File content as of revision 171:3a7713b1edbc:

/* mbed Microcontroller Library
 * Copyright (c) 2006-2013 ARM Limited
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
#ifndef MBED_PINNAMES_H
#define MBED_PINNAMES_H

#include "cmsis.h"

#ifdef __cplusplus
extern "C" {
#endif

typedef enum {
    PIN_INPUT,
    PIN_OUTPUT
} PinDirection;

#define PORT_SHIFT  4

typedef enum {
    P0_0 = 0,   P0_1, P0_2, P0_3, P0_4, P0_5,
    P1_0 = 16,  P1_1, P1_2, P1_3, P1_4, P1_5, P1_6, P1_7, P1_8, P1_9, P1_10, P1_11, P1_12, P1_13, P1_14, P1_15,
    P2_0,       P2_1, P2_2, P2_3, P2_4, P2_5, P2_6, P2_7, P2_8, P2_9, P2_10, P2_11, P2_12, P2_13, P2_14, P2_15,
    P3_0,       P3_1, P3_2, P3_3, P3_4, P3_5, P3_6, P3_7, P3_8, P3_9, P3_10, P3_11, P3_12, P3_13, P3_14, P3_15,
    P4_0,       P4_1, P4_2, P4_3, P4_4, P4_5, P4_6, P4_7, P4_8, P4_9, P4_10, P4_11, P4_12, P4_13, P4_14, P4_15,
    P5_0,       P5_1, P5_2, P5_3, P5_4, P5_5, P5_6, P5_7, P5_8, P5_9, P5_10,
    P6_0 = 96,  P6_1, P6_2, P6_3, P6_4, P6_5, P6_6, P6_7, P6_8, P6_9, P6_10, P6_11, P6_12, P6_13, P6_14, P6_15,
    P7_0,       P7_1, P7_2, P7_3, P7_4, P7_5, P7_6, P7_7, P7_8, P7_9, P7_10, P7_11, P7_12, P7_13, P7_14, P7_15,
    P8_0,       P8_1, P8_2, P8_3, P8_4, P8_5, P8_6, P8_7, P8_8, P8_9, P8_10, P8_11, P8_12, P8_13, P8_14, P8_15,
    P9_0,       P9_1, P9_2, P9_3, P9_4, P9_5, P9_6, P9_7,
    
    // mbed Pin Names
    LED1 = P7_1,
    LED_RED = LED1,
    // mbed led alias to keep some test happy, becasue physically they are no LED2,LED3 & LED4 on the board
    LED2 = LED1,
    LED3 = LED2,
    LED4 = LED3,

    I2C_SCL = P1_0,
    I2C_SDA = P1_1,

    USBTX = P8_8,
    USBRX = P8_9,

    //USER_BUTTON0 = P6_0,

    // Not connected
    NC = (int)0xFFFFFFFF
} PinName;

typedef enum {
    PullUp = 0,
    PullDown = 3,
    PullNone = 2,
    OpenDrain = 4,
    PullDefault = PullDown
} PinMode;

#define PINGROUP(pin) (((pin)>>PORT_SHIFT)&0x0f)
#define PINNO(pin) ((pin)&0x0f)

#ifdef __cplusplus
}
#endif

#endif