File content as of revision 147:a97add6d7e64:

/* 
 * Copyright (c) 2016 Nordic Semiconductor ASA
 * All rights reserved.
 * 
 * Redistribution and use in source and binary forms, with or without modification,
 * are permitted provided that the following conditions are met:
 * 
 *   1. Redistributions of source code must retain the above copyright notice, this list 
 *      of conditions and the following disclaimer.
 *
 *   2. Redistributions in binary form, except as embedded into a Nordic Semiconductor ASA 
 *      integrated circuit in a product or a software update for such product, must reproduce 
 *      the above copyright notice, this list of conditions and the following disclaimer in 
 *      the documentation and/or other materials provided with the distribution.
 *
 *   3. Neither the name of Nordic Semiconductor ASA nor the names of its contributors may be 
 *      used to endorse or promote products derived from this software without specific prior 
 *      written permission.
 *
 *   4. This software, with or without modification, must only be used with a 
 *      Nordic Semiconductor ASA integrated circuit.
 *
 *   5. Any software provided in binary or object form under this license must not be reverse 
 *      engineered, decompiled, modified and/or disassembled. 
 * 
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 * 
 */

#ifndef SDK_VALIDATION_H
#define SDK_VALIDATION_H

#include "nrf_peripherals.h"
#include "sdk_config.h"

#ifdef __cplusplus
extern "C" {
#endif

// Validate peripheral availibility

#if ((defined(SAADC_ENABLED)) && (SAADC_ENABLED > 0) && (!defined(SAADC_PRESENT)))
#error "SAADC not present in selected MCU."
#endif

#if ((defined(ADC_ENABLED)) && (ADC_ENABLED > 0) && (!defined(ADC_PRESENT)))
#error "SAADC not present in selected MCU."
#endif

#if ((defined(I2S_ENABLED)) && (I2S_ENABLED > 0) && (!defined(I2S_PRESENT)))
#error "I2S not present in selected MCU."
#endif

#if ((defined(COMP_ENABLED)) && (COMP_ENABLED > 0) && (!defined(COMP_PRESENT)))
#error "COMP not present in selected MCU."
#endif

#if ((defined(LPCOMP_ENABLED)) && (LPCOMP_ENABLED > 0) && (!defined(LPCOMP_PRESENT)))
#error "LPCOMP not present in selected MCU."
#endif

#if ((defined(SPIS0_ENABLED)) && (SPIS0_ENABLED > 0) && (!defined(SPIS_PRESENT)))
#error "SPIS0 instance not present in selected MCU."
#endif

#if ((defined(EGU_ENABLED)) && (EGU_ENABLED > 0) && (!defined(EGU_PRESENT)))
#error "EGU instance not present in selected MCU."
#endif

#if ((defined(NFC_HAL_ENABLED)) && (NFC_HAL_ENABLED > 0) && (!defined(NFCT_PRESENT)))
#error "NFC TAG not present in selected MCU."
#endif

// Validate count of instances

#if ((defined(RTC2_ENABLED)) && (RTC2_ENABLED > 0) && (RTC_COUNT < 2))
#error "RTC2 not present in selected MCU."
#endif

#if ((defined(TWIS0_ENABLED) || defined(TWIS1_ENABLED)) &&\
    ((TWIS0_ENABLED + TWIS1_ENABLED) > 0) &&\
    (!defined(TWIS_PRESENT)))
#error "TWIS not present in selected MCU."
#endif

#if ((defined(SPIS2_ENABLED)) && (SPIS2_ENABLED > 0) && (SPIS_COUNT < 2))
#error "SPI2/SPIS2 instance not present in selected MCU."
#endif

#if ((defined(TIMER3_ENABLED) || defined(TIMER4_ENABLED)) &&\
    ((TIMER3_ENABLED + TIMER4_ENABLED ) > 0) &&\
    (TIMER_COUNT < 5))
#error "TIMER3 and TIMER4 not present in selected MCU."
#endif

// Validate peripheral sharing feature
#if ((defined(PERIPHERAL_RESOURCE_SHARING_ENABLED)) && (!PERIPHERAL_RESOURCE_SHARING_ENABLED))

#if ((defined(TWIM0_ENABLED) && defined(TWIS0_ENABLED)) &&\
    ((TWIM0_ENABLED + TWIS0_ENABLED) > 1))
#error "Peripherals overlap. TWIM0, TWIS0 - only one of these can be enabled."
#endif

#if ((defined(TWIM0_ENABLED) && defined(SPIM0_ENABLED)) &&\
    ((TWIM0_ENABLED + SPIM0_ENABLED) > 1))
#error "Peripherals overlap. TWIM0, SPIM0 - only one of these can be enabled."
#endif

#if ((defined(TWIM0_ENABLED) && defined(SPIS0_ENABLED)) &&\
    ((TWIM0_ENABLED + SPIS0_ENABLED) > 1))
#error "Peripherals overlap. TWIM0, SPIS0 - only one of these can be enabled."
#endif

#if ((defined(TWIM0_ENABLED) && defined(SPI0_ENABLED)) &&\
    ((TWIM0_ENABLED + SPI0_ENABLED) > 1))
#error "Peripherals overlap. TWIM0, SPI0 - only one of these can be enabled."
#endif

#if ((defined(TWIM0_ENABLED) && defined(TWI0_ENABLED)) &&\
    ((TWIM0_ENABLED + TWI0_ENABLED) > 1))
#error "Peripherals overlap. TWIM0, TWI0 - only one of these can be enabled."
#endif

#if ((defined(TWIS0_ENABLED) && defined(SPIM0_ENABLED)) &&\
    ((TWIS0_ENABLED + SPIM0_ENABLED) > 1))
#error "Peripherals overlap. TWIS0, SPIM0 - only one of these can be enabled."
#endif

#if ((defined(TWIS0_ENABLED) && defined(SPIS0_ENABLED)) &&\
    ((TWIS0_ENABLED + SPIS0_ENABLED) > 1))
#error "Peripherals overlap. TWIS0, SPIS0 - only one of these can be enabled."
#endif

#if ((defined(TWIS0_ENABLED) && defined(SPI0_ENABLED)) &&\
    ((TWIS0_ENABLED + SPI0_ENABLED) > 1))
#error "Peripherals overlap. TWIS0, SPI0 - only one of these can be enabled."
#endif

#if ((defined(TWIS0_ENABLED) && defined(TWI0_ENABLED)) &&\
    ((TWIS0_ENABLED + TWI0_ENABLED) > 1))
#error "Peripherals overlap. TWIS0, TWI0 - only one of these can be enabled."
#endif

#if ((defined(SPIM0_ENABLED) && defined(SPIS0_ENABLED)) &&\
    ((SPIM0_ENABLED + SPIS0_ENABLED) > 1))
#error "Peripherals overlap. SPIM0, SPIS0 - only one of these can be enabled."
#endif

#if ((defined(SPIM0_ENABLED) && defined(SPI0_ENABLED)) &&\
    ((SPIM0_ENABLED + SPI0_ENABLED) > 1))
#error "Peripherals overlap. SPIM0, SPI0 - only one of these can be enabled."
#endif

#if ((defined(SPIM0_ENABLED) && defined(TWI0_ENABLED)) &&\
    ((SPIM0_ENABLED + TWI0_ENABLED) > 1))
#error "Peripherals overlap. SPIM0, TWI0 - only one of these can be enabled."
#endif

#if ((defined(SPIS0_ENABLED) && defined(SPI0_ENABLED)) &&\
    ((SPIS0_ENABLED + SPI0_ENABLED) > 1))
#error "Peripherals overlap. SPIS0, SPI0 - only one of these can be enabled."
#endif

#if ((defined(SPIS0_ENABLED) && defined(TWI0_ENABLED)) &&\
    ((SPIS0_ENABLED + TWI0_ENABLED) > 1))
#error "Peripherals overlap. SPIS0, TWI0 - only one of these can be enabled."
#endif

#if ((defined(SPI0_ENABLED) && defined(TWI0_ENABLED)) &&\
    ((SPI0_ENABLED + TWI0_ENABLED) > 1))
#error "Peripherals overlap. SPI0, TWI0 - only one of these can be enabled."
#endif

#if ((defined(TWIM1_ENABLED) && defined(TWIS1_ENABLED)) &&\
    ((TWIM1_ENABLED + TWIS1_ENABLED) > 1))
#error "Peripherals overlap. TWIM1, TWIS1 - only one of these can be enabled."
#endif

#if ((defined(TWIM1_ENABLED) && defined(SPIM1_ENABLED)) &&\
    ((TWIM1_ENABLED + SPIM1_ENABLED) > 1))
#error "Peripherals overlap. TWIM1, SPIM1 - only one of these can be enabled."
#endif

#if ((defined(TWIM1_ENABLED) && defined(SPIS1_ENABLED)) &&\
    ((TWIM1_ENABLED + SPIS1_ENABLED) > 1))
#error "Peripherals overlap. TWIM1, SPIS1 - only one of these can be enabled."
#endif

#if ((defined(TWIM1_ENABLED) && defined(SPI1_ENABLED)) &&\
    ((TWIM1_ENABLED + SPI1_ENABLED) > 1))
#error "Peripherals overlap. TWIM1, SPI1 - only one of these can be enabled."
#endif

#if ((defined(TWIM1_ENABLED) && defined(TWI1_ENABLED)) &&\
    ((TWIM1_ENABLED + TWI1_ENABLED) > 1))
#error "Peripherals overlap. TWIM1, TWI1 - only one of these can be enabled."
#endif

#if ((defined(TWIS1_ENABLED) && defined(SPIM1_ENABLED)) &&\
    ((TWIS1_ENABLED + SPIM1_ENABLED) > 1))
#error "Peripherals overlap. TWIS1, SPIM1 - only one of these can be enabled."
#endif

#if ((defined(TWIS1_ENABLED) && defined(SPIS1_ENABLED)) &&\
    ((TWIS1_ENABLED + SPIS1_ENABLED) > 1))
#error "Peripherals overlap. TWIS1, SPIS1 - only one of these can be enabled."
#endif

#if ((defined(TWIS1_ENABLED) && defined(SPI1_ENABLED)) &&\
    ((TWIS1_ENABLED + SPI1_ENABLED) > 1))
#error "Peripherals overlap. TWIS1, SPI1 - only one of these can be enabled."
#endif

#if ((defined(TWIS1_ENABLED) && defined(TWI1_ENABLED)) &&\
    ((TWIS1_ENABLED + TWI1_ENABLED) > 1))
#error "Peripherals overlap. TWIS1, TWI1 - only one of these can be enabled."
#endif

#if ((defined(SPIM1_ENABLED) && defined(SPIS1_ENABLED)) &&\
    ((SPIM1_ENABLED + SPIS1_ENABLED) > 1))
#error "Peripherals overlap. SPIM1, SPIS1 - only one of these can be enabled."
#endif

#if ((defined(SPIM1_ENABLED) && defined(SPI1_ENABLED)) &&\
    ((SPIM1_ENABLED + SPI1_ENABLED) > 1))
#error "Peripherals overlap. SPIM1, SPI1 - only one of these can be enabled."
#endif

#if ((defined(SPIM1_ENABLED) && defined(TWI1_ENABLED)) &&\
    ((SPIM1_ENABLED + TWI1_ENABLED) > 1))
#error "Peripherals overlap. SPIM1, TWI1 - only one of these can be enabled."
#endif

#if ((defined(SPIS1_ENABLED) && defined(SPI1_ENABLED)) &&\
    ((SPIS1_ENABLED + SPI1_ENABLED) > 1))
#error "Peripherals overlap. SPIS1, SPI1 - only one of these can be enabled."
#endif

#if ((defined(SPIS1_ENABLED) && defined(TWI1_ENABLED)) &&\
    ((SPIS1_ENABLED + TWI1_ENABLED) > 1))
#error "Peripherals overlap. SPIS1, TWI1 - only one of these can be enabled."
#endif

#if ((defined(SPI1_ENABLED) && defined(TWI1_ENABLED)) &&\
    ((SPI1_ENABLED + TWI1_ENABLED) > 1))
#error "Peripherals overlap. SPI1, TWI1 - only one of these can be enabled."
#endif

#if ((defined(SPI2_ENABLED) && defined(SPIS2_ENABLED)) &&\
    ((SPI2_ENABLED + SPIS2_ENABLED) > 1))
#error "Peripherals overlap. SPI2, SPIS2 - only one of these can be enabled."
#endif

#if ((defined(SPIM2_ENABLED) && defined(SPIS2_ENABLED)) &&\
    ((SPI2_ENABLED + SPIS2_ENABLED) > 1))
#error "Peripherals overlap. SPIM2, SPIS2 - only one of these can be enabled."
#endif

#if ((defined(SPIM2_ENABLED) && defined(SPI2_ENABLED)) &&\
    ((SPI2_ENABLED + SPIS2_ENABLED) > 1))
#error "Peripherals overlap. SPIM2, SPI2 - only one of these can be enabled."
#endif

#endif

#ifdef NFCT_PRESENT

#if ((defined(NFC_HAL_ENABLED) && defined(CLOCK_ENABLED)) &&\
    ((NFC_HAL_ENABLED) && (!CLOCK_ENABLED)))
#error "NFC_HAL requires CLOCK to work. NFC_HAL can not be enabled without CLOCK."
#endif

#if ((defined(NFC_HAL_ENABLED) && defined(TIMER4_ENABLED)) &&\
    ((NFC_HAL_ENABLED + TIMER4_ENABLED) > 1))
#error "TIMER4 is used by NFC_HAL. NFC_HAL, TIMER4 - only one of these can be enabled."
#endif

#endif
// Complex driver validation
#ifdef LPCOMP_PRESENT

#if ((defined(COMP_ENABLED) && defined(LPCOMP_ENABLED)) &&\
    (!PERIPHERAL_RESOURCE_SHARING_ENABLED) && \
    ((COMP_ENABLED + LPCOMP_ENABLED) > 1))
#error "Peripherals overlap. SPIM2, SPI2 - only one of these can be enabled."
#endif

#endif


#ifdef __cplusplus
}
#endif

#endif // SDK_VALIDATION_H