File content as of revision 172:65be27845400:

/* 
 * Copyright (c) 2000 Nordic Semiconductor ASA
 * All rights reserved.
 * 
 * Redistribution and use in source and binary forms, with or without modification,
 * are permitted provided that the following conditions are met:
 * 
 *   1. Redistributions of source code must retain the above copyright notice, this list 
 *      of conditions and the following disclaimer.
 *
 *   2. Redistributions in binary form, except as embedded into a Nordic Semiconductor ASA 
 *      integrated circuit in a product or a software update for such product, must reproduce 
 *      the above copyright notice, this list of conditions and the following disclaimer in 
 *      the documentation and/or other materials provided with the distribution.
 *
 *   3. Neither the name of Nordic Semiconductor ASA nor the names of its contributors may be 
 *      used to endorse or promote products derived from this software without specific prior 
 *      written permission.
 *
 *   4. This software, with or without modification, must only be used with a 
 *      Nordic Semiconductor ASA integrated circuit.
 *
 *   5. Any software provided in binary or object form under this license must not be reverse 
 *      engineered, decompiled, modified and/or disassembled. 
 * 
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 * 
 */

/**
  @defgroup nrf_mbr_api Master Boot Record API
  @{

  @brief APIs for updating SoftDevice and BootLoader

*/

/* Header guard */
#ifndef NRF_MBR_H__
#define NRF_MBR_H__

#include "nrf_svc.h"
#include <stdint.h>

#ifndef NRF51
#error "This header file shall only be included for nRF51 projects"
#endif

#ifdef __cplusplus
extern "C" {
#endif

/** @addtogroup NRF_MBR_DEFINES Defines
 * @{ */

/**@brief MBR SVC Base number. */
#define MBR_SVC_BASE        (0x18)

/**@brief Page size in words. */
#define PAGE_SIZE_IN_WORDS 256
/** @} */

/** @brief The size that must be reserved for the MBR when a softdevice is written to flash.
This is the offset where the first byte of the softdevice hex file is written.*/
#define MBR_SIZE                (0x1000)

/** @addtogroup NRF_MBR_ENUMS Enumerations
 * @{ */

/**@brief nRF Master Boot Record API SVC numbers. */
enum NRF_MBR_SVCS
{
  SD_MBR_COMMAND = MBR_SVC_BASE, /**< ::sd_mbr_command */
};

/**@brief Possible values for ::sd_mbr_command_t.command */
enum NRF_MBR_COMMANDS
{
  SD_MBR_COMMAND_COPY_BL,               /**< Copy a new BootLoader. @see sd_mbr_command_copy_bl_t */
  SD_MBR_COMMAND_COPY_SD,               /**< Copy a new SoftDevice. @see ::sd_mbr_command_copy_sd_t*/
  SD_MBR_COMMAND_INIT_SD,               /**< Init forwarding interrupts to SD, and run reset function in SD*/
  SD_MBR_COMMAND_COMPARE,               /**< This command works like memcmp. @see ::sd_mbr_command_compare_t*/
  SD_MBR_COMMAND_VECTOR_TABLE_BASE_SET, /**< Start forwarding all exception to this address @see ::sd_mbr_command_vector_table_base_set_t*/
};

/** @} */

/** @addtogroup NRF_MBR_TYPES Types
 * @{ */

/**@brief This command copies part of a new SoftDevice
 * The destination area is erased before copying.
 * If dst is in the middle of a flash page, that whole flash page will be erased.
 * If (dst+len) is in the middle of a flash page, that whole flash page will be erased.
 *
 * The user of this function is responsible for setting the PROTENSET registers.
 *
 * @retval ::NRF_SUCCESS indicates that the contents of the memory blocks where copied correctly.
 * @retval ::NRF_ERROR_INTERNAL indicates that the contents of the memory blocks where not verified correctly after copying.
 */
typedef struct
{
  uint32_t *src;  /**< Pointer to the source of data to be copied.*/
  uint32_t *dst;  /**< Pointer to the destination where the content is to be copied.*/
  uint32_t len;   /**< Number of 32 bit words to copy. Must be a multiple of @ref PAGE_SIZE_IN_WORDS words.*/
} sd_mbr_command_copy_sd_t;


/**@brief This command works like memcmp, but takes the length in words.
 *
 * @retval ::NRF_SUCCESS indicates that the contents of both memory blocks are equal.
 * @retval ::NRF_ERROR_NULL indicates that the contents of the memory blocks are not equal.
 */
typedef struct
{
  uint32_t *ptr1; /**< Pointer to block of memory. */
  uint32_t *ptr2; /**< Pointer to block of memory. */
  uint32_t len;   /**< Number of 32 bit words to compare.*/
} sd_mbr_command_compare_t;


/**@brief This command copies a new BootLoader.
 *  With this command, destination of BootLoader is always the address written in NRF_UICR->BOOTADDR.
 *
 *  Destination is erased by this function.
 *  If (destination+bl_len) is in the middle of a flash page, that whole flash page will be erased.
 *
 *  This function will use PROTENSET to protect the flash that is not intended to be written.
 *
 *  On Success, this function will not return. It will start the new BootLoader from reset-vector as normal.
 *
 * @retval ::NRF_ERROR_INTERNAL indicates an internal error that should not happen.
 * @retval ::NRF_ERROR_FORBIDDEN if NRF_UICR->BOOTADDR is not set.
 * @retval ::NRF_ERROR_INVALID_LENGTH if parameters attempts to read or write outside flash area.
 */
typedef struct
{
  uint32_t *bl_src;  /**< Pointer to the source of the Bootloader to be be copied.*/
  uint32_t bl_len;   /**< Number of 32 bit words to copy for BootLoader. */
} sd_mbr_command_copy_bl_t;

/**@brief Sets the base address of the interrupt vector table for interrupts forwarded from the MBR
 *
 * Once this function has been called, this address is where the MBR will start to forward interrupts to after a reset.
 *
 * To restore default forwarding this function should be called with @param address set to 0.
 * The MBR will then start forwarding to interrupts to the address in NFR_UICR->BOOTADDR or to the SoftDevice if the BOOTADDR is not set.
 *
 * @retval ::NRF_ERROR_INTERNAL indicates an internal error that should not happen.
 * @retval ::NRF_ERROR_INVALID_ADDR if parameter address is outside of the flash size.
 */
typedef struct
{
  uint32_t address; /**< The base address of the interrupt vector table for forwarded interrupts.*/
} sd_mbr_command_vector_table_base_set_t;

typedef struct
{
  uint32_t command;  /**< type of command to be issued see @ref NRF_MBR_COMMANDS. */
  union
  {
    sd_mbr_command_copy_sd_t copy_sd;  /**< Parameters for copy SoftDevice.*/
    sd_mbr_command_copy_bl_t copy_bl;  /**< Parameters for copy BootLoader.*/
    sd_mbr_command_compare_t compare;  /**< Parameters for verify.*/
    sd_mbr_command_vector_table_base_set_t base_set; /**< Parameters for vector table base set.*/
  } params;
} sd_mbr_command_t;

/** @} */

/** @addtogroup NRF_MBR_FUNCTIONS Functions
 * @{ */

/**@brief Issue Master Boot Record commands
 *
 * Commands used when updating a SoftDevice and bootloader.
 *
 * @param[in]  param Pointer to a struct describing the command.
 *
 *@note for retvals see ::sd_mbr_command_copy_sd_t ::sd_mbr_command_copy_bl_t ::sd_mbr_command_compare_t

*/
SVCALL(SD_MBR_COMMAND, uint32_t, sd_mbr_command(sd_mbr_command_t* param));

/** @} */
#ifdef __cplusplus
}
#endif
#endif // NRF_MBR_H__

/**
  @}
*/