mbed official
The official Mbed 2 C/C++ SDK provides the software platform and libraries to build your applications.
Dependents: hello SerialTestv11 SerialTestv12 Sierpinski ... more
mbed 2
This is the mbed 2 library. If you'd like to learn about Mbed OS please see the mbed-os docs.
TARGET_DISCO_F746NG/TOOLCHAIN_IAR/stm32f7xx_hal_tim_ex.h
- Committer:
- AnnaBridge
- Date:
- 2019-02-20
- Revision:
- 172:65be27845400
- Parent:
- 171:3a7713b1edbc
File content as of revision 172:65be27845400:
/**
******************************************************************************
* @file stm32f7xx_hal_tim_ex.h
* @author MCD Application Team
* @brief Header file of TIM HAL Extension module.
******************************************************************************
* @attention
*
* <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F7xx_HAL_TIM_EX_H
#define __STM32F7xx_HAL_TIM_EX_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f7xx_hal_def.h"
/** @addtogroup STM32F7xx_HAL_Driver
* @{
*/
/** @addtogroup TIMEx
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup TIMEx_Exported_Types TIM Exported Types
* @{
*/
/**
* @brief TIM Hall sensor Configuration Structure definition
*/
typedef struct
{
uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal.
This parameter can be a value of @ref TIM_Input_Capture_Polarity */
uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler.
This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
uint32_t IC1Filter; /*!< Specifies the input capture filter.
This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
uint32_t Commutation_Delay; /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
} TIM_HallSensor_InitTypeDef;
/**
* @brief TIM Master configuration Structure definition
*/
typedef struct {
uint32_t MasterOutputTrigger; /*!< Trigger output (TRGO) selection.
This parameter can be a value of @ref TIM_Master_Mode_Selection */
uint32_t MasterOutputTrigger2; /*!< Trigger output2 (TRGO2) selection
This parameter can be a value of @ref TIMEx_Master_Mode_Selection_2 */
uint32_t MasterSlaveMode; /*!< Master/slave mode selection.
This parameter can be a value of @ref TIM_Master_Slave_Mode */
}TIM_MasterConfigTypeDef;
/**
* @brief TIM Break input(s) and Dead time configuration Structure definition
* @note 2 break inputs can be configured (BKIN and BKIN2) with configurable
* filter and polarity.
*/
typedef struct
{
uint32_t OffStateRunMode; /*!< TIM off state in run mode.
This parameter can be a value of @ref TIM_OSSR_Off_State_Selection_for_Run_mode_state */
uint32_t OffStateIDLEMode; /*!< TIM off state in IDLE mode.
This parameter can be a value of @ref TIM_OSSI_Off_State_Selection_for_Idle_mode_state */
uint32_t LockLevel; /*!< TIM Lock level.
This parameter can be a value of @ref TIM_Lock_level */
uint32_t DeadTime; /*!< TIM dead Time.
This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF */
uint32_t BreakState; /*!< TIM Break State.
This parameter can be a value of @ref TIM_Break_Input_enable_disable */
uint32_t BreakPolarity; /*!< TIM Break input polarity.
This parameter can be a value of @ref TIM_Break_Polarity */
uint32_t BreakFilter; /*!< Specifies the break input filter.
This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
uint32_t Break2State; /*!< TIM Break2 State
This parameter can be a value of @ref TIMEx_Break2_Input_enable_disable */
uint32_t Break2Polarity; /*!< TIM Break2 input polarity
This parameter can be a value of @ref TIMEx_Break2_Polarity */
uint32_t Break2Filter; /*!< TIM break2 input filter.
This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
uint32_t AutomaticOutput; /*!< TIM Automatic Output Enable state
This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */
} TIM_BreakDeadTimeConfigTypeDef;
#if defined (STM32F765xx) || defined(STM32F767xx) || defined(STM32F769xx) || defined(STM32F777xx) || defined(STM32F779xx)
/**
* @brief TIM Break/Break2 input configuration
*/
typedef struct {
uint32_t Source; /*!< Specifies the source of the timer break input.
This parameter can be a value of @ref TIMEx_Break_Input_Source */
uint32_t Enable; /*!< Specifies whether or not the break input source is enabled.
This parameter can be a value of @ref TIMEx_Break_Input_Source_Enable */
uint32_t Polarity; /*!< Specifies the break input source polarity.
This parameter can be a value of @ref TIMEx_Break_Input_Source_Polarity
Not relevant when analog watchdog output of the DFSDM1 used as break input source */
} TIMEx_BreakInputConfigTypeDef;
#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup TIMEx_Exported_Constants TIMEx Exported Constants
* @{
*/
/** @defgroup TIMEx_Channel TIMEx Channel
* @{
*/
#define TIM_CHANNEL_1 ((uint32_t)0x0000U)
#define TIM_CHANNEL_2 ((uint32_t)0x0004U)
#define TIM_CHANNEL_3 ((uint32_t)0x0008U)
#define TIM_CHANNEL_4 ((uint32_t)0x000CU)
#define TIM_CHANNEL_5 ((uint32_t)0x0010U)
#define TIM_CHANNEL_6 ((uint32_t)0x0014U)
#define TIM_CHANNEL_ALL ((uint32_t)0x003CU)
/**
* @}
*/
/** @defgroup TIMEx_Output_Compare_and_PWM_modes TIMEx Output Compare and PWM Modes
* @{
*/
#define TIM_OCMODE_TIMING ((uint32_t)0x0000U)
#define TIM_OCMODE_ACTIVE ((uint32_t)TIM_CCMR1_OC1M_0)
#define TIM_OCMODE_INACTIVE ((uint32_t)TIM_CCMR1_OC1M_1)
#define TIM_OCMODE_TOGGLE ((uint32_t)TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0)
#define TIM_OCMODE_PWM1 ((uint32_t)TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1)
#define TIM_OCMODE_PWM2 ((uint32_t)TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0)
#define TIM_OCMODE_FORCED_ACTIVE ((uint32_t)TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_0)
#define TIM_OCMODE_FORCED_INACTIVE ((uint32_t)TIM_CCMR1_OC1M_2)
#define TIM_OCMODE_RETRIGERRABLE_OPM1 ((uint32_t)TIM_CCMR1_OC1M_3)
#define TIM_OCMODE_RETRIGERRABLE_OPM2 ((uint32_t)TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_0)
#define TIM_OCMODE_COMBINED_PWM1 ((uint32_t)TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_2)
#define TIM_OCMODE_COMBINED_PWM2 ((uint32_t)TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_0 | TIM_CCMR1_OC1M_2)
#define TIM_OCMODE_ASSYMETRIC_PWM1 ((uint32_t)TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_2)
#define TIM_OCMODE_ASSYMETRIC_PWM2 ((uint32_t)TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M)
/**
* @}
*/
/** @defgroup TIMEx_Remap TIMEx Remap
* @{
*/
#define TIM_TIM2_TIM8_TRGO (0x00000000U)
#define TIM_TIM2_ETH_PTP (0x00000400U)
#define TIM_TIM2_USBFS_SOF (0x00000800U)
#define TIM_TIM2_USBHS_SOF (0x00000C00U)
#define TIM_TIM5_GPIO (0x00000000U)
#define TIM_TIM5_LSI (0x00000040U)
#define TIM_TIM5_LSE (0x00000080U)
#define TIM_TIM5_RTC (0x000000C0U)
#define TIM_TIM11_GPIO (0x00000000U)
#define TIM_TIM11_SPDIFRX (0x00000001U)
#define TIM_TIM11_HSE (0x00000002U)
#define TIM_TIM11_MCO1 (0x00000003U)
/**
* @}
*/
/** @defgroup TIMEx_ClearInput_Source TIMEx Clear Input Source
* @{
*/
#define TIM_CLEARINPUTSOURCE_ETR ((uint32_t)0x0001U)
#define TIM_CLEARINPUTSOURCE_NONE ((uint32_t)0x0000U)
/**
* @}
*/
/** @defgroup TIMEx_Break2_Input_enable_disable TIMEx Break input 2 Enable
* @{
*/
#define TIM_BREAK2_DISABLE ((uint32_t)0x00000000U)
#define TIM_BREAK2_ENABLE ((uint32_t)TIM_BDTR_BK2E)
/**
* @}
*/
/** @defgroup TIMEx_Break2_Polarity TIMEx Break2 Polarity
* @{
*/
#define TIM_BREAK2POLARITY_LOW ((uint32_t)0x00000000U)
#define TIM_BREAK2POLARITY_HIGH (TIM_BDTR_BK2P)
/**
* @}
*/
/** @defgroup TIMEx_Group_Channel5 TIMEx Group Channel 5 and Channel 1, 2 or 3
* @{
*/
#define TIM_GROUPCH5_NONE ((uint32_t)0x00000000U) /* !< No effect of OC5REF on OC1REFC, OC2REFC and OC3REFC */
#define TIM_GROUPCH5_OC1REFC (TIM_CCR5_GC5C1) /* !< OC1REFC is the logical AND of OC1REFC and OC5REF */
#define TIM_GROUPCH5_OC2REFC (TIM_CCR5_GC5C2) /* !< OC2REFC is the logical AND of OC2REFC and OC5REF */
#define TIM_GROUPCH5_OC3REFC (TIM_CCR5_GC5C3) /* !< OC3REFC is the logical AND of OC3REFC and OC5REF */
/**
* @}
*/
/** @defgroup TIMEx_Master_Mode_Selection_2 TIMEx Master Mode Selection 2 (TRGO2)
* @{
*/
#define TIM_TRGO2_RESET ((uint32_t)0x00000000U)
#define TIM_TRGO2_ENABLE ((uint32_t)(TIM_CR2_MMS2_0))
#define TIM_TRGO2_UPDATE ((uint32_t)(TIM_CR2_MMS2_1))
#define TIM_TRGO2_OC1 ((uint32_t)(TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0))
#define TIM_TRGO2_OC1REF ((uint32_t)(TIM_CR2_MMS2_2))
#define TIM_TRGO2_OC2REF ((uint32_t)(TIM_CR2_MMS2_2 | TIM_CR2_MMS2_0))
#define TIM_TRGO2_OC3REF ((uint32_t)(TIM_CR2_MMS2_2 | TIM_CR2_MMS2_1))
#define TIM_TRGO2_OC4REF ((uint32_t)(TIM_CR2_MMS2_2 | TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0))
#define TIM_TRGO2_OC5REF ((uint32_t)(TIM_CR2_MMS2_3))
#define TIM_TRGO2_OC6REF ((uint32_t)(TIM_CR2_MMS2_3 | TIM_CR2_MMS2_0))
#define TIM_TRGO2_OC4REF_RISINGFALLING ((uint32_t)(TIM_CR2_MMS2_3 | TIM_CR2_MMS2_1))
#define TIM_TRGO2_OC6REF_RISINGFALLING ((uint32_t)(TIM_CR2_MMS2_3 | TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0))
#define TIM_TRGO2_OC4REF_RISING_OC6REF_RISING ((uint32_t)(TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2))
#define TIM_TRGO2_OC4REF_RISING_OC6REF_FALLING ((uint32_t)(TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2 | TIM_CR2_MMS2_0))
#define TIM_TRGO2_OC5REF_RISING_OC6REF_RISING ((uint32_t)(TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2 |TIM_CR2_MMS2_1))
#define TIM_TRGO2_OC5REF_RISING_OC6REF_FALLING ((uint32_t)(TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2 | TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0))
/**
* @}
*/
/** @defgroup TIMEx_Slave_Mode TIMEx Slave mode
* @{
*/
#define TIM_SLAVEMODE_DISABLE ((uint32_t)0x0000U)
#define TIM_SLAVEMODE_RESET ((uint32_t)(TIM_SMCR_SMS_2))
#define TIM_SLAVEMODE_GATED ((uint32_t)(TIM_SMCR_SMS_2 | TIM_SMCR_SMS_0))
#define TIM_SLAVEMODE_TRIGGER ((uint32_t)(TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1))
#define TIM_SLAVEMODE_EXTERNAL1 ((uint32_t)(TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0))
#define TIM_SLAVEMODE_COMBINED_RESETTRIGGER ((uint32_t)(TIM_SMCR_SMS_3))
/**
* @}
*/
#if defined(STM32F765xx) || defined(STM32F767xx) || defined(STM32F769xx) || defined(STM32F777xx) || defined(STM32F779xx)
/** @defgroup TIMEx_Break_Input TIM Extended Break input
* @{
*/
#define TIM_BREAKINPUT_BRK ((uint32_t)0x00000001U) /* !< Timer break input */
#define TIM_BREAKINPUT_BRK2 ((uint32_t)0x00000002U) /* !< Timer break2 input */
/**
* @}
*/
/** @defgroup TIMEx_Break_Input_Source TIM Extended Break input source
* @{
*/
#define TIM_BREAKINPUTSOURCE_BKIN ((uint32_t)0x00000001U) /* !< An external source (GPIO) is connected to the BKIN pin */
#define TIM_BREAKINPUTSOURCE_DFSDM1 ((uint32_t)0x00000008U) /* !< The analog watchdog output of the DFSDM1 peripheral is connected to the break input */
/**
* @}
*/
/** @defgroup TIMEx_Break_Input_Source_Enable TIM Extended Break input source enabling
* @{
*/
#define TIM_BREAKINPUTSOURCE_DISABLE ((uint32_t)0x00000000U) /* !< Break input source is disabled */
#define TIM_BREAKINPUTSOURCE_ENABLE ((uint32_t)0x00000001U) /* !< Break input source is enabled */
/**
* @}
*/
/** @defgroup TIMEx_Break_Input_Source_Polarity TIM Extended Break input polarity
* @{
*/
#define TIM_BREAKINPUTSOURCE_POLARITY_LOW ((uint32_t)(0x00000001)) /* !< Break input source is active low */
#define TIM_BREAKINPUTSOURCE_POLARITY_HIGH ((uint32_t)(0x00000000)) /* !< Break input source is active_high */
/**
* @}
*/
/**
* @}
*/
#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/** @defgroup TIMEx_Exported_Macros TIMEx Exported Macros
* @{
*/
/**
* @brief Sets the TIM Capture Compare Register value on runtime without
* calling another time ConfigChannel function.
* @param __HANDLE__ TIM handle.
* @param __CHANNEL__ TIM Channels to be configured.
* This parameter can be one of the following values:
* @arg TIM_CHANNEL_1: TIM Channel 1 selected
* @arg TIM_CHANNEL_2: TIM Channel 2 selected
* @arg TIM_CHANNEL_3: TIM Channel 3 selected
* @arg TIM_CHANNEL_4: TIM Channel 4 selected
* @arg TIM_CHANNEL_5: TIM Channel 5 selected
* @arg TIM_CHANNEL_6: TIM Channel 6 selected
* @param __COMPARE__ specifies the Capture Compare register new value.
* @retval None
*/
#define __HAL_TIM_SET_COMPARE(__HANDLE__, __CHANNEL__, __COMPARE__) \
(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCR1 = (__COMPARE__)) :\
((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCR2 = (__COMPARE__)) :\
((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCR3 = (__COMPARE__)) :\
((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCR4 = (__COMPARE__)) :\
((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCR5 = (__COMPARE__)) :\
((__HANDLE__)->Instance->CCR6 = (__COMPARE__)))
/**
* @brief Gets the TIM Capture Compare Register value on runtime
* @param __HANDLE__ TIM handle.
* @param __CHANNEL__ TIM Channel associated with the capture compare register
* This parameter can be one of the following values:
* @arg TIM_CHANNEL_1: get capture/compare 1 register value
* @arg TIM_CHANNEL_2: get capture/compare 2 register value
* @arg TIM_CHANNEL_3: get capture/compare 3 register value
* @arg TIM_CHANNEL_4: get capture/compare 4 register value
* @arg TIM_CHANNEL_5: get capture/compare 5 register value
* @arg TIM_CHANNEL_6: get capture/compare 6 register value
* @retval None
*/
#define __HAL_TIM_GET_COMPARE(__HANDLE__, __CHANNEL__) \
(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCR1) :\
((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCR2) :\
((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCR3) :\
((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCR4) :\
((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCR5) :\
((__HANDLE__)->Instance->CCR6))
/**
* @brief Sets the TIM Output compare preload.
* @param __HANDLE__ TIM handle.
* @param __CHANNEL__ TIM Channels to be configured.
* This parameter can be one of the following values:
* @arg TIM_CHANNEL_1: TIM Channel 1 selected
* @arg TIM_CHANNEL_2: TIM Channel 2 selected
* @arg TIM_CHANNEL_3: TIM Channel 3 selected
* @arg TIM_CHANNEL_4: TIM Channel 4 selected
* @arg TIM_CHANNEL_5: TIM Channel 5 selected
* @arg TIM_CHANNEL_6: TIM Channel 6 selected
* @retval None
*/
#define __HAL_TIM_ENABLE_OCxPRELOAD(__HANDLE__, __CHANNEL__) \
(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC1PE) :\
((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC2PE) :\
((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC3PE) :\
((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC4PE) :\
((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCMR3 |= TIM_CCMR3_OC5PE) :\
((__HANDLE__)->Instance->CCMR3 |= TIM_CCMR3_OC6PE))
/**
* @brief Resets the TIM Output compare preload.
* @param __HANDLE__ TIM handle.
* @param __CHANNEL__ TIM Channels to be configured.
* This parameter can be one of the following values:
* @arg TIM_CHANNEL_1: TIM Channel 1 selected
* @arg TIM_CHANNEL_2: TIM Channel 2 selected
* @arg TIM_CHANNEL_3: TIM Channel 3 selected
* @arg TIM_CHANNEL_4: TIM Channel 4 selected
* @arg TIM_CHANNEL_5: TIM Channel 5 selected
* @arg TIM_CHANNEL_6: TIM Channel 6 selected
* @retval None
*/
#define __HAL_TIM_DISABLE_OCxPRELOAD(__HANDLE__, __CHANNEL__) \
(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= (uint16_t)~TIM_CCMR1_OC1PE) :\
((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= (uint16_t)~TIM_CCMR1_OC2PE) :\
((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= (uint16_t)~TIM_CCMR2_OC3PE) :\
((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCMR2 &= (uint16_t)~TIM_CCMR2_OC4PE) :\
((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCMR3 &= (uint16_t)~TIM_CCMR3_OC5PE) :\
((__HANDLE__)->Instance->CCMR3 &= (uint16_t)~TIM_CCMR3_OC6PE))
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @addtogroup TIMEx_Exported_Functions
* @{
*/
/** @addtogroup TIMEx_Exported_Functions_Group1
* @{
*/
/* Timer Hall Sensor functions **********************************************/
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef* htim, TIM_HallSensor_InitTypeDef* sConfig);
HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef* htim);
void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef* htim);
void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef* htim);
/* Blocking mode: Polling */
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef* htim);
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef* htim);
/* Non-Blocking mode: Interrupt */
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef* htim);
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef* htim);
/* Non-Blocking mode: DMA */
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef* htim, uint32_t *pData, uint16_t Length);
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef* htim);
/**
* @}
*/
/** @addtogroup TIMEx_Exported_Functions_Group2
* @{
*/
/* Timer Complementary Output Compare functions *****************************/
/* Blocking mode: Polling */
HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef* htim, uint32_t Channel);
HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef* htim, uint32_t Channel);
/* Non-Blocking mode: Interrupt */
HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef* htim, uint32_t Channel);
HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef* htim, uint32_t Channel);
/* Non-Blocking mode: DMA */
HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef* htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef* htim, uint32_t Channel);
/**
* @}
*/
/** @addtogroup TIMEx_Exported_Functions_Group3
* @{
*/
/* Timer Complementary PWM functions ****************************************/
/* Blocking mode: Polling */
HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef* htim, uint32_t Channel);
HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef* htim, uint32_t Channel);
/* Non-Blocking mode: Interrupt */
HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef* htim, uint32_t Channel);
HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef* htim, uint32_t Channel);
/* Non-Blocking mode: DMA */
HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef* htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef* htim, uint32_t Channel);
/**
* @}
*/
/** @addtogroup TIMEx_Exported_Functions_Group4
* @{
*/
/* Timer Complementary One Pulse functions **********************************/
/* Blocking mode: Polling */
HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef* htim, uint32_t OutputChannel);
HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef* htim, uint32_t OutputChannel);
/* Non-Blocking mode: Interrupt */
HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef* htim, uint32_t OutputChannel);
HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef* htim, uint32_t OutputChannel);
/**
* @}
*/
/** @addtogroup TIMEx_Exported_Functions_Group5
* @{
*/
/* Extension Control functions ************************************************/
HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent(TIM_HandleTypeDef* htim, uint32_t InputTrigger, uint32_t CommutationSource);
HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_IT(TIM_HandleTypeDef* htim, uint32_t InputTrigger, uint32_t CommutationSource);
HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_DMA(TIM_HandleTypeDef* htim, uint32_t InputTrigger, uint32_t CommutationSource);
HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef* htim, TIM_MasterConfigTypeDef * sMasterConfig);
HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef* htim, TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig);
#if defined (STM32F765xx) || defined(STM32F767xx) || defined(STM32F769xx) || defined(STM32F777xx) || defined(STM32F779xx)
HAL_StatusTypeDef HAL_TIMEx_ConfigBreakInput(TIM_HandleTypeDef *htim, uint32_t BreakInput, TIMEx_BreakInputConfigTypeDef *sBreakInputConfig);
#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef* htim, uint32_t Remap);
HAL_StatusTypeDef HAL_TIMEx_GroupChannel5(TIM_HandleTypeDef *htim, uint32_t OCRef);
/**
* @}
*/
/** @addtogroup TIMEx_Exported_Functions_Group6
* @{
*/
/* Extension Callback *********************************************************/
void HAL_TIMEx_CommutationCallback(TIM_HandleTypeDef* htim);
void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef* htim);
void HAL_TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma);
/**
* @}
*/
/** @addtogroup TIMEx_Exported_Functions_Group7
* @{
*/
/* Extension Peripheral State functions **************************************/
HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef* htim);
/**
* @}
*/
/**
* @}
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/* Private macros ------------------------------------------------------------*/
/** @defgroup TIMEx_Private_Macros TIMEx Private Macros
* @{
*/
#define IS_TIM_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
((CHANNEL) == TIM_CHANNEL_2) || \
((CHANNEL) == TIM_CHANNEL_3) || \
((CHANNEL) == TIM_CHANNEL_4) || \
((CHANNEL) == TIM_CHANNEL_5) || \
((CHANNEL) == TIM_CHANNEL_6) || \
((CHANNEL) == TIM_CHANNEL_ALL))
#define IS_TIM_PWMI_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
((CHANNEL) == TIM_CHANNEL_2))
#define IS_TIM_OPM_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
((CHANNEL) == TIM_CHANNEL_2))
#define IS_TIM_COMPLEMENTARY_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
((CHANNEL) == TIM_CHANNEL_2) || \
((CHANNEL) == TIM_CHANNEL_3))
#define IS_TIM_PWM_MODE(MODE) (((MODE) == TIM_OCMODE_PWM1) || \
((MODE) == TIM_OCMODE_PWM2) || \
((MODE) == TIM_OCMODE_COMBINED_PWM1) || \
((MODE) == TIM_OCMODE_COMBINED_PWM2) || \
((MODE) == TIM_OCMODE_ASSYMETRIC_PWM1) || \
((MODE) == TIM_OCMODE_ASSYMETRIC_PWM2))
#define IS_TIM_OC_MODE(MODE) (((MODE) == TIM_OCMODE_TIMING) || \
((MODE) == TIM_OCMODE_ACTIVE) || \
((MODE) == TIM_OCMODE_INACTIVE) || \
((MODE) == TIM_OCMODE_TOGGLE) || \
((MODE) == TIM_OCMODE_FORCED_ACTIVE) || \
((MODE) == TIM_OCMODE_FORCED_INACTIVE) || \
((MODE) == TIM_OCMODE_RETRIGERRABLE_OPM1) || \
((MODE) == TIM_OCMODE_RETRIGERRABLE_OPM2))
#define IS_TIM_REMAP(__TIM_REMAP__) (((__TIM_REMAP__) == TIM_TIM2_TIM8_TRGO)||\
((__TIM_REMAP__) == TIM_TIM2_ETH_PTP)||\
((__TIM_REMAP__) == TIM_TIM2_USBFS_SOF)||\
((__TIM_REMAP__) == TIM_TIM2_USBHS_SOF)||\
((__TIM_REMAP__) == TIM_TIM5_GPIO)||\
((__TIM_REMAP__) == TIM_TIM5_LSI)||\
((__TIM_REMAP__) == TIM_TIM5_LSE)||\
((__TIM_REMAP__) == TIM_TIM5_RTC)||\
((__TIM_REMAP__) == TIM_TIM11_GPIO)||\
((__TIM_REMAP__) == TIM_TIM11_SPDIFRX)||\
((__TIM_REMAP__) == TIM_TIM11_HSE)||\
((__TIM_REMAP__) == TIM_TIM11_MCO1))
#define IS_TIM_DEADTIME(__DEADTIME__) ((__DEADTIME__) <= 0xFF)
#define IS_TIM_BREAK_FILTER(__FILTER__) ((__FILTER__) <= 0xF)
#define IS_TIM_CLEARINPUT_SOURCE(MODE) (((MODE) == TIM_CLEARINPUTSOURCE_ETR) || \
((MODE) == TIM_CLEARINPUTSOURCE_NONE))
#define IS_TIM_BREAK2_STATE(STATE) (((STATE) == TIM_BREAK2_ENABLE) || \
((STATE) == TIM_BREAK2_DISABLE))
#define IS_TIM_BREAK2_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_BREAK2POLARITY_LOW) || \
((__POLARITY__) == TIM_BREAK2POLARITY_HIGH))
#define IS_TIM_GROUPCH5(OCREF) ((((OCREF) & 0x1FFFFFFF) == 0x00000000))
#define IS_TIM_TRGO2_SOURCE(SOURCE) (((SOURCE) == TIM_TRGO2_RESET) || \
((SOURCE) == TIM_TRGO2_ENABLE) || \
((SOURCE) == TIM_TRGO2_UPDATE) || \
((SOURCE) == TIM_TRGO2_OC1) || \
((SOURCE) == TIM_TRGO2_OC1REF) || \
((SOURCE) == TIM_TRGO2_OC2REF) || \
((SOURCE) == TIM_TRGO2_OC3REF) || \
((SOURCE) == TIM_TRGO2_OC3REF) || \
((SOURCE) == TIM_TRGO2_OC4REF) || \
((SOURCE) == TIM_TRGO2_OC5REF) || \
((SOURCE) == TIM_TRGO2_OC6REF) || \
((SOURCE) == TIM_TRGO2_OC4REF_RISINGFALLING) || \
((SOURCE) == TIM_TRGO2_OC6REF_RISINGFALLING) || \
((SOURCE) == TIM_TRGO2_OC4REF_RISING_OC6REF_RISING) || \
((SOURCE) == TIM_TRGO2_OC4REF_RISING_OC6REF_FALLING) || \
((SOURCE) == TIM_TRGO2_OC5REF_RISING_OC6REF_RISING) || \
((SOURCE) == TIM_TRGO2_OC5REF_RISING_OC6REF_FALLING))
#define IS_TIM_SLAVE_MODE(MODE) (((MODE) == TIM_SLAVEMODE_DISABLE) || \
((MODE) == TIM_SLAVEMODE_RESET) || \
((MODE) == TIM_SLAVEMODE_GATED) || \
((MODE) == TIM_SLAVEMODE_TRIGGER) || \
((MODE) == TIM_SLAVEMODE_EXTERNAL1) || \
((MODE) == TIM_SLAVEMODE_COMBINED_RESETTRIGGER))
#if defined (STM32F765xx) || defined(STM32F767xx) || defined(STM32F769xx) || defined(STM32F777xx) || defined(STM32F779xx)
#define IS_TIM_BREAKINPUT(__BREAKINPUT__) (((__BREAKINPUT__) == TIM_BREAKINPUT_BRK) || \
((__BREAKINPUT__) == TIM_BREAKINPUT_BRK2))
#define IS_TIM_BREAKINPUTSOURCE(__SOURCE__) (((__SOURCE__) == TIM_BREAKINPUTSOURCE_BKIN) || \
((__SOURCE__) == TIM_BREAKINPUTSOURCE_DFSDM))
#define IS_TIM_BREAKINPUTSOURCE_STATE(__STATE__) (((__STATE__) == TIM_BREAKINPUTSOURCE_DISABLE) || \
((__STATE__) == TIM_BREAKINPUTSOURCE_ENABLE))
#define IS_TIM_BREAKINPUTSOURCE_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_BREAKINPUTSOURCE_POLARITY_LOW) || \
((__POLARITY__) == TIM_BREAKINPUTSOURCE_POLARITY_HIGH))
#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
/**
* @}
*/
/* Private functions ---------------------------------------------------------*/
/** @defgroup TIMEx_Private_Functions TIMEx Private Functions
* @{
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32F7xx_HAL_TIM_EX_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
