 Output Mask */
        uint32_t CH6OM : 1;            /*!< [6] Channel 6 Output Mask */
        uint32_t CH7OM : 1;            /*!< [7] Channel 7 Output Mask */
        uint32_t RESERVED0 : 24;       /*!< [31:8]  */
    } B;
} hw_ftm_outmask_t;

/*!
 * @name Constants and macros for entire FTM_OUTMASK register
 */
/*@{*/
#define HW_FTM_OUTMASK_ADDR(x)   ((x) + 0x60U)

#define HW_FTM_OUTMASK(x)        (*(__IO hw_ftm_outmask_t *) HW_FTM_OUTMASK_ADDR(x))
#define HW_FTM_OUTMASK_RD(x)     (HW_FTM_OUTMASK(x).U)
#define HW_FTM_OUTMASK_WR(x, v)  (HW_FTM_OUTMASK(x).U = (v))
#define HW_FTM_OUTMASK_SET(x, v) (HW_FTM_OUTMASK_WR(x, HW_FTM_OUTMASK_RD(x) |  (v)))
#define HW_FTM_OUTMASK_CLR(x, v) (HW_FTM_OUTMASK_WR(x, HW_FTM_OUTMASK_RD(x) & ~(v)))
#define HW_FTM_OUTMASK_TOG(x, v) (HW_FTM_OUTMASK_WR(x, HW_FTM_OUTMASK_RD(x) ^  (v)))
/*@}*/

/*
 * Constants & macros for individual FTM_OUTMASK bitfields
 */

/*!
 * @name Register FTM_OUTMASK, field CH0OM[0] (RW)
 *
 * Defines if the channel output is masked or unmasked.
 *
 * Values:
 * - 0 - Channel output is not masked. It continues to operate normally.
 * - 1 - Channel output is masked. It is forced to its inactive state.
 */
/*@{*/
#define BP_FTM_OUTMASK_CH0OM (0U)          /*!< Bit position for FTM_OUTMASK_CH0OM. */
#define BM_FTM_OUTMASK_CH0OM (0x00000001U) /*!< Bit mask for FTM_OUTMASK_CH0OM. */
#define BS_FTM_OUTMASK_CH0OM (1U)          /*!< Bit field size in bits for FTM_OUTMASK_CH0OM. */

/*! @brief Read current value of the FTM_OUTMASK_CH0OM field. */
#define BR_FTM_OUTMASK_CH0OM(x) (BITBAND_ACCESS32(HW_FTM_OUTMASK_ADDR(x), BP_FTM_OUTMASK_CH0OM))

/*! @brief Format value for bitfield FTM_OUTMASK_CH0OM. */
#define BF_FTM_OUTMASK_CH0OM(v) ((uint32_t)((uint32_t)(v) << BP_FTM_OUTMASK_CH0OM) & BM_FTM_OUTMASK_CH0OM)

/*! @brief Set the CH0OM field to a new value. */
#define BW_FTM_OUTMASK_CH0OM(x, v) (BITBAND_ACCESS32(HW_FTM_OUTMASK_ADDR(x), BP_FTM_OUTMASK_CH0OM) = (v))
/*@}*/

/*!
 * @name Register FTM_OUTMASK, field CH1OM[1] (RW)
 *
 * Defines if the channel output is masked or unmasked.
 *
 * Values:
 * - 0 - Channel output is not masked. It continues to operate normally.
 * - 1 - Channel output is masked. It is forced to its inactive state.
 */
/*@{*/
#define BP_FTM_OUTMASK_CH1OM (1U)          /*!< Bit position for FTM_OUTMASK_CH1OM. */
#define BM_FTM_OUTMASK_CH1OM (0x00000002U) /*!< Bit mask for FTM_OUTMASK_CH1OM. */
#define BS_FTM_OUTMASK_CH1OM (1U)          /*!< Bit field size in bits for FTM_OUTMASK_CH1OM. */

/*! @brief Read current value of the FTM_OUTMASK_CH1OM field. */
#define BR_FTM_OUTMASK_CH1OM(x) (BITBAND_ACCESS32(HW_FTM_OUTMASK_ADDR(x), BP_FTM_OUTMASK_CH1OM))

/*! @brief Format value for bitfield FTM_OUTMASK_CH1OM. */
#define BF_FTM_OUTMASK_CH1OM(v) ((uint32_t)((uint32_t)(v) << BP_FTM_OUTMASK_CH1OM) & BM_FTM_OUTMASK_CH1OM)

/*! @brief Set the CH1OM field to a new value. */
#define BW_FTM_OUTMASK_CH1OM(x, v) (BITBAND_ACCESS32(HW_FTM_OUTMASK_ADDR(x), BP_FTM_OUTMASK_CH1OM) = (v))
/*@}*/

/*!
 * @name Register FTM_OUTMASK, field CH2OM[2] (RW)
 *
 * Defines if the channel output is masked or unmasked.
 *
 * Values:
 * - 0 - Channel output is not masked. It continues to operate normally.
 * - 1 - Channel output is masked. It is forced to its inactive state.
 */
/*@{*/
#define BP_FTM_OUTMASK_CH2OM (2U)          /*!< Bit position for FTM_OUTMASK_CH2OM. */
#define BM_FTM_OUTMASK_CH2OM (0x00000004U) /*!< Bit mask for FTM_OUTMASK_CH2OM. */
#define BS_FTM_OUTMASK_CH2OM (1U)          /*!< Bit field size in bits for FTM_OUTMASK_CH2OM. */

/*! @brief Read current value of the FTM_OUTMASK_CH2OM field. */
#define BR_FTM_OUTMASK_CH2OM(x) (BITBAND_ACCESS32(HW_FTM_OUTMASK_ADDR(x), BP_FTM_OUTMASK_CH2OM))

/*! @brief Format value for bitfield FTM_OUTMASK_CH2OM. */
#define BF_FTM_OUTMASK_CH2OM(v) ((uint32_t)((uint32_t)(v) << BP_FTM_OUTMASK_CH2OM) & BM_FTM_OUTMASK_CH2OM)

/*! @brief Set the CH2OM field to a new value. */
#define BW_FTM_OUTMASK_CH2OM(x, v) (BITBAND_ACCESS32(HW_FTM_OUTMASK_ADDR(x), BP_FTM_OUTMASK_CH2OM) = (v))
/*@}*/

/*!
 * @name Register FTM_OUTMASK, field CH3OM[3] (RW)
 *
 * Defines if the channel output is masked or unmasked.
 *
 * Values:
 * - 0 - Channel output is not masked. It continues to operate normally.
 * - 1 - Channel output is masked. It is forced to its inactive state.
 */
/*@{*/
#define BP_FTM_OUTMASK_CH3OM (3U)          /*!< Bit position for FTM_OUTMASK_CH3OM. */
#define BM_FTM_OUTMASK_CH3OM (0x00000008U) /*!< Bit mask for FTM_OUTMASK_CH3OM. */
#define BS_FTM_OUTMASK_CH3OM (1U)          /*!< Bit field size in bits for FTM_OUTMASK_CH3OM. */

/*! @brief Read current value of the FTM_OUTMASK_CH3OM field. */
#define BR_FTM_OUTMASK_CH3OM(x) (BITBAND_ACCESS32(HW_FTM_OUTMASK_ADDR(x), BP_FTM_OUTMASK_CH3OM))

/*! @brief Format value for bitfield FTM_OUTMASK_CH3OM. */
#define BF_FTM_OUTMASK_CH3OM(v) ((uint32_t)((uint32_t)(v) << BP_FTM_OUTMASK_CH3OM) & BM_FTM_OUTMASK_CH3OM)

/*! @brief Set the CH3OM field to a new value. */
#define BW_FTM_OUTMASK_CH3OM(x, v) (BITBAND_ACCESS32(HW_FTM_OUTMASK_ADDR(x), BP_FTM_OUTMASK_CH3OM) = (v))
/*@}*/

/*!
 * @name Register FTM_OUTMASK, field CH4OM[4] (RW)
 *
 * Defines if the channel output is masked or unmasked.
 *
 * Values:
 * - 0 - Channel output is not masked. It continues to operate normally.
 * - 1 - Channel output is masked. It is forced to its inactive state.
 */
/*@{*/
#define BP_FTM_OUTMASK_CH4OM (4U)          /*!< Bit position for FTM_OUTMASK_CH4OM. */
#define BM_FTM_OUTMASK_CH4OM (0x00000010U) /*!< Bit mask for FTM_OUTMASK_CH4OM. */
#define BS_FTM_OUTMASK_CH4OM (1U)          /*!< Bit field size in bits for FTM_OUTMASK_CH4OM. */

/*! @brief Read current value of the FTM_OUTMASK_CH4OM field. */
#define BR_FTM_OUTMASK_CH4OM(x) (BITBAND_ACCESS32(HW_FTM_OUTMASK_ADDR(x), BP_FTM_OUTMASK_CH4OM))

/*! @brief Format value for bitfield FTM_OUTMASK_CH4OM. */
#define BF_FTM_OUTMASK_CH4OM(v) ((uint32_t)((uint32_t)(v) << BP_FTM_OUTMASK_CH4OM) & BM_FTM_OUTMASK_CH4OM)

/*! @brief Set the CH4OM field to a new value. */
#define BW_FTM_OUTMASK_CH4OM(x, v) (BITBAND_ACCESS32(HW_FTM_OUTMASK_ADDR(x), BP_FTM_OUTMASK_CH4OM) = (v))
/*@}*/

/*!
 * @name Register FTM_OUTMASK, field CH5OM[5] (RW)
 *
 * Defines if the channel output is masked or unmasked.
 *
 * Values:
 * - 0 - Channel output is not masked. It continues to operate normally.
 * - 1 - Channel output is masked. It is forced to its inactive state.
 */
/*@{*/
#define BP_FTM_OUTMASK_CH5OM (5U)          /*!< Bit position for FTM_OUTMASK_CH5OM. */
#define BM_FTM_OUTMASK_CH5OM (0x00000020U) /*!< Bit mask for FTM_OUTMASK_CH5OM. */
#define BS_FTM_OUTMASK_CH5OM (1U)          /*!< Bit field size in bits for FTM_OUTMASK_CH5OM. */

/*! @brief Read current value of the FTM_OUTMASK_CH5OM field. */
#define BR_FTM_OUTMASK_CH5OM(x) (BITBAND_ACCESS32(HW_FTM_OUTMASK_ADDR(x), BP_FTM_OUTMASK_CH5OM))

/*! @brief Format value for bitfield FTM_OUTMASK_CH5OM. */
#define BF_FTM_OUTMASK_CH5OM(v) ((uint32_t)((uint32_t)(v) << BP_FTM_OUTMASK_CH5OM) & BM_FTM_OUTMASK_CH5OM)

/*! @brief Set the CH5OM field to a new value. */
#define BW_FTM_OUTMASK_CH5OM(x, v) (BITBAND_ACCESS32(HW_FTM_OUTMASK_ADDR(x), BP_FTM_OUTMASK_CH5OM) = (v))
/*@}*/

/*!
 * @name Register FTM_OUTMASK, field CH6OM[6] (RW)
 *
 * Defines if the channel output is masked or unmasked.
 *
 * Values:
 * - 0 - Channel output is not masked. It continues to operate normally.
 * - 1 - Channel output is masked. It is forced to its inactive state.
 */
/*@{*/
#define BP_FTM_OUTMASK_CH6OM (6U)          /*!< Bit position for FTM_OUTMASK_CH6OM. */
#define BM_FTM_OUTMASK_CH6OM (0x00000040U) /*!< Bit mask for FTM_OUTMASK_CH6OM. */
#define BS_FTM_OUTMASK_CH6OM (1U)          /*!< Bit field size in bits for FTM_OUTMASK_CH6OM. */

/*! @brief Read current value of the FTM_OUTMASK_CH6OM field. */
#define BR_FTM_OUTMASK_CH6OM(x) (BITBAND_ACCESS32(HW_FTM_OUTMASK_ADDR(x), BP_FTM_OUTMASK_CH6OM))

/*! @brief Format value for bitfield FTM_OUTMASK_CH6OM. */
#define BF_FTM_OUTMASK_CH6OM(v) ((uint32_t)((uint32_t)(v) << BP_FTM_OUTMASK_CH6OM) & BM_FTM_OUTMASK_CH6OM)

/*! @brief Set the CH6OM field to a new value. */
#define BW_FTM_OUTMASK_CH6OM(x, v) (BITBAND_ACCESS32(HW_FTM_OUTMASK_ADDR(x), BP_FTM_OUTMASK_CH6OM) = (v))
/*@}*/

/*!
 * @name Register FTM_OUTMASK, field CH7OM[7] (RW)
 *
 * Defines if the channel output is masked or unmasked.
 *
 * Values:
 * - 0 - Channel output is not masked. It continues to operate normally.
 * - 1 - Channel output is masked. It is forced to its inactive state.
 */
/*@{*/
#define BP_FTM_OUTMASK_CH7OM (7U)          /*!< Bit position for FTM_OUTMASK_CH7OM. */
#define BM_FTM_OUTMASK_CH7OM (0x00000080U) /*!< Bit mask for FTM_OUTMASK_CH7OM. */
#define BS_FTM_OUTMASK_CH7OM (1U)          /*!< Bit field size in bits for FTM_OUTMASK_CH7OM. */

/*! @brief Read current value of the FTM_OUTMASK_CH7OM field. */
#define BR_FTM_OUTMASK_CH7OM(x) (BITBAND_ACCESS32(HW_FTM_OUTMASK_ADDR(x), BP_FTM_OUTMASK_CH7OM))

/*! @brief Format value for bitfield FTM_OUTMASK_CH7OM. */
#define BF_FTM_OUTMASK_CH7OM(v) ((uint32_t)((uint32_t)(v) << BP_FTM_OUTMASK_CH7OM) & BM_FTM_OUTMASK_CH7OM)

/*! @brief Set the CH7OM field to a new value. */
#define BW_FTM_OUTMASK_CH7OM(x, v) (BITBAND_ACCESS32(HW_FTM_OUTMASK_ADDR(x), BP_FTM_OUTMASK_CH7OM) = (v))
/*@}*/

/*******************************************************************************
 * HW_FTM_COMBINE - Function For Linked Channels
 ******************************************************************************/

/*!
 * @brief HW_FTM_COMBINE - Function For Linked Channels (RW)
 *
 * Reset value: 0x00000000U
 *
 * This register contains the control bits used to configure the fault control,
 * synchronization, deadtime insertion, Dual Edge Capture mode, Complementary,
 * and Combine mode for each pair of channels (n) and (n+1), where n equals 0, 2,
 * 4, and 6.
 */
typedef union _hw_ftm_combine
{
    uint32_t U;
    struct _hw_ftm_combine_bitfields
    {
        uint32_t COMBINE0 : 1;         /*!< [0] Combine Channels For n = 0 */
        uint32_t COMP0 : 1;            /*!< [1] Complement Of Channel (n) For n = 0 */
        uint32_t DECAPEN0 : 1;         /*!< [2] Dual Edge Capture Mode Enable For n =
                                        * 0 */
        uint32_t DECAP0 : 1;           /*!< [3] Dual Edge Capture Mode Captures For n =
                                        * 0 */
        uint32_t DTEN0 : 1;            /*!< [4] Deadtime Enable For n = 0 */
        uint32_t SYNCEN0 : 1;          /*!< [5] Synchronization Enable For n = 0 */
        uint32_t FAULTEN0 : 1;         /*!< [6] Fault Control Enable For n = 0 */
        uint32_t RESERVED0 : 1;        /*!< [7]  */
        uint32_t COMBINE1 : 1;         /*!< [8] Combine Channels For n = 2 */
        uint32_t COMP1 : 1;            /*!< [9] Complement Of Channel (n) For n = 2 */
        uint32_t DECAPEN1 : 1;         /*!< [10] Dual Edge Capture Mode Enable For n
                                        * = 2 */
        uint32_t DECAP1 : 1;           /*!< [11] Dual Edge Capture Mode Captures For n
                                        * = 2 */
        uint32_t DTEN1 : 1;            /*!< [12] Deadtime Enable For n = 2 */
        uint32_t SYNCEN1 : 1;          /*!< [13] Synchronization Enable For n = 2 */
        uint32_t FAULTEN1 : 1;         /*!< [14] Fault Control Enable For n = 2 */
        uint32_t RESERVED1 : 1;        /*!< [15]  */
        uint32_t COMBINE2 : 1;         /*!< [16] Combine Channels For n = 4 */
        uint32_t COMP2 : 1;            /*!< [17] Complement Of Channel (n) For n = 4 */
        uint32_t DECAPEN2 : 1;         /*!< [18] Dual Edge Capture Mode Enable For n
                                        * = 4 */
        uint32_t DECAP2 : 1;           /*!< [19] Dual Edge Capture Mode Captures For n
                                        * = 4 */
        uint32_t DTEN2 : 1;            /*!< [20] Deadtime Enable For n = 4 */
        uint32_t SYNCEN2 : 1;          /*!< [21] Synchronization Enable For n = 4 */
        uint32_t FAULTEN2 : 1;         /*!< [22] Fault Control Enable For n = 4 */
        uint32_t RESERVED2 : 1;        /*!< [23]  */
        uint32_t COMBINE3 : 1;         /*!< [24] Combine Channels For n = 6 */
        uint32_t COMP3 : 1;            /*!< [25] Complement Of Channel (n) for n = 6 */
        uint32_t DECAPEN3 : 1;         /*!< [26] Dual Edge Capture Mode Enable For n
                                        * = 6 */
        uint32_t DECAP3 : 1;           /*!< [27] Dual Edge Capture Mode Captures For n
                                        * = 6 */
        uint32_t DTEN3 : 1;            /*!< [28] Deadtime Enable For n = 6 */
        uint32_t SYNCEN3 : 1;          /*!< [29] Synchronization Enable For n = 6 */
        uint32_t FAULTEN3 : 1;         /*!< [30] Fault Control Enable For n = 6 */
        uint32_t RESERVED3 : 1;        /*!< [31]  */
    } B;
} hw_ftm_combine_t;

/*!
 * @name Constants and macros for entire FTM_COMBINE register
 */
/*@{*/
#define HW_FTM_COMBINE_ADDR(x)   ((x) + 0x64U)

#define HW_FTM_COMBINE(x)        (*(__IO hw_ftm_combine_t *) HW_FTM_COMBINE_ADDR(x))
#define HW_FTM_COMBINE_RD(x)     (HW_FTM_COMBINE(x).U)
#define HW_FTM_COMBINE_WR(x, v)  (HW_FTM_COMBINE(x).U = (v))
#define HW_FTM_COMBINE_SET(x, v) (HW_FTM_COMBINE_WR(x, HW_FTM_COMBINE_RD(x) |  (v)))
#define HW_FTM_COMBINE_CLR(x, v) (HW_FTM_COMBINE_WR(x, HW_FTM_COMBINE_RD(x) & ~(v)))
#define HW_FTM_COMBINE_TOG(x, v) (HW_FTM_COMBINE_WR(x, HW_FTM_COMBINE_RD(x) ^  (v)))
/*@}*/

/*
 * Constants & macros for individual FTM_COMBINE bitfields
 */

/*!
 * @name Register FTM_COMBINE, field COMBINE0[0] (RW)
 *
 * Enables the combine feature for channels (n) and (n+1). This field is write
 * protected. It can be written only when MODE[WPDIS] = 1.
 *
 * Values:
 * - 0 - Channels (n) and (n+1) are independent.
 * - 1 - Channels (n) and (n+1) are combined.
 */
/*@{*/
#define BP_FTM_COMBINE_COMBINE0 (0U)       /*!< Bit position for FTM_COMBINE_COMBINE0. */
#define BM_FTM_COMBINE_COMBINE0 (0x00000001U) /*!< Bit mask for FTM_COMBINE_COMBINE0. */
#define BS_FTM_COMBINE_COMBINE0 (1U)       /*!< Bit field size in bits for FTM_COMBINE_COMBINE0. */

/*! @brief Read current value of the FTM_COMBINE_COMBINE0 field. */
#define BR_FTM_COMBINE_COMBINE0(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_COMBINE0))

/*! @brief Format value for bitfield FTM_COMBINE_COMBINE0. */
#define BF_FTM_COMBINE_COMBINE0(v) ((uint32_t)((uint32_t)(v) << BP_FTM_COMBINE_COMBINE0) & BM_FTM_COMBINE_COMBINE0)

/*! @brief Set the COMBINE0 field to a new value. */
#define BW_FTM_COMBINE_COMBINE0(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_COMBINE0) = (v))
/*@}*/

/*!
 * @name Register FTM_COMBINE, field COMP0[1] (RW)
 *
 * Enables Complementary mode for the combined channels. In Complementary mode
 * the channel (n+1) output is the inverse of the channel (n) output. This field
 * is write protected. It can be written only when MODE[WPDIS] = 1.
 *
 * Values:
 * - 0 - The channel (n+1) output is the same as the channel (n) output.
 * - 1 - The channel (n+1) output is the complement of the channel (n) output.
 */
/*@{*/
#define BP_FTM_COMBINE_COMP0 (1U)          /*!< Bit position for FTM_COMBINE_COMP0. */
#define BM_FTM_COMBINE_COMP0 (0x00000002U) /*!< Bit mask for FTM_COMBINE_COMP0. */
#define BS_FTM_COMBINE_COMP0 (1U)          /*!< Bit field size in bits for FTM_COMBINE_COMP0. */

/*! @brief Read current value of the FTM_COMBINE_COMP0 field. */
#define BR_FTM_COMBINE_COMP0(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_COMP0))

/*! @brief Format value for bitfield FTM_COMBINE_COMP0. */
#define BF_FTM_COMBINE_COMP0(v) ((uint32_t)((uint32_t)(v) << BP_FTM_COMBINE_COMP0) & BM_FTM_COMBINE_COMP0)

/*! @brief Set the COMP0 field to a new value. */
#define BW_FTM_COMBINE_COMP0(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_COMP0) = (v))
/*@}*/

/*!
 * @name Register FTM_COMBINE, field DECAPEN0[2] (RW)
 *
 * Enables the Dual Edge Capture mode in the channels (n) and (n+1). This bit
 * reconfigures the function of MSnA, ELSnB:ELSnA and ELS(n+1)B:ELS(n+1)A bits in
 * Dual Edge Capture mode according to #ModeSel1Table. This field applies only
 * when FTMEN = 1. This field is write protected. It can be written only when
 * MODE[WPDIS] = 1.
 *
 * Values:
 * - 0 - The Dual Edge Capture mode in this pair of channels is disabled.
 * - 1 - The Dual Edge Capture mode in this pair of channels is enabled.
 */
/*@{*/
#define BP_FTM_COMBINE_DECAPEN0 (2U)       /*!< Bit position for FTM_COMBINE_DECAPEN0. */
#define BM_FTM_COMBINE_DECAPEN0 (0x00000004U) /*!< Bit mask for FTM_COMBINE_DECAPEN0. */
#define BS_FTM_COMBINE_DECAPEN0 (1U)       /*!< Bit field size in bits for FTM_COMBINE_DECAPEN0. */

/*! @brief Read current value of the FTM_COMBINE_DECAPEN0 field. */
#define BR_FTM_COMBINE_DECAPEN0(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_DECAPEN0))

/*! @brief Format value for bitfield FTM_COMBINE_DECAPEN0. */
#define BF_FTM_COMBINE_DECAPEN0(v) ((uint32_t)((uint32_t)(v) << BP_FTM_COMBINE_DECAPEN0) & BM_FTM_COMBINE_DECAPEN0)

/*! @brief Set the DECAPEN0 field to a new value. */
#define BW_FTM_COMBINE_DECAPEN0(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_DECAPEN0) = (v))
/*@}*/

/*!
 * @name Register FTM_COMBINE, field DECAP0[3] (RW)
 *
 * Enables the capture of the FTM counter value according to the channel (n)
 * input event and the configuration of the dual edge capture bits. This field
 * applies only when FTMEN = 1 and DECAPEN = 1. DECAP bit is cleared automatically by
 * hardware if dual edge capture - one-shot mode is selected and when the capture
 * of channel (n+1) event is made.
 *
 * Values:
 * - 0 - The dual edge captures are inactive.
 * - 1 - The dual edge captures are active.
 */
/*@{*/
#define BP_FTM_COMBINE_DECAP0 (3U)         /*!< Bit position for FTM_COMBINE_DECAP0. */
#define BM_FTM_COMBINE_DECAP0 (0x00000008U) /*!< Bit mask for FTM_COMBINE_DECAP0. */
#define BS_FTM_COMBINE_DECAP0 (1U)         /*!< Bit field size in bits for FTM_COMBINE_DECAP0. */

/*! @brief Read current value of the FTM_COMBINE_DECAP0 field. */
#define BR_FTM_COMBINE_DECAP0(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_DECAP0))

/*! @brief Format value for bitfield FTM_COMBINE_DECAP0. */
#define BF_FTM_COMBINE_DECAP0(v) ((uint32_t)((uint32_t)(v) << BP_FTM_COMBINE_DECAP0) & BM_FTM_COMBINE_DECAP0)

/*! @brief Set the DECAP0 field to a new value. */
#define BW_FTM_COMBINE_DECAP0(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_DECAP0) = (v))
/*@}*/

/*!
 * @name Register FTM_COMBINE, field DTEN0[4] (RW)
 *
 * Enables the deadtime insertion in the channels (n) and (n+1). This field is
 * write protected. It can be written only when MODE[WPDIS] = 1.
 *
 * Values:
 * - 0 - The deadtime insertion in this pair of channels is disabled.
 * - 1 - The deadtime insertion in this pair of channels is enabled.
 */
/*@{*/
#define BP_FTM_COMBINE_DTEN0 (4U)          /*!< Bit position for FTM_COMBINE_DTEN0. */
#define BM_FTM_COMBINE_DTEN0 (0x00000010U) /*!< Bit mask for FTM_COMBINE_DTEN0. */
#define BS_FTM_COMBINE_DTEN0 (1U)          /*!< Bit field size in bits for FTM_COMBINE_DTEN0. */

/*! @brief Read current value of the FTM_COMBINE_DTEN0 field. */
#define BR_FTM_COMBINE_DTEN0(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_DTEN0))

/*! @brief Format value for bitfield FTM_COMBINE_DTEN0. */
#define BF_FTM_COMBINE_DTEN0(v) ((uint32_t)((uint32_t)(v) << BP_FTM_COMBINE_DTEN0) & BM_FTM_COMBINE_DTEN0)

/*! @brief Set the DTEN0 field to a new value. */
#define BW_FTM_COMBINE_DTEN0(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_DTEN0) = (v))
/*@}*/

/*!
 * @name Register FTM_COMBINE, field SYNCEN0[5] (RW)
 *
 * Enables PWM synchronization of registers C(n)V and C(n+1)V.
 *
 * Values:
 * - 0 - The PWM synchronization in this pair of channels is disabled.
 * - 1 - The PWM synchronization in this pair of channels is enabled.
 */
/*@{*/
#define BP_FTM_COMBINE_SYNCEN0 (5U)        /*!< Bit position for FTM_COMBINE_SYNCEN0. */
#define BM_FTM_COMBINE_SYNCEN0 (0x00000020U) /*!< Bit mask for FTM_COMBINE_SYNCEN0. */
#define BS_FTM_COMBINE_SYNCEN0 (1U)        /*!< Bit field size in bits for FTM_COMBINE_SYNCEN0. */

/*! @brief Read current value of the FTM_COMBINE_SYNCEN0 field. */
#define BR_FTM_COMBINE_SYNCEN0(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_SYNCEN0))

/*! @brief Format value for bitfield FTM_COMBINE_SYNCEN0. */
#define BF_FTM_COMBINE_SYNCEN0(v) ((uint32_t)((uint32_t)(v) << BP_FTM_COMBINE_SYNCEN0) & BM_FTM_COMBINE_SYNCEN0)

/*! @brief Set the SYNCEN0 field to a new value. */
#define BW_FTM_COMBINE_SYNCEN0(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_SYNCEN0) = (v))
/*@}*/

/*!
 * @name Register FTM_COMBINE, field FAULTEN0[6] (RW)
 *
 * Enables the fault control in channels (n) and (n+1). This field is write
 * protected. It can be written only when MODE[WPDIS] = 1.
 *
 * Values:
 * - 0 - The fault control in this pair of channels is disabled.
 * - 1 - The fault control in this pair of channels is enabled.
 */
/*@{*/
#define BP_FTM_COMBINE_FAULTEN0 (6U)       /*!< Bit position for FTM_COMBINE_FAULTEN0. */
#define BM_FTM_COMBINE_FAULTEN0 (0x00000040U) /*!< Bit mask for FTM_COMBINE_FAULTEN0. */
#define BS_FTM_COMBINE_FAULTEN0 (1U)       /*!< Bit field size in bits for FTM_COMBINE_FAULTEN0. */

/*! @brief Read current value of the FTM_COMBINE_FAULTEN0 field. */
#define BR_FTM_COMBINE_FAULTEN0(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_FAULTEN0))

/*! @brief Format value for bitfield FTM_COMBINE_FAULTEN0. */
#define BF_FTM_COMBINE_FAULTEN0(v) ((uint32_t)((uint32_t)(v) << BP_FTM_COMBINE_FAULTEN0) & BM_FTM_COMBINE_FAULTEN0)

/*! @brief Set the FAULTEN0 field to a new value. */
#define BW_FTM_COMBINE_FAULTEN0(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_FAULTEN0) = (v))
/*@}*/

/*!
 * @name Register FTM_COMBINE, field COMBINE1[8] (RW)
 *
 * Enables the combine feature for channels (n) and (n+1). This field is write
 * protected. It can be written only when MODE[WPDIS] = 1.
 *
 * Values:
 * - 0 - Channels (n) and (n+1) are independent.
 * - 1 - Channels (n) and (n+1) are combined.
 */
/*@{*/
#define BP_FTM_COMBINE_COMBINE1 (8U)       /*!< Bit position for FTM_COMBINE_COMBINE1. */
#define BM_FTM_COMBINE_COMBINE1 (0x00000100U) /*!< Bit mask for FTM_COMBINE_COMBINE1. */
#define BS_FTM_COMBINE_COMBINE1 (1U)       /*!< Bit field size in bits for FTM_COMBINE_COMBINE1. */

/*! @brief Read current value of the FTM_COMBINE_COMBINE1 field. */
#define BR_FTM_COMBINE_COMBINE1(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_COMBINE1))

/*! @brief Format value for bitfield FTM_COMBINE_COMBINE1. */
#define BF_FTM_COMBINE_COMBINE1(v) ((uint32_t)((uint32_t)(v) << BP_FTM_COMBINE_COMBINE1) & BM_FTM_COMBINE_COMBINE1)

/*! @brief Set the COMBINE1 field to a new value. */
#define BW_FTM_COMBINE_COMBINE1(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_COMBINE1) = (v))
/*@}*/

/*!
 * @name Register FTM_COMBINE, field COMP1[9] (RW)
 *
 * Enables Complementary mode for the combined channels. In Complementary mode
 * the channel (n+1) output is the inverse of the channel (n) output. This field
 * is write protected. It can be written only when MODE[WPDIS] = 1.
 *
 * Values:
 * - 0 - The channel (n+1) output is the same as the channel (n) output.
 * - 1 - The channel (n+1) output is the complement of the channel (n) output.
 */
/*@{*/
#define BP_FTM_COMBINE_COMP1 (9U)          /*!< Bit position for FTM_COMBINE_COMP1. */
#define BM_FTM_COMBINE_COMP1 (0x00000200U) /*!< Bit mask for FTM_COMBINE_COMP1. */
#define BS_FTM_COMBINE_COMP1 (1U)          /*!< Bit field size in bits for FTM_COMBINE_COMP1. */

/*! @brief Read current value of the FTM_COMBINE_COMP1 field. */
#define BR_FTM_COMBINE_COMP1(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_COMP1))

/*! @brief Format value for bitfield FTM_COMBINE_COMP1. */
#define BF_FTM_COMBINE_COMP1(v) ((uint32_t)((uint32_t)(v) << BP_FTM_COMBINE_COMP1) & BM_FTM_COMBINE_COMP1)

/*! @brief Set the COMP1 field to a new value. */
#define BW_FTM_COMBINE_COMP1(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_COMP1) = (v))
/*@}*/

/*!
 * @name Register FTM_COMBINE, field DECAPEN1[10] (RW)
 *
 * Enables the Dual Edge Capture mode in the channels (n) and (n+1). This bit
 * reconfigures the function of MSnA, ELSnB:ELSnA and ELS(n+1)B:ELS(n+1)A bits in
 * Dual Edge Capture mode according to #ModeSel1Table. This field applies only
 * when FTMEN = 1. This field is write protected. It can be written only when
 * MODE[WPDIS] = 1.
 *
 * Values:
 * - 0 - The Dual Edge Capture mode in this pair of channels is disabled.
 * - 1 - The Dual Edge Capture mode in this pair of channels is enabled.
 */
/*@{*/
#define BP_FTM_COMBINE_DECAPEN1 (10U)      /*!< Bit position for FTM_COMBINE_DECAPEN1. */
#define BM_FTM_COMBINE_DECAPEN1 (0x00000400U) /*!< Bit mask for FTM_COMBINE_DECAPEN1. */
#define BS_FTM_COMBINE_DECAPEN1 (1U)       /*!< Bit field size in bits for FTM_COMBINE_DECAPEN1. */

/*! @brief Read current value of the FTM_COMBINE_DECAPEN1 field. */
#define BR_FTM_COMBINE_DECAPEN1(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_DECAPEN1))

/*! @brief Format value for bitfield FTM_COMBINE_DECAPEN1. */
#define BF_FTM_COMBINE_DECAPEN1(v) ((uint32_t)((uint32_t)(v) << BP_FTM_COMBINE_DECAPEN1) & BM_FTM_COMBINE_DECAPEN1)

/*! @brief Set the DECAPEN1 field to a new value. */
#define BW_FTM_COMBINE_DECAPEN1(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_DECAPEN1) = (v))
/*@}*/

/*!
 * @name Register FTM_COMBINE, field DECAP1[11] (RW)
 *
 * Enables the capture of the FTM counter value according to the channel (n)
 * input event and the configuration of the dual edge capture bits. This field
 * applies only when FTMEN = 1 and DECAPEN = 1. DECAP bit is cleared automatically by
 * hardware if Dual Edge Capture - One-Shot mode is selected and when the capture
 * of channel (n+1) event is made.
 *
 * Values:
 * - 0 - The dual edge captures are inactive.
 * - 1 - The dual edge captures are active.
 */
/*@{*/
#define BP_FTM_COMBINE_DECAP1 (11U)        /*!< Bit position for FTM_COMBINE_DECAP1. */
#define BM_FTM_COMBINE_DECAP1 (0x00000800U) /*!< Bit mask for FTM_COMBINE_DECAP1. */
#define BS_FTM_COMBINE_DECAP1 (1U)         /*!< Bit field size in bits for FTM_COMBINE_DECAP1. */

/*! @brief Read current value of the FTM_COMBINE_DECAP1 field. */
#define BR_FTM_COMBINE_DECAP1(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_DECAP1))

/*! @brief Format value for bitfield FTM_COMBINE_DECAP1. */
#define BF_FTM_COMBINE_DECAP1(v) ((uint32_t)((uint32_t)(v) << BP_FTM_COMBINE_DECAP1) & BM_FTM_COMBINE_DECAP1)

/*! @brief Set the DECAP1 field to a new value. */
#define BW_FTM_COMBINE_DECAP1(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_DECAP1) = (v))
/*@}*/

/*!
 * @name Register FTM_COMBINE, field DTEN1[12] (RW)
 *
 * Enables the deadtime insertion in the channels (n) and (n+1). This field is
 * write protected. It can be written only when MODE[WPDIS] = 1.
 *
 * Values:
 * - 0 - The deadtime insertion in this pair of channels is disabled.
 * - 1 - The deadtime insertion in this pair of channels is enabled.
 */
/*@{*/
#define BP_FTM_COMBINE_DTEN1 (12U)         /*!< Bit position for FTM_COMBINE_DTEN1. */
#define BM_FTM_COMBINE_DTEN1 (0x00001000U) /*!< Bit mask for FTM_COMBINE_DTEN1. */
#define BS_FTM_COMBINE_DTEN1 (1U)          /*!< Bit field size in bits for FTM_COMBINE_DTEN1. */

/*! @brief Read current value of the FTM_COMBINE_DTEN1 field. */
#define BR_FTM_COMBINE_DTEN1(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_DTEN1))

/*! @brief Format value for bitfield FTM_COMBINE_DTEN1. */
#define BF_FTM_COMBINE_DTEN1(v) ((uint32_t)((uint32_t)(v) << BP_FTM_COMBINE_DTEN1) & BM_FTM_COMBINE_DTEN1)

/*! @brief Set the DTEN1 field to a new value. */
#define BW_FTM_COMBINE_DTEN1(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_DTEN1) = (v))
/*@}*/

/*!
 * @name Register FTM_COMBINE, field SYNCEN1[13] (RW)
 *
 * Enables PWM synchronization of registers C(n)V and C(n+1)V.
 *
 * Values:
 * - 0 - The PWM synchronization in this pair of channels is disabled.
 * - 1 - The PWM synchronization in this pair of channels is enabled.
 */
/*@{*/
#define BP_FTM_COMBINE_SYNCEN1 (13U)       /*!< Bit position for FTM_COMBINE_SYNCEN1. */
#define BM_FTM_COMBINE_SYNCEN1 (0x00002000U) /*!< Bit mask for FTM_COMBINE_SYNCEN1. */
#define BS_FTM_COMBINE_SYNCEN1 (1U)        /*!< Bit field size in bits for FTM_COMBINE_SYNCEN1. */

/*! @brief Read current value of the FTM_COMBINE_SYNCEN1 field. */
#define BR_FTM_COMBINE_SYNCEN1(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_SYNCEN1))

/*! @brief Format value for bitfield FTM_COMBINE_SYNCEN1. */
#define BF_FTM_COMBINE_SYNCEN1(v) ((uint32_t)((uint32_t)(v) << BP_FTM_COMBINE_SYNCEN1) & BM_FTM_COMBINE_SYNCEN1)

/*! @brief Set the SYNCEN1 field to a new value. */
#define BW_FTM_COMBINE_SYNCEN1(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_SYNCEN1) = (v))
/*@}*/

/*!
 * @name Register FTM_COMBINE, field FAULTEN1[14] (RW)
 *
 * Enables the fault control in channels (n) and (n+1). This field is write
 * protected. It can be written only when MODE[WPDIS] = 1.
 *
 * Values:
 * - 0 - The fault control in this pair of channels is disabled.
 * - 1 - The fault control in this pair of channels is enabled.
 */
/*@{*/
#define BP_FTM_COMBINE_FAULTEN1 (14U)      /*!< Bit position for FTM_COMBINE_FAULTEN1. */
#define BM_FTM_COMBINE_FAULTEN1 (0x00004000U) /*!< Bit mask for FTM_COMBINE_FAULTEN1. */
#define BS_FTM_COMBINE_FAULTEN1 (1U)       /*!< Bit field size in bits for FTM_COMBINE_FAULTEN1. */

/*! @brief Read current value of the FTM_COMBINE_FAULTEN1 field. */
#define BR_FTM_COMBINE_FAULTEN1(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_FAULTEN1))

/*! @brief Format value for bitfield FTM_COMBINE_FAULTEN1. */
#define BF_FTM_COMBINE_FAULTEN1(v) ((uint32_t)((uint32_t)(v) << BP_FTM_COMBINE_FAULTEN1) & BM_FTM_COMBINE_FAULTEN1)

/*! @brief Set the FAULTEN1 field to a new value. */
#define BW_FTM_COMBINE_FAULTEN1(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_FAULTEN1) = (v))
/*@}*/

/*!
 * @name Register FTM_COMBINE, field COMBINE2[16] (RW)
 *
 * Enables the combine feature for channels (n) and (n+1). This field is write
 * protected. It can be written only when MODE[WPDIS] = 1.
 *
 * Values:
 * - 0 - Channels (n) and (n+1) are independent.
 * - 1 - Channels (n) and (n+1) are combined.
 */
/*@{*/
#define BP_FTM_COMBINE_COMBINE2 (16U)      /*!< Bit position for FTM_COMBINE_COMBINE2. */
#define BM_FTM_COMBINE_COMBINE2 (0x00010000U) /*!< Bit mask for FTM_COMBINE_COMBINE2. */
#define BS_FTM_COMBINE_COMBINE2 (1U)       /*!< Bit field size in bits for FTM_COMBINE_COMBINE2. */

/*! @brief Read current value of the FTM_COMBINE_COMBINE2 field. */
#define BR_FTM_COMBINE_COMBINE2(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_COMBINE2))

/*! @brief Format value for bitfield FTM_COMBINE_COMBINE2. */
#define BF_FTM_COMBINE_COMBINE2(v) ((uint32_t)((uint32_t)(v) << BP_FTM_COMBINE_COMBINE2) & BM_FTM_COMBINE_COMBINE2)

/*! @brief Set the COMBINE2 field to a new value. */
#define BW_FTM_COMBINE_COMBINE2(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_COMBINE2) = (v))
/*@}*/

/*!
 * @name Register FTM_COMBINE, field COMP2[17] (RW)
 *
 * Enables Complementary mode for the combined channels. In Complementary mode
 * the channel (n+1) output is the inverse of the channel (n) output. This field
 * is write protected. It can be written only when MODE[WPDIS] = 1.
 *
 * Values:
 * - 0 - The channel (n+1) output is the same as the channel (n) output.
 * - 1 - The channel (n+1) output is the complement of the channel (n) output.
 */
/*@{*/
#define BP_FTM_COMBINE_COMP2 (17U)         /*!< Bit position for FTM_COMBINE_COMP2. */
#define BM_FTM_COMBINE_COMP2 (0x00020000U) /*!< Bit mask for FTM_COMBINE_COMP2. */
#define BS_FTM_COMBINE_COMP2 (1U)          /*!< Bit field size in bits for FTM_COMBINE_COMP2. */

/*! @brief Read current value of the FTM_COMBINE_COMP2 field. */
#define BR_FTM_COMBINE_COMP2(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_COMP2))

/*! @brief Format value for bitfield FTM_COMBINE_COMP2. */
#define BF_FTM_COMBINE_COMP2(v) ((uint32_t)((uint32_t)(v) << BP_FTM_COMBINE_COMP2) & BM_FTM_COMBINE_COMP2)

/*! @brief Set the COMP2 field to a new value. */
#define BW_FTM_COMBINE_COMP2(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_COMP2) = (v))
/*@}*/

/*!
 * @name Register FTM_COMBINE, field DECAPEN2[18] (RW)
 *
 * Enables the Dual Edge Capture mode in the channels (n) and (n+1). This bit
 * reconfigures the function of MSnA, ELSnB:ELSnA and ELS(n+1)B:ELS(n+1)A bits in
 * Dual Edge Capture mode according to #ModeSel1Table. This field applies only
 * when FTMEN = 1. This field is write protected. It can be written only when
 * MODE[WPDIS] = 1.
 *
 * Values:
 * - 0 - The Dual Edge Capture mode in this pair of channels is disabled.
 * - 1 - The Dual Edge Capture mode in this pair of channels is enabled.
 */
/*@{*/
#define BP_FTM_COMBINE_DECAPEN2 (18U)      /*!< Bit position for FTM_COMBINE_DECAPEN2. */
#define BM_FTM_COMBINE_DECAPEN2 (0x00040000U) /*!< Bit mask for FTM_COMBINE_DECAPEN2. */
#define BS_FTM_COMBINE_DECAPEN2 (1U)       /*!< Bit field size in bits for FTM_COMBINE_DECAPEN2. */

/*! @brief Read current value of the FTM_COMBINE_DECAPEN2 field. */
#define BR_FTM_COMBINE_DECAPEN2(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_DECAPEN2))

/*! @brief Format value for bitfield FTM_COMBINE_DECAPEN2. */
#define BF_FTM_COMBINE_DECAPEN2(v) ((uint32_t)((uint32_t)(v) << BP_FTM_COMBINE_DECAPEN2) & BM_FTM_COMBINE_DECAPEN2)

/*! @brief Set the DECAPEN2 field to a new value. */
#define BW_FTM_COMBINE_DECAPEN2(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_DECAPEN2) = (v))
/*@}*/

/*!
 * @name Register FTM_COMBINE, field DECAP2[19] (RW)
 *
 * Enables the capture of the FTM counter value according to the channel (n)
 * input event and the configuration of the dual edge capture bits. This field
 * applies only when FTMEN = 1 and DECAPEN = 1. DECAP bit is cleared automatically by
 * hardware if dual edge capture - one-shot mode is selected and when the capture
 * of channel (n+1) event is made.
 *
 * Values:
 * - 0 - The dual edge captures are inactive.
 * - 1 - The dual edge captures are active.
 */
/*@{*/
#define BP_FTM_COMBINE_DECAP2 (19U)        /*!< Bit position for FTM_COMBINE_DECAP2. */
#define BM_FTM_COMBINE_DECAP2 (0x00080000U) /*!< Bit mask for FTM_COMBINE_DECAP2. */
#define BS_FTM_COMBINE_DECAP2 (1U)         /*!< Bit field size in bits for FTM_COMBINE_DECAP2. */

/*! @brief Read current value of the FTM_COMBINE_DECAP2 field. */
#define BR_FTM_COMBINE_DECAP2(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_DECAP2))

/*! @brief Format value for bitfield FTM_COMBINE_DECAP2. */
#define BF_FTM_COMBINE_DECAP2(v) ((uint32_t)((uint32_t)(v) << BP_FTM_COMBINE_DECAP2) & BM_FTM_COMBINE_DECAP2)

/*! @brief Set the DECAP2 field to a new value. */
#define BW_FTM_COMBINE_DECAP2(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_DECAP2) = (v))
/*@}*/

/*!
 * @name Register FTM_COMBINE, field DTEN2[20] (RW)
 *
 * Enables the deadtime insertion in the channels (n) and (n+1). This field is
 * write protected. It can be written only when MODE[WPDIS] = 1.
 *
 * Values:
 * - 0 - The deadtime insertion in this pair of channels is disabled.
 * - 1 - The deadtime insertion in this pair of channels is enabled.
 */
/*@{*/
#define BP_FTM_COMBINE_DTEN2 (20U)         /*!< Bit position for FTM_COMBINE_DTEN2. */
#define BM_FTM_COMBINE_DTEN2 (0x00100000U) /*!< Bit mask for FTM_COMBINE_DTEN2. */
#define BS_FTM_COMBINE_DTEN2 (1U)          /*!< Bit field size in bits for FTM_COMBINE_DTEN2. */

/*! @brief Read current value of the FTM_COMBINE_DTEN2 field. */
#define BR_FTM_COMBINE_DTEN2(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_DTEN2))

/*! @brief Format value for bitfield FTM_COMBINE_DTEN2. */
#define BF_FTM_COMBINE_DTEN2(v) ((uint32_t)((uint32_t)(v) << BP_FTM_COMBINE_DTEN2) & BM_FTM_COMBINE_DTEN2)

/*! @brief Set the DTEN2 field to a new value. */
#define BW_FTM_COMBINE_DTEN2(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_DTEN2) = (v))
/*@}*/

/*!
 * @name Register FTM_COMBINE, field SYNCEN2[21] (RW)
 *
 * Enables PWM synchronization of registers C(n)V and C(n+1)V.
 *
 * Values:
 * - 0 - The PWM synchronization in this pair of channels is disabled.
 * - 1 - The PWM synchronization in this pair of channels is enabled.
 */
/*@{*/
#define BP_FTM_COMBINE_SYNCEN2 (21U)       /*!< Bit position for FTM_COMBINE_SYNCEN2. */
#define BM_FTM_COMBINE_SYNCEN2 (0x00200000U) /*!< Bit mask for FTM_COMBINE_SYNCEN2. */
#define BS_FTM_COMBINE_SYNCEN2 (1U)        /*!< Bit field size in bits for FTM_COMBINE_SYNCEN2. */

/*! @brief Read current value of the FTM_COMBINE_SYNCEN2 field. */
#define BR_FTM_COMBINE_SYNCEN2(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_SYNCEN2))

/*! @brief Format value for bitfield FTM_COMBINE_SYNCEN2. */
#define BF_FTM_COMBINE_SYNCEN2(v) ((uint32_t)((uint32_t)(v) << BP_FTM_COMBINE_SYNCEN2) & BM_FTM_COMBINE_SYNCEN2)

/*! @brief Set the SYNCEN2 field to a new value. */
#define BW_FTM_COMBINE_SYNCEN2(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_SYNCEN2) = (v))
/*@}*/

/*!
 * @name Register FTM_COMBINE, field FAULTEN2[22] (RW)
 *
 * Enables the fault control in channels (n) and (n+1). This field is write
 * protected. It can be written only when MODE[WPDIS] = 1.
 *
 * Values:
 * - 0 - The fault control in this pair of channels is disabled.
 * - 1 - The fault control in this pair of channels is enabled.
 */
/*@{*/
#define BP_FTM_COMBINE_FAULTEN2 (22U)      /*!< Bit position for FTM_COMBINE_FAULTEN2. */
#define BM_FTM_COMBINE_FAULTEN2 (0x00400000U) /*!< Bit mask for FTM_COMBINE_FAULTEN2. */
#define BS_FTM_COMBINE_FAULTEN2 (1U)       /*!< Bit field size in bits for FTM_COMBINE_FAULTEN2. */

/*! @brief Read current value of the FTM_COMBINE_FAULTEN2 field. */
#define BR_FTM_COMBINE_FAULTEN2(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_FAULTEN2))

/*! @brief Format value for bitfield FTM_COMBINE_FAULTEN2. */
#define BF_FTM_COMBINE_FAULTEN2(v) ((uint32_t)((uint32_t)(v) << BP_FTM_COMBINE_FAULTEN2) & BM_FTM_COMBINE_FAULTEN2)

/*! @brief Set the FAULTEN2 field to a new value. */
#define BW_FTM_COMBINE_FAULTEN2(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_FAULTEN2) = (v))
/*@}*/

/*!
 * @name Register FTM_COMBINE, field COMBINE3[24] (RW)
 *
 * Enables the combine feature for channels (n) and (n+1). This field is write
 * protected. It can be written only when MODE[WPDIS] = 1.
 *
 * Values:
 * - 0 - Channels (n) and (n+1) are independent.
 * - 1 - Channels (n) and (n+1) are combined.
 */
/*@{*/
#define BP_FTM_COMBINE_COMBINE3 (24U)      /*!< Bit position for FTM_COMBINE_COMBINE3. */
#define BM_FTM_COMBINE_COMBINE3 (0x01000000U) /*!< Bit mask for FTM_COMBINE_COMBINE3. */
#define BS_FTM_COMBINE_COMBINE3 (1U)       /*!< Bit field size in bits for FTM_COMBINE_COMBINE3. */

/*! @brief Read current value of the FTM_COMBINE_COMBINE3 field. */
#define BR_FTM_COMBINE_COMBINE3(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_COMBINE3))

/*! @brief Format value for bitfield FTM_COMBINE_COMBINE3. */
#define BF_FTM_COMBINE_COMBINE3(v) ((uint32_t)((uint32_t)(v) << BP_FTM_COMBINE_COMBINE3) & BM_FTM_COMBINE_COMBINE3)

/*! @brief Set the COMBINE3 field to a new value. */
#define BW_FTM_COMBINE_COMBINE3(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_COMBINE3) = (v))
/*@}*/

/*!
 * @name Register FTM_COMBINE, field COMP3[25] (RW)
 *
 * Enables Complementary mode for the combined channels. In Complementary mode
 * the channel (n+1) output is the inverse of the channel (n) output. This field
 * is write protected. It can be written only when MODE[WPDIS] = 1.
 *
 * Values:
 * - 0 - The channel (n+1) output is the same as the channel (n) output.
 * - 1 - The channel (n+1) output is the complement of the channel (n) output.
 */
/*@{*/
#define BP_FTM_COMBINE_COMP3 (25U)         /*!< Bit position for FTM_COMBINE_COMP3. */
#define BM_FTM_COMBINE_COMP3 (0x02000000U) /*!< Bit mask for FTM_COMBINE_COMP3. */
#define BS_FTM_COMBINE_COMP3 (1U)          /*!< Bit field size in bits for FTM_COMBINE_COMP3. */

/*! @brief Read current value of the FTM_COMBINE_COMP3 field. */
#define BR_FTM_COMBINE_COMP3(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_COMP3))

/*! @brief Format value for bitfield FTM_COMBINE_COMP3. */
#define BF_FTM_COMBINE_COMP3(v) ((uint32_t)((uint32_t)(v) << BP_FTM_COMBINE_COMP3) & BM_FTM_COMBINE_COMP3)

/*! @brief Set the COMP3 field to a new value. */
#define BW_FTM_COMBINE_COMP3(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_COMP3) = (v))
/*@}*/

/*!
 * @name Register FTM_COMBINE, field DECAPEN3[26] (RW)
 *
 * Enables the Dual Edge Capture mode in the channels (n) and (n+1). This bit
 * reconfigures the function of MSnA, ELSnB:ELSnA and ELS(n+1)B:ELS(n+1)A bits in
 * Dual Edge Capture mode according to #ModeSel1Table. This field applies only
 * when FTMEN = 1. This field is write protected. It can be written only when
 * MODE[WPDIS] = 1.
 *
 * Values:
 * - 0 - The Dual Edge Capture mode in this pair of channels is disabled.
 * - 1 - The Dual Edge Capture mode in this pair of channels is enabled.
 */
/*@{*/
#define BP_FTM_COMBINE_DECAPEN3 (26U)      /*!< Bit position for FTM_COMBINE_DECAPEN3. */
#define BM_FTM_COMBINE_DECAPEN3 (0x04000000U) /*!< Bit mask for FTM_COMBINE_DECAPEN3. */
#define BS_FTM_COMBINE_DECAPEN3 (1U)       /*!< Bit field size in bits for FTM_COMBINE_DECAPEN3. */

/*! @brief Read current value of the FTM_COMBINE_DECAPEN3 field. */
#define BR_FTM_COMBINE_DECAPEN3(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_DECAPEN3))

/*! @brief Format value for bitfield FTM_COMBINE_DECAPEN3. */
#define BF_FTM_COMBINE_DECAPEN3(v) ((uint32_t)((uint32_t)(v) << BP_FTM_COMBINE_DECAPEN3) & BM_FTM_COMBINE_DECAPEN3)

/*! @brief Set the DECAPEN3 field to a new value. */
#define BW_FTM_COMBINE_DECAPEN3(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_DECAPEN3) = (v))
/*@}*/

/*!
 * @name Register FTM_COMBINE, field DECAP3[27] (RW)
 *
 * Enables the capture of the FTM counter value according to the channel (n)
 * input event and the configuration of the dual edge capture bits. This field
 * applies only when FTMEN = 1 and DECAPEN = 1. DECAP bit is cleared automatically by
 * hardware if dual edge capture - one-shot mode is selected and when the capture
 * of channel (n+1) event is made.
 *
 * Values:
 * - 0 - The dual edge captures are inactive.
 * - 1 - The dual edge captures are active.
 */
/*@{*/
#define BP_FTM_COMBINE_DECAP3 (27U)        /*!< Bit position for FTM_COMBINE_DECAP3. */
#define BM_FTM_COMBINE_DECAP3 (0x08000000U) /*!< Bit mask for FTM_COMBINE_DECAP3. */
#define BS_FTM_COMBINE_DECAP3 (1U)         /*!< Bit field size in bits for FTM_COMBINE_DECAP3. */

/*! @brief Read current value of the FTM_COMBINE_DECAP3 field. */
#define BR_FTM_COMBINE_DECAP3(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_DECAP3))

/*! @brief Format value for bitfield FTM_COMBINE_DECAP3. */
#define BF_FTM_COMBINE_DECAP3(v) ((uint32_t)((uint32_t)(v) << BP_FTM_COMBINE_DECAP3) & BM_FTM_COMBINE_DECAP3)

/*! @brief Set the DECAP3 field to a new value. */
#define BW_FTM_COMBINE_DECAP3(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_DECAP3) = (v))
/*@}*/

/*!
 * @name Register FTM_COMBINE, field DTEN3[28] (RW)
 *
 * Enables the deadtime insertion in the channels (n) and (n+1). This field is
 * write protected. It can be written only when MODE[WPDIS] = 1.
 *
 * Values:
 * - 0 - The deadtime insertion in this pair of channels is disabled.
 * - 1 - The deadtime insertion in this pair of channels is enabled.
 */
/*@{*/
#define BP_FTM_COMBINE_DTEN3 (28U)         /*!< Bit position for FTM_COMBINE_DTEN3. */
#define BM_FTM_COMBINE_DTEN3 (0x10000000U) /*!< Bit mask for FTM_COMBINE_DTEN3. */
#define BS_FTM_COMBINE_DTEN3 (1U)          /*!< Bit field size in bits for FTM_COMBINE_DTEN3. */

/*! @brief Read current value of the FTM_COMBINE_DTEN3 field. */
#define BR_FTM_COMBINE_DTEN3(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_DTEN3))

/*! @brief Format value for bitfield FTM_COMBINE_DTEN3. */
#define BF_FTM_COMBINE_DTEN3(v) ((uint32_t)((uint32_t)(v) << BP_FTM_COMBINE_DTEN3) & BM_FTM_COMBINE_DTEN3)

/*! @brief Set the DTEN3 field to a new value. */
#define BW_FTM_COMBINE_DTEN3(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_DTEN3) = (v))
/*@}*/

/*!
 * @name Register FTM_COMBINE, field SYNCEN3[29] (RW)
 *
 * Enables PWM synchronization of registers C(n)V and C(n+1)V.
 *
 * Values:
 * - 0 - The PWM synchronization in this pair of channels is disabled.
 * - 1 - The PWM synchronization in this pair of channels is enabled.
 */
/*@{*/
#define BP_FTM_COMBINE_SYNCEN3 (29U)       /*!< Bit position for FTM_COMBINE_SYNCEN3. */
#define BM_FTM_COMBINE_SYNCEN3 (0x20000000U) /*!< Bit mask for FTM_COMBINE_SYNCEN3. */
#define BS_FTM_COMBINE_SYNCEN3 (1U)        /*!< Bit field size in bits for FTM_COMBINE_SYNCEN3. */

/*! @brief Read current value of the FTM_COMBINE_SYNCEN3 field. */
#define BR_FTM_COMBINE_SYNCEN3(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_SYNCEN3))

/*! @brief Format value for bitfield FTM_COMBINE_SYNCEN3. */
#define BF_FTM_COMBINE_SYNCEN3(v) ((uint32_t)((uint32_t)(v) << BP_FTM_COMBINE_SYNCEN3) & BM_FTM_COMBINE_SYNCEN3)

/*! @brief Set the SYNCEN3 field to a new value. */
#define BW_FTM_COMBINE_SYNCEN3(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_SYNCEN3) = (v))
/*@}*/

/*!
 * @name Register FTM_COMBINE, field FAULTEN3[30] (RW)
 *
 * Enables the fault control in channels (n) and (n+1). This field is write
 * protected. It can be written only when MODE[WPDIS] = 1.
 *
 * Values:
 * - 0 - The fault control in this pair of channels is disabled.
 * - 1 - The fault control in this pair of channels is enabled.
 */
/*@{*/
#define BP_FTM_COMBINE_FAULTEN3 (30U)      /*!< Bit position for FTM_COMBINE_FAULTEN3. */
#define BM_FTM_COMBINE_FAULTEN3 (0x40000000U) /*!< Bit mask for FTM_COMBINE_FAULTEN3. */
#define BS_FTM_COMBINE_FAULTEN3 (1U)       /*!< Bit field size in bits for FTM_COMBINE_FAULTEN3. */

/*! @brief Read current value of the FTM_COMBINE_FAULTEN3 field. */
#define BR_FTM_COMBINE_FAULTEN3(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_FAULTEN3))

/*! @brief Format value for bitfield FTM_COMBINE_FAULTEN3. */
#define BF_FTM_COMBINE_FAULTEN3(v) ((uint32_t)((uint32_t)(v) << BP_FTM_COMBINE_FAULTEN3) & BM_FTM_COMBINE_FAULTEN3)

/*! @brief Set the FAULTEN3 field to a new value. */
#define BW_FTM_COMBINE_FAULTEN3(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_FAULTEN3) = (v))
/*@}*/

/*******************************************************************************
 * HW_FTM_DEADTIME - Deadtime Insertion Control
 ******************************************************************************/

/*!
 * @brief HW_FTM_DEADTIME - Deadtime Insertion Control (RW)
 *
 * Reset value: 0x00000000U
 *
 * This register selects the deadtime prescaler factor and deadtime value. All
 * FTM channels use this clock prescaler and this deadtime value for the deadtime
 * insertion.
 */
typedef union _hw_ftm_deadtime
{
    uint32_t U;
    struct _hw_ftm_deadtime_bitfields
    {
        uint32_t DTVAL : 6;            /*!< [5:0] Deadtime Value */
        uint32_t DTPS : 2;             /*!< [7:6] Deadtime Prescaler Value */
        uint32_t RESERVED0 : 24;       /*!< [31:8]  */
    } B;
} hw_ftm_deadtime_t;

/*!
 * @name Constants and macros for entire FTM_DEADTIME register
 */
/*@{*/
#define HW_FTM_DEADTIME_ADDR(x)  ((x) + 0x68U)

#define HW_FTM_DEADTIME(x)       (*(__IO hw_ftm_deadtime_t *) HW_FTM_DEADTIME_ADDR(x))
#define HW_FTM_DEADTIME_RD(x)    (HW_FTM_DEADTIME(x).U)
#define HW_FTM_DEADTIME_WR(x, v) (HW_FTM_DEADTIME(x).U = (v))
#define HW_FTM_DEADTIME_SET(x, v) (HW_FTM_DEADTIME_WR(x, HW_FTM_DEADTIME_RD(x) |  (v)))
#define HW_FTM_DEADTIME_CLR(x, v) (HW_FTM_DEADTIME_WR(x, HW_FTM_DEADTIME_RD(x) & ~(v)))
#define HW_FTM_DEADTIME_TOG(x, v) (HW_FTM_DEADTIME_WR(x, HW_FTM_DEADTIME_RD(x) ^  (v)))
/*@}*/

/*
 * Constants & macros for individual FTM_DEADTIME bitfields
 */

/*!
 * @name Register FTM_DEADTIME, field DTVAL[5:0] (RW)
 *
 * Selects the deadtime insertion value for the deadtime counter. The deadtime
 * counter is clocked by a scaled version of the system clock. See the description
 * of DTPS. Deadtime insert value = (DTPS * DTVAL). DTVAL selects the number of
 * deadtime counts inserted as follows: When DTVAL is 0, no counts are inserted.
 * When DTVAL is 1, 1 count is inserted. When DTVAL is 2, 2 counts are inserted.
 * This pattern continues up to a possible 63 counts. This field is write
 * protected. It can be written only when MODE[WPDIS] = 1.
 */
/*@{*/
#define BP_FTM_DEADTIME_DTVAL (0U)         /*!< Bit position for FTM_DEADTIME_DTVAL. */
#define BM_FTM_DEADTIME_DTVAL (0x0000003FU) /*!< Bit mask for FTM_DEADTIME_DTVAL. */
#define BS_FTM_DEADTIME_DTVAL (6U)         /*!< Bit field size in bits for FTM_DEADTIME_DTVAL. */

/*! @brief Read current value of the FTM_DEADTIME_DTVAL field. */
#define BR_FTM_DEADTIME_DTVAL(x) (HW_FTM_DEADTIME(x).B.DTVAL)

/*! @brief Format value for bitfield FTM_DEADTIME_DTVAL. */
#define BF_FTM_DEADTIME_DTVAL(v) ((uint32_t)((uint32_t)(v) << BP_FTM_DEADTIME_DTVAL) & BM_FTM_DEADTIME_DTVAL)

/*! @brief Set the DTVAL field to a new value. */
#define BW_FTM_DEADTIME_DTVAL(x, v) (HW_FTM_DEADTIME_WR(x, (HW_FTM_DEADTIME_RD(x) & ~BM_FTM_DEADTIME_DTVAL) | BF_FTM_DEADTIME_DTVAL(v)))
/*@}*/

/*!
 * @name Register FTM_DEADTIME, field DTPS[7:6] (RW)
 *
 * Selects the division factor of the system clock. This prescaled clock is used
 * by the deadtime counter. This field is write protected. It can be written
 * only when MODE[WPDIS] = 1.
 *
 * Values:
 * - 0x - Divide the system clock by 1.
 * - 10 - Divide the system clock by 4.
 * - 11 - Divide the system clock by 16.
 */
/*@{*/
#define BP_FTM_DEADTIME_DTPS (6U)          /*!< Bit position for FTM_DEADTIME_DTPS. */
#define BM_FTM_DEADTIME_DTPS (0x000000C0U) /*!< Bit mask for FTM_DEADTIME_DTPS. */
#define BS_FTM_DEADTIME_DTPS (2U)          /*!< Bit field size in bits for FTM_DEADTIME_DTPS. */

/*! @brief Read current value of the FTM_DEADTIME_DTPS field. */
#define BR_FTM_DEADTIME_DTPS(x) (HW_FTM_DEADTIME(x).B.DTPS)

/*! @brief Format value for bitfield FTM_DEADTIME_DTPS. */
#define BF_FTM_DEADTIME_DTPS(v) ((uint32_t)((uint32_t)(v) << BP_FTM_DEADTIME_DTPS) & BM_FTM_DEADTIME_DTPS)

/*! @brief Set the DTPS field to a new value. */
#define BW_FTM_DEADTIME_DTPS(x, v) (HW_FTM_DEADTIME_WR(x, (HW_FTM_DEADTIME_RD(x) & ~BM_FTM_DEADTIME_DTPS) | BF_FTM_DEADTIME_DTPS(v)))
/*@}*/

/*******************************************************************************
 * HW_FTM_EXTTRIG - FTM External Trigger
 ******************************************************************************/

/*!
 * @brief HW_FTM_EXTTRIG - FTM External Trigger (RW)
 *
 * Reset value: 0x00000000U
 *
 * This register: Indicates when a channel trigger was generated Enables the
 * generation of a trigger when the FTM counter is equal to its initial value
 * Selects which channels are used in the generation of the channel triggers Several
 * channels can be selected to generate multiple triggers in one PWM period.
 * Channels 6 and 7 are not used to generate channel triggers.
 */
typedef union _hw_ftm_exttrig
{
    uint32_t U;
    struct _hw_ftm_exttrig_bitfields
    {
        uint32_t CH2TRIG : 1;          /*!< [0] Channel 2 Trigger Enable */
        uint32_t CH3TRIG : 1;          /*!< [1] Channel 3 Trigger Enable */
        uint32_t CH4TRIG : 1;          /*!< [2] Channel 4 Trigger Enable */
        uint32_t CH5TRIG : 1;          /*!< [3] Channel 5 Trigger Enable */
        uint32_t CH0TRIG : 1;          /*!< [4] Channel 0 Trigger Enable */
        uint32_t CH1TRIG : 1;          /*!< [5] Channel 1 Trigger Enable */
        uint32_t INITTRIGEN : 1;       /*!< [6] Initialization Trigger Enable */
        uint32_t TRIGF : 1;            /*!< [7] Channel Trigger Flag */
        uint32_t RESERVED0 : 24;       /*!< [31:8]  */
    } B;
} hw_ftm_exttrig_t;

/*!
 * @name Constants and macros for entire FTM_EXTTRIG register
 */
/*@{*/
#define HW_FTM_EXTTRIG_ADDR(x)   ((x) + 0x6CU)

#define HW_FTM_EXTTRIG(x)        (*(__IO hw_ftm_exttrig_t *) HW_FTM_EXTTRIG_ADDR(x))
#define HW_FTM_EXTTRIG_RD(x)     (HW_FTM_EXTTRIG(x).U)
#define HW_FTM_EXTTRIG_WR(x, v)  (HW_FTM_EXTTRIG(x).U = (v))
#define HW_FTM_EXTTRIG_SET(x, v) (HW_FTM_EXTTRIG_WR(x, HW_FTM_EXTTRIG_RD(x) |  (v)))
#define HW_FTM_EXTTRIG_CLR(x, v) (HW_FTM_EXTTRIG_WR(x, HW_FTM_EXTTRIG_RD(x) & ~(v)))
#define HW_FTM_EXTTRIG_TOG(x, v) (HW_FTM_EXTTRIG_WR(x, HW_FTM_EXTTRIG_RD(x) ^  (v)))
/*@}*/

/*
 * Constants & macros for individual FTM_EXTTRIG bitfields
 */

/*!
 * @name Register FTM_EXTTRIG, field CH2TRIG[0] (RW)
 *
 * Enables the generation of the channel trigger when the FTM counter is equal
 * to the CnV register.
 *
 * Values:
 * - 0 - The generation of the channel trigger is disabled.
 * - 1 - The generation of the channel trigger is enabled.
 */
/*@{*/
#define BP_FTM_EXTTRIG_CH2TRIG (0U)        /*!< Bit position for FTM_EXTTRIG_CH2TRIG. */
#define BM_FTM_EXTTRIG_CH2TRIG (0x00000001U) /*!< Bit mask for FTM_EXTTRIG_CH2TRIG. */
#define BS_FTM_EXTTRIG_CH2TRIG (1U)        /*!< Bit field size in bits for FTM_EXTTRIG_CH2TRIG. */

/*! @brief Read current value of the FTM_EXTTRIG_CH2TRIG field. */
#define BR_FTM_EXTTRIG_CH2TRIG(x) (BITBAND_ACCESS32(HW_FTM_EXTTRIG_ADDR(x), BP_FTM_EXTTRIG_CH2TRIG))

/*! @brief Format value for bitfield FTM_EXTTRIG_CH2TRIG. */
#define BF_FTM_EXTTRIG_CH2TRIG(v) ((uint32_t)((uint32_t)(v) << BP_FTM_EXTTRIG_CH2TRIG) & BM_FTM_EXTTRIG_CH2TRIG)

/*! @brief Set the CH2TRIG field to a new value. */
#define BW_FTM_EXTTRIG_CH2TRIG(x, v) (BITBAND_ACCESS32(HW_FTM_EXTTRIG_ADDR(x), BP_FTM_EXTTRIG_CH2TRIG) = (v))
/*@}*/

/*!
 * @name Register FTM_EXTTRIG, field CH3TRIG[1] (RW)
 *
 * Enables the generation of the channel trigger when the FTM counter is equal
 * to the CnV register.
 *
 * Values:
 * - 0 - The generation of the channel trigger is disabled.
 * - 1 - The generation of the channel trigger is enabled.
 */
/*@{*/
#define BP_FTM_EXTTRIG_CH3TRIG (1U)        /*!< Bit position for FTM_EXTTRIG_CH3TRIG. */
#define BM_FTM_EXTTRIG_CH3TRIG (0x00000002U) /*!< Bit mask for FTM_EXTTRIG_CH3TRIG. */
#define BS_FTM_EXTTRIG_CH3TRIG (1U)        /*!< Bit field size in bits for FTM_EXTTRIG_CH3TRIG. */

/*! @brief Read current value of the FTM_EXTTRIG_CH3TRIG field. */
#define BR_FTM_EXTTRIG_CH3TRIG(x) (BITBAND_ACCESS32(HW_FTM_EXTTRIG_ADDR(x), BP_FTM_EXTTRIG_CH3TRIG))

/*! @brief Format value for bitfield FTM_EXTTRIG_CH3TRIG. */
#define BF_FTM_EXTTRIG_CH3TRIG(v) ((uint32_t)((uint32_t)(v) << BP_FTM_EXTTRIG_CH3TRIG) & BM_FTM_EXTTRIG_CH3TRIG)

/*! @brief Set the CH3TRIG field to a new value. */
#define BW_FTM_EXTTRIG_CH3TRIG(x, v) (BITBAND_ACCESS32(HW_FTM_EXTTRIG_ADDR(x), BP_FTM_EXTTRIG_CH3TRIG) = (v))
/*@}*/

/*!
 * @name Register FTM_EXTTRIG, field CH4TRIG[2] (RW)
 *
 * Enables the generation of the channel trigger when the FTM counter is equal
 * to the CnV register.
 *
 * Values:
 * - 0 - The generation of the channel trigger is disabled.
 * - 1 - The generation of the channel trigger is enabled.
 */
/*@{*/
#define BP_FTM_EXTTRIG_CH4TRIG (2U)        /*!< Bit position for FTM_EXTTRIG_CH4TRIG. */
#define BM_FTM_EXTTRIG_CH4TRIG (0x00000004U) /*!< Bit mask for FTM_EXTTRIG_CH4TRIG. */
#define BS_FTM_EXTTRIG_CH4TRIG (1U)        /*!< Bit field size in bits for FTM_EXTTRIG_CH4TRIG. */

/*! @brief Read current value of the FTM_EXTTRIG_CH4TRIG field. */
#define BR_FTM_EXTTRIG_CH4TRIG(x) (BITBAND_ACCESS32(HW_FTM_EXTTRIG_ADDR(x), BP_FTM_EXTTRIG_CH4TRIG))

/*! @brief Format value for bitfield FTM_EXTTRIG_CH4TRIG. */
#define BF_FTM_EXTTRIG_CH4TRIG(v) ((uint32_t)((uint32_t)(v) << BP_FTM_EXTTRIG_CH4TRIG) & BM_FTM_EXTTRIG_CH4TRIG)

/*! @brief Set the CH4TRIG field to a new value. */
#define BW_FTM_EXTTRIG_CH4TRIG(x, v) (BITBAND_ACCESS32(HW_FTM_EXTTRIG_ADDR(x), BP_FTM_EXTTRIG_CH4TRIG) = (v))
/*@}*/

/*!
 * @name Register FTM_EXTTRIG, field CH5TRIG[3] (RW)
 *
 * Enables the generation of the channel trigger when the FTM counter is equal
 * to the CnV register.
 *
 * Values:
 * - 0 - The generation of the channel trigger is disabled.
 * - 1 - The generation of the channel trigger is enabled.
 */
/*@{*/
#define BP_FTM_EXTTRIG_CH5TRIG (3U)        /*!< Bit position for FTM_EXTTRIG_CH5TRIG. */
#define BM_FTM_EXTTRIG_CH5TRIG (0x00000008U) /*!< Bit mask for FTM_EXTTRIG_CH5TRIG. */
#define BS_FTM_EXTTRIG_CH5TRIG (1U)        /*!< Bit field size in bits for FTM_EXTTRIG_CH5TRIG. */

/*! @brief Read current value of the FTM_EXTTRIG_CH5TRIG field. */
#define BR_FTM_EXTTRIG_CH5TRIG(x) (BITBAND_ACCESS32(HW_FTM_EXTTRIG_ADDR(x), BP_FTM_EXTTRIG_CH5TRIG))

/*! @brief Format value for bitfield FTM_EXTTRIG_CH5TRIG. */
#define BF_FTM_EXTTRIG_CH5TRIG(v) ((uint32_t)((uint32_t)(v) << BP_FTM_EXTTRIG_CH5TRIG) & BM_FTM_EXTTRIG_CH5TRIG)

/*! @brief Set the CH5TRIG field to a new value. */
#define BW_FTM_EXTTRIG_CH5TRIG(x, v) (BITBAND_ACCESS32(HW_FTM_EXTTRIG_ADDR(x), BP_FTM_EXTTRIG_CH5TRIG) = (v))
/*@}*/

/*!
 * @name Register FTM_EXTTRIG, field CH0TRIG[4] (RW)
 *
 * Enables the generation of the channel trigger when the FTM counter is equal
 * to the CnV register.
 *
 * Values:
 * - 0 - The generation of the channel trigger is disabled.
 * - 1 - The generation of the channel trigger is enabled.
 */
/*@{*/
#define BP_FTM_EXTTRIG_CH0TRIG (4U)        /*!< Bit position for FTM_EXTTRIG_CH0TRIG. */
#define BM_FTM_EXTTRIG_CH0TRIG (0x00000010U) /*!< Bit mask for FTM_EXTTRIG_CH0TRIG. */
#define BS_FTM_EXTTRIG_CH0TRIG (1U)        /*!< Bit field size in bits for FTM_EXTTRIG_CH0TRIG. */

/*! @brief Read current value of the FTM_EXTTRIG_CH0TRIG field. */
#define BR_FTM_EXTTRIG_CH0TRIG(x) (BITBAND_ACCESS32(HW_FTM_EXTTRIG_ADDR(x), BP_FTM_EXTTRIG_CH0TRIG))

/*! @brief Format value for bitfield FTM_EXTTRIG_CH0TRIG. */
#define BF_FTM_EXTTRIG_CH0TRIG(v) ((uint32_t)((uint32_t)(v) << BP_FTM_EXTTRIG_CH0TRIG) & BM_FTM_EXTTRIG_CH0TRIG)

/*! @brief Set the CH0TRIG field to a new value. */
#define BW_FTM_EXTTRIG_CH0TRIG(x, v) (BITBAND_ACCESS32(HW_FTM_EXTTRIG_ADDR(x), BP_FTM_EXTTRIG_CH0TRIG) = (v))
/*@}*/

/*!
 * @name Register FTM_EXTTRIG, field CH1TRIG[5] (RW)
 *
 * Enables the generation of the channel trigger when the FTM counter is equal
 * to the CnV register.
 *
 * Values:
 * - 0 - The generation of the channel trigger is disabled.
 * - 1 - The generation of the channel trigger is enabled.
 */
/*@{*/
#define BP_FTM_EXTTRIG_CH1TRIG (5U)        /*!< Bit position for FTM_EXTTRIG_CH1TRIG. */
#define BM_FTM_EXTTRIG_CH1TRIG (0x00000020U) /*!< Bit mask for FTM_EXTTRIG_CH1TRIG. */
#define BS_FTM_EXTTRIG_CH1TRIG (1U)        /*!< Bit field size in bits for FTM_EXTTRIG_CH1TRIG. */

/*! @brief Read current value of the FTM_EXTTRIG_CH1TRIG field. */
#define BR_FTM_EXTTRIG_CH1TRIG(x) (BITBAND_ACCESS32(HW_FTM_EXTTRIG_ADDR(x), BP_FTM_EXTTRIG_CH1TRIG))

/*! @brief Format value for bitfield FTM_EXTTRIG_CH1TRIG. */
#define BF_FTM_EXTTRIG_CH1TRIG(v) ((uint32_t)((uint32_t)(v) << BP_FTM_EXTTRIG_CH1TRIG) & BM_FTM_EXTTRIG_CH1TRIG)

/*! @brief Set the CH1TRIG field to a new value. */
#define BW_FTM_EXTTRIG_CH1TRIG(x, v) (BITBAND_ACCESS32(HW_FTM_EXTTRIG_ADDR(x), BP_FTM_EXTTRIG_CH1TRIG) = (v))
/*@}*/

/*!
 * @name Register FTM_EXTTRIG, field INITTRIGEN[6] (RW)
 *
 * Enables the generation of the trigger when the FTM counter is equal to the
 * CNTIN register.
 *
 * Values:
 * - 0 - The generation of initialization trigger is disabled.
 * - 1 - The generation of initialization trigger is enabled.
 */
/*@{*/
#define BP_FTM_EXTTRIG_INITTRIGEN (6U)     /*!< Bit position for FTM_EXTTRIG_INITTRIGEN. */
#define BM_FTM_EXTTRIG_INITTRIGEN (0x00000040U) /*!< Bit mask for FTM_EXTTRIG_INITTRIGEN. */
#define BS_FTM_EXTTRIG_INITTRIGEN (1U)     /*!< Bit field size in bits for FTM_EXTTRIG_INITTRIGEN. */

/*! @brief Read current value of the FTM_EXTTRIG_INITTRIGEN field. */
#define BR_FTM_EXTTRIG_INITTRIGEN(x) (BITBAND_ACCESS32(HW_FTM_EXTTRIG_ADDR(x), BP_FTM_EXTTRIG_INITTRIGEN))

/*! @brief Format value for bitfield FTM_EXTTRIG_INITTRIGEN. */
#define BF_FTM_EXTTRIG_INITTRIGEN(v) ((uint32_t)((uint32_t)(v) << BP_FTM_EXTTRIG_INITTRIGEN) & BM_FTM_EXTTRIG_INITTRIGEN)

/*! @brief Set the INITTRIGEN field to a new value. */
#define BW_FTM_EXTTRIG_INITTRIGEN(x, v) (BITBAND_ACCESS32(HW_FTM_EXTTRIG_ADDR(x), BP_FTM_EXTTRIG_INITTRIGEN) = (v))
/*@}*/

/*!
 * @name Register FTM_EXTTRIG, field TRIGF[7] (ROWZ)
 *
 * Set by hardware when a channel trigger is generated. Clear TRIGF by reading
 * EXTTRIG while TRIGF is set and then writing a 0 to TRIGF. Writing a 1 to TRIGF
 * has no effect. If another channel trigger is generated before the clearing
 * sequence is completed, the sequence is reset so TRIGF remains set after the clear
 * sequence is completed for the earlier TRIGF.
 *
 * Values:
 * - 0 - No channel trigger was generated.
 * - 1 - A channel trigger was generated.
 */
/*@{*/
#define BP_FTM_EXTTRIG_TRIGF (7U)          /*!< Bit position for FTM_EXTTRIG_TRIGF. */
#define BM_FTM_EXTTRIG_TRIGF (0x00000080U) /*!< Bit mask for FTM_EXTTRIG_TRIGF. */
#define BS_FTM_EXTTRIG_TRIGF (1U)          /*!< Bit field size in bits for FTM_EXTTRIG_TRIGF. */

/*! @brief Read current value of the FTM_EXTTRIG_TRIGF field. */
#define BR_FTM_EXTTRIG_TRIGF(x) (BITBAND_ACCESS32(HW_FTM_EXTTRIG_ADDR(x), BP_FTM_EXTTRIG_TRIGF))

/*! @brief Format value for bitfield FTM_EXTTRIG_TRIGF. */
#define BF_FTM_EXTTRIG_TRIGF(v) ((uint32_t)((uint32_t)(v) << BP_FTM_EXTTRIG_TRIGF) & BM_FTM_EXTTRIG_TRIGF)

/*! @brief Set the TRIGF field to a new value. */
#define BW_FTM_EXTTRIG_TRIGF(x, v) (BITBAND_ACCESS32(HW_FTM_EXTTRIG_ADDR(x), BP_FTM_EXTTRIG_TRIGF) = (v))
/*@}*/

/*******************************************************************************
 * HW_FTM_POL - Channels Polarity
 ******************************************************************************/

/*!
 * @brief HW_FTM_POL - Channels Polarity (RW)
 *
 * Reset value: 0x00000000U
 *
 * This register defines the output polarity of the FTM channels. The safe value
 * that is driven in a channel output when the fault control is enabled and a
 * fault condition is detected is the inactive state of the channel. That is, the
 * safe value of a channel is the value of its POL bit.
 */
typedef union _hw_ftm_pol
{
    uint32_t U;
    struct _hw_ftm_pol_bitfields
    {
        uint32_t POL0 : 1;             /*!< [0] Channel 0 Polarity */
        uint32_t POL1 : 1;             /*!< [1] Channel 1 Polarity */
        uint32_t POL2 : 1;             /*!< [2] Channel 2 Polarity */
        uint32_t POL3 : 1;             /*!< [3] Channel 3 Polarity */
        uint32_t POL4 : 1;             /*!< [4] Channel 4 Polarity */
        uint32_t POL5 : 1;             /*!< [5] Channel 5 Polarity */
        uint32_t POL6 : 1;             /*!< [6] Channel 6 Polarity */
        uint32_t POL7 : 1;             /*!< [7] Channel 7 Polarity */
        uint32_t RESERVED0 : 24;       /*!< [31:8]  */
    } B;
} hw_ftm_pol_t;

/*!
 * @name Constants and macros for entire FTM_POL register
 */
/*@{*/
#define HW_FTM_POL_ADDR(x)       ((x) + 0x70U)

#define HW_FTM_POL(x)            (*(__IO hw_ftm_pol_t *) HW_FTM_POL_ADDR(x))
#define HW_FTM_POL_RD(x)         (HW_FTM_POL(x).U)
#define HW_FTM_POL_WR(x, v)      (HW_FTM_POL(x).U = (v))
#define HW_FTM_POL_SET(x, v)     (HW_FTM_POL_WR(x, HW_FTM_POL_RD(x) |  (v)))
#define HW_FTM_POL_CLR(x, v)     (HW_FTM_POL_WR(x, HW_FTM_POL_RD(x) & ~(v)))
#define HW_FTM_POL_TOG(x, v)     (HW_FTM_POL_WR(x, HW_FTM_POL_RD(x) ^  (v)))
/*@}*/

/*
 * Constants & macros for individual FTM_POL bitfields
 */

/*!
 * @name Register FTM_POL, field POL0[0] (RW)
 *
 * Defines the polarity of the channel output. This field is write protected. It
 * can be written only when MODE[WPDIS] = 1.
 *
 * Values:
 * - 0 - The channel polarity is active high.
 * - 1 - The channel polarity is active low.
 */
/*@{*/
#define BP_FTM_POL_POL0      (0U)          /*!< Bit position for FTM_POL_POL0. */
#define BM_FTM_POL_POL0      (0x00000001U) /*!< Bit mask for FTM_POL_POL0. */
#define BS_FTM_POL_POL0      (1U)          /*!< Bit field size in bits for FTM_POL_POL0. */

/*! @brief Read current value of the FTM_POL_POL0 field. */
#define BR_FTM_POL_POL0(x)   (BITBAND_ACCESS32(HW_FTM_POL_ADDR(x), BP_FTM_POL_POL0))

/*! @brief Format value for bitfield FTM_POL_POL0. */
#define BF_FTM_POL_POL0(v)   ((uint32_t)((uint32_t)(v) << BP_FTM_POL_POL0) & BM_FTM_POL_POL0)

/*! @brief Set the POL0 field to a new value. */
#define BW_FTM_POL_POL0(x, v) (BITBAND_ACCESS32(HW_FTM_POL_ADDR(x), BP_FTM_POL_POL0) = (v))
/*@}*/

/*!
 * @name Register FTM_POL, field POL1[1] (RW)
 *
 * Defines the polarity of the channel output. This field is write protected. It
 * can be written only when MODE[WPDIS] = 1.
 *
 * Values:
 * - 0 - The channel polarity is active high.
 * - 1 - The channel polarity is active low.
 */
/*@{*/
#define BP_FTM_POL_POL1      (1U)          /*!< Bit position for FTM_POL_POL1. */
#define BM_FTM_POL_POL1      (0x00000002U) /*!< Bit mask for FTM_POL_POL1. */
#define BS_FTM_POL_POL1      (1U)          /*!< Bit field size in bits for FTM_POL_POL1. */

/*! @brief Read current value of the FTM_POL_POL1 field. */
#define BR_FTM_POL_POL1(x)   (BITBAND_ACCESS32(HW_FTM_POL_ADDR(x), BP_FTM_POL_POL1))

/*! @brief Format value for bitfield FTM_POL_POL1. */
#define BF_FTM_POL_POL1(v)   ((uint32_t)((uint32_t)(v) << BP_FTM_POL_POL1) & BM_FTM_POL_POL1)

/*! @brief Set the POL1 field to a new value. */
#define BW_FTM_POL_POL1(x, v) (BITBAND_ACCESS32(HW_FTM_POL_ADDR(x), BP_FTM_POL_POL1) = (v))
/*@}*/

/*!
 * @name Register FTM_POL, field POL2[2] (RW)
 *
 * Defines the polarity of the channel output. This field is write protected. It
 * can be written only when MODE[WPDIS] = 1.
 *
 * Values:
 * - 0 - The channel polarity is active high.
 * - 1 - The channel polarity is active low.
 */
/*@{*/
#define BP_FTM_POL_POL2      (2U)          /*!< Bit position for FTM_POL_POL2. */
#define BM_FTM_POL_POL2      (0x00000004U) /*!< Bit mask for FTM_POL_POL2. */
#define BS_FTM_POL_POL2      (1U)          /*!< Bit field size in bits for FTM_POL_POL2. */

/*! @brief Read current value of the FTM_POL_POL2 field. */
#define BR_FTM_POL_POL2(x)   (BITBAND_ACCESS32(HW_FTM_POL_ADDR(x), BP_FTM_POL_POL2))

/*! @brief Format value for bitfield FTM_POL_POL2. */
#define BF_FTM_POL_POL2(v)   ((uint32_t)((uint32_t)(v) << BP_FTM_POL_POL2) & BM_FTM_POL_POL2)

/*! @brief Set the POL2 field to a new value. */
#define BW_FTM_POL_POL2(x, v) (BITBAND_ACCESS32(HW_FTM_POL_ADDR(x), BP_FTM_POL_POL2) = (v))
/*@}*/

/*!
 * @name Register FTM_POL, field POL3[3] (RW)
 *
 * Defines the polarity of the channel output. This field is write protected. It
 * can be written only when MODE[WPDIS] = 1.
 *
 * Values:
 * - 0 - The channel polarity is active high.
 * - 1 - The channel polarity is active low.
 */
/*@{*/
#define BP_FTM_POL_POL3      (3U)          /*!< Bit position for FTM_POL_POL3. */
#define BM_FTM_POL_POL3      (0x00000008U) /*!< Bit mask for FTM_POL_POL3. */
#define BS_FTM_POL_POL3      (1U)          /*!< Bit field size in bits for FTM_POL_POL3. */

/*! @brief Read current value of the FTM_POL_POL3 field. */
#define BR_FTM_POL_POL3(x)   (BITBAND_ACCESS32(HW_FTM_POL_ADDR(x), BP_FTM_POL_POL3))

/*! @brief Format value for bitfield FTM_POL_POL3. */
#define BF_FTM_POL_POL3(v)   ((uint32_t)((uint32_t)(v) << BP_FTM_POL_POL3) & BM_FTM_POL_POL3)

/*! @brief Set the POL3 field to a new value. */
#define BW_FTM_POL_POL3(x, v) (BITBAND_ACCESS32(HW_FTM_POL_ADDR(x), BP_FTM_POL_POL3) = (v))
/*@}*/

/*!
 * @name Register FTM_POL, field POL4[4] (RW)
 *
 * Defines the polarity of the channel output. This field is write protected. It
 * can be written only when MODE[WPDIS] = 1.
 *
 * Values:
 * - 0 - The channel polarity is active high.
 * - 1 - The channel polarity is active low.
 */
/*@{*/
#define BP_FTM_POL_POL4      (4U)          /*!< Bit position for FTM_POL_POL4. */
#define BM_FTM_POL_POL4      (0x00000010U) /*!< Bit mask for FTM_POL_POL4. */
#define BS_FTM_POL_POL4      (1U)          /*!< Bit field size in bits for FTM_POL_POL4. */

/*! @brief Read current value of the FTM_POL_POL4 field. */
#define BR_FTM_POL_POL4(x)   (BITBAND_ACCESS32(HW_FTM_POL_ADDR(x), BP_FTM_POL_POL4))

/*! @brief Format value for bitfield FTM_POL_POL4. */
#define BF_FTM_POL_POL4(v)   ((uint32_t)((uint32_t)(v) << BP_FTM_POL_POL4) & BM_FTM_POL_POL4)

/*! @brief Set the POL4 field to a new value. */
#define BW_FTM_POL_POL4(x, v) (BITBAND_ACCESS32(HW_FTM_POL_ADDR(x), BP_FTM_POL_POL4) = (v))
/*@}*/

/*!
 * @name Register FTM_POL, field POL5[5] (RW)
 *
 * Defines the polarity of the channel output. This field is write protected. It
 * can be written only when MODE[WPDIS] = 1.
 *
 * Values:
 * - 0 - The channel polarity is active high.
 * - 1 - The channel polarity is active low.
 */
/*@{*/
#define BP_FTM_POL_POL5      (5U)          /*!< Bit position for FTM_POL_POL5. */
#define BM_FTM_POL_POL5      (0x00000020U) /*!< Bit mask for FTM_POL_POL5. */
#define BS_FTM_POL_POL5      (1U)          /*!< Bit field size in bits for FTM_POL_POL5. */

/*! @brief Read current value of the FTM_POL_POL5 field. */
#define BR_FTM_POL_POL5(x)   (BITBAND_ACCESS32(HW_FTM_POL_ADDR(x), BP_FTM_POL_POL5))

/*! @brief Format value for bitfield FTM_POL_POL5. */
#define BF_FTM_POL_POL5(v)   ((uint32_t)((uint32_t)(v) << BP_FTM_POL_POL5) & BM_FTM_POL_POL5)

/*! @brief Set the POL5 field to a new value. */
#define BW_FTM_POL_POL5(x, v) (BITBAND_ACCESS32(HW_FTM_POL_ADDR(x), BP_FTM_POL_POL5) = (v))
/*@}*/

/*!
 * @name Register FTM_POL, field POL6[6] (RW)
 *
 * Defines the polarity of the channel output. This field is write protected. It
 * can be written only when MODE[WPDIS] = 1.
 *
 * Values:
 * - 0 - The channel polarity is active high.
 * - 1 - The channel polarity is active low.
 */
/*@{*/
#define BP_FTM_POL_POL6      (6U)          /*!< Bit position for FTM_POL_POL6. */
#define BM_FTM_POL_POL6      (0x00000040U) /*!< Bit mask for FTM_POL_POL6. */
#define BS_FTM_POL_POL6      (1U)          /*!< Bit field size in bits for FTM_POL_POL6. */

/*! @brief Read current value of the FTM_POL_POL6 field. */
#define BR_FTM_POL_POL6(x)   (BITBAND_ACCESS32(HW_FTM_POL_ADDR(x), BP_FTM_POL_POL6))

/*! @brief Format value for bitfield FTM_POL_POL6. */
#define BF_FTM_POL_POL6(v)   ((uint32_t)((uint32_t)(v) << BP_FTM_POL_POL6) & BM_FTM_POL_POL6)

/*! @brief Set the POL6 field to a new value. */
#define BW_FTM_POL_POL6(x, v) (BITBAND_ACCESS32(HW_FTM_POL_ADDR(x), BP_FTM_POL_POL6) = (v))
/*@}*/

/*!
 * @name Register FTM_POL, field POL7[7] (RW)
 *
 * Defines the polarity of the channel output. This field is write protected. It
 * can be written only when MODE[WPDIS] = 1.
 *
 * Values:
 * - 0 - The channel polarity is active high.
 * - 1 - The channel polarity is active low.
 */
/*@{*/
#define BP_FTM_POL_POL7      (7U)          /*!< Bit position for FTM_POL_POL7. */
#define BM_FTM_POL_POL7      (0x00000080U) /*!< Bit mask for FTM_POL_POL7. */
#define BS_FTM_POL_POL7      (1U)          /*!< Bit field size in bits for FTM_POL_POL7. */

/*! @brief Read current value of the FTM_POL_POL7 field. */
#define BR_FTM_POL_POL7(x)   (BITBAND_ACCESS32(HW_FTM_POL_ADDR(x), BP_FTM_POL_POL7))

/*! @brief Format value for bitfield FTM_POL_POL7. */
#define BF_FTM_POL_POL7(v)   ((uint32_t)((uint32_t)(v) << BP_FTM_POL_POL7) & BM_FTM_POL_POL7)

/*! @brief Set the POL7 field to a new value. */
#define BW_FTM_POL_POL7(x, v) (BITBAND_ACCESS32(HW_FTM_POL_ADDR(x), BP_FTM_POL_POL7) = (v))
/*@}*/

/*******************************************************************************
 * HW_FTM_FMS - Fault Mode Status
 ******************************************************************************/

/*!
 * @brief HW_FTM_FMS - Fault Mode Status (RW)
 *
 * Reset value: 0x00000000U
 *
 * This register contains the fault detection flags, write protection enable
 * bit, and the logic OR of the enabled fault inputs.
 */
typedef union _hw_ftm_fms
{
    uint32_t U;
    struct _hw_ftm_fms_bitfields
    {
        uint32_t FAULTF0 : 1;          /*!< [0] Fault Detection Flag 0 */
        uint32_t FAULTF1 : 1;          /*!< [1] Fault Detection Flag 1 */
        uint32_t FAULTF2 : 1;          /*!< [2] Fault Detection Flag 2 */
        uint32_t FAULTF3 : 1;          /*!< [3] Fault Detection Flag 3 */
        uint32_t RESERVED0 : 1;        /*!< [4]  */
        uint32_t FAULTIN : 1;          /*!< [5] Fault Inputs */
        uint32_t WPEN : 1;             /*!< [6] Write Protection Enable */
        uint32_t FAULTF : 1;           /*!< [7] Fault Detection Flag */
        uint32_t RESERVED1 : 24;       /*!< [31:8]  */
    } B;
} hw_ftm_fms_t;

/*!
 * @name Constants and macros for entire FTM_FMS register
 */
/*@{*/
#define HW_FTM_FMS_ADDR(x)       ((x) + 0x74U)

#define HW_FTM_FMS(x)            (*(__IO hw_ftm_fms_t *) HW_FTM_FMS_ADDR(x))
#define HW_FTM_FMS_RD(x)         (HW_FTM_FMS(x).U)
#define HW_FTM_FMS_WR(x, v)      (HW_FTM_FMS(x).U = (v))
#define HW_FTM_FMS_SET(x, v)     (HW_FTM_FMS_WR(x, HW_FTM_FMS_RD(x) |  (v)))
#define HW_FTM_FMS_CLR(x, v)     (HW_FTM_FMS_WR(x, HW_FTM_FMS_RD(x) & ~(v)))
#define HW_FTM_FMS_TOG(x, v)     (HW_FTM_FMS_WR(x, HW_FTM_FMS_RD(x) ^  (v)))
/*@}*/

/*
 * Constants & macros for individual FTM_FMS bitfields
 */

/*!
 * @name Register FTM_FMS, field FAULTF0[0] (ROWZ)
 *
 * Set by hardware when fault control is enabled, the corresponding fault input
 * is enabled and a fault condition is detected at the fault input. Clear FAULTF0
 * by reading the FMS register while FAULTF0 is set and then writing a 0 to
 * FAULTF0 while there is no existing fault condition at the corresponding fault
 * input. Writing a 1 to FAULTF0 has no effect. FAULTF0 bit is also cleared when
 * FAULTF bit is cleared. If another fault condition is detected at the corresponding
 * fault input before the clearing sequence is completed, the sequence is reset
 * so FAULTF0 remains set after the clearing sequence is completed for the
 * earlier fault condition.
 *
 * Values:
 * - 0 - No fault condition was detected at the fault input.
 * - 1 - A fault condition was detected at the fault input.
 */
/*@{*/
#define BP_FTM_FMS_FAULTF0   (0U)          /*!< Bit position for FTM_FMS_FAULTF0. */
#define BM_FTM_FMS_FAULTF0   (0x00000001U) /*!< Bit mask for FTM_FMS_FAULTF0. */
#define BS_FTM_FMS_FAULTF0   (1U)          /*!< Bit field size in bits for FTM_FMS_FAULTF0. */

/*! @brief Read current value of the FTM_FMS_FAULTF0 field. */
#define BR_FTM_FMS_FAULTF0(x) (BITBAND_ACCESS32(HW_FTM_FMS_ADDR(x), BP_FTM_FMS_FAULTF0))

/*! @brief Format value for bitfield FTM_FMS_FAULTF0. */
#define BF_FTM_FMS_FAULTF0(v) ((uint32_t)((uint32_t)(v) << BP_FTM_FMS_FAULTF0) & BM_FTM_FMS_FAULTF0)

/*! @brief Set the FAULTF0 field to a new value. */
#define BW_FTM_FMS_FAULTF0(x, v) (BITBAND_ACCESS32(HW_FTM_FMS_ADDR(x), BP_FTM_FMS_FAULTF0) = (v))
/*@}*/

/*!
 * @name Register FTM_FMS, field FAULTF1[1] (ROWZ)
 *
 * Set by hardware when fault control is enabled, the corresponding fault input
 * is enabled and a fault condition is detected at the fault input. Clear FAULTF1
 * by reading the FMS register while FAULTF1 is set and then writing a 0 to
 * FAULTF1 while there is no existing fault condition at the corresponding fault
 * input. Writing a 1 to FAULTF1 has no effect. FAULTF1 bit is also cleared when
 * FAULTF bit is cleared. If another fault condition is detected at the corresponding
 * fault input before the clearing sequence is completed, the sequence is reset
 * so FAULTF1 remains set after the clearing sequence is completed for the
 * earlier fault condition.
 *
 * Values:
 * - 0 - No fault condition was detected at the fault input.
 * - 1 - A fault condition was detected at the fault input.
 */
/*@{*/
#define BP_FTM_FMS_FAULTF1   (1U)          /*!< Bit position for FTM_FMS_FAULTF1. */
#define BM_FTM_FMS_FAULTF1   (0x00000002U) /*!< Bit mask for FTM_FMS_FAULTF1. */
#define BS_FTM_FMS_FAULTF1   (1U)          /*!< Bit field size in bits for FTM_FMS_FAULTF1. */

/*! @brief Read current value of the FTM_FMS_FAULTF1 field. */
#define BR_FTM_FMS_FAULTF1(x) (BITBAND_ACCESS32(HW_FTM_FMS_ADDR(x), BP_FTM_FMS_FAULTF1))

/*! @brief Format value for bitfield FTM_FMS_FAULTF1. */
#define BF_FTM_FMS_FAULTF1(v) ((uint32_t)((uint32_t)(v) << BP_FTM_FMS_FAULTF1) & BM_FTM_FMS_FAULTF1)

/*! @brief Set the FAULTF1 field to a new value. */
#define BW_FTM_FMS_FAULTF1(x, v) (BITBAND_ACCESS32(HW_FTM_FMS_ADDR(x), BP_FTM_FMS_FAULTF1) = (v))
/*@}*/

/*!
 * @name Register FTM_FMS, field FAULTF2[2] (ROWZ)
 *
 * Set by hardware when fault control is enabled, the corresponding fault input
 * is enabled and a fault condition is detected at the fault input. Clear FAULTF2
 * by reading the FMS register while FAULTF2 is set and then writing a 0 to
 * FAULTF2 while there is no existing fault condition at the corresponding fault
 * input. Writing a 1 to FAULTF2 has no effect. FAULTF2 bit is also cleared when
 * FAULTF bit is cleared. If another fault condition is detected at the corresponding
 * fault input before the clearing sequence is completed, the sequence is reset
 * so FAULTF2 remains set after the clearing sequence is completed for the
 * earlier fault condition.
 *
 * Values:
 * - 0 - No fault condition was detected at the fault input.
 * - 1 - A fault condition was detected at the fault input.
 */
/*@{*/
#define BP_FTM_FMS_FAULTF2   (2U)          /*!< Bit position for FTM_FMS_FAULTF2. */
#define BM_FTM_FMS_FAULTF2   (0x00000004U) /*!< Bit mask for FTM_FMS_FAULTF2. */
#define BS_FTM_FMS_FAULTF2   (1U)          /*!< Bit field size in bits for FTM_FMS_FAULTF2. */

/*! @brief Read current value of the FTM_FMS_FAULTF2 field. */
#define BR_FTM_FMS_FAULTF2(x) (BITBAND_ACCESS32(HW_FTM_FMS_ADDR(x), BP_FTM_FMS_FAULTF2))

/*! @brief Format value for bitfield FTM_FMS_FAULTF2. */
#define BF_FTM_FMS_FAULTF2(v) ((uint32_t)((uint32_t)(v) << BP_FTM_FMS_FAULTF2) & BM_FTM_FMS_FAULTF2)

/*! @brief Set the FAULTF2 field to a new value. */
#define BW_FTM_FMS_FAULTF2(x, v) (BITBAND_ACCESS32(HW_FTM_FMS_ADDR(x), BP_FTM_FMS_FAULTF2) = (v))
/*@}*/

/*!
 * @name Register FTM_FMS, field FAULTF3[3] (ROWZ)
 *
 * Set by hardware when fault control is enabled, the corresponding fault input
 * is enabled and a fault condition is detected at the fault input. Clear FAULTF3
 * by reading the FMS register while FAULTF3 is set and then writing a 0 to
 * FAULTF3 while there is no existing fault condition at the corresponding fault
 * input. Writing a 1 to FAULTF3 has no effect. FAULTF3 bit is also cleared when
 * FAULTF bit is cleared. If another fault condition is detected at the corresponding
 * fault input before the clearing sequence is completed, the sequence is reset
 * so FAULTF3 remains set after the clearing sequence is completed for the
 * earlier fault condition.
 *
 * Values:
 * - 0 - No fault condition was detected at the fault input.
 * - 1 - A fault condition was detected at the fault input.
 */
/*@{*/
#define BP_FTM_FMS_FAULTF3   (3U)          /*!< Bit position for FTM_FMS_FAULTF3. */
#define BM_FTM_FMS_FAULTF3   (0x00000008U) /*!< Bit mask for FTM_FMS_FAULTF3. */
#define BS_FTM_FMS_FAULTF3   (1U)          /*!< Bit field size in bits for FTM_FMS_FAULTF3. */

/*! @brief Read current value of the FTM_FMS_FAULTF3 field. */
#define BR_FTM_FMS_FAULTF3(x) (BITBAND_ACCESS32(HW_FTM_FMS_ADDR(x), BP_FTM_FMS_FAULTF3))

/*! @brief Format value for bitfield FTM_FMS_FAULTF3. */
#define BF_FTM_FMS_FAULTF3(v) ((uint32_t)((uint32_t)(v) << BP_FTM_FMS_FAULTF3) & BM_FTM_FMS_FAULTF3)

/*! @brief Set the FAULTF3 field to a new value. */
#define BW_FTM_FMS_FAULTF3(x, v) (BITBAND_ACCESS32(HW_FTM_FMS_ADDR(x), BP_FTM_FMS_FAULTF3) = (v))
/*@}*/

/*!
 * @name Register FTM_FMS, field FAULTIN[5] (RO)
 *
 * Represents the logic OR of the enabled fault inputs after their filter (if
 * their filter is enabled) when fault control is enabled.
 *
 * Values:
 * - 0 - The logic OR of the enabled fault inputs is 0.
 * - 1 - The logic OR of the enabled fault inputs is 1.
 */
/*@{*/
#define BP_FTM_FMS_FAULTIN   (5U)          /*!< Bit position for FTM_FMS_FAULTIN. */
#define BM_FTM_FMS_FAULTIN   (0x00000020U) /*!< Bit mask for FTM_FMS_FAULTIN. */
#define BS_FTM_FMS_FAULTIN   (1U)          /*!< Bit field size in bits for FTM_FMS_FAULTIN. */

/*! @brief Read current value of the FTM_FMS_FAULTIN field. */
#define BR_FTM_FMS_FAULTIN(x) (BITBAND_ACCESS32(HW_FTM_FMS_ADDR(x), BP_FTM_FMS_FAULTIN))
/*@}*/

/*!
 * @name Register FTM_FMS, field WPEN[6] (RW)
 *
 * The WPEN bit is the negation of the WPDIS bit. WPEN is set when 1 is written
 * to it. WPEN is cleared when WPEN bit is read as a 1 and then 1 is written to
 * WPDIS. Writing 0 to WPEN has no effect.
 *
 * Values:
 * - 0 - Write protection is disabled. Write protected bits can be written.
 * - 1 - Write protection is enabled. Write protected bits cannot be written.
 */
/*@{*/
#define BP_FTM_FMS_WPEN      (6U)          /*!< Bit position for FTM_FMS_WPEN. */
#define BM_FTM_FMS_WPEN      (0x00000040U) /*!< Bit mask for FTM_FMS_WPEN. */
#define BS_FTM_FMS_WPEN      (1U)          /*!< Bit field size in bits for FTM_FMS_WPEN. */

/*! @brief Read current value of the FTM_FMS_WPEN field. */
#define BR_FTM_FMS_WPEN(x)   (BITBAND_ACCESS32(HW_FTM_FMS_ADDR(x), BP_FTM_FMS_WPEN))

/*! @brief Format value for bitfield FTM_FMS_WPEN. */
#define BF_FTM_FMS_WPEN(v)   ((uint32_t)((uint32_t)(v) << BP_FTM_FMS_WPEN) & BM_FTM_FMS_WPEN)

/*! @brief Set the WPEN field to a new value. */
#define BW_FTM_FMS_WPEN(x, v) (BITBAND_ACCESS32(HW_FTM_FMS_ADDR(x), BP_FTM_FMS_WPEN) = (v))
/*@}*/

/*!
 * @name Register FTM_FMS, field FAULTF[7] (ROWZ)
 *
 * Represents the logic OR of the individual FAULTFj bits where j = 3, 2, 1, 0.
 * Clear FAULTF by reading the FMS register while FAULTF is set and then writing
 * a 0 to FAULTF while there is no existing fault condition at the enabled fault
 * inputs. Writing a 1 to FAULTF has no effect. If another fault condition is
 * detected in an enabled fault input before the clearing sequence is completed, the
 * sequence is reset so FAULTF remains set after the clearing sequence is
 * completed for the earlier fault condition. FAULTF is also cleared when FAULTFj bits
 * are cleared individually.
 *
 * Values:
 * - 0 - No fault condition was detected.
 * - 1 - A fault condition was detected.
 */
/*@{*/
#define BP_FTM_FMS_FAULTF    (7U)          /*!< Bit position for FTM_FMS_FAULTF. */
#define BM_FTM_FMS_FAULTF    (0x00000080U) /*!< Bit mask for FTM_FMS_FAULTF. */
#define BS_FTM_FMS_FAULTF    (1U)          /*!< Bit field size in bits for FTM_FMS_FAULTF. */

/*! @brief Read current value of the FTM_FMS_FAULTF field. */
#define BR_FTM_FMS_FAULTF(x) (BITBAND_ACCESS32(HW_FTM_FMS_ADDR(x), BP_FTM_FMS_FAULTF))

/*! @brief Format value for bitfield FTM_FMS_FAULTF. */
#define BF_FTM_FMS_FAULTF(v) ((uint32_t)((uint32_t)(v) << BP_FTM_FMS_FAULTF) & BM_FTM_FMS_FAULTF)

/*! @brief Set the FAULTF field to a new value. */
#define BW_FTM_FMS_FAULTF(x, v) (BITBAND_ACCESS32(HW_FTM_FMS_ADDR(x), BP_FTM_FMS_FAULTF) = (v))
/*@}*/

/*******************************************************************************
 * HW_FTM_FILTER - Input Capture Filter Control
 ******************************************************************************/

/*!
 * @brief HW_FTM_FILTER - Input Capture Filter Control (RW)
 *
 * Reset value: 0x00000000U
 *
 * This register selects the filter value for the inputs of channels. Channels
 * 4, 5, 6 and 7 do not have an input filter. Writing to the FILTER register has
 * immediate effect and must be done only when the channels 0, 1, 2, and 3 are not
 * in input modes. Failure to do this could result in a missing valid signal.
 */
typedef union _hw_ftm_filter
{
    uint32_t U;
    struct _hw_ftm_filter_bitfields
    {
        uint32_t CH0FVAL : 4;          /*!< [3:0] Channel 0 Input Filter */
        uint32_t CH1FVAL : 4;          /*!< [7:4] Channel 1 Input Filter */
        uint32_t CH2FVAL : 4;          /*!< [11:8] Channel 2 Input Filter */
        uint32_t CH3FVAL : 4;          /*!< [15:12] Channel 3 Input Filter */
        uint32_t RESERVED0 : 16;       /*!< [31:16]  */
    } B;
} hw_ftm_filter_t;

/*!
 * @name Constants and macros for entire FTM_FILTER register
 */
/*@{*/
#define HW_FTM_FILTER_ADDR(x)    ((x) + 0x78U)

#define HW_FTM_FILTER(x)         (*(__IO hw_ftm_filter_t *) HW_FTM_FILTER_ADDR(x))
#define HW_FTM_FILTER_RD(x)      (HW_FTM_FILTER(x).U)
#define HW_FTM_FILTER_WR(x, v)   (HW_FTM_FILTER(x).U = (v))
#define HW_FTM_FILTER_SET(x, v)  (HW_FTM_FILTER_WR(x, HW_FTM_FILTER_RD(x) |  (v)))
#define HW_FTM_FILTER_CLR(x, v)  (HW_FTM_FILTER_WR(x, HW_FTM_FILTER_RD(x) & ~(v)))
#define HW_FTM_FILTER_TOG(x, v)  (HW_FTM_FILTER_WR(x, HW_FTM_FILTER_RD(x) ^  (v)))
/*@}*/

/*
 * Constants & macros for individual FTM_FILTER bitfields
 */

/*!
 * @name Register FTM_FILTER, field CH0FVAL[3:0] (RW)
 *
 * Selects the filter value for the channel input. The filter is disabled when
 * the value is zero.
 */
/*@{*/
#define BP_FTM_FILTER_CH0FVAL (0U)         /*!< Bit position for FTM_FILTER_CH0FVAL. */
#define BM_FTM_FILTER_CH0FVAL (0x0000000FU) /*!< Bit mask for FTM_FILTER_CH0FVAL. */
#define BS_FTM_FILTER_CH0FVAL (4U)         /*!< Bit field size in bits for FTM_FILTER_CH0FVAL. */

/*! @brief Read current value of the FTM_FILTER_CH0FVAL field. */
#define BR_FTM_FILTER_CH0FVAL(x) (HW_FTM_FILTER(x).B.CH0FVAL)

/*! @brief Format value for bitfield FTM_FILTER_CH0FVAL. */
#define BF_FTM_FILTER_CH0FVAL(v) ((uint32_t)((uint32_t)(v) << BP_FTM_FILTER_CH0FVAL) & BM_FTM_FILTER_CH0FVAL)

/*! @brief Set the CH0FVAL field to a new value. */
#define BW_FTM_FILTER_CH0FVAL(x, v) (HW_FTM_FILTER_WR(x, (HW_FTM_FILTER_RD(x) & ~BM_FTM_FILTER_CH0FVAL) | BF_FTM_FILTER_CH0FVAL(v)))
/*@}*/

/*!
 * @name Register FTM_FILTER, field CH1FVAL[7:4] (RW)
 *
 * Selects the filter value for the channel input. The filter is disabled when
 * the value is zero.
 */
/*@{*/
#define BP_FTM_FILTER_CH1FVAL (4U)         /*!< Bit position for FTM_FILTER_CH1FVAL. */
#define BM_FTM_FILTER_CH1FVAL (0x000000F0U) /*!< Bit mask for FTM_FILTER_CH1FVAL. */
#define BS_FTM_FILTER_CH1FVAL (4U)         /*!< Bit field size in bits for FTM_FILTER_CH1FVAL. */

/*! @brief Read current value of the FTM_FILTER_CH1FVAL field. */
#define BR_FTM_FILTER_CH1FVAL(x) (HW_FTM_FILTER(x).B.CH1FVAL)

/*! @brief Format value for bitfield FTM_FILTER_CH1FVAL. */
#define BF_FTM_FILTER_CH1FVAL(v) ((uint32_t)((uint32_t)(v) << BP_FTM_FILTER_CH1FVAL) & BM_FTM_FILTER_CH1FVAL)

/*! @brief Set the CH1FVAL field to a new value. */
#define BW_FTM_FILTER_CH1FVAL(x, v) (HW_FTM_FILTER_WR(x, (HW_FTM_FILTER_RD(x) & ~BM_FTM_FILTER_CH1FVAL) | BF_FTM_FILTER_CH1FVAL(v)))
/*@}*/

/*!
 * @name Register FTM_FILTER, field CH2FVAL[11:8] (RW)
 *
 * Selects the filter value for the channel input. The filter is disabled when
 * the value is zero.
 */
/*@{*/
#define BP_FTM_FILTER_CH2FVAL (8U)         /*!< Bit position for FTM_FILTER_CH2FVAL. */
#define BM_FTM_FILTER_CH2FVAL (0x00000F00U) /*!< Bit mask for FTM_FILTER_CH2FVAL. */
#define BS_FTM_FILTER_CH2FVAL (4U)         /*!< Bit field size in bits for FTM_FILTER_CH2FVAL. */

/*! @brief Read current value of the FTM_FILTER_CH2FVAL field. */
#define BR_FTM_FILTER_CH2FVAL(x) (HW_FTM_FILTER(x).B.CH2FVAL)

/*! @brief Format value for bitfield FTM_FILTER_CH2FVAL. */
#define BF_FTM_FILTER_CH2FVAL(v) ((uint32_t)((uint32_t)(v) << BP_FTM_FILTER_CH2FVAL) & BM_FTM_FILTER_CH2FVAL)

/*! @brief Set the CH2FVAL field to a new value. */
#define BW_FTM_FILTER_CH2FVAL(x, v) (HW_FTM_FILTER_WR(x, (HW_FTM_FILTER_RD(x) & ~BM_FTM_FILTER_CH2FVAL) | BF_FTM_FILTER_CH2FVAL(v)))
/*@}*/

/*!
 * @name Register FTM_FILTER, field CH3FVAL[15:12] (RW)
 *
 * Selects the filter value for the channel input. The filter is disabled when
 * the value is zero.
 */
/*@{*/
#define BP_FTM_FILTER_CH3FVAL (12U)        /*!< Bit position for FTM_FILTER_CH3FVAL. */
#define BM_FTM_FILTER_CH3FVAL (0x0000F000U) /*!< Bit mask for FTM_FILTER_CH3FVAL. */
#define BS_FTM_FILTER_CH3FVAL (4U)         /*!< Bit field size in bits for FTM_FILTER_CH3FVAL. */

/*! @brief Read current value of the FTM_FILTER_CH3FVAL field. */
#define BR_FTM_FILTER_CH3FVAL(x) (HW_FTM_FILTER(x).B.CH3FVAL)

/*! @brief Format value for bitfield FTM_FILTER_CH3FVAL. */
#define BF_FTM_FILTER_CH3FVAL(v) ((uint32_t)((uint32_t)(v) << BP_FTM_FILTER_CH3FVAL) & BM_FTM_FILTER_CH3FVAL)

/*! @brief Set the CH3FVAL field to a new value. */
#define BW_FTM_FILTER_CH3FVAL(x, v) (HW_FTM_FILTER_WR(x, (HW_FTM_FILTER_RD(x) & ~BM_FTM_FILTER_CH3FVAL) | BF_FTM_FILTER_CH3FVAL(v)))
/*@}*/

/*******************************************************************************
 * HW_FTM_FLTCTRL - Fault Control
 ******************************************************************************/

/*!
 * @brief HW_FTM_FLTCTRL - Fault Control (RW)
 *
 * Reset value: 0x00000000U
 *
 * This register selects the filter value for the fault inputs, enables the
 * fault inputs and the fault inputs filter.
 */
typedef union _hw_ftm_fltctrl
{
    uint32_t U;
    struct _hw_ftm_fltctrl_bitfields
    {
        uint32_t FAULT0EN : 1;         /*!< [0] Fault Input 0 Enable */
        uint32_t FAULT1EN : 1;         /*!< [1] Fault Input 1 Enable */
        uint32_t FAULT2EN : 1;         /*!< [2] Fault Input 2 Enable */
        uint32_t FAULT3EN : 1;         /*!< [3] Fault Input 3 Enable */
        uint32_t FFLTR0EN : 1;         /*!< [4] Fault Input 0 Filter Enable */
        uint32_t FFLTR1EN : 1;         /*!< [5] Fault Input 1 Filter Enable */
        uint32_t FFLTR2EN : 1;         /*!< [6] Fault Input 2 Filter Enable */
        uint32_t FFLTR3EN : 1;         /*!< [7] Fault Input 3 Filter Enable */
        uint32_t FFVAL : 4;            /*!< [11:8] Fault Input Filter */
        uint32_t RESERVED0 : 20;       /*!< [31:12]  */
    } B;
} hw_ftm_fltctrl_t;

/*!
 * @name Constants and macros for entire FTM_FLTCTRL register
 */
/*@{*/
#define HW_FTM_FLTCTRL_ADDR(x)   ((x) + 0x7CU)

#define HW_FTM_FLTCTRL(x)        (*(__IO hw_ftm_fltctrl_t *) HW_FTM_FLTCTRL_ADDR(x))
#define HW_FTM_FLTCTRL_RD(x)     (HW_FTM_FLTCTRL(x).U)
#define HW_FTM_FLTCTRL_WR(x, v)  (HW_FTM_FLTCTRL(x).U = (v))
#define HW_FTM_FLTCTRL_SET(x, v) (HW_FTM_FLTCTRL_WR(x, HW_FTM_FLTCTRL_RD(x) |  (v)))
#define HW_FTM_FLTCTRL_CLR(x, v) (HW_FTM_FLTCTRL_WR(x, HW_FTM_FLTCTRL_RD(x) & ~(v)))
#define HW_FTM_FLTCTRL_TOG(x, v) (HW_FTM_FLTCTRL_WR(x, HW_FTM_FLTCTRL_RD(x) ^  (v)))
/*@}*/

/*
 * Constants & macros for individual FTM_FLTCTRL bitfields
 */

/*!
 * @name Register FTM_FLTCTRL, field FAULT0EN[0] (RW)
 *
 * Enables the fault input. This field is write protected. It can be written
 * only when MODE[WPDIS] = 1.
 *
 * Values:
 * - 0 - Fault input is disabled.
 * - 1 - Fault input is enabled.
 */
/*@{*/
#define BP_FTM_FLTCTRL_FAULT0EN (0U)       /*!< Bit position for FTM_FLTCTRL_FAULT0EN. */
#define BM_FTM_FLTCTRL_FAULT0EN (0x00000001U) /*!< Bit mask for FTM_FLTCTRL_FAULT0EN. */
#define BS_FTM_FLTCTRL_FAULT0EN (1U)       /*!< Bit field size in bits for FTM_FLTCTRL_FAULT0EN. */

/*! @brief Read current value of the FTM_FLTCTRL_FAULT0EN field. */
#define BR_FTM_FLTCTRL_FAULT0EN(x) (BITBAND_ACCESS32(HW_FTM_FLTCTRL_ADDR(x), BP_FTM_FLTCTRL_FAULT0EN))

/*! @brief Format value for bitfield FTM_FLTCTRL_FAULT0EN. */
#define BF_FTM_FLTCTRL_FAULT0EN(v) ((uint32_t)((uint32_t)(v) << BP_FTM_FLTCTRL_FAULT0EN) & BM_FTM_FLTCTRL_FAULT0EN)

/*! @brief Set the FAULT0EN field to a new value. */
#define BW_FTM_FLTCTRL_FAULT0EN(x, v) (BITBAND_ACCESS32(HW_FTM_FLTCTRL_ADDR(x), BP_FTM_FLTCTRL_FAULT0EN) = (v))
/*@}*/

/*!
 * @name Register FTM_FLTCTRL, field FAULT1EN[1] (RW)
 *
 * Enables the fault input. This field is write protected. It can be written
 * only when MODE[WPDIS] = 1.
 *
 * Values:
 * - 0 - Fault input is disabled.
 * - 1 - Fault input is enabled.
 */
/*@{*/
#define BP_FTM_FLTCTRL_FAULT1EN (1U)       /*!< Bit position for FTM_FLTCTRL_FAULT1EN. */
#define BM_FTM_FLTCTRL_FAULT1EN (0x00000002U) /*!< Bit mask for FTM_FLTCTRL_FAULT1EN. */
#define BS_FTM_FLTCTRL_FAULT1EN (1U)       /*!< Bit field size in bits for FTM_FLTCTRL_FAULT1EN. */

/*! @brief Read current value of the FTM_FLTCTRL_FAULT1EN field. */
#define BR_FTM_FLTCTRL_FAULT1EN(x) (BITBAND_ACCESS32(HW_FTM_FLTCTRL_ADDR(x), BP_FTM_FLTCTRL_FAULT1EN))

/*! @brief Format value for bitfield FTM_FLTCTRL_FAULT1EN. */
#define BF_FTM_FLTCTRL_FAULT1EN(v) ((uint32_t)((uint32_t)(v) << BP_FTM_FLTCTRL_FAULT1EN) & BM_FTM_FLTCTRL_FAULT1EN)

/*! @brief Set the FAULT1EN field to a new value. */
#define BW_FTM_FLTCTRL_FAULT1EN(x, v) (BITBAND_ACCESS32(HW_FTM_FLTCTRL_ADDR(x), BP_FTM_FLTCTRL_FAULT1EN) = (v))
/*@}*/

/*!
 * @name Register FTM_FLTCTRL, field FAULT2EN[2] (RW)
 *
 * Enables the fault input. This field is write protected. It can be written
 * only when MODE[WPDIS] = 1.
 *
 * Values:
 * - 0 - Fault input is disabled.
 * - 1 - Fault input is enabled.
 */
/*@{*/
#define BP_FTM_FLTCTRL_FAULT2EN (2U)       /*!< Bit position for FTM_FLTCTRL_FAULT2EN. */
#define BM_FTM_FLTCTRL_FAULT2EN (0x00000004U) /*!< Bit mask for FTM_FLTCTRL_FAULT2EN. */
#define BS_FTM_FLTCTRL_FAULT2EN (1U)       /*!< Bit field size in bits for FTM_FLTCTRL_FAULT2EN. */

/*! @brief Read current value of the FTM_FLTCTRL_FAULT2EN field. */
#define BR_FTM_FLTCTRL_FAULT2EN(x) (BITBAND_ACCESS32(HW_FTM_FLTCTRL_ADDR(x), BP_FTM_FLTCTRL_FAULT2EN))

/*! @brief Format value for bitfield FTM_FLTCTRL_FAULT2EN. */
#define BF_FTM_FLTCTRL_FAULT2EN(v) ((uint32_t)((uint32_t)(v) << BP_FTM_FLTCTRL_FAULT2EN) & BM_FTM_FLTCTRL_FAULT2EN)

/*! @brief Set the FAULT2EN field to a new value. */
#define BW_FTM_FLTCTRL_FAULT2EN(x, v) (BITBAND_ACCESS32(HW_FTM_FLTCTRL_ADDR(x), BP_FTM_FLTCTRL_FAULT2EN) = (v))
/*@}*/

/*!
 * @name Register FTM_FLTCTRL, field FAULT3EN[3] (RW)
 *
 * Enables the fault input. This field is write protected. It can be written
 * only when MODE[WPDIS] = 1.
 *
 * Values:
 * - 0 - Fault input is disabled.
 * - 1 - Fault input is enabled.
 */
/*@{*/
#define BP_FTM_FLTCTRL_FAULT3EN (3U)       /*!< Bit position for FTM_FLTCTRL_FAULT3EN. */
#define BM_FTM_FLTCTRL_FAULT3EN (0x00000008U) /*!< Bit mask for FTM_FLTCTRL_FAULT3EN. */
#define BS_FTM_FLTCTRL_FAULT3EN (1U)       /*!< Bit field size in bits for FTM_FLTCTRL_FAULT3EN. */

/*! @brief Read current value of the FTM_FLTCTRL_FAULT3EN field. */
#define BR_FTM_FLTCTRL_FAULT3EN(x) (BITBAND_ACCESS32(HW_FTM_FLTCTRL_ADDR(x), BP_FTM_FLTCTRL_FAULT3EN))

/*! @brief Format value for bitfield FTM_FLTCTRL_FAULT3EN. */
#define BF_FTM_FLTCTRL_FAULT3EN(v) ((uint32_t)((uint32_t)(v) << BP_FTM_FLTCTRL_FAULT3EN) & BM_FTM_FLTCTRL_FAULT3EN)

/*! @brief Set the FAULT3EN field to a new value. */
#define BW_FTM_FLTCTRL_FAULT3EN(x, v) (BITBAND_ACCESS32(HW_FTM_FLTCTRL_ADDR(x), BP_FTM_FLTCTRL_FAULT3EN) = (v))
/*@}*/

/*!
 * @name Register FTM_FLTCTRL, field FFLTR0EN[4] (RW)
 *
 * Enables the filter for the fault input. This field is write protected. It can
 * be written only when MODE[WPDIS] = 1.
 *
 * Values:
 * - 0 - Fault input filter is disabled.
 * - 1 - Fault input filter is enabled.
 */
/*@{*/
#define BP_FTM_FLTCTRL_FFLTR0EN (4U)       /*!< Bit position for FTM_FLTCTRL_FFLTR0EN. */
#define BM_FTM_FLTCTRL_FFLTR0EN (0x00000010U) /*!< Bit mask for FTM_FLTCTRL_FFLTR0EN. */
#define BS_FTM_FLTCTRL_FFLTR0EN (1U)       /*!< Bit field size in bits for FTM_FLTCTRL_FFLTR0EN. */

/*! @brief Read current value of the FTM_FLTCTRL_FFLTR0EN field. */
#define BR_FTM_FLTCTRL_FFLTR0EN(x) (BITBAND_ACCESS32(HW_FTM_FLTCTRL_ADDR(x), BP_FTM_FLTCTRL_FFLTR0EN))

/*! @brief Format value for bitfield FTM_FLTCTRL_FFLTR0EN. */
#define BF_FTM_FLTCTRL_FFLTR0EN(v) ((uint32_t)((uint32_t)(v) << BP_FTM_FLTCTRL_FFLTR0EN) & BM_FTM_FLTCTRL_FFLTR0EN)

/*! @brief Set the FFLTR0EN field to a new value. */
#define BW_FTM_FLTCTRL_FFLTR0EN(x, v) (BITBAND_ACCESS32(HW_FTM_FLTCTRL_ADDR(x), BP_FTM_FLTCTRL_FFLTR0EN) = (v))
/*@}*/

/*!
 * @name Register FTM_FLTCTRL, field FFLTR1EN[5] (RW)
 *
 * Enables the filter for the fault input. This field is write protected. It can
 * be written only when MODE[WPDIS] = 1.
 *
 * Values:
 * - 0 - Fault input filter is disabled.
 * - 1 - Fault input filter is enabled.
 */
/*@{*/
#define BP_FTM_FLTCTRL_FFLTR1EN (5U)       /*!< Bit position for FTM_FLTCTRL_FFLTR1EN. */
#define BM_FTM_FLTCTRL_FFLTR1EN (0x00000020U) /*!< Bit mask for FTM_FLTCTRL_FFLTR1EN. */
#define BS_FTM_FLTCTRL_FFLTR1EN (1U)       /*!< Bit field size in bits for FTM_FLTCTRL_FFLTR1EN. */

/*! @brief Read current value of the FTM_FLTCTRL_FFLTR1EN field. */
#define BR_FTM_FLTCTRL_FFLTR1EN(x) (BITBAND_ACCESS32(HW_FTM_FLTCTRL_ADDR(x), BP_FTM_FLTCTRL_FFLTR1EN))

/*! @brief Format value for bitfield FTM_FLTCTRL_FFLTR1EN. */
#define BF_FTM_FLTCTRL_FFLTR1EN(v) ((uint32_t)((uint32_t)(v) << BP_FTM_FLTCTRL_FFLTR1EN) & BM_FTM_FLTCTRL_FFLTR1EN)

/*! @brief Set the FFLTR1EN field to a new value. */
#define BW_FTM_FLTCTRL_FFLTR1EN(x, v) (BITBAND_ACCESS32(HW_FTM_FLTCTRL_ADDR(x), BP_FTM_FLTCTRL_FFLTR1EN) = (v))
/*@}*/

/*!
 * @name Register FTM_FLTCTRL, field FFLTR2EN[6] (RW)
 *
 * Enables the filter for the fault input. This field is write protected. It can
 * be written only when MODE[WPDIS] = 1.
 *
 * Values:
 * - 0 - Fault input filter is disabled.
 * - 1 - Fault input filter is enabled.
 */
/*@{*/
#define BP_FTM_FLTCTRL_FFLTR2EN (6U)       /*!< Bit position for FTM_FLTCTRL_FFLTR2EN. */
#define BM_FTM_FLTCTRL_FFLTR2EN (0x00000040U) /*!< Bit mask for FTM_FLTCTRL_FFLTR2EN. */
#define BS_FTM_FLTCTRL_FFLTR2EN (1U)       /*!< Bit field size in bits for FTM_FLTCTRL_FFLTR2EN. */

/*! @brief Read current value of the FTM_FLTCTRL_FFLTR2EN field. */
#define BR_FTM_FLTCTRL_FFLTR2EN(x) (BITBAND_ACCESS32(HW_FTM_FLTCTRL_ADDR(x), BP_FTM_FLTCTRL_FFLTR2EN))

/*! @brief Format value for bitfield FTM_FLTCTRL_FFLTR2EN. */
#define BF_FTM_FLTCTRL_FFLTR2EN(v) ((uint32_t)((uint32_t)(v) << BP_FTM_FLTCTRL_FFLTR2EN) & BM_FTM_FLTCTRL_FFLTR2EN)

/*! @brief Set the FFLTR2EN field to a new value. */
#define BW_FTM_FLTCTRL_FFLTR2EN(x, v) (BITBAND_ACCESS32(HW_FTM_FLTCTRL_ADDR(x), BP_FTM_FLTCTRL_FFLTR2EN) = (v))
/*@}*/

/*!
 * @name Register FTM_FLTCTRL, field FFLTR3EN[7] (RW)
 *
 * Enables the filter for the fault input. This field is write protected. It can
 * be written only when MODE[WPDIS] = 1.
 *
 * Values:
 * - 0 - Fault input filter is disabled.
 * - 1 - Fault input filter is enabled.
 */
/*@{*/
#define BP_FTM_FLTCTRL_FFLTR3EN (7U)       /*!< Bit position for FTM_FLTCTRL_FFLTR3EN. */
#define BM_FTM_FLTCTRL_FFLTR3EN (0x00000080U) /*!< Bit mask for FTM_FLTCTRL_FFLTR3EN. */
#define BS_FTM_FLTCTRL_FFLTR3EN (1U)       /*!< Bit field size in bits for FTM_FLTCTRL_FFLTR3EN. */

/*! @brief Read current value of the FTM_FLTCTRL_FFLTR3EN field. */
#define BR_FTM_FLTCTRL_FFLTR3EN(x) (BITBAND_ACCESS32(HW_FTM_FLTCTRL_ADDR(x), BP_FTM_FLTCTRL_FFLTR3EN))

/*! @brief Format value for bitfield FTM_FLTCTRL_FFLTR3EN. */
#define BF_FTM_FLTCTRL_FFLTR3EN(v) ((uint32_t)((uint32_t)(v) << BP_FTM_FLTCTRL_FFLTR3EN) & BM_FTM_FLTCTRL_FFLTR3EN)

/*! @brief Set the FFLTR3EN field to a new value. */
#define BW_FTM_FLTCTRL_FFLTR3EN(x, v) (BITBAND_ACCESS32(HW_FTM_FLTCTRL_ADDR(x), BP_FTM_FLTCTRL_FFLTR3EN) = (v))
/*@}*/

/*!
 * @name Register FTM_FLTCTRL, field FFVAL[11:8] (RW)
 *
 * Selects the filter value for the fault inputs. The fault filter is disabled
 * when the value is zero. Writing to this field has immediate effect and must be
 * done only when the fault control or all fault inputs are disabled. Failure to
 * do this could result in a missing fault detection.
 */
/*@{*/
#define BP_FTM_FLTCTRL_FFVAL (8U)          /*!< Bit position for FTM_FLTCTRL_FFVAL. */
#define BM_FTM_FLTCTRL_FFVAL (0x00000F00U) /*!< Bit mask for FTM_FLTCTRL_FFVAL. */
#define BS_FTM_FLTCTRL_FFVAL (4U)          /*!< Bit field size in bits for FTM_FLTCTRL_FFVAL. */

/*! @brief Read current value of the FTM_FLTCTRL_FFVAL field. */
#define BR_FTM_FLTCTRL_FFVAL(x) (HW_FTM_FLTCTRL(x).B.FFVAL)

/*! @brief Format value for bitfield FTM_FLTCTRL_FFVAL. */
#define BF_FTM_FLTCTRL_FFVAL(v) ((uint32_t)((uint32_t)(v) << BP_FTM_FLTCTRL_FFVAL) & BM_FTM_FLTCTRL_FFVAL)

/*! @brief Set the FFVAL field to a new value. */
#define BW_FTM_FLTCTRL_FFVAL(x, v) (HW_FTM_FLTCTRL_WR(x, (HW_FTM_FLTCTRL_RD(x) & ~BM_FTM_FLTCTRL_FFVAL) | BF_FTM_FLTCTRL_FFVAL(v)))
/*@}*/

/*******************************************************************************
 * HW_FTM_QDCTRL - Quadrature Decoder Control And Status
 ******************************************************************************/

/*!
 * @brief HW_FTM_QDCTRL - Quadrature Decoder Control And Status (RW)
 *
 * Reset value: 0x00000000U
 *
 * This register has the control and status bits for the Quadrature Decoder mode.
 */
typedef union _hw_ftm_qdctrl
{
    uint32_t U;
    struct _hw_ftm_qdctrl_bitfields
    {
        uint32_t QUADEN : 1;           /*!< [0] Quadrature Decoder Mode Enable */
        uint32_t TOFDIR : 1;           /*!< [1] Timer Overflow Direction In Quadrature
                                        * Decoder Mode */
        uint32_t QUADIR : 1;           /*!< [2] FTM Counter Direction In Quadrature
                                        * Decoder Mode */
        uint32_t QUADMODE : 1;         /*!< [3] Quadrature Decoder Mode */
        uint32_t PHBPOL : 1;           /*!< [4] Phase B Input Polarity */
        uint32_t PHAPOL : 1;           /*!< [5] Phase A Input Polarity */
        uint32_t PHBFLTREN : 1;        /*!< [6] Phase B Input Filter Enable */
        uint32_t PHAFLTREN : 1;        /*!< [7] Phase A Input Filter Enable */
        uint32_t RESERVED0 : 24;       /*!< [31:8]  */
    } B;
} hw_ftm_qdctrl_t;

/*!
 * @name Constants and macros for entire FTM_QDCTRL register
 */
/*@{*/
#define HW_FTM_QDCTRL_ADDR(x)    ((x) + 0x80U)

#define HW_FTM_QDCTRL(x)         (*(__IO hw_ftm_qdctrl_t *) HW_FTM_QDCTRL_ADDR(x))
#define HW_FTM_QDCTRL_RD(x)      (HW_FTM_QDCTRL(x).U)
#define HW_FTM_QDCTRL_WR(x, v)   (HW_FTM_QDCTRL(x).U = (v))
#define HW_FTM_QDCTRL_SET(x, v)  (HW_FTM_QDCTRL_WR(x, HW_FTM_QDCTRL_RD(x) |  (v)))
#define HW_FTM_QDCTRL_CLR(x, v)  (HW_FTM_QDCTRL_WR(x, HW_FTM_QDCTRL_RD(x) & ~(v)))
#define HW_FTM_QDCTRL_TOG(x, v)  (HW_FTM_QDCTRL_WR(x, HW_FTM_QDCTRL_RD(x) ^  (v)))
/*@}*/

/*
 * Constants & macros for individual FTM_QDCTRL bitfields
 */

/*!
 * @name Register FTM_QDCTRL, field QUADEN[0] (RW)
 *
 * Enables the Quadrature Decoder mode. In this mode, the phase A and B input
 * signals control the FTM counter direction. The Quadrature Decoder mode has
 * precedence over the other modes. See #ModeSel1Table. This field is write protected.
 * It can be written only when MODE[WPDIS] = 1.
 *
 * Values:
 * - 0 - Quadrature Decoder mode is disabled.
 * - 1 - Quadrature Decoder mode is enabled.
 */
/*@{*/
#define BP_FTM_QDCTRL_QUADEN (0U)          /*!< Bit position for FTM_QDCTRL_QUADEN. */
#define BM_FTM_QDCTRL_QUADEN (0x00000001U) /*!< Bit mask for FTM_QDCTRL_QUADEN. */
#define BS_FTM_QDCTRL_QUADEN (1U)          /*!< Bit field size in bits for FTM_QDCTRL_QUADEN. */

/*! @brief Read current value of the FTM_QDCTRL_QUADEN field. */
#define BR_FTM_QDCTRL_QUADEN(x) (BITBAND_ACCESS32(HW_FTM_QDCTRL_ADDR(x), BP_FTM_QDCTRL_QUADEN))

/*! @brief Format value for bitfield FTM_QDCTRL_QUADEN. */
#define BF_FTM_QDCTRL_QUADEN(v) ((uint32_t)((uint32_t)(v) << BP_FTM_QDCTRL_QUADEN) & BM_FTM_QDCTRL_QUADEN)

/*! @brief Set the QUADEN field to a new value. */
#define BW_FTM_QDCTRL_QUADEN(x, v) (BITBAND_ACCESS32(HW_FTM_QDCTRL_ADDR(x), BP_FTM_QDCTRL_QUADEN) = (v))
/*@}*/

/*!
 * @name Register FTM_QDCTRL, field TOFDIR[1] (RO)
 *
 * Indicates if the TOF bit was set on the top or the bottom of counting.
 *
 * Values:
 * - 0 - TOF bit was set on the bottom of counting. There was an FTM counter
 *     decrement and FTM counter changes from its minimum value (CNTIN register) to
 *     its maximum value (MOD register).
 * - 1 - TOF bit was set on the top of counting. There was an FTM counter
 *     increment and FTM counter changes from its maximum value (MOD register) to its
 *     minimum value (CNTIN register).
 */
/*@{*/
#define BP_FTM_QDCTRL_TOFDIR (1U)          /*!< Bit position for FTM_QDCTRL_TOFDIR. */
#define BM_FTM_QDCTRL_TOFDIR (0x00000002U) /*!< Bit mask for FTM_QDCTRL_TOFDIR. */
#define BS_FTM_QDCTRL_TOFDIR (1U)          /*!< Bit field size in bits for FTM_QDCTRL_TOFDIR. */

/*! @brief Read current value of the FTM_QDCTRL_TOFDIR field. */
#define BR_FTM_QDCTRL_TOFDIR(x) (BITBAND_ACCESS32(HW_FTM_QDCTRL_ADDR(x), BP_FTM_QDCTRL_TOFDIR))
/*@}*/

/*!
 * @name Register FTM_QDCTRL, field QUADIR[2] (RO)
 *
 * Indicates the counting direction.
 *
 * Values:
 * - 0 - Counting direction is decreasing (FTM counter decrement).
 * - 1 - Counting direction is increasing (FTM counter increment).
 */
/*@{*/
#define BP_FTM_QDCTRL_QUADIR (2U)          /*!< Bit position for FTM_QDCTRL_QUADIR. */
#define BM_FTM_QDCTRL_QUADIR (0x00000004U) /*!< Bit mask for FTM_QDCTRL_QUADIR. */
#define BS_FTM_QDCTRL_QUADIR (1U)          /*!< Bit field size in bits for FTM_QDCTRL_QUADIR. */

/*! @brief Read current value of the FTM_QDCTRL_QUADIR field. */
#define BR_FTM_QDCTRL_QUADIR(x) (BITBAND_ACCESS32(HW_FTM_QDCTRL_ADDR(x), BP_FTM_QDCTRL_QUADIR))
/*@}*/

/*!
 * @name Register FTM_QDCTRL, field QUADMODE[3] (RW)
 *
 * Selects the encoding mode used in the Quadrature Decoder mode.
 *
 * Values:
 * - 0 - Phase A and phase B encoding mode.
 * - 1 - Count and direction encoding mode.
 */
/*@{*/
#define BP_FTM_QDCTRL_QUADMODE (3U)        /*!< Bit position for FTM_QDCTRL_QUADMODE. */
#define BM_FTM_QDCTRL_QUADMODE (0x00000008U) /*!< Bit mask for FTM_QDCTRL_QUADMODE. */
#define BS_FTM_QDCTRL_QUADMODE (1U)        /*!< Bit field size in bits for FTM_QDCTRL_QUADMODE. */

/*! @brief Read current value of the FTM_QDCTRL_QUADMODE field. */
#define BR_FTM_QDCTRL_QUADMODE(x) (BITBAND_ACCESS32(HW_FTM_QDCTRL_ADDR(x), BP_FTM_QDCTRL_QUADMODE))

/*! @brief Format value for bitfield FTM_QDCTRL_QUADMODE. */
#define BF_FTM_QDCTRL_QUADMODE(v) ((uint32_t)((uint32_t)(v) << BP_FTM_QDCTRL_QUADMODE) & BM_FTM_QDCTRL_QUADMODE)

/*! @brief Set the QUADMODE field to a new value. */
#define BW_FTM_QDCTRL_QUADMODE(x, v) (BITBAND_ACCESS32(HW_FTM_QDCTRL_ADDR(x), BP_FTM_QDCTRL_QUADMODE) = (v))
/*@}*/

/*!
 * @name Register FTM_QDCTRL, field PHBPOL[4] (RW)
 *
 * Selects the polarity for the quadrature decoder phase B input.
 *
 * Values:
 * - 0 - Normal polarity. Phase B input signal is not inverted before
 *     identifying the rising and falling edges of this signal.
 * - 1 - Inverted polarity. Phase B input signal is inverted before identifying
 *     the rising and falling edges of this signal.
 */
/*@{*/
#define BP_FTM_QDCTRL_PHBPOL (4U)          /*!< Bit position for FTM_QDCTRL_PHBPOL. */
#define BM_FTM_QDCTRL_PHBPOL (0x00000010U) /*!< Bit mask for FTM_QDCTRL_PHBPOL. */
#define BS_FTM_QDCTRL_PHBPOL (1U)          /*!< Bit field size in bits for FTM_QDCTRL_PHBPOL. */

/*! @brief Read current value of the FTM_QDCTRL_PHBPOL field. */
#define BR_FTM_QDCTRL_PHBPOL(x) (BITBAND_ACCESS32(HW_FTM_QDCTRL_ADDR(x), BP_FTM_QDCTRL_PHBPOL))

/*! @brief Format value for bitfield FTM_QDCTRL_PHBPOL. */
#define BF_FTM_QDCTRL_PHBPOL(v) ((uint32_t)((uint32_t)(v) << BP_FTM_QDCTRL_PHBPOL) & BM_FTM_QDCTRL_PHBPOL)

/*! @brief Set the PHBPOL field to a new value. */
#define BW_FTM_QDCTRL_PHBPOL(x, v) (BITBAND_ACCESS32(HW_FTM_QDCTRL_ADDR(x), BP_FTM_QDCTRL_PHBPOL) = (v))
/*@}*/

/*!
 * @name Register FTM_QDCTRL, field PHAPOL[5] (RW)
 *
 * Selects the polarity for the quadrature decoder phase A input.
 *
 * Values:
 * - 0 - Normal polarity. Phase A input signal is not inverted before
 *     identifying the rising and falling edges of this signal.
 * - 1 - Inverted polarity. Phase A input signal is inverted before identifying
 *     the rising and falling edges of this signal.
 */
/*@{*/
#define BP_FTM_QDCTRL_PHAPOL (5U)          /*!< Bit position for FTM_QDCTRL_PHAPOL. */
#define BM_FTM_QDCTRL_PHAPOL (0x00000020U) /*!< Bit mask for FTM_QDCTRL_PHAPOL. */
#define BS_FTM_QDCTRL_PHAPOL (1U)          /*!< Bit field size in bits for FTM_QDCTRL_PHAPOL. */

/*! @brief Read current value of the FTM_QDCTRL_PHAPOL field. */
#define BR_FTM_QDCTRL_PHAPOL(x) (BITBAND_ACCESS32(HW_FTM_QDCTRL_ADDR(x), BP_FTM_QDCTRL_PHAPOL))

/*! @brief Format value for bitfield FTM_QDCTRL_PHAPOL. */
#define BF_FTM_QDCTRL_PHAPOL(v) ((uint32_t)((uint32_t)(v) << BP_FTM_QDCTRL_PHAPOL) & BM_FTM_QDCTRL_PHAPOL)

/*! @brief Set the PHAPOL field to a new value. */
#define BW_FTM_QDCTRL_PHAPOL(x, v) (BITBAND_ACCESS32(HW_FTM_QDCTRL_ADDR(x), BP_FTM_QDCTRL_PHAPOL) = (v))
/*@}*/

/*!
 * @name Register FTM_QDCTRL, field PHBFLTREN[6] (RW)
 *
 * Enables the filter for the quadrature decoder phase B input. The filter value
 * for the phase B input is defined by the CH1FVAL field of FILTER. The phase B
 * filter is also disabled when CH1FVAL is zero.
 *
 * Values:
 * - 0 - Phase B input filter is disabled.
 * - 1 - Phase B input filter is enabled.
 */
/*@{*/
#define BP_FTM_QDCTRL_PHBFLTREN (6U)       /*!< Bit position for FTM_QDCTRL_PHBFLTREN. */
#define BM_FTM_QDCTRL_PHBFLTREN (0x00000040U) /*!< Bit mask for FTM_QDCTRL_PHBFLTREN. */
#define BS_FTM_QDCTRL_PHBFLTREN (1U)       /*!< Bit field size in bits for FTM_QDCTRL_PHBFLTREN. */

/*! @brief Read current value of the FTM_QDCTRL_PHBFLTREN field. */
#define BR_FTM_QDCTRL_PHBFLTREN(x) (BITBAND_ACCESS32(HW_FTM_QDCTRL_ADDR(x), BP_FTM_QDCTRL_PHBFLTREN))

/*! @brief Format value for bitfield FTM_QDCTRL_PHBFLTREN. */
#define BF_FTM_QDCTRL_PHBFLTREN(v) ((uint32_t)((uint32_t)(v) << BP_FTM_QDCTRL_PHBFLTREN) & BM_FTM_QDCTRL_PHBFLTREN)

/*! @brief Set the PHBFLTREN field to a new value. */
#define BW_FTM_QDCTRL_PHBFLTREN(x, v) (BITBAND_ACCESS32(HW_FTM_QDCTRL_ADDR(x), BP_FTM_QDCTRL_PHBFLTREN) = (v))
/*@}*/

/*!
 * @name Register FTM_QDCTRL, field PHAFLTREN[7] (RW)
 *
 * Enables the filter for the quadrature decoder phase A input. The filter value
 * for the phase A input is defined by the CH0FVAL field of FILTER. The phase A
 * filter is also disabled when CH0FVAL is zero.
 *
 * Values:
 * - 0 - Phase A input filter is disabled.
 * - 1 - Phase A input filter is enabled.
 */
/*@{*/
#define BP_FTM_QDCTRL_PHAFLTREN (7U)       /*!< Bit position for FTM_QDCTRL_PHAFLTREN. */
#define BM_FTM_QDCTRL_PHAFLTREN (0x00000080U) /*!< Bit mask for FTM_QDCTRL_PHAFLTREN. */
#define BS_FTM_QDCTRL_PHAFLTREN (1U)       /*!< Bit field size in bits for FTM_QDCTRL_PHAFLTREN. */

/*! @brief Read current value of the FTM_QDCTRL_PHAFLTREN field. */
#define BR_FTM_QDCTRL_PHAFLTREN(x) (BITBAND_ACCESS32(HW_FTM_QDCTRL_ADDR(x), BP_FTM_QDCTRL_PHAFLTREN))

/*! @brief Format value for bitfield FTM_QDCTRL_PHAFLTREN. */
#define BF_FTM_QDCTRL_PHAFLTREN(v) ((uint32_t)((uint32_t)(v) << BP_FTM_QDCTRL_PHAFLTREN) & BM_FTM_QDCTRL_PHAFLTREN)

/*! @brief Set the PHAFLTREN field to a new value. */
#define BW_FTM_QDCTRL_PHAFLTREN(x, v) (BITBAND_ACCESS32(HW_FTM_QDCTRL_ADDR(x), BP_FTM_QDCTRL_PHAFLTREN) = (v))
/*@}*/

/*******************************************************************************
 * HW_FTM_CONF - Configuration
 ******************************************************************************/

/*!
 * @brief HW_FTM_CONF - Configuration (RW)
 *
 * Reset value: 0x00000000U
 *
 * This register selects the number of times that the FTM counter overflow
 * should occur before the TOF bit to be set, the FTM behavior in BDM modes, the use
 * of an external global time base, and the global time base signal generation.
 */
typedef union _hw_ftm_conf
{
    uint32_t U;
    struct _hw_ftm_conf_bitfields
    {
        uint32_t NUMTOF : 5;           /*!< [4:0] TOF Frequency */
        uint32_t RESERVED0 : 1;        /*!< [5]  */
        uint32_t BDMMODE : 2;          /*!< [7:6] BDM Mode */
        uint32_t RESERVED1 : 1;        /*!< [8]  */
        uint32_t GTBEEN : 1;           /*!< [9] Global Time Base Enable */
        uint32_t GTBEOUT : 1;          /*!< [10] Global Time Base Output */
        uint32_t RESERVED2 : 21;       /*!< [31:11]  */
    } B;
} hw_ftm_conf_t;

/*!
 * @name Constants and macros for entire FTM_CONF register
 */
/*@{*/
#define HW_FTM_CONF_ADDR(x)      ((x) + 0x84U)

#define HW_FTM_CONF(x)           (*(__IO hw_ftm_conf_t *) HW_FTM_CONF_ADDR(x))
#define HW_FTM_CONF_RD(x)        (HW_FTM_CONF(x).U)
#define HW_FTM_CONF_WR(x, v)     (HW_FTM_CONF(x).U = (v))
#define HW_FTM_CONF_SET(x, v)    (HW_FTM_CONF_WR(x, HW_FTM_CONF_RD(x) |  (v)))
#define HW_FTM_CONF_CLR(x, v)    (HW_FTM_CONF_WR(x, HW_FTM_CONF_RD(x) & ~(v)))
#define HW_FTM_CONF_TOG(x, v)    (HW_FTM_CONF_WR(x, HW_FTM_CONF_RD(x) ^  (v)))
/*@}*/

/*
 * Constants & macros for individual FTM_CONF bitfields
 */

/*!
 * @name Register FTM_CONF, field NUMTOF[4:0] (RW)
 *
 * Selects the ratio between the number of counter overflows to the number of
 * times the TOF bit is set. NUMTOF = 0: The TOF bit is set for each counter
 * overflow. NUMTOF = 1: The TOF bit is set for the first counter overflow but not for
 * the next overflow. NUMTOF = 2: The TOF bit is set for the first counter
 * overflow but not for the next 2 overflows. NUMTOF = 3: The TOF bit is set for the
 * first counter overflow but not for the next 3 overflows. This pattern continues
 * up to a maximum of 31.
 */
/*@{*/
#define BP_FTM_CONF_NUMTOF   (0U)          /*!< Bit position for FTM_CONF_NUMTOF. */
#define BM_FTM_CONF_NUMTOF   (0x0000001FU) /*!< Bit mask for FTM_CONF_NUMTOF. */
#define BS_FTM_CONF_NUMTOF   (5U)          /*!< Bit field size in bits for FTM_CONF_NUMTOF. */

/*! @brief Read current value of the FTM_CONF_NUMTOF field. */
#define BR_FTM_CONF_NUMTOF(x) (HW_FTM_CONF(x).B.NUMTOF)

/*! @brief Format value for bitfield FTM_CONF_NUMTOF. */
#define BF_FTM_CONF_NUMTOF(v) ((uint32_t)((uint32_t)(v) << BP_FTM_CONF_NUMTOF) & BM_FTM_CONF_NUMTOF)

/*! @brief Set the NUMTOF field to a new value. */
#define BW_FTM_CONF_NUMTOF(x, v) (HW_FTM_CONF_WR(x, (HW_FTM_CONF_RD(x) & ~BM_FTM_CONF_NUMTOF) | BF_FTM_CONF_NUMTOF(v)))
/*@}*/

/*!
 * @name Register FTM_CONF, field BDMMODE[7:6] (RW)
 *
 * Selects the FTM behavior in BDM mode. See BDM mode.
 */
/*@{*/
#define BP_FTM_CONF_BDMMODE  (6U)          /*!< Bit position for FTM_CONF_BDMMODE. */
#define BM_FTM_CONF_BDMMODE  (0x000000C0U) /*!< Bit mask for FTM_CONF_BDMMODE. */
#define BS_FTM_CONF_BDMMODE  (2U)          /*!< Bit field size in bits for FTM_CONF_BDMMODE. */

/*! @brief Read current value of the FTM_CONF_BDMMODE field. */
#define BR_FTM_CONF_BDMMODE(x) (HW_FTM_CONF(x).B.BDMMODE)

/*! @brief Format value for bitfield FTM_CONF_BDMMODE. */
#define BF_FTM_CONF_BDMMODE(v) ((uint32_t)((uint32_t)(v) << BP_FTM_CONF_BDMMODE) & BM_FTM_CONF_BDMMODE)

/*! @brief Set the BDMMODE field to a new value. */
#define BW_FTM_CONF_BDMMODE(x, v) (HW_FTM_CONF_WR(x, (HW_FTM_CONF_RD(x) & ~BM_FTM_CONF_BDMMODE) | BF_FTM_CONF_BDMMODE(v)))
/*@}*/

/*!
 * @name Register FTM_CONF, field GTBEEN[9] (RW)
 *
 * Configures the FTM to use an external global time base signal that is
 * generated by another FTM.
 *
 * Values:
 * - 0 - Use of an external global time base is disabled.
 * - 1 - Use of an external global time base is enabled.
 */
/*@{*/
#define BP_FTM_CONF_GTBEEN   (9U)          /*!< Bit position for FTM_CONF_GTBEEN. */
#define BM_FTM_CONF_GTBEEN   (0x00000200U) /*!< Bit mask for FTM_CONF_GTBEEN. */
#define BS_FTM_CONF_GTBEEN   (1U)          /*!< Bit field size in bits for FTM_CONF_GTBEEN. */

/*! @brief Read current value of the FTM_CONF_GTBEEN field. */
#define BR_FTM_CONF_GTBEEN(x) (BITBAND_ACCESS32(HW_FTM_CONF_ADDR(x), BP_FTM_CONF_GTBEEN))

/*! @brief Format value for bitfield FTM_CONF_GTBEEN. */
#define BF_FTM_CONF_GTBEEN(v) ((uint32_t)((uint32_t)(v) << BP_FTM_CONF_GTBEEN) & BM_FTM_CONF_GTBEEN)

/*! @brief Set the GTBEEN field to a new value. */
#define BW_FTM_CONF_GTBEEN(x, v) (BITBAND_ACCESS32(HW_FTM_CONF_ADDR(x), BP_FTM_CONF_GTBEEN) = (v))
/*@}*/

/*!
 * @name Register FTM_CONF, field GTBEOUT[10] (RW)
 *
 * Enables the global time base signal generation to other FTMs.
 *
 * Values:
 * - 0 - A global time base signal generation is disabled.
 * - 1 - A global time base signal generation is enabled.
 */
/*@{*/
#define BP_FTM_CONF_GTBEOUT  (10U)         /*!< Bit position for FTM_CONF_GTBEOUT. */
#define BM_FTM_CONF_GTBEOUT  (0x00000400U) /*!< Bit mask for FTM_CONF_GTBEOUT. */
#define BS_FTM_CONF_GTBEOUT  (1U)          /*!< Bit field size in bits for FTM_CONF_GTBEOUT. */

/*! @brief Read current value of the FTM_CONF_GTBEOUT field. */
#define BR_FTM_CONF_GTBEOUT(x) (BITBAND_ACCESS32(HW_FTM_CONF_ADDR(x), BP_FTM_CONF_GTBEOUT))

/*! @brief Format value for bitfield FTM_CONF_GTBEOUT. */
#define BF_FTM_CONF_GTBEOUT(v) ((uint32_t)((uint32_t)(v) << BP_FTM_CONF_GTBEOUT) & BM_FTM_CONF_GTBEOUT)

/*! @brief Set the GTBEOUT field to a new value. */
#define BW_FTM_CONF_GTBEOUT(x, v) (BITBAND_ACCESS32(HW_FTM_CONF_ADDR(x), BP_FTM_CONF_GTBEOUT) = (v))
/*@}*/

/*******************************************************************************
 * HW_FTM_FLTPOL - FTM Fault Input Polarity
 ******************************************************************************/

/*!
 * @brief HW_FTM_FLTPOL - FTM Fault Input Polarity (RW)
 *
 * Reset value: 0x00000000U
 *
 * This register defines the fault inputs polarity.
 */
typedef union _hw_ftm_fltpol
{
    uint32_t U;
    struct _hw_ftm_fltpol_bitfields
    {
        uint32_t FLT0POL : 1;          /*!< [0] Fault Input 0 Polarity */
        uint32_t FLT1POL : 1;          /*!< [1] Fault Input 1 Polarity */
        uint32_t FLT2POL : 1;          /*!< [2] Fault Input 2 Polarity */
        uint32_t FLT3POL : 1;          /*!< [3] Fault Input 3 Polarity */
        uint32_t RESERVED0 : 28;       /*!< [31:4]  */
    } B;
} hw_ftm_fltpol_t;

/*!
 * @name Constants and macros for entire FTM_FLTPOL register
 */
/*@{*/
#define HW_FTM_FLTPOL_ADDR(x)    ((x) + 0x88U)

#define HW_FTM_FLTPOL(x)         (*(__IO hw_ftm_fltpol_t *) HW_FTM_FLTPOL_ADDR(x))
#define HW_FTM_FLTPOL_RD(x)      (HW_FTM_FLTPOL(x).U)
#define HW_FTM_FLTPOL_WR(x, v)   (HW_FTM_FLTPOL(x).U = (v))
#define HW_FTM_FLTPOL_SET(x, v)  (HW_FTM_FLTPOL_WR(x, HW_FTM_FLTPOL_RD(x) |  (v)))
#define HW_FTM_FLTPOL_CLR(x, v)  (HW_FTM_FLTPOL_WR(x, HW_FTM_FLTPOL_RD(x) & ~(v)))
#define HW_FTM_FLTPOL_TOG(x, v)  (HW_FTM_FLTPOL_WR(x, HW_FTM_FLTPOL_RD(x) ^  (v)))
/*@}*/

/*
 * Constants & macros for individual FTM_FLTPOL bitfields
 */

/*!
 * @name Register FTM_FLTPOL, field FLT0POL[0] (RW)
 *
 * Defines the polarity of the fault input. This field is write protected. It
 * can be written only when MODE[WPDIS] = 1.
 *
 * Values:
 * - 0 - The fault input polarity is active high. A 1 at the fault input
 *     indicates a fault.
 * - 1 - The fault input polarity is active low. A 0 at the fault input
 *     indicates a fault.
 */
/*@{*/
#define BP_FTM_FLTPOL_FLT0POL (0U)         /*!< Bit position for FTM_FLTPOL_FLT0POL. */
#define BM_FTM_FLTPOL_FLT0POL (0x00000001U) /*!< Bit mask for FTM_FLTPOL_FLT0POL. */
#define BS_FTM_FLTPOL_FLT0POL (1U)         /*!< Bit field size in bits for FTM_FLTPOL_FLT0POL. */

/*! @brief Read current value of the FTM_FLTPOL_FLT0POL field. */
#define BR_FTM_FLTPOL_FLT0POL(x) (BITBAND_ACCESS32(HW_FTM_FLTPOL_ADDR(x), BP_FTM_FLTPOL_FLT0POL))

/*! @brief Format value for bitfield FTM_FLTPOL_FLT0POL. */
#define BF_FTM_FLTPOL_FLT0POL(v) ((uint32_t)((uint32_t)(v) << BP_FTM_FLTPOL_FLT0POL) & BM_FTM_FLTPOL_FLT0POL)

/*! @brief Set the FLT0POL field to a new value. */
#define BW_FTM_FLTPOL_FLT0POL(x, v) (BITBAND_ACCESS32(HW_FTM_FLTPOL_ADDR(x), BP_FTM_FLTPOL_FLT0POL) = (v))
/*@}*/

/*!
 * @name Register FTM_FLTPOL, field FLT1POL[1] (RW)
 *
 * Defines the polarity of the fault input. This field is write protected. It
 * can be written only when MODE[WPDIS] = 1.
 *
 * Values:
 * - 0 - The fault input polarity is active high. A 1 at the fault input
 *     indicates a fault.
 * - 1 - The fault input polarity is active low. A 0 at the fault input
 *     indicates a fault.
 */
/*@{*/
#define BP_FTM_FLTPOL_FLT1POL (1U)         /*!< Bit position for FTM_FLTPOL_FLT1POL. */
#define BM_FTM_FLTPOL_FLT1POL (0x00000002U) /*!< Bit mask for FTM_FLTPOL_FLT1POL. */
#define BS_FTM_FLTPOL_FLT1POL (1U)         /*!< Bit field size in bits for FTM_FLTPOL_FLT1POL. */

/*! @brief Read current value of the FTM_FLTPOL_FLT1POL field. */
#define BR_FTM_FLTPOL_FLT1POL(x) (BITBAND_ACCESS32(HW_FTM_FLTPOL_ADDR(x), BP_FTM_FLTPOL_FLT1POL))

/*! @brief Format value for bitfield FTM_FLTPOL_FLT1POL. */
#define BF_FTM_FLTPOL_FLT1POL(v) ((uint32_t)((uint32_t)(v) << BP_FTM_FLTPOL_FLT1POL) & BM_FTM_FLTPOL_FLT1POL)

/*! @brief Set the FLT1POL field to a new value. */
#define BW_FTM_FLTPOL_FLT1POL(x, v) (BITBAND_ACCESS32(HW_FTM_FLTPOL_ADDR(x), BP_FTM_FLTPOL_FLT1POL) = (v))
/*@}*/

/*!
 * @name Register FTM_FLTPOL, field FLT2POL[2] (RW)
 *
 * Defines the polarity of the fault input. This field is write protected. It
 * can be written only when MODE[WPDIS] = 1.
 *
 * Values:
 * - 0 - The fault input polarity is active high. A 1 at the fault input
 *     indicates a fault.
 * - 1 - The fault input polarity is active low. A 0 at the fault input
 *     indicates a fault.
 */
/*@{*/
#define BP_FTM_FLTPOL_FLT2POL (2U)         /*!< Bit position for FTM_FLTPOL_FLT2POL. */
#define BM_FTM_FLTPOL_FLT2POL (0x00000004U) /*!< Bit mask for FTM_FLTPOL_FLT2POL. */
#define BS_FTM_FLTPOL_FLT2POL (1U)         /*!< Bit field size in bits for FTM_FLTPOL_FLT2POL. */

/*! @brief Read current value of the FTM_FLTPOL_FLT2POL field. */
#define BR_FTM_FLTPOL_FLT2POL(x) (BITBAND_ACCESS32(HW_FTM_FLTPOL_ADDR(x), BP_FTM_FLTPOL_FLT2POL))

/*! @brief Format value for bitfield FTM_FLTPOL_FLT2POL. */
#define BF_FTM_FLTPOL_FLT2POL(v) ((uint32_t)((uint32_t)(v) << BP_FTM_FLTPOL_FLT2POL) & BM_FTM_FLTPOL_FLT2POL)

/*! @brief Set the FLT2POL field to a new value. */
#define BW_FTM_FLTPOL_FLT2POL(x, v) (BITBAND_ACCESS32(HW_FTM_FLTPOL_ADDR(x), BP_FTM_FLTPOL_FLT2POL) = (v))
/*@}*/

/*!
 * @name Register FTM_FLTPOL, field FLT3POL[3] (RW)
 *
 * Defines the polarity of the fault input. This field is write protected. It
 * can be written only when MODE[WPDIS] = 1.
 *
 * Values:
 * - 0 - The fault input polarity is active high. A 1 at the fault input
 *     indicates a fault.
 * - 1 - The fault input polarity is active low. A 0 at the fault input
 *     indicates a fault.
 */
/*@{*/
#define BP_FTM_FLTPOL_FLT3POL (3U)         /*!< Bit position for FTM_FLTPOL_FLT3POL. */
#define BM_FTM_FLTPOL_FLT3POL (0x00000008U) /*!< Bit mask for FTM_FLTPOL_FLT3POL. */
#define BS_FTM_FLTPOL_FLT3POL (1U)         /*!< Bit field size in bits for FTM_FLTPOL_FLT3POL. */

/*! @brief Read current value of the FTM_FLTPOL_FLT3POL field. */
#define BR_FTM_FLTPOL_FLT3POL(x) (BITBAND_ACCESS32(HW_FTM_FLTPOL_ADDR(x), BP_FTM_FLTPOL_FLT3POL))

/*! @brief Format value for bitfield FTM_FLTPOL_FLT3POL. */
#define BF_FTM_FLTPOL_FLT3POL(v) ((uint32_t)((uint32_t)(v) << BP_FTM_FLTPOL_FLT3POL) & BM_FTM_FLTPOL_FLT3POL)

/*! @brief Set the FLT3POL field to a new value. */
#define BW_FTM_FLTPOL_FLT3POL(x, v) (BITBAND_ACCESS32(HW_FTM_FLTPOL_ADDR(x), BP_FTM_FLTPOL_FLT3POL) = (v))
/*@}*/

/*******************************************************************************
 * HW_FTM_SYNCONF - Synchronization Configuration
 ******************************************************************************/

/*!
 * @brief HW_FTM_SYNCONF - Synchronization Configuration (RW)
 *
 * Reset value: 0x00000000U
 *
 * This register selects the PWM synchronization configuration, SWOCTRL, INVCTRL
 * and CNTIN registers synchronization, if FTM clears the TRIGj bit, where j =
 * 0, 1, 2, when the hardware trigger j is detected.
 */
typedef union _hw_ftm_synconf
{
    uint32_t U;
    struct _hw_ftm_synconf_bitfields
    {
        uint32_t HWTRIGMODE : 1;       /*!< [0] Hardware Trigger Mode */
        uint32_t RESERVED0 : 1;        /*!< [1]  */
        uint32_t CNTINC : 1;           /*!< [2] CNTIN Register Synchronization */
        uint32_t RESERVED1 : 1;        /*!< [3]  */
        uint32_t INVC : 1;             /*!< [4] INVCTRL Register Synchronization */
        uint32_t SWOC : 1;             /*!< [5] SWOCTRL Register Synchronization */
        uint32_t RESERVED2 : 1;        /*!< [6]  */
        uint32_t SYNCMODE : 1;         /*!< [7] Synchronization Mode */
        uint32_t SWRSTCNT : 1;         /*!< [8]  */
        uint32_t SWWRBUF : 1;          /*!< [9]  */
        uint32_t SWOM : 1;             /*!< [10]  */
        uint32_t SWINVC : 1;           /*!< [11]  */
        uint32_t SWSOC : 1;            /*!< [12]  */
        uint32_t RESERVED3 : 3;        /*!< [15:13]  */
        uint32_t HWRSTCNT : 1;         /*!< [16]  */
        uint32_t HWWRBUF : 1;          /*!< [17]  */
        uint32_t HWOM : 1;             /*!< [18]  */
        uint32_t HWINVC : 1;           /*!< [19]  */
        uint32_t HWSOC : 1;            /*!< [20]  */
        uint32_t RESERVED4 : 11;       /*!< [31:21]  */
    } B;
} hw_ftm_synconf_t;

/*!
 * @name Constants and macros for entire FTM_SYNCONF register
 */
/*@{*/
#define HW_FTM_SYNCONF_ADDR(x)   ((x) + 0x8CU)

#define HW_FTM_SYNCONF(x)        (*(__IO hw_ftm_synconf_t *) HW_FTM_SYNCONF_ADDR(x))
#define HW_FTM_SYNCONF_RD(x)     (HW_FTM_SYNCONF(x).U)
#define HW_FTM_SYNCONF_WR(x, v)  (HW_FTM_SYNCONF(x).U = (v))
#define HW_FTM_SYNCONF_SET(x, v) (HW_FTM_SYNCONF_WR(x, HW_FTM_SYNCONF_RD(x) |  (v)))
#define HW_FTM_SYNCONF_CLR(x, v) (HW_FTM_SYNCONF_WR(x, HW_FTM_SYNCONF_RD(x) & ~(v)))
#define HW_FTM_SYNCONF_TOG(x, v) (HW_FTM_SYNCONF_WR(x, HW_FTM_SYNCONF_RD(x) ^  (v)))
/*@}*/

/*
 * Constants & macros for individual FTM_SYNCONF bitfields
 */

/*!
 * @name Register FTM_SYNCONF, field HWTRIGMODE[0] (RW)
 *
 * Values:
 * - 0 - FTM clears the TRIGj bit when the hardware trigger j is detected, where
 *     j = 0, 1,2.
 * - 1 - FTM does not clear the TRIGj bit when the hardware trigger j is
 *     detected, where j = 0, 1,2.
 */
/*@{*/
#define BP_FTM_SYNCONF_HWTRIGMODE (0U)     /*!< Bit position for FTM_SYNCONF_HWTRIGMODE. */
#define BM_FTM_SYNCONF_HWTRIGMODE (0x00000001U) /*!< Bit mask for FTM_SYNCONF_HWTRIGMODE. */
#define BS_FTM_SYNCONF_HWTRIGMODE (1U)     /*!< Bit field size in bits for FTM_SYNCONF_HWTRIGMODE. */

/*! @brief Read current value of the FTM_SYNCONF_HWTRIGMODE field. */
#define BR_FTM_SYNCONF_HWTRIGMODE(x) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_HWTRIGMODE))

/*! @brief Format value for bitfield FTM_SYNCONF_HWTRIGMODE. */
#define BF_FTM_SYNCONF_HWTRIGMODE(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SYNCONF_HWTRIGMODE) & BM_FTM_SYNCONF_HWTRIGMODE)

/*! @brief Set the HWTRIGMODE field to a new value. */
#define BW_FTM_SYNCONF_HWTRIGMODE(x, v) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_HWTRIGMODE) = (v))
/*@}*/

/*!
 * @name Register FTM_SYNCONF, field CNTINC[2] (RW)
 *
 * Values:
 * - 0 - CNTIN register is updated with its buffer value at all rising edges of
 *     system clock.
 * - 1 - CNTIN register is updated with its buffer value by the PWM
 *     synchronization.
 */
/*@{*/
#define BP_FTM_SYNCONF_CNTINC (2U)         /*!< Bit position for FTM_SYNCONF_CNTINC. */
#define BM_FTM_SYNCONF_CNTINC (0x00000004U) /*!< Bit mask for FTM_SYNCONF_CNTINC. */
#define BS_FTM_SYNCONF_CNTINC (1U)         /*!< Bit field size in bits for FTM_SYNCONF_CNTINC. */

/*! @brief Read current value of the FTM_SYNCONF_CNTINC field. */
#define BR_FTM_SYNCONF_CNTINC(x) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_CNTINC))

/*! @brief Format value for bitfield FTM_SYNCONF_CNTINC. */
#define BF_FTM_SYNCONF_CNTINC(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SYNCONF_CNTINC) & BM_FTM_SYNCONF_CNTINC)

/*! @brief Set the CNTINC field to a new value. */
#define BW_FTM_SYNCONF_CNTINC(x, v) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_CNTINC) = (v))
/*@}*/

/*!
 * @name Register FTM_SYNCONF, field INVC[4] (RW)
 *
 * Values:
 * - 0 - INVCTRL register is updated with its buffer value at all rising edges
 *     of system clock.
 * - 1 - INVCTRL register is updated with its buffer value by the PWM
 *     synchronization.
 */
/*@{*/
#define BP_FTM_SYNCONF_INVC  (4U)          /*!< Bit position for FTM_SYNCONF_INVC. */
#define BM_FTM_SYNCONF_INVC  (0x00000010U) /*!< Bit mask for FTM_SYNCONF_INVC. */
#define BS_FTM_SYNCONF_INVC  (1U)          /*!< Bit field size in bits for FTM_SYNCONF_INVC. */

/*! @brief Read current value of the FTM_SYNCONF_INVC field. */
#define BR_FTM_SYNCONF_INVC(x) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_INVC))

/*! @brief Format value for bitfield FTM_SYNCONF_INVC. */
#define BF_FTM_SYNCONF_INVC(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SYNCONF_INVC) & BM_FTM_SYNCONF_INVC)

/*! @brief Set the INVC field to a new value. */
#define BW_FTM_SYNCONF_INVC(x, v) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_INVC) = (v))
/*@}*/

/*!
 * @name Register FTM_SYNCONF, field SWOC[5] (RW)
 *
 * Values:
 * - 0 - SWOCTRL register is updated with its buffer value at all rising edges
 *     of system clock.
 * - 1 - SWOCTRL register is updated with its buffer value by the PWM
 *     synchronization.
 */
/*@{*/
#define BP_FTM_SYNCONF_SWOC  (5U)          /*!< Bit position for FTM_SYNCONF_SWOC. */
#define BM_FTM_SYNCONF_SWOC  (0x00000020U) /*!< Bit mask for FTM_SYNCONF_SWOC. */
#define BS_FTM_SYNCONF_SWOC  (1U)          /*!< Bit field size in bits for FTM_SYNCONF_SWOC. */

/*! @brief Read current value of the FTM_SYNCONF_SWOC field. */
#define BR_FTM_SYNCONF_SWOC(x) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_SWOC))

/*! @brief Format value for bitfield FTM_SYNCONF_SWOC. */
#define BF_FTM_SYNCONF_SWOC(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SYNCONF_SWOC) & BM_FTM_SYNCONF_SWOC)

/*! @brief Set the SWOC field to a new value. */
#define BW_FTM_SYNCONF_SWOC(x, v) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_SWOC) = (v))
/*@}*/

/*!
 * @name Register FTM_SYNCONF, field SYNCMODE[7] (RW)
 *
 * Selects the PWM Synchronization mode.
 *
 * Values:
 * - 0 - Legacy PWM synchronization is selected.
 * - 1 - Enhanced PWM synchronization is selected.
 */
/*@{*/
#define BP_FTM_SYNCONF_SYNCMODE (7U)       /*!< Bit position for FTM_SYNCONF_SYNCMODE. */
#define BM_FTM_SYNCONF_SYNCMODE (0x00000080U) /*!< Bit mask for FTM_SYNCONF_SYNCMODE. */
#define BS_FTM_SYNCONF_SYNCMODE (1U)       /*!< Bit field size in bits for FTM_SYNCONF_SYNCMODE. */

/*! @brief Read current value of the FTM_SYNCONF_SYNCMODE field. */
#define BR_FTM_SYNCONF_SYNCMODE(x) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_SYNCMODE))

/*! @brief Format value for bitfield FTM_SYNCONF_SYNCMODE. */
#define BF_FTM_SYNCONF_SYNCMODE(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SYNCONF_SYNCMODE) & BM_FTM_SYNCONF_SYNCMODE)

/*! @brief Set the SYNCMODE field to a new value. */
#define BW_FTM_SYNCONF_SYNCMODE(x, v) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_SYNCMODE) = (v))
/*@}*/

/*!
 * @name Register FTM_SYNCONF, field SWRSTCNT[8] (RW)
 *
 * FTM counter synchronization is activated by the software trigger.
 *
 * Values:
 * - 0 - The software trigger does not activate the FTM counter synchronization.
 * - 1 - The software trigger activates the FTM counter synchronization.
 */
/*@{*/
#define BP_FTM_SYNCONF_SWRSTCNT (8U)       /*!< Bit position for FTM_SYNCONF_SWRSTCNT. */
#define BM_FTM_SYNCONF_SWRSTCNT (0x00000100U) /*!< Bit mask for FTM_SYNCONF_SWRSTCNT. */
#define BS_FTM_SYNCONF_SWRSTCNT (1U)       /*!< Bit field size in bits for FTM_SYNCONF_SWRSTCNT. */

/*! @brief Read current value of the FTM_SYNCONF_SWRSTCNT field. */
#define BR_FTM_SYNCONF_SWRSTCNT(x) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_SWRSTCNT))

/*! @brief Format value for bitfield FTM_SYNCONF_SWRSTCNT. */
#define BF_FTM_SYNCONF_SWRSTCNT(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SYNCONF_SWRSTCNT) & BM_FTM_SYNCONF_SWRSTCNT)

/*! @brief Set the SWRSTCNT field to a new value. */
#define BW_FTM_SYNCONF_SWRSTCNT(x, v) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_SWRSTCNT) = (v))
/*@}*/

/*!
 * @name Register FTM_SYNCONF, field SWWRBUF[9] (RW)
 *
 * MOD, CNTIN, and CV registers synchronization is activated by the software
 * trigger.
 *
 * Values:
 * - 0 - The software trigger does not activate MOD, CNTIN, and CV registers
 *     synchronization.
 * - 1 - The software trigger activates MOD, CNTIN, and CV registers
 *     synchronization.
 */
/*@{*/
#define BP_FTM_SYNCONF_SWWRBUF (9U)        /*!< Bit position for FTM_SYNCONF_SWWRBUF. */
#define BM_FTM_SYNCONF_SWWRBUF (0x00000200U) /*!< Bit mask for FTM_SYNCONF_SWWRBUF. */
#define BS_FTM_SYNCONF_SWWRBUF (1U)        /*!< Bit field size in bits for FTM_SYNCONF_SWWRBUF. */

/*! @brief Read current value of the FTM_SYNCONF_SWWRBUF field. */
#define BR_FTM_SYNCONF_SWWRBUF(x) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_SWWRBUF))

/*! @brief Format value for bitfield FTM_SYNCONF_SWWRBUF. */
#define BF_FTM_SYNCONF_SWWRBUF(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SYNCONF_SWWRBUF) & BM_FTM_SYNCONF_SWWRBUF)

/*! @brief Set the SWWRBUF field to a new value. */
#define BW_FTM_SYNCONF_SWWRBUF(x, v) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_SWWRBUF) = (v))
/*@}*/

/*!
 * @name Register FTM_SYNCONF, field SWOM[10] (RW)
 *
 * Output mask synchronization is activated by the software trigger.
 *
 * Values:
 * - 0 - The software trigger does not activate the OUTMASK register
 *     synchronization.
 * - 1 - The software trigger activates the OUTMASK register synchronization.
 */
/*@{*/
#define BP_FTM_SYNCONF_SWOM  (10U)         /*!< Bit position for FTM_SYNCONF_SWOM. */
#define BM_FTM_SYNCONF_SWOM  (0x00000400U) /*!< Bit mask for FTM_SYNCONF_SWOM. */
#define BS_FTM_SYNCONF_SWOM  (1U)          /*!< Bit field size in bits for FTM_SYNCONF_SWOM. */

/*! @brief Read current value of the FTM_SYNCONF_SWOM field. */
#define BR_FTM_SYNCONF_SWOM(x) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_SWOM))

/*! @brief Format value for bitfield FTM_SYNCONF_SWOM. */
#define BF_FTM_SYNCONF_SWOM(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SYNCONF_SWOM) & BM_FTM_SYNCONF_SWOM)

/*! @brief Set the SWOM field to a new value. */
#define BW_FTM_SYNCONF_SWOM(x, v) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_SWOM) = (v))
/*@}*/

/*!
 * @name Register FTM_SYNCONF, field SWINVC[11] (RW)
 *
 * Inverting control synchronization is activated by the software trigger.
 *
 * Values:
 * - 0 - The software trigger does not activate the INVCTRL register
 *     synchronization.
 * - 1 - The software trigger activates the INVCTRL register synchronization.
 */
/*@{*/
#define BP_FTM_SYNCONF_SWINVC (11U)        /*!< Bit position for FTM_SYNCONF_SWINVC. */
#define BM_FTM_SYNCONF_SWINVC (0x00000800U) /*!< Bit mask for FTM_SYNCONF_SWINVC. */
#define BS_FTM_SYNCONF_SWINVC (1U)         /*!< Bit field size in bits for FTM_SYNCONF_SWINVC. */

/*! @brief Read current value of the FTM_SYNCONF_SWINVC field. */
#define BR_FTM_SYNCONF_SWINVC(x) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_SWINVC))

/*! @brief Format value for bitfield FTM_SYNCONF_SWINVC. */
#define BF_FTM_SYNCONF_SWINVC(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SYNCONF_SWINVC) & BM_FTM_SYNCONF_SWINVC)

/*! @brief Set the SWINVC field to a new value. */
#define BW_FTM_SYNCONF_SWINVC(x, v) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_SWINVC) = (v))
/*@}*/

/*!
 * @name Register FTM_SYNCONF, field SWSOC[12] (RW)
 *
 * Software output control synchronization is activated by the software trigger.
 *
 * Values:
 * - 0 - The software trigger does not activate the SWOCTRL register
 *     synchronization.
 * - 1 - The software trigger activates the SWOCTRL register synchronization.
 */
/*@{*/
#define BP_FTM_SYNCONF_SWSOC (12U)         /*!< Bit position for FTM_SYNCONF_SWSOC. */
#define BM_FTM_SYNCONF_SWSOC (0x00001000U) /*!< Bit mask for FTM_SYNCONF_SWSOC. */
#define BS_FTM_SYNCONF_SWSOC (1U)          /*!< Bit field size in bits for FTM_SYNCONF_SWSOC. */

/*! @brief Read current value of the FTM_SYNCONF_SWSOC field. */
#define BR_FTM_SYNCONF_SWSOC(x) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_SWSOC))

/*! @brief Format value for bitfield FTM_SYNCONF_SWSOC. */
#define BF_FTM_SYNCONF_SWSOC(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SYNCONF_SWSOC) & BM_FTM_SYNCONF_SWSOC)

/*! @brief Set the SWSOC field to a new value. */
#define BW_FTM_SYNCONF_SWSOC(x, v) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_SWSOC) = (v))
/*@}*/

/*!
 * @name Register FTM_SYNCONF, field HWRSTCNT[16] (RW)
 *
 * FTM counter synchronization is activated by a hardware trigger.
 *
 * Values:
 * - 0 - A hardware trigger does not activate the FTM counter synchronization.
 * - 1 - A hardware trigger activates the FTM counter synchronization.
 */
/*@{*/
#define BP_FTM_SYNCONF_HWRSTCNT (16U)      /*!< Bit position for FTM_SYNCONF_HWRSTCNT. */
#define BM_FTM_SYNCONF_HWRSTCNT (0x00010000U) /*!< Bit mask for FTM_SYNCONF_HWRSTCNT. */
#define BS_FTM_SYNCONF_HWRSTCNT (1U)       /*!< Bit field size in bits for FTM_SYNCONF_HWRSTCNT. */

/*! @brief Read current value of the FTM_SYNCONF_HWRSTCNT field. */
#define BR_FTM_SYNCONF_HWRSTCNT(x) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_HWRSTCNT))

/*! @brief Format value for bitfield FTM_SYNCONF_HWRSTCNT. */
#define BF_FTM_SYNCONF_HWRSTCNT(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SYNCONF_HWRSTCNT) & BM_FTM_SYNCONF_HWRSTCNT)

/*! @brief Set the HWRSTCNT field to a new value. */
#define BW_FTM_SYNCONF_HWRSTCNT(x, v) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_HWRSTCNT) = (v))
/*@}*/

/*!
 * @name Register FTM_SYNCONF, field HWWRBUF[17] (RW)
 *
 * MOD, CNTIN, and CV registers synchronization is activated by a hardware
 * trigger.
 *
 * Values:
 * - 0 - A hardware trigger does not activate MOD, CNTIN, and CV registers
 *     synchronization.
 * - 1 - A hardware trigger activates MOD, CNTIN, and CV registers
 *     synchronization.
 */
/*@{*/
#define BP_FTM_SYNCONF_HWWRBUF (17U)       /*!< Bit position for FTM_SYNCONF_HWWRBUF. */
#define BM_FTM_SYNCONF_HWWRBUF (0x00020000U) /*!< Bit mask for FTM_SYNCONF_HWWRBUF. */
#define BS_FTM_SYNCONF_HWWRBUF (1U)        /*!< Bit field size in bits for FTM_SYNCONF_HWWRBUF. */

/*! @brief Read current value of the FTM_SYNCONF_HWWRBUF field. */
#define BR_FTM_SYNCONF_HWWRBUF(x) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_HWWRBUF))

/*! @brief Format value for bitfield FTM_SYNCONF_HWWRBUF. */
#define BF_FTM_SYNCONF_HWWRBUF(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SYNCONF_HWWRBUF) & BM_FTM_SYNCONF_HWWRBUF)

/*! @brief Set the HWWRBUF field to a new value. */
#define BW_FTM_SYNCONF_HWWRBUF(x, v) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_HWWRBUF) = (v))
/*@}*/

/*!
 * @name Register FTM_SYNCONF, field HWOM[18] (RW)
 *
 * Output mask synchronization is activated by a hardware trigger.
 *
 * Values:
 * - 0 - A hardware trigger does not activate the OUTMASK register
 *     synchronization.
 * - 1 - A hardware trigger activates the OUTMASK register synchronization.
 */
/*@{*/
#define BP_FTM_SYNCONF_HWOM  (18U)         /*!< Bit position for FTM_SYNCONF_HWOM. */
#define BM_FTM_SYNCONF_HWOM  (0x00040000U) /*!< Bit mask for FTM_SYNCONF_HWOM. */
#define BS_FTM_SYNCONF_HWOM  (1U)          /*!< Bit field size in bits for FTM_SYNCONF_HWOM. */

/*! @brief Read current value of the FTM_SYNCONF_HWOM field. */
#define BR_FTM_SYNCONF_HWOM(x) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_HWOM))

/*! @brief Format value for bitfield FTM_SYNCONF_HWOM. */
#define BF_FTM_SYNCONF_HWOM(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SYNCONF_HWOM) & BM_FTM_SYNCONF_HWOM)

/*! @brief Set the HWOM field to a new value. */
#define BW_FTM_SYNCONF_HWOM(x, v) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_HWOM) = (v))
/*@}*/

/*!
 * @name Register FTM_SYNCONF, field HWINVC[19] (RW)
 *
 * Inverting control synchronization is activated by a hardware trigger.
 *
 * Values:
 * - 0 - A hardware trigger does not activate the INVCTRL register
 *     synchronization.
 * - 1 - A hardware trigger activates the INVCTRL register synchronization.
 */
/*@{*/
#define BP_FTM_SYNCONF_HWINVC (19U)        /*!< Bit position for FTM_SYNCONF_HWINVC. */
#define BM_FTM_SYNCONF_HWINVC (0x00080000U) /*!< Bit mask for FTM_SYNCONF_HWINVC. */
#define BS_FTM_SYNCONF_HWINVC (1U)         /*!< Bit field size in bits for FTM_SYNCONF_HWINVC. */

/*! @brief Read current value of the FTM_SYNCONF_HWINVC field. */
#define BR_FTM_SYNCONF_HWINVC(x) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_HWINVC))

/*! @brief Format value for bitfield FTM_SYNCONF_HWINVC. */
#define BF_FTM_SYNCONF_HWINVC(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SYNCONF_HWINVC) & BM_FTM_SYNCONF_HWINVC)

/*! @brief Set the HWINVC field to a new value. */
#define BW_FTM_SYNCONF_HWINVC(x, v) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_HWINVC) = (v))
/*@}*/

/*!
 * @name Register FTM_SYNCONF, field HWSOC[20] (RW)
 *
 * Software output control synchronization is activated by a hardware trigger.
 *
 * Values:
 * - 0 - A hardware trigger does not activate the SWOCTRL register
 *     synchronization.
 * - 1 - A hardware trigger activates the SWOCTRL register synchronization.
 */
/*@{*/
#define BP_FTM_SYNCONF_HWSOC (20U)         /*!< Bit position for FTM_SYNCONF_HWSOC. */
#define BM_FTM_SYNCONF_HWSOC (0x00100000U) /*!< Bit mask for FTM_SYNCONF_HWSOC. */
#define BS_FTM_SYNCONF_HWSOC (1U)          /*!< Bit field size in bits for FTM_SYNCONF_HWSOC. */

/*! @brief Read current value of the FTM_SYNCONF_HWSOC field. */
#define BR_FTM_SYNCONF_HWSOC(x) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_HWSOC))

/*! @brief Format value for bitfield FTM_SYNCONF_HWSOC. */
#define BF_FTM_SYNCONF_HWSOC(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SYNCONF_HWSOC) & BM_FTM_SYNCONF_HWSOC)

/*! @brief Set the HWSOC field to a new value. */
#define BW_FTM_SYNCONF_HWSOC(x, v) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_HWSOC) = (v))
/*@}*/

/*******************************************************************************
 * HW_FTM_INVCTRL - FTM Inverting Control
 ******************************************************************************/

/*!
 * @brief HW_FTM_INVCTRL - FTM Inverting Control (RW)
 *
 * Reset value: 0x00000000U
 *
 * This register controls when the channel (n) output becomes the channel (n+1)
 * output, and channel (n+1) output becomes the channel (n) output. Each INVmEN
 * bit enables the inverting operation for the corresponding pair channels m. This
 * register has a write buffer. The INVmEN bit is updated by the INVCTRL
 * register synchronization.
 */
typedef union _hw_ftm_invctrl
{
    uint32_t U;
    struct _hw_ftm_invctrl_bitfields
    {
        uint32_t INV0EN : 1;           /*!< [0] Pair Channels 0 Inverting Enable */
        uint32_t INV1EN : 1;           /*!< [1] Pair Channels 1 Inverting Enable */
        uint32_t INV2EN : 1;           /*!< [2] Pair Channels 2 Inverting Enable */
        uint32_t INV3EN : 1;           /*!< [3] Pair Channels 3 Inverting Enable */
        uint32_t RESERVED0 : 28;       /*!< [31:4]  */
    } B;
} hw_ftm_invctrl_t;

/*!
 * @name Constants and macros for entire FTM_INVCTRL register
 */
/*@{*/
#define HW_FTM_INVCTRL_ADDR(x)   ((x) + 0x90U)

#define HW_FTM_INVCTRL(x)        (*(__IO hw_ftm_invctrl_t *) HW_FTM_INVCTRL_ADDR(x))
#define HW_FTM_INVCTRL_RD(x)     (HW_FTM_INVCTRL(x).U)
#define HW_FTM_INVCTRL_WR(x, v)  (HW_FTM_INVCTRL(x).U = (v))
#define HW_FTM_INVCTRL_SET(x, v) (HW_FTM_INVCTRL_WR(x, HW_FTM_INVCTRL_RD(x) |  (v)))
#define HW_FTM_INVCTRL_CLR(x, v) (HW_FTM_INVCTRL_WR(x, HW_FTM_INVCTRL_RD(x) & ~(v)))
#define HW_FTM_INVCTRL_TOG(x, v) (HW_FTM_INVCTRL_WR(x, HW_FTM_INVCTRL_RD(x) ^  (v)))
/*@}*/

/*
 * Constants & macros for individual FTM_INVCTRL bitfields
 */

/*!
 * @name Register FTM_INVCTRL, field INV0EN[0] (RW)
 *
 * Values:
 * - 0 - Inverting is disabled.
 * - 1 - Inverting is enabled.
 */
/*@{*/
#define BP_FTM_INVCTRL_INV0EN (0U)         /*!< Bit position for FTM_INVCTRL_INV0EN. */
#define BM_FTM_INVCTRL_INV0EN (0x00000001U) /*!< Bit mask for FTM_INVCTRL_INV0EN. */
#define BS_FTM_INVCTRL_INV0EN (1U)         /*!< Bit field size in bits for FTM_INVCTRL_INV0EN. */

/*! @brief Read current value of the FTM_INVCTRL_INV0EN field. */
#define BR_FTM_INVCTRL_INV0EN(x) (BITBAND_ACCESS32(HW_FTM_INVCTRL_ADDR(x), BP_FTM_INVCTRL_INV0EN))

/*! @brief Format value for bitfield FTM_INVCTRL_INV0EN. */
#define BF_FTM_INVCTRL_INV0EN(v) ((uint32_t)((uint32_t)(v) << BP_FTM_INVCTRL_INV0EN) & BM_FTM_INVCTRL_INV0EN)

/*! @brief Set the INV0EN field to a new value. */
#define BW_FTM_INVCTRL_INV0EN(x, v) (BITBAND_ACCESS32(HW_FTM_INVCTRL_ADDR(x), BP_FTM_INVCTRL_INV0EN) = (v))
/*@}*/

/*!
 * @name Register FTM_INVCTRL, field INV1EN[1] (RW)
 *
 * Values:
 * - 0 - Inverting is disabled.
 * - 1 - Inverting is enabled.
 */
/*@{*/
#define BP_FTM_INVCTRL_INV1EN (1U)         /*!< Bit position for FTM_INVCTRL_INV1EN. */
#define BM_FTM_INVCTRL_INV1EN (0x00000002U) /*!< Bit mask for FTM_INVCTRL_INV1EN. */
#define BS_FTM_INVCTRL_INV1EN (1U)         /*!< Bit field size in bits for FTM_INVCTRL_INV1EN. */

/*! @brief Read current value of the FTM_INVCTRL_INV1EN field. */
#define BR_FTM_INVCTRL_INV1EN(x) (BITBAND_ACCESS32(HW_FTM_INVCTRL_ADDR(x), BP_FTM_INVCTRL_INV1EN))

/*! @brief Format value for bitfield FTM_INVCTRL_INV1EN. */
#define BF_FTM_INVCTRL_INV1EN(v) ((uint32_t)((uint32_t)(v) << BP_FTM_INVCTRL_INV1EN) & BM_FTM_INVCTRL_INV1EN)

/*! @brief Set the INV1EN field to a new value. */
#define BW_FTM_INVCTRL_INV1EN(x, v) (BITBAND_ACCESS32(HW_FTM_INVCTRL_ADDR(x), BP_FTM_INVCTRL_INV1EN) = (v))
/*@}*/

/*!
 * @name Register FTM_INVCTRL, field INV2EN[2] (RW)
 *
 * Values:
 * - 0 - Inverting is disabled.
 * - 1 - Inverting is enabled.
 */
/*@{*/
#define BP_FTM_INVCTRL_INV2EN (2U)         /*!< Bit position for FTM_INVCTRL_INV2EN. */
#define BM_FTM_INVCTRL_INV2EN (0x00000004U) /*!< Bit mask for FTM_INVCTRL_INV2EN. */
#define BS_FTM_INVCTRL_INV2EN (1U)         /*!< Bit field size in bits for FTM_INVCTRL_INV2EN. */

/*! @brief Read current value of the FTM_INVCTRL_INV2EN field. */
#define BR_FTM_INVCTRL_INV2EN(x) (BITBAND_ACCESS32(HW_FTM_INVCTRL_ADDR(x), BP_FTM_INVCTRL_INV2EN))

/*! @brief Format value for bitfield FTM_INVCTRL_INV2EN. */
#define BF_FTM_INVCTRL_INV2EN(v) ((uint32_t)((uint32_t)(v) << BP_FTM_INVCTRL_INV2EN) & BM_FTM_INVCTRL_INV2EN)

/*! @brief Set the INV2EN field to a new value. */
#define BW_FTM_INVCTRL_INV2EN(x, v) (BITBAND_ACCESS32(HW_FTM_INVCTRL_ADDR(x), BP_FTM_INVCTRL_INV2EN) = (v))
/*@}*/

/*!
 * @name Register FTM_INVCTRL, field INV3EN[3] (RW)
 *
 * Values:
 * - 0 - Inverting is disabled.
 * - 1 - Inverting is enabled.
 */
/*@{*/
#define BP_FTM_INVCTRL_INV3EN (3U)         /*!< Bit position for FTM_INVCTRL_INV3EN. */
#define BM_FTM_INVCTRL_INV3EN (0x00000008U) /*!< Bit mask for FTM_INVCTRL_INV3EN. */
#define BS_FTM_INVCTRL_INV3EN (1U)         /*!< Bit field size in bits for FTM_INVCTRL_INV3EN. */

/*! @brief Read current value of the FTM_INVCTRL_INV3EN field. */
#define BR_FTM_INVCTRL_INV3EN(x) (BITBAND_ACCESS32(HW_FTM_INVCTRL_ADDR(x), BP_FTM_INVCTRL_INV3EN))

/*! @brief Format value for bitfield FTM_INVCTRL_INV3EN. */
#define BF_FTM_INVCTRL_INV3EN(v) ((uint32_t)((uint32_t)(v) << BP_FTM_INVCTRL_INV3EN) & BM_FTM_INVCTRL_INV3EN)

/*! @brief Set the INV3EN field to a new value. */
#define BW_FTM_INVCTRL_INV3EN(x, v) (BITBAND_ACCESS32(HW_FTM_INVCTRL_ADDR(x), BP_FTM_INVCTRL_INV3EN) = (v))
/*@}*/

/*******************************************************************************
 * HW_FTM_SWOCTRL - FTM Software Output Control
 ******************************************************************************/

/*!
 * @brief HW_FTM_SWOCTRL - FTM Software Output Control (RW)
 *
 * Reset value: 0x00000000U
 *
 * This register enables software control of channel (n) output and defines the
 * value forced to the channel (n) output: The CHnOC bits enable the control of
 * the corresponding channel (n) output by software. The CHnOCV bits select the
 * value that is forced at the corresponding channel (n) output. This register has
 * a write buffer. The fields are updated by the SWOCTRL register synchronization.
 */
typedef union _hw_ftm_swoctrl
{
    uint32_t U;
    struct _hw_ftm_swoctrl_bitfields
    {
        uint32_t CH0OC : 1;            /*!< [0] Channel 0 Software Output Control Enable
                                        * */
        uint32_t CH1OC : 1;            /*!< [1] Channel 1 Software Output Control Enable
                                        * */
        uint32_t CH2OC : 1;            /*!< [2] Channel 2 Software Output Control Enable
                                        * */
        uint32_t CH3OC : 1;            /*!< [3] Channel 3 Software Output Control Enable
                                        * */
        uint32_t CH4OC : 1;            /*!< [4] Channel 4 Software Output Control Enable
                                        * */
        uint32_t CH5OC : 1;            /*!< [5] Channel 5 Software Output Control Enable
                                        * */
        uint32_t CH6OC : 1;            /*!< [6] Channel 6 Software Output Control Enable
                                        * */
        uint32_t CH7OC : 1;            /*!< [7] Channel 7 Software Output Control Enable
                                        * */
        uint32_t CH0OCV : 1;           /*!< [8] Channel 0 Software Output Control Value
                                        * */
        uint32_t CH1OCV : 1;           /*!< [9] Channel 1 Software Output Control Value
                                        * */
        uint32_t CH2OCV : 1;           /*!< [10] Channel 2 Software Output Control
                                        * Value */
        uint32_t CH3OCV : 1;           /*!< [11] Channel 3 Software Output Control
                                        * Value */
        uint32_t CH4OCV : 1;           /*!< [12] Channel 4 Software Output Control
                                        * Value */
        uint32_t CH5OCV : 1;           /*!< [13] Channel 5 Software Output Control
                                        * Value */
        uint32_t CH6OCV : 1;           /*!< [14] Channel 6 Software Output Control
                                        * Value */
        uint32_t CH7OCV : 1;           /*!< [15] Channel 7 Software Output Control
                                        * Value */
        uint32_t RESERVED0 : 16;       /*!< [31:16]  */
    } B;
} hw_ftm_swoctrl_t;

/*!
 * @name Constants and macros for entire FTM_SWOCTRL register
 */
/*@{*/
#define HW_FTM_SWOCTRL_ADDR(x)   ((x) + 0x94U)

#define HW_FTM_SWOCTRL(x)        (*(__IO hw_ftm_swoctrl_t *) HW_FTM_SWOCTRL_ADDR(x))
#define HW_FTM_SWOCTRL_RD(x)     (HW_FTM_SWOCTRL(x).U)
#define HW_FTM_SWOCTRL_WR(x, v)  (HW_FTM_SWOCTRL(x).U = (v))
#define HW_FTM_SWOCTRL_SET(x, v) (HW_FTM_SWOCTRL_WR(x, HW_FTM_SWOCTRL_RD(x) |  (v)))
#define HW_FTM_SWOCTRL_CLR(x, v) (HW_FTM_SWOCTRL_WR(x, HW_FTM_SWOCTRL_RD(x) & ~(v)))
#define HW_FTM_SWOCTRL_TOG(x, v) (HW_FTM_SWOCTRL_WR(x, HW_FTM_SWOCTRL_RD(x) ^  (v)))
/*@}*/

/*
 * Constants & macros for individual FTM_SWOCTRL bitfields
 */

/*!
 * @name Register FTM_SWOCTRL, field CH0OC[0] (RW)
 *
 * Values:
 * - 0 - The channel output is not affected by software output control.
 * - 1 - The channel output is affected by software output control.
 */
/*@{*/
#define BP_FTM_SWOCTRL_CH0OC (0U)          /*!< Bit position for FTM_SWOCTRL_CH0OC. */
#define BM_FTM_SWOCTRL_CH0OC (0x00000001U) /*!< Bit mask for FTM_SWOCTRL_CH0OC. */
#define BS_FTM_SWOCTRL_CH0OC (1U)          /*!< Bit field size in bits for FTM_SWOCTRL_CH0OC. */

/*! @brief Read current value of the FTM_SWOCTRL_CH0OC field. */
#define BR_FTM_SWOCTRL_CH0OC(x) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH0OC))

/*! @brief Format value for bitfield FTM_SWOCTRL_CH0OC. */
#define BF_FTM_SWOCTRL_CH0OC(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SWOCTRL_CH0OC) & BM_FTM_SWOCTRL_CH0OC)

/*! @brief Set the CH0OC field to a new value. */
#define BW_FTM_SWOCTRL_CH0OC(x, v) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH0OC) = (v))
/*@}*/

/*!
 * @name Register FTM_SWOCTRL, field CH1OC[1] (RW)
 *
 * Values:
 * - 0 - The channel output is not affected by software output control.
 * - 1 - The channel output is affected by software output control.
 */
/*@{*/
#define BP_FTM_SWOCTRL_CH1OC (1U)          /*!< Bit position for FTM_SWOCTRL_CH1OC. */
#define BM_FTM_SWOCTRL_CH1OC (0x00000002U) /*!< Bit mask for FTM_SWOCTRL_CH1OC. */
#define BS_FTM_SWOCTRL_CH1OC (1U)          /*!< Bit field size in bits for FTM_SWOCTRL_CH1OC. */

/*! @brief Read current value of the FTM_SWOCTRL_CH1OC field. */
#define BR_FTM_SWOCTRL_CH1OC(x) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH1OC))

/*! @brief Format value for bitfield FTM_SWOCTRL_CH1OC. */
#define BF_FTM_SWOCTRL_CH1OC(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SWOCTRL_CH1OC) & BM_FTM_SWOCTRL_CH1OC)

/*! @brief Set the CH1OC field to a new value. */
#define BW_FTM_SWOCTRL_CH1OC(x, v) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH1OC) = (v))
/*@}*/

/*!
 * @name Register FTM_SWOCTRL, field CH2OC[2] (RW)
 *
 * Values:
 * - 0 - The channel output is not affected by software output control.
 * - 1 - The channel output is affected by software output control.
 */
/*@{*/
#define BP_FTM_SWOCTRL_CH2OC (2U)          /*!< Bit position for FTM_SWOCTRL_CH2OC. */
#define BM_FTM_SWOCTRL_CH2OC (0x00000004U) /*!< Bit mask for FTM_SWOCTRL_CH2OC. */
#define BS_FTM_SWOCTRL_CH2OC (1U)          /*!< Bit field size in bits for FTM_SWOCTRL_CH2OC. */

/*! @brief Read current value of the FTM_SWOCTRL_CH2OC field. */
#define BR_FTM_SWOCTRL_CH2OC(x) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH2OC))

/*! @brief Format value for bitfield FTM_SWOCTRL_CH2OC. */
#define BF_FTM_SWOCTRL_CH2OC(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SWOCTRL_CH2OC) & BM_FTM_SWOCTRL_CH2OC)

/*! @brief Set the CH2OC field to a new value. */
#define BW_FTM_SWOCTRL_CH2OC(x, v) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH2OC) = (v))
/*@}*/

/*!
 * @name Register FTM_SWOCTRL, field CH3OC[3] (RW)
 *
 * Values:
 * - 0 - The channel output is not affected by software output control.
 * - 1 - The channel output is affected by software output control.
 */
/*@{*/
#define BP_FTM_SWOCTRL_CH3OC (3U)          /*!< Bit position for FTM_SWOCTRL_CH3OC. */
#define BM_FTM_SWOCTRL_CH3OC (0x00000008U) /*!< Bit mask for FTM_SWOCTRL_CH3OC. */
#define BS_FTM_SWOCTRL_CH3OC (1U)          /*!< Bit field size in bits for FTM_SWOCTRL_CH3OC. */

/*! @brief Read current value of the FTM_SWOCTRL_CH3OC field. */
#define BR_FTM_SWOCTRL_CH3OC(x) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH3OC))

/*! @brief Format value for bitfield FTM_SWOCTRL_CH3OC. */
#define BF_FTM_SWOCTRL_CH3OC(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SWOCTRL_CH3OC) & BM_FTM_SWOCTRL_CH3OC)

/*! @brief Set the CH3OC field to a new value. */
#define BW_FTM_SWOCTRL_CH3OC(x, v) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH3OC) = (v))
/*@}*/

/*!
 * @name Register FTM_SWOCTRL, field CH4OC[4] (RW)
 *
 * Values:
 * - 0 - The channel output is not affected by software output control.
 * - 1 - The channel output is affected by software output control.
 */
/*@{*/
#define BP_FTM_SWOCTRL_CH4OC (4U)          /*!< Bit position for FTM_SWOCTRL_CH4OC. */
#define BM_FTM_SWOCTRL_CH4OC (0x00000010U) /*!< Bit mask for FTM_SWOCTRL_CH4OC. */
#define BS_FTM_SWOCTRL_CH4OC (1U)          /*!< Bit field size in bits for FTM_SWOCTRL_CH4OC. */

/*! @brief Read current value of the FTM_SWOCTRL_CH4OC field. */
#define BR_FTM_SWOCTRL_CH4OC(x) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH4OC))

/*! @brief Format value for bitfield FTM_SWOCTRL_CH4OC. */
#define BF_FTM_SWOCTRL_CH4OC(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SWOCTRL_CH4OC) & BM_FTM_SWOCTRL_CH4OC)

/*! @brief Set the CH4OC field to a new value. */
#define BW_FTM_SWOCTRL_CH4OC(x, v) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH4OC) = (v))
/*@}*/

/*!
 * @name Register FTM_SWOCTRL, field CH5OC[5] (RW)
 *
 * Values:
 * - 0 - The channel output is not affected by software output control.
 * - 1 - The channel output is affected by software output control.
 */
/*@{*/
#define BP_FTM_SWOCTRL_CH5OC (5U)          /*!< Bit position for FTM_SWOCTRL_CH5OC. */
#define BM_FTM_SWOCTRL_CH5OC (0x00000020U) /*!< Bit mask for FTM_SWOCTRL_CH5OC. */
#define BS_FTM_SWOCTRL_CH5OC (1U)          /*!< Bit field size in bits for FTM_SWOCTRL_CH5OC. */

/*! @brief Read current value of the FTM_SWOCTRL_CH5OC field. */
#define BR_FTM_SWOCTRL_CH5OC(x) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH5OC))

/*! @brief Format value for bitfield FTM_SWOCTRL_CH5OC. */
#define BF_FTM_SWOCTRL_CH5OC(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SWOCTRL_CH5OC) & BM_FTM_SWOCTRL_CH5OC)

/*! @brief Set the CH5OC field to a new value. */
#define BW_FTM_SWOCTRL_CH5OC(x, v) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH5OC) = (v))
/*@}*/

/*!
 * @name Register FTM_SWOCTRL, field CH6OC[6] (RW)
 *
 * Values:
 * - 0 - The channel output is not affected by software output control.
 * - 1 - The channel output is affected by software output control.
 */
/*@{*/
#define BP_FTM_SWOCTRL_CH6OC (6U)          /*!< Bit position for FTM_SWOCTRL_CH6OC. */
#define BM_FTM_SWOCTRL_CH6OC (0x00000040U) /*!< Bit mask for FTM_SWOCTRL_CH6OC. */
#define BS_FTM_SWOCTRL_CH6OC (1U)          /*!< Bit field size in bits for FTM_SWOCTRL_CH6OC. */

/*! @brief Read current value of the FTM_SWOCTRL_CH6OC field. */
#define BR_FTM_SWOCTRL_CH6OC(x) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH6OC))

/*! @brief Format value for bitfield FTM_SWOCTRL_CH6OC. */
#define BF_FTM_SWOCTRL_CH6OC(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SWOCTRL_CH6OC) & BM_FTM_SWOCTRL_CH6OC)

/*! @brief Set the CH6OC field to a new value. */
#define BW_FTM_SWOCTRL_CH6OC(x, v) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH6OC) = (v))
/*@}*/

/*!
 * @name Register FTM_SWOCTRL, field CH7OC[7] (RW)
 *
 * Values:
 * - 0 - The channel output is not affected by software output control.
 * - 1 - The channel output is affected by software output control.
 */
/*@{*/
#define BP_FTM_SWOCTRL_CH7OC (7U)          /*!< Bit position for FTM_SWOCTRL_CH7OC. */
#define BM_FTM_SWOCTRL_CH7OC (0x00000080U) /*!< Bit mask for FTM_SWOCTRL_CH7OC. */
#define BS_FTM_SWOCTRL_CH7OC (1U)          /*!< Bit field size in bits for FTM_SWOCTRL_CH7OC. */

/*! @brief Read current value of the FTM_SWOCTRL_CH7OC field. */
#define BR_FTM_SWOCTRL_CH7OC(x) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH7OC))

/*! @brief Format value for bitfield FTM_SWOCTRL_CH7OC. */
#define BF_FTM_SWOCTRL_CH7OC(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SWOCTRL_CH7OC) & BM_FTM_SWOCTRL_CH7OC)

/*! @brief Set the CH7OC field to a new value. */
#define BW_FTM_SWOCTRL_CH7OC(x, v) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH7OC) = (v))
/*@}*/

/*!
 * @name Register FTM_SWOCTRL, field CH0OCV[8] (RW)
 *
 * Values:
 * - 0 - The software output control forces 0 to the channel output.
 * - 1 - The software output control forces 1 to the channel output.
 */
/*@{*/
#define BP_FTM_SWOCTRL_CH0OCV (8U)         /*!< Bit position for FTM_SWOCTRL_CH0OCV. */
#define BM_FTM_SWOCTRL_CH0OCV (0x00000100U) /*!< Bit mask for FTM_SWOCTRL_CH0OCV. */
#define BS_FTM_SWOCTRL_CH0OCV (1U)         /*!< Bit field size in bits for FTM_SWOCTRL_CH0OCV. */

/*! @brief Read current value of the FTM_SWOCTRL_CH0OCV field. */
#define BR_FTM_SWOCTRL_CH0OCV(x) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH0OCV))

/*! @brief Format value for bitfield FTM_SWOCTRL_CH0OCV. */
#define BF_FTM_SWOCTRL_CH0OCV(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SWOCTRL_CH0OCV) & BM_FTM_SWOCTRL_CH0OCV)

/*! @brief Set the CH0OCV field to a new value. */
#define BW_FTM_SWOCTRL_CH0OCV(x, v) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH0OCV) = (v))
/*@}*/

/*!
 * @name Register FTM_SWOCTRL, field CH1OCV[9] (RW)
 *
 * Values:
 * - 0 - The software output control forces 0 to the channel output.
 * - 1 - The software output control forces 1 to the channel output.
 */
/*@{*/
#define BP_FTM_SWOCTRL_CH1OCV (9U)         /*!< Bit position for FTM_SWOCTRL_CH1OCV. */
#define BM_FTM_SWOCTRL_CH1OCV (0x00000200U) /*!< Bit mask for FTM_SWOCTRL_CH1OCV. */
#define BS_FTM_SWOCTRL_CH1OCV (1U)         /*!< Bit field size in bits for FTM_SWOCTRL_CH1OCV. */

/*! @brief Read current value of the FTM_SWOCTRL_CH1OCV field. */
#define BR_FTM_SWOCTRL_CH1OCV(x) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH1OCV))

/*! @brief Format value for bitfield FTM_SWOCTRL_CH1OCV. */
#define BF_FTM_SWOCTRL_CH1OCV(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SWOCTRL_CH1OCV) & BM_FTM_SWOCTRL_CH1OCV)

/*! @brief Set the CH1OCV field to a new value. */
#define BW_FTM_SWOCTRL_CH1OCV(x, v) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH1OCV) = (v))
/*@}*/

/*!
 * @name Register FTM_SWOCTRL, field CH2OCV[10] (RW)
 *
 * Values:
 * - 0 - The software output control forces 0 to the channel output.
 * - 1 - The software output control forces 1 to the channel output.
 */
/*@{*/
#define BP_FTM_SWOCTRL_CH2OCV (10U)        /*!< Bit position for FTM_SWOCTRL_CH2OCV. */
#define BM_FTM_SWOCTRL_CH2OCV (0x00000400U) /*!< Bit mask for FTM_SWOCTRL_CH2OCV. */
#define BS_FTM_SWOCTRL_CH2OCV (1U)         /*!< Bit field size in bits for FTM_SWOCTRL_CH2OCV. */

/*! @brief Read current value of the FTM_SWOCTRL_CH2OCV field. */
#define BR_FTM_SWOCTRL_CH2OCV(x) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH2OCV))

/*! @brief Format value for bitfield FTM_SWOCTRL_CH2OCV. */
#define BF_FTM_SWOCTRL_CH2OCV(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SWOCTRL_CH2OCV) & BM_FTM_SWOCTRL_CH2OCV)

/*! @brief Set the CH2OCV field to a new value. */
#define BW_FTM_SWOCTRL_CH2OCV(x, v) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH2OCV) = (v))
/*@}*/

/*!
 * @name Register FTM_SWOCTRL, field CH3OCV[11] (RW)
 *
 * Values:
 * - 0 - The software output control forces 0 to the channel output.
 * - 1 - The software output control forces 1 to the channel output.
 */
/*@{*/
#define BP_FTM_SWOCTRL_CH3OCV (11U)        /*!< Bit position for FTM_SWOCTRL_CH3OCV. */
#define BM_FTM_SWOCTRL_CH3OCV (0x00000800U) /*!< Bit mask for FTM_SWOCTRL_CH3OCV. */
#define BS_FTM_SWOCTRL_CH3OCV (1U)         /*!< Bit field size in bits for FTM_SWOCTRL_CH3OCV. */

/*! @brief Read current value of the FTM_SWOCTRL_CH3OCV field. */
#define BR_FTM_SWOCTRL_CH3OCV(x) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH3OCV))

/*! @brief Format value for bitfield FTM_SWOCTRL_CH3OCV. */
#define BF_FTM_SWOCTRL_CH3OCV(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SWOCTRL_CH3OCV) & BM_FTM_SWOCTRL_CH3OCV)

/*! @brief Set the CH3OCV field to a new value. */
#define BW_FTM_SWOCTRL_CH3OCV(x, v) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH3OCV) = (v))
/*@}*/

/*!
 * @name Register FTM_SWOCTRL, field CH4OCV[12] (RW)
 *
 * Values:
 * - 0 - The software output control forces 0 to the channel output.
 * - 1 - The software output control forces 1 to the channel output.
 */
/*@{*/
#define BP_FTM_SWOCTRL_CH4OCV (12U)        /*!< Bit position for FTM_SWOCTRL_CH4OCV. */
#define BM_FTM_SWOCTRL_CH4OCV (0x00001000U) /*!< Bit mask for FTM_SWOCTRL_CH4OCV. */
#define BS_FTM_SWOCTRL_CH4OCV (1U)         /*!< Bit field size in bits for FTM_SWOCTRL_CH4OCV. */

/*! @brief Read current value of the FTM_SWOCTRL_CH4OCV field. */
#define BR_FTM_SWOCTRL_CH4OCV(x) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH4OCV))

/*! @brief Format value for bitfield FTM_SWOCTRL_CH4OCV. */
#define BF_FTM_SWOCTRL_CH4OCV(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SWOCTRL_CH4OCV) & BM_FTM_SWOCTRL_CH4OCV)

/*! @brief Set the CH4OCV field to a new value. */
#define BW_FTM_SWOCTRL_CH4OCV(x, v) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH4OCV) = (v))
/*@}*/

/*!
 * @name Register FTM_SWOCTRL, field CH5OCV[13] (RW)
 *
 * Values:
 * - 0 - The software output control forces 0 to the channel output.
 * - 1 - The software output control forces 1 to the channel output.
 */
/*@{*/
#define BP_FTM_SWOCTRL_CH5OCV (13U)        /*!< Bit position for FTM_SWOCTRL_CH5OCV. */
#define BM_FTM_SWOCTRL_CH5OCV (0x00002000U) /*!< Bit mask for FTM_SWOCTRL_CH5OCV. */
#define BS_FTM_SWOCTRL_CH5OCV (1U)         /*!< Bit field size in bits for FTM_SWOCTRL_CH5OCV. */

/*! @brief Read current value of the FTM_SWOCTRL_CH5OCV field. */
#define BR_FTM_SWOCTRL_CH5OCV(x) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH5OCV))

/*! @brief Format value for bitfield FTM_SWOCTRL_CH5OCV. */
#define BF_FTM_SWOCTRL_CH5OCV(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SWOCTRL_CH5OCV) & BM_FTM_SWOCTRL_CH5OCV)

/*! @brief Set the CH5OCV field to a new value. */
#define BW_FTM_SWOCTRL_CH5OCV(x, v) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH5OCV) = (v))
/*@}*/

/*!
 * @name Register FTM_SWOCTRL, field CH6OCV[14] (RW)
 *
 * Values:
 * - 0 - The software output control forces 0 to the channel output.
 * - 1 - The software output control forces 1 to the channel output.
 */
/*@{*/
#define BP_FTM_SWOCTRL_CH6OCV (14U)        /*!< Bit position for FTM_SWOCTRL_CH6OCV. */
#define BM_FTM_SWOCTRL_CH6OCV (0x00004000U) /*!< Bit mask for FTM_SWOCTRL_CH6OCV. */
#define BS_FTM_SWOCTRL_CH6OCV (1U)         /*!< Bit field size in bits for FTM_SWOCTRL_CH6OCV. */

/*! @brief Read current value of the FTM_SWOCTRL_CH6OCV field. */
#define BR_FTM_SWOCTRL_CH6OCV(x) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH6OCV))

/*! @brief Format value for bitfield FTM_SWOCTRL_CH6OCV. */
#define BF_FTM_SWOCTRL_CH6OCV(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SWOCTRL_CH6OCV) & BM_FTM_SWOCTRL_CH6OCV)

/*! @brief Set the CH6OCV field to a new value. */
#define BW_FTM_SWOCTRL_CH6OCV(x, v) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH6OCV) = (v))
/*@}*/

/*!
 * @name Register FTM_SWOCTRL, field CH7OCV[15] (RW)
 *
 * Values:
 * - 0 - The software output control forces 0 to the channel output.
 * - 1 - The software output control forces 1 to the channel output.
 */
/*@{*/
#define BP_FTM_SWOCTRL_CH7OCV (15U)        /*!< Bit position for FTM_SWOCTRL_CH7OCV. */
#define BM_FTM_SWOCTRL_CH7OCV (0x00008000U) /*!< Bit mask for FTM_SWOCTRL_CH7OCV. */
#define BS_FTM_SWOCTRL_CH7OCV (1U)         /*!< Bit field size in bits for FTM_SWOCTRL_CH7OCV. */

/*! @brief Read current value of the FTM_SWOCTRL_CH7OCV field. */
#define BR_FTM_SWOCTRL_CH7OCV(x) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH7OCV))

/*! @brief Format value for bitfield FTM_SWOCTRL_CH7OCV. */
#define BF_FTM_SWOCTRL_CH7OCV(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SWOCTRL_CH7OCV) & BM_FTM_SWOCTRL_CH7OCV)

/*! @brief Set the CH7OCV field to a new value. */
#define BW_FTM_SWOCTRL_CH7OCV(x, v) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH7OCV) = (v))
/*@}*/

/*******************************************************************************
 * HW_FTM_PWMLOAD - FTM PWM Load
 ******************************************************************************/

/*!
 * @brief HW_FTM_PWMLOAD - FTM PWM Load (RW)
 *
 * Reset value: 0x00000000U
 *
 * Enables the loading of the MOD, CNTIN, C(n)V, and C(n+1)V registers with the
 * values of their write buffers when the FTM counter changes from the MOD
 * register value to its next value or when a channel (j) match occurs. A match occurs
 * for the channel (j) when FTM counter = C(j)V.
 */
typedef union _hw_ftm_pwmload
{
    uint32_t U;
    struct _hw_ftm_pwmload_bitfields
    {
        uint32_t CH0SEL : 1;           /*!< [0] Channel 0 Select */
        uint32_t CH1SEL : 1;           /*!< [1] Channel 1 Select */
        uint32_t CH2SEL : 1;           /*!< [2] Channel 2 Select */
        uint32_t CH3SEL : 1;           /*!< [3] Channel 3 Select */
        uint32_t CH4SEL : 1;           /*!< [4] Channel 4 Select */
        uint32_t CH5SEL : 1;           /*!< [5] Channel 5 Select */
        uint32_t CH6SEL : 1;           /*!< [6] Channel 6 Select */
        uint32_t CH7SEL : 1;           /*!< [7] Channel 7 Select */
        uint32_t RESERVED0 : 1;        /*!< [8]  */
        uint32_t LDOK : 1;             /*!< [9] Load Enable */
        uint32_t RESERVED1 : 22;       /*!< [31:10]  */
    } B;
} hw_ftm_pwmload_t;

/*!
 * @name Constants and macros for entire FTM_PWMLOAD register
 */
/*@{*/
#define HW_FTM_PWMLOAD_ADDR(x)   ((x) + 0x98U)

#define HW_FTM_PWMLOAD(x)        (*(__IO hw_ftm_pwmload_t *) HW_FTM_PWMLOAD_ADDR(x))
#define HW_FTM_PWMLOAD_RD(x)     (HW_FTM_PWMLOAD(x).U)
#define HW_FTM_PWMLOAD_WR(x, v)  (HW_FTM_PWMLOAD(x).U = (v))
#define HW_FTM_PWMLOAD_SET(x, v) (HW_FTM_PWMLOAD_WR(x, HW_FTM_PWMLOAD_RD(x) |  (v)))
#define HW_FTM_PWMLOAD_CLR(x, v) (HW_FTM_PWMLOAD_WR(x, HW_FTM_PWMLOAD_RD(x) & ~(v)))
#define HW_FTM_PWMLOAD_TOG(x, v) (HW_FTM_PWMLOAD_WR(x, HW_FTM_PWMLOAD_RD(x) ^  (v)))
/*@}*/

/*
 * Constants & macros for individual FTM_PWMLOAD bitfields
 */

/*!
 * @name Register FTM_PWMLOAD, field CH0SEL[0] (RW)
 *
 * Values:
 * - 0 - Do not include the channel in the matching process.
 * - 1 - Include the channel in the matching process.
 */
/*@{*/
#define BP_FTM_PWMLOAD_CH0SEL (0U)         /*!< Bit position for FTM_PWMLOAD_CH0SEL. */
#define BM_FTM_PWMLOAD_CH0SEL (0x00000001U) /*!< Bit mask for FTM_PWMLOAD_CH0SEL. */
#define BS_FTM_PWMLOAD_CH0SEL (1U)         /*!< Bit field size in bits for FTM_PWMLOAD_CH0SEL. */

/*! @brief Read current value of the FTM_PWMLOAD_CH0SEL field. */
#define BR_FTM_PWMLOAD_CH0SEL(x) (BITBAND_ACCESS32(HW_FTM_PWMLOAD_ADDR(x), BP_FTM_PWMLOAD_CH0SEL))

/*! @brief Format value for bitfield FTM_PWMLOAD_CH0SEL. */
#define BF_FTM_PWMLOAD_CH0SEL(v) ((uint32_t)((uint32_t)(v) << BP_FTM_PWMLOAD_CH0SEL) & BM_FTM_PWMLOAD_CH0SEL)

/*! @brief Set the CH0SEL field to a new value. */
#define BW_FTM_PWMLOAD_CH0SEL(x, v) (BITBAND_ACCESS32(HW_FTM_PWMLOAD_ADDR(x), BP_FTM_PWMLOAD_CH0SEL) = (v))
/*@}*/

/*!
 * @name Register FTM_PWMLOAD, field CH1SEL[1] (RW)
 *
 * Values:
 * - 0 - Do not include the channel in the matching process.
 * - 1 - Include the channel in the matching process.
 */
/*@{*/
#define BP_FTM_PWMLOAD_CH1SEL (1U)         /*!< Bit position for FTM_PWMLOAD_CH1SEL. */
#define BM_FTM_PWMLOAD_CH1SEL (0x00000002U) /*!< Bit mask for FTM_PWMLOAD_CH1SEL. */
#define BS_FTM_PWMLOAD_CH1SEL (1U)         /*!< Bit field size in bits for FTM_PWMLOAD_CH1SEL. */

/*! @brief Read current value of the FTM_PWMLOAD_CH1SEL field. */
#define BR_FTM_PWMLOAD_CH1SEL(x) (BITBAND_ACCESS32(HW_FTM_PWMLOAD_ADDR(x), BP_FTM_PWMLOAD_CH1SEL))

/*! @brief Format value for bitfield FTM_PWMLOAD_CH1SEL. */
#define BF_FTM_PWMLOAD_CH1SEL(v) ((uint32_t)((uint32_t)(v) << BP_FTM_PWMLOAD_CH1SEL) & BM_FTM_PWMLOAD_CH1SEL)

/*! @brief Set the CH1SEL field to a new value. */
#define BW_FTM_PWMLOAD_CH1SEL(x, v) (BITBAND_ACCESS32(HW_FTM_PWMLOAD_ADDR(x), BP_FTM_PWMLOAD_CH1SEL) = (v))
/*@}*/

/*!
 * @name Register FTM_PWMLOAD, field CH2SEL[2] (RW)
 *
 * Values:
 * - 0 - Do not include the channel in the matching process.
 * - 1 - Include the channel in the matching process.
 */
/*@{*/
#define BP_FTM_PWMLOAD_CH2SEL (2U)         /*!< Bit position for FTM_PWMLOAD_CH2SEL. */
#define BM_FTM_PWMLOAD_CH2SEL (0x00000004U) /*!< Bit mask for FTM_PWMLOAD_CH2SEL. */
#define BS_FTM_PWMLOAD_CH2SEL (1U)         /*!< Bit field size in bits for FTM_PWMLOAD_CH2SEL. */

/*! @brief Read current value of the FTM_PWMLOAD_CH2SEL field. */
#define BR_FTM_PWMLOAD_CH2SEL(x) (BITBAND_ACCESS32(HW_FTM_PWMLOAD_ADDR(x), BP_FTM_PWMLOAD_CH2SEL))

/*! @brief Format value for bitfield FTM_PWMLOAD_CH2SEL. */
#define BF_FTM_PWMLOAD_CH2SEL(v) ((uint32_t)((uint32_t)(v) << BP_FTM_PWMLOAD_CH2SEL) & BM_FTM_PWMLOAD_CH2SEL)

/*! @brief Set the CH2SEL field to a new value. */
#define BW_FTM_PWMLOAD_CH2SEL(x, v) (BITBAND_ACCESS32(HW_FTM_PWMLOAD_ADDR(x), BP_FTM_PWMLOAD_CH2SEL) = (v))
/*@}*/

/*!
 * @name Register FTM_PWMLOAD, field CH3SEL[3] (RW)
 *
 * Values:
 * - 0 - Do not include the channel in the matching process.
 * - 1 - Include the channel in the matching process.
 */
/*@{*/
#define BP_FTM_PWMLOAD_CH3SEL (3U)         /*!< Bit position for FTM_PWMLOAD_CH3SEL. */
#define BM_FTM_PWMLOAD_CH3SEL (0x00000008U) /*!< Bit mask for FTM_PWMLOAD_CH3SEL. */
#define BS_FTM_PWMLOAD_CH3SEL (1U)         /*!< Bit field size in bits for FTM_PWMLOAD_CH3SEL. */

/*! @brief Read current value of the FTM_PWMLOAD_CH3SEL field. */
#define BR_FTM_PWMLOAD_CH3SEL(x) (BITBAND_ACCESS32(HW_FTM_PWMLOAD_ADDR(x), BP_FTM_PWMLOAD_CH3SEL))

/*! @brief Format value for bitfield FTM_PWMLOAD_CH3SEL. */
#define BF_FTM_PWMLOAD_CH3SEL(v) ((uint32_t)((uint32_t)(v) << BP_FTM_PWMLOAD_CH3SEL) & BM_FTM_PWMLOAD_CH3SEL)

/*! @brief Set the CH3SEL field to a new value. */
#define BW_FTM_PWMLOAD_CH3SEL(x, v) (BITBAND_ACCESS32(HW_FTM_PWMLOAD_ADDR(x), BP_FTM_PWMLOAD_CH3SEL) = (v))
/*@}*/

/*!
 * @name Register FTM_PWMLOAD, field CH4SEL[4] (RW)
 *
 * Values:
 * - 0 - Do not include the channel in the matching process.
 * - 1 - Include the channel in the matching process.
 */
/*@{*/
#define BP_FTM_PWMLOAD_CH4SEL (4U)         /*!< Bit position for FTM_PWMLOAD_CH4SEL. */
#define BM_FTM_PWMLOAD_CH4SEL (0x00000010U) /*!< Bit mask for FTM_PWMLOAD_CH4SEL. */
#define BS_FTM_PWMLOAD_CH4SEL (1U)         /*!< Bit field size in bits for FTM_PWMLOAD_CH4SEL. */

/*! @brief Read current value of the FTM_PWMLOAD_CH4SEL field. */
#define BR_FTM_PWMLOAD_CH4SEL(x) (BITBAND_ACCESS32(HW_FTM_PWMLOAD_ADDR(x), BP_FTM_PWMLOAD_CH4SEL))

/*! @brief Format value for bitfield FTM_PWMLOAD_CH4SEL. */
#define BF_FTM_PWMLOAD_CH4SEL(v) ((uint32_t)((uint32_t)(v) << BP_FTM_PWMLOAD_CH4SEL) & BM_FTM_PWMLOAD_CH4SEL)

/*! @brief Set the CH4SEL field to a new value. */
#define BW_FTM_PWMLOAD_CH4SEL(x, v) (BITBAND_ACCESS32(HW_FTM_PWMLOAD_ADDR(x), BP_FTM_PWMLOAD_CH4SEL) = (v))
/*@}*/

/*!
 * @name Register FTM_PWMLOAD, field CH5SEL[5] (RW)
 *
 * Values:
 * - 0 - Do not include the channel in the matching process.
 * - 1 - Include the channel in the matching process.
 */
/*@{*/
#define BP_FTM_PWMLOAD_CH5SEL (5U)         /*!< Bit position for FTM_PWMLOAD_CH5SEL. */
#define BM_FTM_PWMLOAD_CH5SEL (0x00000020U) /*!< Bit mask for FTM_PWMLOAD_CH5SEL. */
#define BS_FTM_PWMLOAD_CH5SEL (1U)         /*!< Bit field size in bits for FTM_PWMLOAD_CH5SEL. */

/*! @brief Read current value of the FTM_PWMLOAD_CH5SEL field. */
#define BR_FTM_PWMLOAD_CH5SEL(x) (BITBAND_ACCESS32(HW_FTM_PWMLOAD_ADDR(x), BP_FTM_PWMLOAD_CH5SEL))

/*! @brief Format value for bitfield FTM_PWMLOAD_CH5SEL. */
#define BF_FTM_PWMLOAD_CH5SEL(v) ((uint32_t)((uint32_t)(v) << BP_FTM_PWMLOAD_CH5SEL) & BM_FTM_PWMLOAD_CH5SEL)

/*! @brief Set the CH5SEL field to a new value. */
#define BW_FTM_PWMLOAD_CH5SEL(x, v) (BITBAND_ACCESS32(HW_FTM_PWMLOAD_ADDR(x), BP_FTM_PWMLOAD_CH5SEL) = (v))
/*@}*/

/*!
 * @name Register FTM_PWMLOAD, field CH6SEL[6] (RW)
 *
 * Values:
 * - 0 - Do not include the channel in the matching process.
 * - 1 - Include the channel in the matching process.
 */
/*@{*/
#define BP_FTM_PWMLOAD_CH6SEL (6U)         /*!< Bit position for FTM_PWMLOAD_CH6SEL. */
#define BM_FTM_PWMLOAD_CH6SEL (0x00000040U) /*!< Bit mask for FTM_PWMLOAD_CH6SEL. */
#define BS_FTM_PWMLOAD_CH6SEL (1U)         /*!< Bit field size in bits for FTM_PWMLOAD_CH6SEL. */

/*! @brief Read current value of the FTM_PWMLOAD_CH6SEL field. */
#define BR_FTM_PWMLOAD_CH6SEL(x) (BITBAND_ACCESS32(HW_FTM_PWMLOAD_ADDR(x), BP_FTM_PWMLOAD_CH6SEL))

/*! @brief Format value for bitfield FTM_PWMLOAD_CH6SEL. */
#define BF_FTM_PWMLOAD_CH6SEL(v) ((uint32_t)((uint32_t)(v) << BP_FTM_PWMLOAD_CH6SEL) & BM_FTM_PWMLOAD_CH6SEL)

/*! @brief Set the CH6SEL field to a new value. */
#define BW_FTM_PWMLOAD_CH6SEL(x, v) (BITBAND_ACCESS32(HW_FTM_PWMLOAD_ADDR(x), BP_FTM_PWMLOAD_CH6SEL) = (v))
/*@}*/

/*!
 * @name Register FTM_PWMLOAD, field CH7SEL[7] (RW)
 *
 * Values:
 * - 0 - Do not include the channel in the matching process.
 * - 1 - Include the channel in the matching process.
 */
/*@{*/
#define BP_FTM_PWMLOAD_CH7SEL (7U)         /*!< Bit position for FTM_PWMLOAD_CH7SEL. */
#define BM_FTM_PWMLOAD_CH7SEL (0x00000080U) /*!< Bit mask for FTM_PWMLOAD_CH7SEL. */
#define BS_FTM_PWMLOAD_CH7SEL (1U)         /*!< Bit field size in bits for FTM_PWMLOAD_CH7SEL. */

/*! @brief Read current value of the FTM_PWMLOAD_CH7SEL field. */
#define BR_FTM_PWMLOAD_CH7SEL(x) (BITBAND_ACCESS32(HW_FTM_PWMLOAD_ADDR(x), BP_FTM_PWMLOAD_CH7SEL))

/*! @brief Format value for bitfield FTM_PWMLOAD_CH7SEL. */
#define BF_FTM_PWMLOAD_CH7SEL(v) ((uint32_t)((uint32_t)(v) << BP_FTM_PWMLOAD_CH7SEL) & BM_FTM_PWMLOAD_CH7SEL)

/*! @brief Set the CH7SEL field to a new value. */
#define BW_FTM_PWMLOAD_CH7SEL(x, v) (BITBAND_ACCESS32(HW_FTM_PWMLOAD_ADDR(x), BP_FTM_PWMLOAD_CH7SEL) = (v))
/*@}*/

/*!
 * @name Register FTM_PWMLOAD, field LDOK[9] (RW)
 *
 * Enables the loading of the MOD, CNTIN, and CV registers with the values of
 * their write buffers.
 *
 * Values:
 * - 0 - Loading updated values is disabled.
 * - 1 - Loading updated values is enabled.
 */
/*@{*/
#define BP_FTM_PWMLOAD_LDOK  (9U)          /*!< Bit position for FTM_PWMLOAD_LDOK. */
#define BM_FTM_PWMLOAD_LDOK  (0x00000200U) /*!< Bit mask for FTM_PWMLOAD_LDOK. */
#define BS_FTM_PWMLOAD_LDOK  (1U)          /*!< Bit field size in bits for FTM_PWMLOAD_LDOK. */

/*! @brief Read current value of the FTM_PWMLOAD_LDOK field. */
#define BR_FTM_PWMLOAD_LDOK(x) (BITBAND_ACCESS32(HW_FTM_PWMLOAD_ADDR(x), BP_FTM_PWMLOAD_LDOK))

/*! @brief Format value for bitfield FTM_PWMLOAD_LDOK. */
#define BF_FTM_PWMLOAD_LDOK(v) ((uint32_t)((uint32_t)(v) << BP_FTM_PWMLOAD_LDOK) & BM_FTM_PWMLOAD_LDOK)

/*! @brief Set the LDOK field to a new value. */
#define BW_FTM_PWMLOAD_LDOK(x, v) (BITBAND_ACCESS32(HW_FTM_PWMLOAD_ADDR(x), BP_FTM_PWMLOAD_LDOK) = (v))
/*@}*/

/*******************************************************************************
 * hw_ftm_t - module struct
 ******************************************************************************/
/*!
 * @brief All FTM module registers.
 */
#pragma pack(1)
typedef struct _hw_ftm
{
    __IO hw_ftm_sc_t SC;                   /*!< [0x0] Status And Control */
    __IO hw_ftm_cnt_t CNT;                 /*!< [0x4] Counter */
    __IO hw_ftm_mod_t MOD;                 /*!< [0x8] Modulo */
    struct {
        __IO hw_ftm_cnsc_t CnSC;           /*!< [0xC] Channel (n) Status And Control */
        __IO hw_ftm_cnv_t CnV;             /*!< [0x10] Channel (n) Value */
    } CONTROLS[8];
    __IO hw_ftm_cntin_t CNTIN;             /*!< [0x4C] Counter Initial Value */
    __IO hw_ftm_status_t STATUS;           /*!< [0x50] Capture And Compare Status */
    __IO hw_ftm_mode_t MODE;               /*!< [0x54] Features Mode Selection */
    __IO hw_ftm_sync_t SYNC;               /*!< [0x58] Synchronization */
    __IO hw_ftm_outinit_t OUTINIT;         /*!< [0x5C] Initial State For Channels Output */
    __IO hw_ftm_outmask_t OUTMASK;         /*!< [0x60] Output Mask */
    __IO hw_ftm_combine_t COMBINE;         /*!< [0x64] Function For Linked Channels */
    __IO hw_ftm_deadtime_t DEADTIME;       /*!< [0x68] Deadtime Insertion Control */
    __IO hw_ftm_exttrig_t EXTTRIG;         /*!< [0x6C] FTM External Trigger */
    __IO hw_ftm_pol_t POL;                 /*!< [0x70] Channels Polarity */
    __IO hw_ftm_fms_t FMS;                 /*!< [0x74] Fault Mode Status */
    __IO hw_ftm_filter_t FILTER;           /*!< [0x78] Input Capture Filter Control */
    __IO hw_ftm_fltctrl_t FLTCTRL;         /*!< [0x7C] Fault Control */
    __IO hw_ftm_qdctrl_t QDCTRL;           /*!< [0x80] Quadrature Decoder Control And Status */
    __IO hw_ftm_conf_t CONF;               /*!< [0x84] Configuration */
    __IO hw_ftm_fltpol_t FLTPOL;           /*!< [0x88] FTM Fault Input Polarity */
    __IO hw_ftm_synconf_t SYNCONF;         /*!< [0x8C] Synchronization Configuration */
    __IO hw_ftm_invctrl_t INVCTRL;         /*!< [0x90] FTM Inverting Control */
    __IO hw_ftm_swoctrl_t SWOCTRL;         /*!< [0x94] FTM Software Output Control */
    __IO hw_ftm_pwmload_t PWMLOAD;         /*!< [0x98] FTM PWM Load */
} hw_ftm_t;
#pragma pack()

/*! @brief Macro to access all FTM registers. */
/*! @param x FTM module instance base address. */
/*! @return Reference (not a pointer) to the registers struct. To get a pointer to the struct,
 *     use the '&' operator, like <code>&HW_FTM(FTM0_BASE)</code>. */
#define HW_FTM(x)      (*(hw_ftm_t *)(x))

#endif /* __HW_FTM_REGISTERS_H__ */
/* EOF */