mbed official
The official Mbed 2 C/C++ SDK provides the software platform and libraries to build your applications.
Dependents: hello SerialTestv11 SerialTestv12 Sierpinski ... more
mbed 2
This is the mbed 2 library. If you'd like to learn about Mbed OS please see the mbed-os docs.
TARGET_NUCLEO_L496ZG_P/TOOLCHAIN_IAR/stm32l4xx_ll_bus.h
- Committer:
- AnnaBridge
- Date:
- 2018-11-08
- Revision:
- 171:3a7713b1edbc
- Parent:
- TARGET_DISCO_L475VG_IOT01A/TARGET_STM/TARGET_STM32L4/device/stm32l4xx_ll_bus.h@ 161:aa5281ff4a02
File content as of revision 171:3a7713b1edbc:
/**
******************************************************************************
* @file stm32l4xx_ll_bus.h
* @author MCD Application Team
* @brief Header file of BUS LL module.
@verbatim
##### RCC Limitations #####
==============================================================================
[..]
A delay between an RCC peripheral clock enable and the effective peripheral
enabling should be taken into account in order to manage the peripheral read/write
from/to registers.
(+) This delay depends on the peripheral mapping.
(++) AHB & APB peripherals, 1 dummy read is necessary
[..]
Workarounds:
(#) For AHB & APB peripherals, a dummy read to the peripheral register has been
inserted in each LL_{BUS}_GRP{x}_EnableClock() function.
@endverbatim
******************************************************************************
* @attention
*
* <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32L4xx_LL_BUS_H
#define __STM32L4xx_LL_BUS_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32l4xx.h"
/** @addtogroup STM32L4xx_LL_Driver
* @{
*/
#if defined(RCC)
/** @defgroup BUS_LL BUS
* @{
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/* Private macros ------------------------------------------------------------*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup BUS_LL_Exported_Constants BUS Exported Constants
* @{
*/
/** @defgroup BUS_LL_EC_AHB1_GRP1_PERIPH AHB1 GRP1 PERIPH
* @{
*/
#define LL_AHB1_GRP1_PERIPH_ALL 0xFFFFFFFFU
#define LL_AHB1_GRP1_PERIPH_DMA1 RCC_AHB1ENR_DMA1EN
#define LL_AHB1_GRP1_PERIPH_DMA2 RCC_AHB1ENR_DMA2EN
#if defined(DMAMUX1)
#define LL_AHB1_GRP1_PERIPH_DMAMUX1 RCC_AHB1ENR_DMAMUX1EN
#endif /* DMAMUX1 */
#define LL_AHB1_GRP1_PERIPH_FLASH RCC_AHB1ENR_FLASHEN
#define LL_AHB1_GRP1_PERIPH_CRC RCC_AHB1ENR_CRCEN
#define LL_AHB1_GRP1_PERIPH_TSC RCC_AHB1ENR_TSCEN
#if defined(DMA2D)
#define LL_AHB1_GRP1_PERIPH_DMA2D RCC_AHB1ENR_DMA2DEN
#endif /* DMA2D */
#if defined(GFXMMU)
#define LL_AHB1_GRP1_PERIPH_GFXMMU RCC_AHB1ENR_GFXMMUEN
#endif /* GFXMMU */
#define LL_AHB1_GRP1_PERIPH_SRAM1 RCC_AHB1SMENR_SRAM1SMEN
/**
* @}
*/
/** @defgroup BUS_LL_EC_AHB2_GRP1_PERIPH AHB2 GRP1 PERIPH
* @{
*/
#define LL_AHB2_GRP1_PERIPH_ALL 0xFFFFFFFFU
#define LL_AHB2_GRP1_PERIPH_GPIOA RCC_AHB2ENR_GPIOAEN
#define LL_AHB2_GRP1_PERIPH_GPIOB RCC_AHB2ENR_GPIOBEN
#define LL_AHB2_GRP1_PERIPH_GPIOC RCC_AHB2ENR_GPIOCEN
#if defined(GPIOD)
#define LL_AHB2_GRP1_PERIPH_GPIOD RCC_AHB2ENR_GPIODEN
#endif /*GPIOD*/
#if defined(GPIOE)
#define LL_AHB2_GRP1_PERIPH_GPIOE RCC_AHB2ENR_GPIOEEN
#endif /*GPIOE*/
#if defined(GPIOF)
#define LL_AHB2_GRP1_PERIPH_GPIOF RCC_AHB2ENR_GPIOFEN
#endif /* GPIOF */
#if defined(GPIOG)
#define LL_AHB2_GRP1_PERIPH_GPIOG RCC_AHB2ENR_GPIOGEN
#endif /* GPIOG */
#define LL_AHB2_GRP1_PERIPH_GPIOH RCC_AHB2ENR_GPIOHEN
#if defined(GPIOI)
#define LL_AHB2_GRP1_PERIPH_GPIOI RCC_AHB2ENR_GPIOIEN
#endif /* GPIOI */
#if defined(USB_OTG_FS)
#define LL_AHB2_GRP1_PERIPH_OTGFS RCC_AHB2ENR_OTGFSEN
#endif /* USB_OTG_FS */
#define LL_AHB2_GRP1_PERIPH_ADC RCC_AHB2ENR_ADCEN
#if defined(DCMI)
#define LL_AHB2_GRP1_PERIPH_DCMI RCC_AHB2ENR_DCMIEN
#endif /* DCMI */
#if defined(AES)
#define LL_AHB2_GRP1_PERIPH_AES RCC_AHB2ENR_AESEN
#endif /* AES */
#if defined(HASH)
#define LL_AHB2_GRP1_PERIPH_HASH RCC_AHB2ENR_HASHEN
#endif /* HASH */
#define LL_AHB2_GRP1_PERIPH_RNG RCC_AHB2ENR_RNGEN
#if defined(OCTOSPIM)
#define LL_AHB2_GRP1_PERIPH_OSPIM RCC_AHB2ENR_OSPIMEN
#endif /* OCTOSPIM */
#if defined(SDMMC1) && defined(RCC_AHB2ENR_SDMMC1EN)
#define LL_AHB2_GRP1_PERIPH_SDMMC1 RCC_AHB2ENR_SDMMC1EN
#endif /* SDMMC1 && RCC_AHB2ENR_SDMMC1EN */
#define LL_AHB2_GRP1_PERIPH_SRAM2 RCC_AHB2SMENR_SRAM2SMEN
#if defined(SRAM3_BASE)
#define LL_AHB2_GRP1_PERIPH_SRAM3 RCC_AHB2SMENR_SRAM3SMEN
#endif /* SRAM3_BASE */
/**
* @}
*/
/** @defgroup BUS_LL_EC_AHB3_GRP1_PERIPH AHB3 GRP1 PERIPH
* @{
*/
#define LL_AHB3_GRP1_PERIPH_ALL 0xFFFFFFFFU
#if defined(FMC_Bank1_R)
#define LL_AHB3_GRP1_PERIPH_FMC RCC_AHB3ENR_FMCEN
#endif /* FMC_Bank1_R */
#if defined(QUADSPI)
#define LL_AHB3_GRP1_PERIPH_QSPI RCC_AHB3ENR_QSPIEN
#endif /* QUADSPI */
#if defined(OCTOSPI1)
#define LL_AHB3_GRP1_PERIPH_OSPI1 RCC_AHB3ENR_OSPI1EN
#endif /* OCTOSPI1 */
#if defined(OCTOSPI2)
#define LL_AHB3_GRP1_PERIPH_OSPI2 RCC_AHB3ENR_OSPI2EN
#endif /* OCTOSPI2 */
/**
* @}
*/
/** @defgroup BUS_LL_EC_APB1_GRP1_PERIPH APB1 GRP1 PERIPH
* @{
*/
#define LL_APB1_GRP1_PERIPH_ALL 0xFFFFFFFFU
#define LL_APB1_GRP1_PERIPH_TIM2 RCC_APB1ENR1_TIM2EN
#if defined(TIM3)
#define LL_APB1_GRP1_PERIPH_TIM3 RCC_APB1ENR1_TIM3EN
#endif /* TIM3 */
#if defined(TIM4)
#define LL_APB1_GRP1_PERIPH_TIM4 RCC_APB1ENR1_TIM4EN
#endif /* TIM4 */
#if defined(TIM5)
#define LL_APB1_GRP1_PERIPH_TIM5 RCC_APB1ENR1_TIM5EN
#endif /* TIM5 */
#define LL_APB1_GRP1_PERIPH_TIM6 RCC_APB1ENR1_TIM6EN
#define LL_APB1_GRP1_PERIPH_TIM7 RCC_APB1ENR1_TIM7EN
#if defined(LCD)
#define LL_APB1_GRP1_PERIPH_LCD RCC_APB1ENR1_LCDEN
#endif /* LCD */
#if defined(RCC_APB1ENR1_RTCAPBEN)
#define LL_APB1_GRP1_PERIPH_RTCAPB RCC_APB1ENR1_RTCAPBEN
#endif /* RCC_APB1ENR1_RTCAPBEN */
#define LL_APB1_GRP1_PERIPH_WWDG RCC_APB1ENR1_WWDGEN
#if defined(SPI2)
#define LL_APB1_GRP1_PERIPH_SPI2 RCC_APB1ENR1_SPI2EN
#endif /* SPI2 */
#define LL_APB1_GRP1_PERIPH_SPI3 RCC_APB1ENR1_SPI3EN
#define LL_APB1_GRP1_PERIPH_USART2 RCC_APB1ENR1_USART2EN
#if defined(USART3)
#define LL_APB1_GRP1_PERIPH_USART3 RCC_APB1ENR1_USART3EN
#endif /* USART3 */
#if defined(UART4)
#define LL_APB1_GRP1_PERIPH_UART4 RCC_APB1ENR1_UART4EN
#endif /* UART4 */
#if defined(UART5)
#define LL_APB1_GRP1_PERIPH_UART5 RCC_APB1ENR1_UART5EN
#endif /* UART5 */
#define LL_APB1_GRP1_PERIPH_I2C1 RCC_APB1ENR1_I2C1EN
#if defined(I2C2)
#define LL_APB1_GRP1_PERIPH_I2C2 RCC_APB1ENR1_I2C2EN
#endif /* I2C2 */
#define LL_APB1_GRP1_PERIPH_I2C3 RCC_APB1ENR1_I2C3EN
#if defined(CRS)
#define LL_APB1_GRP1_PERIPH_CRS RCC_APB1ENR1_CRSEN
#endif /* CRS */
#define LL_APB1_GRP1_PERIPH_CAN1 RCC_APB1ENR1_CAN1EN
#if defined(CAN2)
#define LL_APB1_GRP1_PERIPH_CAN2 RCC_APB1ENR1_CAN2EN
#endif /* CAN2 */
#if defined(USB)
#define LL_APB1_GRP1_PERIPH_USB RCC_APB1ENR1_USBFSEN
#endif /* USB */
#define LL_APB1_GRP1_PERIPH_PWR RCC_APB1ENR1_PWREN
#define LL_APB1_GRP1_PERIPH_DAC1 RCC_APB1ENR1_DAC1EN
#define LL_APB1_GRP1_PERIPH_OPAMP RCC_APB1ENR1_OPAMPEN
#define LL_APB1_GRP1_PERIPH_LPTIM1 RCC_APB1ENR1_LPTIM1EN
/**
* @}
*/
/** @defgroup BUS_LL_EC_APB1_GRP2_PERIPH APB1 GRP2 PERIPH
* @{
*/
#define LL_APB1_GRP2_PERIPH_ALL 0xFFFFFFFFU
#define LL_APB1_GRP2_PERIPH_LPUART1 RCC_APB1ENR2_LPUART1EN
#if defined(I2C4)
#define LL_APB1_GRP2_PERIPH_I2C4 RCC_APB1ENR2_I2C4EN
#endif /* I2C4 */
#if defined(SWPMI1)
#define LL_APB1_GRP2_PERIPH_SWPMI1 RCC_APB1ENR2_SWPMI1EN
#endif /* SWPMI1 */
#define LL_APB1_GRP2_PERIPH_LPTIM2 RCC_APB1ENR2_LPTIM2EN
/**
* @}
*/
/** @defgroup BUS_LL_EC_APB2_GRP1_PERIPH APB2 GRP1 PERIPH
* @{
*/
#define LL_APB2_GRP1_PERIPH_ALL 0xFFFFFFFFU
#define LL_APB2_GRP1_PERIPH_SYSCFG RCC_APB2ENR_SYSCFGEN
#define LL_APB2_GRP1_PERIPH_FW RCC_APB2ENR_FWEN
#if defined(SDMMC1) && defined(RCC_APB2ENR_SDMMC1EN)
#define LL_APB2_GRP1_PERIPH_SDMMC1 RCC_APB2ENR_SDMMC1EN
#endif /* SDMMC1 && RCC_APB2ENR_SDMMC1EN */
#define LL_APB2_GRP1_PERIPH_TIM1 RCC_APB2ENR_TIM1EN
#define LL_APB2_GRP1_PERIPH_SPI1 RCC_APB2ENR_SPI1EN
#if defined(TIM8)
#define LL_APB2_GRP1_PERIPH_TIM8 RCC_APB2ENR_TIM8EN
#endif /* TIM8 */
#define LL_APB2_GRP1_PERIPH_USART1 RCC_APB2ENR_USART1EN
#define LL_APB2_GRP1_PERIPH_TIM15 RCC_APB2ENR_TIM15EN
#define LL_APB2_GRP1_PERIPH_TIM16 RCC_APB2ENR_TIM16EN
#if defined(TIM17)
#define LL_APB2_GRP1_PERIPH_TIM17 RCC_APB2ENR_TIM17EN
#endif /* TIM17 */
#define LL_APB2_GRP1_PERIPH_SAI1 RCC_APB2ENR_SAI1EN
#if defined(SAI2)
#define LL_APB2_GRP1_PERIPH_SAI2 RCC_APB2ENR_SAI2EN
#endif /* SAI2 */
#if defined(DFSDM1_Channel0)
#define LL_APB2_GRP1_PERIPH_DFSDM1 RCC_APB2ENR_DFSDM1EN
#endif /* DFSDM1_Channel0 */
#if defined(LTDC)
#define LL_APB2_GRP1_PERIPH_LTDC RCC_APB2ENR_LTDCEN
#endif /* LTDC */
#if defined(DSI)
#define LL_APB2_GRP1_PERIPH_DSI RCC_APB2ENR_DSIEN
#endif /* DSI */
/**
* @}
*/
/** Legacy definitions for compatibility purpose
@cond 0
*/
#if defined(DFSDM1_Channel0)
#define LL_APB2_GRP1_PERIPH_DFSDM LL_APB2_GRP1_PERIPH_DFSDM1
#endif /* DFSDM1_Channel0 */
/**
@endcond
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup BUS_LL_Exported_Functions BUS Exported Functions
* @{
*/
/** @defgroup BUS_LL_EF_AHB1 AHB1
* @{
*/
/**
* @brief Enable AHB1 peripherals clock.
* @rmtoll AHB1ENR DMA1EN LL_AHB1_GRP1_EnableClock\n
* AHB1ENR DMA2EN LL_AHB1_GRP1_EnableClock\n
* AHB1ENR DMAMUX1EN LL_AHB1_GRP1_EnableClock\n
* AHB1ENR FLASHEN LL_AHB1_GRP1_EnableClock\n
* AHB1ENR CRCEN LL_AHB1_GRP1_EnableClock\n
* AHB1ENR TSCEN LL_AHB1_GRP1_EnableClock\n
* AHB1ENR DMA2DEN LL_AHB1_GRP1_EnableClock\n
* AHB1ENR GFXMMUEN LL_AHB1_GRP1_EnableClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA2
* @arg @ref LL_AHB1_GRP1_PERIPH_DMAMUX1 (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_FLASH
* @arg @ref LL_AHB1_GRP1_PERIPH_CRC
* @arg @ref LL_AHB1_GRP1_PERIPH_TSC
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA2D (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_GFXMMU (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_AHB1_GRP1_EnableClock(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC->AHB1ENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC->AHB1ENR, Periphs);
(void)tmpreg;
}
/**
* @brief Check if AHB1 peripheral clock is enabled or not
* @rmtoll AHB1ENR DMA1EN LL_AHB1_GRP1_IsEnabledClock\n
* AHB1ENR DMA2EN LL_AHB1_GRP1_IsEnabledClock\n
* AHB1ENR DMAMUX1EN LL_AHB1_GRP1_IsEnabledClock\n
* AHB1ENR FLASHEN LL_AHB1_GRP1_IsEnabledClock\n
* AHB1ENR CRCEN LL_AHB1_GRP1_IsEnabledClock\n
* AHB1ENR TSCEN LL_AHB1_GRP1_IsEnabledClock\n
* AHB1ENR DMA2DEN LL_AHB1_GRP1_IsEnabledClock\n
* AHB1ENR GFXMMUEN LL_AHB1_GRP1_IsEnabledClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA2
* @arg @ref LL_AHB1_GRP1_PERIPH_DMAMUX1 (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_FLASH
* @arg @ref LL_AHB1_GRP1_PERIPH_CRC
* @arg @ref LL_AHB1_GRP1_PERIPH_TSC
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA2D (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_GFXMMU (*)
*
* (*) value not defined in all devices.
* @retval State of Periphs (1 or 0).
*/
__STATIC_INLINE uint32_t LL_AHB1_GRP1_IsEnabledClock(uint32_t Periphs)
{
return (READ_BIT(RCC->AHB1ENR, Periphs) == Periphs);
}
/**
* @brief Disable AHB1 peripherals clock.
* @rmtoll AHB1ENR DMA1EN LL_AHB1_GRP1_DisableClock\n
* AHB1ENR DMA2EN LL_AHB1_GRP1_DisableClock\n
* AHB1ENR DMAMUX1EN LL_AHB1_GRP1_DisableClock\n
* AHB1ENR FLASHEN LL_AHB1_GRP1_DisableClock\n
* AHB1ENR CRCEN LL_AHB1_GRP1_DisableClock\n
* AHB1ENR TSCEN LL_AHB1_GRP1_DisableClock\n
* AHB1ENR DMA2DEN LL_AHB1_GRP1_DisableClock\n
* AHB1ENR GFXMMUEN LL_AHB1_GRP1_DisableClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA2
* @arg @ref LL_AHB1_GRP1_PERIPH_DMAMUX1 (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_FLASH
* @arg @ref LL_AHB1_GRP1_PERIPH_CRC
* @arg @ref LL_AHB1_GRP1_PERIPH_TSC
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA2D (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_GFXMMU (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_AHB1_GRP1_DisableClock(uint32_t Periphs)
{
CLEAR_BIT(RCC->AHB1ENR, Periphs);
}
/**
* @brief Force AHB1 peripherals reset.
* @rmtoll AHB1RSTR DMA1RST LL_AHB1_GRP1_ForceReset\n
* AHB1RSTR DMA2RST LL_AHB1_GRP1_ForceReset\n
* AHB1RSTR DMAMUX1RST LL_AHB1_GRP1_ForceReset\n
* AHB1RSTR FLASHRST LL_AHB1_GRP1_ForceReset\n
* AHB1RSTR CRCRST LL_AHB1_GRP1_ForceReset\n
* AHB1RSTR TSCRST LL_AHB1_GRP1_ForceReset\n
* AHB1RSTR DMA2DRST LL_AHB1_GRP1_ForceReset\n
* AHB1RSTR GFXMMURST LL_AHB1_GRP1_ForceReset
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB1_GRP1_PERIPH_ALL
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA2
* @arg @ref LL_AHB1_GRP1_PERIPH_DMAMUX1 (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_FLASH
* @arg @ref LL_AHB1_GRP1_PERIPH_CRC
* @arg @ref LL_AHB1_GRP1_PERIPH_TSC
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA2D (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_GFXMMU (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_AHB1_GRP1_ForceReset(uint32_t Periphs)
{
SET_BIT(RCC->AHB1RSTR, Periphs);
}
/**
* @brief Release AHB1 peripherals reset.
* @rmtoll AHB1RSTR DMA1RST LL_AHB1_GRP1_ReleaseReset\n
* AHB1RSTR DMA2RST LL_AHB1_GRP1_ReleaseReset\n
* AHB1RSTR DMAMUX1RST LL_AHB1_GRP1_ReleaseReset\n
* AHB1RSTR FLASHRST LL_AHB1_GRP1_ReleaseReset\n
* AHB1RSTR CRCRST LL_AHB1_GRP1_ReleaseReset\n
* AHB1RSTR TSCRST LL_AHB1_GRP1_ReleaseReset\n
* AHB1RSTR DMA2DRST LL_AHB1_GRP1_ReleaseReset\n
* AHB1RSTR GFXMMURST LL_AHB1_GRP1_ReleaseReset
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB1_GRP1_PERIPH_ALL
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA2
* @arg @ref LL_AHB1_GRP1_PERIPH_DMAMUX1 (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_FLASH
* @arg @ref LL_AHB1_GRP1_PERIPH_CRC
* @arg @ref LL_AHB1_GRP1_PERIPH_TSC
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA2D (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_GFXMMU (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_AHB1_GRP1_ReleaseReset(uint32_t Periphs)
{
CLEAR_BIT(RCC->AHB1RSTR, Periphs);
}
/**
* @brief Enable AHB1 peripheral clocks in Sleep and Stop modes
* @rmtoll AHB1SMENR DMA1SMEN LL_AHB1_GRP1_EnableClockStopSleep\n
* AHB1SMENR DMA2SMEN LL_AHB1_GRP1_EnableClockStopSleep\n
* AHB1SMENR DMAMUX1SMEN LL_AHB1_GRP1_EnableClockStopSleep\n
* AHB1SMENR FLASHSMEN LL_AHB1_GRP1_EnableClockStopSleep\n
* AHB1SMENR SRAM1SMEN LL_AHB1_GRP1_EnableClockStopSleep\n
* AHB1SMENR CRCSMEN LL_AHB1_GRP1_EnableClockStopSleep\n
* AHB1SMENR TSCSMEN LL_AHB1_GRP1_EnableClockStopSleep\n
* AHB1SMENR DMA2DSMEN LL_AHB1_GRP1_EnableClockStopSleep\n
* AHB1SMENR GFXMMUSMEN LL_AHB1_GRP1_EnableClockStopSleep
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA2
* @arg @ref LL_AHB1_GRP1_PERIPH_DMAMUX1 (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_FLASH
* @arg @ref LL_AHB1_GRP1_PERIPH_SRAM1
* @arg @ref LL_AHB1_GRP1_PERIPH_CRC
* @arg @ref LL_AHB1_GRP1_PERIPH_TSC
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA2D (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_GFXMMU (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_AHB1_GRP1_EnableClockStopSleep(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC->AHB1SMENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC->AHB1SMENR, Periphs);
(void)tmpreg;
}
/**
* @brief Disable AHB1 peripheral clocks in Sleep and Stop modes
* @rmtoll AHB1SMENR DMA1SMEN LL_AHB1_GRP1_DisableClockStopSleep\n
* AHB1SMENR DMA2SMEN LL_AHB1_GRP1_DisableClockStopSleep\n
* AHB1SMENR DMAMUX1SMEN LL_AHB1_GRP1_DisableClockStopSleep\n
* AHB1SMENR FLASHSMEN LL_AHB1_GRP1_DisableClockStopSleep\n
* AHB1SMENR SRAM1SMEN LL_AHB1_GRP1_DisableClockStopSleep\n
* AHB1SMENR CRCSMEN LL_AHB1_GRP1_DisableClockStopSleep\n
* AHB1SMENR TSCSMEN LL_AHB1_GRP1_DisableClockStopSleep\n
* AHB1SMENR DMA2DSMEN LL_AHB1_GRP1_DisableClockStopSleep\n
* AHB1SMENR GFXMMUSMEN LL_AHB1_GRP1_DisableClockStopSleep
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA2
* @arg @ref LL_AHB1_GRP1_PERIPH_DMAMUX1 (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_FLASH
* @arg @ref LL_AHB1_GRP1_PERIPH_SRAM1
* @arg @ref LL_AHB1_GRP1_PERIPH_CRC
* @arg @ref LL_AHB1_GRP1_PERIPH_TSC
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA2D (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_GFXMMU (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_AHB1_GRP1_DisableClockStopSleep(uint32_t Periphs)
{
CLEAR_BIT(RCC->AHB1SMENR, Periphs);
}
/**
* @}
*/
/** @defgroup BUS_LL_EF_AHB2 AHB2
* @{
*/
/**
* @brief Enable AHB2 peripherals clock.
* @rmtoll AHB2ENR GPIOAEN LL_AHB2_GRP1_EnableClock\n
* AHB2ENR GPIOBEN LL_AHB2_GRP1_EnableClock\n
* AHB2ENR GPIOCEN LL_AHB2_GRP1_EnableClock\n
* AHB2ENR GPIODEN LL_AHB2_GRP1_EnableClock\n
* AHB2ENR GPIOEEN LL_AHB2_GRP1_EnableClock\n
* AHB2ENR GPIOFEN LL_AHB2_GRP1_EnableClock\n
* AHB2ENR GPIOGEN LL_AHB2_GRP1_EnableClock\n
* AHB2ENR GPIOHEN LL_AHB2_GRP1_EnableClock\n
* AHB2ENR GPIOIEN LL_AHB2_GRP1_EnableClock\n
* AHB2ENR OTGFSEN LL_AHB2_GRP1_EnableClock\n
* AHB2ENR ADCEN LL_AHB2_GRP1_EnableClock\n
* AHB2ENR DCMIEN LL_AHB2_GRP1_EnableClock\n
* AHB2ENR AESEN LL_AHB2_GRP1_EnableClock\n
* AHB2ENR HASHEN LL_AHB2_GRP1_EnableClock\n
* AHB2ENR RNGEN LL_AHB2_GRP1_EnableClock\n
* AHB2ENR OSPIMEN LL_AHB2_GRP1_EnableClock\n
* AHB2ENR SDMMC1EN LL_AHB2_GRP1_EnableClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOA
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOB
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOC
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOD (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOE (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOF (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOG (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOH
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOI (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_ADC
* @arg @ref LL_AHB2_GRP1_PERIPH_DCMI (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_AES (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_RNG
* @arg @ref LL_AHB2_GRP1_PERIPH_OSPIM (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC1 (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_AHB2_GRP1_EnableClock(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC->AHB2ENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC->AHB2ENR, Periphs);
(void)tmpreg;
}
/**
* @brief Check if AHB2 peripheral clock is enabled or not
* @rmtoll AHB2ENR GPIOAEN LL_AHB2_GRP1_IsEnabledClock\n
* AHB2ENR GPIOBEN LL_AHB2_GRP1_IsEnabledClock\n
* AHB2ENR GPIOCEN LL_AHB2_GRP1_IsEnabledClock\n
* AHB2ENR GPIODEN LL_AHB2_GRP1_IsEnabledClock\n
* AHB2ENR GPIOEEN LL_AHB2_GRP1_IsEnabledClock\n
* AHB2ENR GPIOFEN LL_AHB2_GRP1_IsEnabledClock\n
* AHB2ENR GPIOGEN LL_AHB2_GRP1_IsEnabledClock\n
* AHB2ENR GPIOHEN LL_AHB2_GRP1_IsEnabledClock\n
* AHB2ENR GPIOIEN LL_AHB2_GRP1_IsEnabledClock\n
* AHB2ENR OTGFSEN LL_AHB2_GRP1_IsEnabledClock\n
* AHB2ENR ADCEN LL_AHB2_GRP1_IsEnabledClock\n
* AHB2ENR DCMIEN LL_AHB2_GRP1_IsEnabledClock\n
* AHB2ENR AESEN LL_AHB2_GRP1_IsEnabledClock\n
* AHB2ENR HASHEN LL_AHB2_GRP1_IsEnabledClock\n
* AHB2ENR RNGEN LL_AHB2_GRP1_IsEnabledClock\n
* AHB2ENR OSPIMEN LL_AHB2_GRP1_IsEnabledClock\n
* AHB2ENR SDMMC1EN LL_AHB2_GRP1_IsEnabledClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOA
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOB
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOC
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOD (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOE (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOF (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOG (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOH
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOI (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_ADC
* @arg @ref LL_AHB2_GRP1_PERIPH_DCMI (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_AES (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_RNG
* @arg @ref LL_AHB2_GRP1_PERIPH_OSPIM (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC1 (*)
*
* (*) value not defined in all devices.
* @retval State of Periphs (1 or 0).
*/
__STATIC_INLINE uint32_t LL_AHB2_GRP1_IsEnabledClock(uint32_t Periphs)
{
return (READ_BIT(RCC->AHB2ENR, Periphs) == Periphs);
}
/**
* @brief Disable AHB2 peripherals clock.
* @rmtoll AHB2ENR GPIOAEN LL_AHB2_GRP1_DisableClock\n
* AHB2ENR GPIOBEN LL_AHB2_GRP1_DisableClock\n
* AHB2ENR GPIOCEN LL_AHB2_GRP1_DisableClock\n
* AHB2ENR GPIODEN LL_AHB2_GRP1_DisableClock\n
* AHB2ENR GPIOEEN LL_AHB2_GRP1_DisableClock\n
* AHB2ENR GPIOFEN LL_AHB2_GRP1_DisableClock\n
* AHB2ENR GPIOGEN LL_AHB2_GRP1_DisableClock\n
* AHB2ENR GPIOHEN LL_AHB2_GRP1_DisableClock\n
* AHB2ENR GPIOIEN LL_AHB2_GRP1_DisableClock\n
* AHB2ENR OTGFSEN LL_AHB2_GRP1_DisableClock\n
* AHB2ENR ADCEN LL_AHB2_GRP1_DisableClock\n
* AHB2ENR DCMIEN LL_AHB2_GRP1_DisableClock\n
* AHB2ENR AESEN LL_AHB2_GRP1_DisableClock\n
* AHB2ENR HASHEN LL_AHB2_GRP1_DisableClock\n
* AHB2ENR RNGEN LL_AHB2_GRP1_DisableClock\n
* AHB2ENR OSPIMEN LL_AHB2_GRP1_DisableClock\n
* AHB2ENR SDMMC1EN LL_AHB2_GRP1_DisableClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOA
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOB
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOC
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOD (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOE (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOF (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOG (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOH
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOI (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_ADC
* @arg @ref LL_AHB2_GRP1_PERIPH_DCMI (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_AES (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_RNG
* @arg @ref LL_AHB2_GRP1_PERIPH_OSPIM (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC1 (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_AHB2_GRP1_DisableClock(uint32_t Periphs)
{
CLEAR_BIT(RCC->AHB2ENR, Periphs);
}
/**
* @brief Force AHB2 peripherals reset.
* @rmtoll AHB2RSTR GPIOARST LL_AHB2_GRP1_ForceReset\n
* AHB2RSTR GPIOBRST LL_AHB2_GRP1_ForceReset\n
* AHB2RSTR GPIOCRST LL_AHB2_GRP1_ForceReset\n
* AHB2RSTR GPIODRST LL_AHB2_GRP1_ForceReset\n
* AHB2RSTR GPIOERST LL_AHB2_GRP1_ForceReset\n
* AHB2RSTR GPIOFRST LL_AHB2_GRP1_ForceReset\n
* AHB2RSTR GPIOGRST LL_AHB2_GRP1_ForceReset\n
* AHB2RSTR GPIOHRST LL_AHB2_GRP1_ForceReset\n
* AHB2RSTR GPIOIRST LL_AHB2_GRP1_ForceReset\n
* AHB2RSTR OTGFSRST LL_AHB2_GRP1_ForceReset\n
* AHB2RSTR ADCRST LL_AHB2_GRP1_ForceReset\n
* AHB2RSTR DCMIRST LL_AHB2_GRP1_ForceReset\n
* AHB2RSTR AESRST LL_AHB2_GRP1_ForceReset\n
* AHB2RSTR HASHRST LL_AHB2_GRP1_ForceReset\n
* AHB2RSTR RNGRST LL_AHB2_GRP1_ForceReset\n
* AHB2RSTR OSPIMRST LL_AHB2_GRP1_ForceReset\n
* AHB2RSTR SDMMC1RST LL_AHB2_GRP1_ForceReset
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB2_GRP1_PERIPH_ALL
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOA
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOB
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOC
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOD (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOE (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOF (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOG (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOH
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOI (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_ADC
* @arg @ref LL_AHB2_GRP1_PERIPH_DCMI (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_AES (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_RNG
* @arg @ref LL_AHB2_GRP1_PERIPH_OSPIM (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC1 (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_AHB2_GRP1_ForceReset(uint32_t Periphs)
{
SET_BIT(RCC->AHB2RSTR, Periphs);
}
/**
* @brief Release AHB2 peripherals reset.
* @rmtoll AHB2RSTR GPIOARST LL_AHB2_GRP1_ReleaseReset\n
* AHB2RSTR GPIOBRST LL_AHB2_GRP1_ReleaseReset\n
* AHB2RSTR GPIOCRST LL_AHB2_GRP1_ReleaseReset\n
* AHB2RSTR GPIODRST LL_AHB2_GRP1_ReleaseReset\n
* AHB2RSTR GPIOERST LL_AHB2_GRP1_ReleaseReset\n
* AHB2RSTR GPIOFRST LL_AHB2_GRP1_ReleaseReset\n
* AHB2RSTR GPIOGRST LL_AHB2_GRP1_ReleaseReset\n
* AHB2RSTR GPIOHRST LL_AHB2_GRP1_ReleaseReset\n
* AHB2RSTR GPIOIRST LL_AHB2_GRP1_ReleaseReset\n
* AHB2RSTR OTGFSRST LL_AHB2_GRP1_ReleaseReset\n
* AHB2RSTR ADCRST LL_AHB2_GRP1_ReleaseReset\n
* AHB2RSTR DCMIRST LL_AHB2_GRP1_ReleaseReset\n
* AHB2RSTR AESRST LL_AHB2_GRP1_ReleaseReset\n
* AHB2RSTR HASHRST LL_AHB2_GRP1_ReleaseReset\n
* AHB2RSTR RNGRST LL_AHB2_GRP1_ReleaseReset\n
* AHB2RSTR OSPIMRST LL_AHB2_GRP1_ReleaseReset\n
* AHB2RSTR SDMMC1RST LL_AHB2_GRP1_ReleaseReset
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB2_GRP1_PERIPH_ALL
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOA
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOB
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOC
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOD (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOE (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOF (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOG (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOH
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOI (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_ADC
* @arg @ref LL_AHB2_GRP1_PERIPH_DCMI (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_AES (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_RNG
* @arg @ref LL_AHB2_GRP1_PERIPH_OSPIM (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC1 (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_AHB2_GRP1_ReleaseReset(uint32_t Periphs)
{
CLEAR_BIT(RCC->AHB2RSTR, Periphs);
}
/**
* @brief Enable AHB2 peripheral clocks in Sleep and Stop modes
* @rmtoll AHB2SMENR GPIOASMEN LL_AHB2_GRP1_EnableClockStopSleep\n
* AHB2SMENR GPIOBSMEN LL_AHB2_GRP1_EnableClockStopSleep\n
* AHB2SMENR GPIOCSMEN LL_AHB2_GRP1_EnableClockStopSleep\n
* AHB2SMENR GPIODSMEN LL_AHB2_GRP1_EnableClockStopSleep\n
* AHB2SMENR GPIOESMEN LL_AHB2_GRP1_EnableClockStopSleep\n
* AHB2SMENR GPIOFSMEN LL_AHB2_GRP1_EnableClockStopSleep\n
* AHB2SMENR GPIOGSMEN LL_AHB2_GRP1_EnableClockStopSleep\n
* AHB2SMENR GPIOHSMEN LL_AHB2_GRP1_EnableClockStopSleep\n
* AHB2SMENR GPIOISMEN LL_AHB2_GRP1_EnableClockStopSleep\n
* AHB2SMENR SRAM2SMEN LL_AHB2_GRP1_EnableClockStopSleep\n
* AHB2SMENR SRAM3SMEN LL_AHB2_GRP1_EnableClockStopSleep\n
* AHB2SMENR OTGFSSMEN LL_AHB2_GRP1_EnableClockStopSleep\n
* AHB2SMENR ADCSMEN LL_AHB2_GRP1_EnableClockStopSleep\n
* AHB2SMENR DCMISMEN LL_AHB2_GRP1_EnableClockStopSleep\n
* AHB2SMENR AESSMEN LL_AHB2_GRP1_EnableClockStopSleep\n
* AHB2SMENR HASHSMEN LL_AHB2_GRP1_EnableClockStopSleep\n
* AHB2SMENR RNGSMEN LL_AHB2_GRP1_EnableClockStopSleep\n
* AHB2SMENR OSPIMSMEN LL_AHB2_GRP1_EnableClockStopSleep\n
* AHB2SMENR SDMMC1SMEN LL_AHB2_GRP1_EnableClockStopSleep
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOA
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOB
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOC
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOD (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOE (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOF (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOG (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOH
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOI (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_SRAM2
* @arg @ref LL_AHB2_GRP1_PERIPH_SRAM3 (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_ADC
* @arg @ref LL_AHB2_GRP1_PERIPH_DCMI (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_AES (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_RNG
* @arg @ref LL_AHB2_GRP1_PERIPH_OSPIM (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC1 (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_AHB2_GRP1_EnableClockStopSleep(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC->AHB2SMENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC->AHB2SMENR, Periphs);
(void)tmpreg;
}
/**
* @brief Disable AHB2 peripheral clocks in Sleep and Stop modes
* @rmtoll AHB2SMENR GPIOASMEN LL_AHB2_GRP1_DisableClockStopSleep\n
* AHB2SMENR GPIOBSMEN LL_AHB2_GRP1_DisableClockStopSleep\n
* AHB2SMENR GPIOCSMEN LL_AHB2_GRP1_DisableClockStopSleep\n
* AHB2SMENR GPIODSMEN LL_AHB2_GRP1_DisableClockStopSleep\n
* AHB2SMENR GPIOESMEN LL_AHB2_GRP1_DisableClockStopSleep\n
* AHB2SMENR GPIOFSMEN LL_AHB2_GRP1_DisableClockStopSleep\n
* AHB2SMENR GPIOGSMEN LL_AHB2_GRP1_DisableClockStopSleep\n
* AHB2SMENR GPIOHSMEN LL_AHB2_GRP1_DisableClockStopSleep\n
* AHB2SMENR GPIOISMEN LL_AHB2_GRP1_DisableClockStopSleep\n
* AHB2SMENR SRAM2SMEN LL_AHB2_GRP1_DisableClockStopSleep\n
* AHB2SMENR SRAM3SMEN LL_AHB2_GRP1_DisableClockStopSleep\n
* AHB2SMENR OTGFSSMEN LL_AHB2_GRP1_DisableClockStopSleep\n
* AHB2SMENR ADCSMEN LL_AHB2_GRP1_DisableClockStopSleep\n
* AHB2SMENR DCMISMEN LL_AHB2_GRP1_DisableClockStopSleep\n
* AHB2SMENR AESSMEN LL_AHB2_GRP1_DisableClockStopSleep\n
* AHB2SMENR HASHSMEN LL_AHB2_GRP1_DisableClockStopSleep\n
* AHB2SMENR RNGSMEN LL_AHB2_GRP1_DisableClockStopSleep\n
* AHB2SMENR OSPIMSMEN LL_AHB2_GRP1_DisableClockStopSleep\n
* AHB2SMENR SDMMC1SMEN LL_AHB2_GRP1_DisableClockStopSleep
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOA
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOB
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOC
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOD (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOE (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOF (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOG (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOH
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOI (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_SRAM2
* @arg @ref LL_AHB2_GRP1_PERIPH_SRAM3 (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_ADC
* @arg @ref LL_AHB2_GRP1_PERIPH_DCMI (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_AES (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_RNG
* @arg @ref LL_AHB2_GRP1_PERIPH_OSPIM (*)
* @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC1 (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_AHB2_GRP1_DisableClockStopSleep(uint32_t Periphs)
{
CLEAR_BIT(RCC->AHB2SMENR, Periphs);
}
/**
* @}
*/
/** @defgroup BUS_LL_EF_AHB3 AHB3
* @{
*/
/**
* @brief Enable AHB3 peripherals clock.
* @rmtoll AHB3ENR FMCEN LL_AHB3_GRP1_EnableClock\n
* AHB3ENR QSPIEN LL_AHB3_GRP1_EnableClock\n
* AHB3ENR OSPI1EN LL_AHB3_GRP1_EnableClock\n
* AHB3ENR OSPI2EN LL_AHB3_GRP1_EnableClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_OSPI1 (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_OSPI2 (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_AHB3_GRP1_EnableClock(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC->AHB3ENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC->AHB3ENR, Periphs);
(void)tmpreg;
}
/**
* @brief Check if AHB3 peripheral clock is enabled or not
* @rmtoll AHB3ENR FMCEN LL_AHB3_GRP1_IsEnabledClock\n
* AHB3ENR QSPIEN LL_AHB3_GRP1_IsEnabledClock\n
* AHB3ENR OSPI1EN LL_AHB3_GRP1_IsEnabledClock\n
* AHB3ENR OSPI2EN LL_AHB3_GRP1_IsEnabledClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_OSPI1 (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_OSPI2 (*)
*
* (*) value not defined in all devices.
* @retval State of Periphs (1 or 0).
*/
__STATIC_INLINE uint32_t LL_AHB3_GRP1_IsEnabledClock(uint32_t Periphs)
{
return (READ_BIT(RCC->AHB3ENR, Periphs) == Periphs);
}
/**
* @brief Disable AHB3 peripherals clock.
* @rmtoll AHB3ENR FMCEN LL_AHB3_GRP1_DisableClock\n
* AHB3ENR QSPIEN LL_AHB3_GRP1_DisableClock\n
* AHB3ENR OSPI1EN LL_AHB3_GRP1_DisableClock\n
* AHB3ENR OSPI2EN LL_AHB3_GRP1_DisableClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_OSPI1 (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_OSPI2 (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_AHB3_GRP1_DisableClock(uint32_t Periphs)
{
CLEAR_BIT(RCC->AHB3ENR, Periphs);
}
/**
* @brief Force AHB3 peripherals reset.
* @rmtoll AHB3RSTR FMCRST LL_AHB3_GRP1_ForceReset\n
* AHB3RSTR QSPIRST LL_AHB3_GRP1_ForceReset\n
* AHB3RSTR OSPI1RST LL_AHB3_GRP1_ForceReset\n
* AHB3RSTR OSPI2RST LL_AHB3_GRP1_ForceReset
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB3_GRP1_PERIPH_ALL
* @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_OSPI1 (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_OSPI2 (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_AHB3_GRP1_ForceReset(uint32_t Periphs)
{
SET_BIT(RCC->AHB3RSTR, Periphs);
}
/**
* @brief Release AHB3 peripherals reset.
* @rmtoll AHB3RSTR FMCRST LL_AHB3_GRP1_ReleaseReset\n
* AHB3RSTR QSPIRST LL_AHB3_GRP1_ReleaseReset\n
* AHB3RSTR OSPI1RST LL_AHB3_GRP1_ReleaseReset\n
* AHB3RSTR OSPI2RST LL_AHB3_GRP1_ReleaseReset
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB2_GRP1_PERIPH_ALL
* @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_OSPI1 (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_OSPI2 (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_AHB3_GRP1_ReleaseReset(uint32_t Periphs)
{
CLEAR_BIT(RCC->AHB3RSTR, Periphs);
}
/**
* @brief Enable AHB3 peripheral clocks in Sleep and Stop modes
* @rmtoll AHB3SMENR FMCSMEN LL_AHB3_GRP1_EnableClockStopSleep\n
* AHB3SMENR QSPISMEN LL_AHB3_GRP1_EnableClockStopSleep\n
* AHB3SMENR OSPI1SMEN LL_AHB3_GRP1_EnableClockStopSleep\n
* AHB3SMENR OSPI2SMEN LL_AHB3_GRP1_EnableClockStopSleep
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_OSPI1 (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_OSPI2 (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_AHB3_GRP1_EnableClockStopSleep(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC->AHB3SMENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC->AHB3SMENR, Periphs);
(void)tmpreg;
}
/**
* @brief Disable AHB3 peripheral clocks in Sleep and Stop modes
* @rmtoll AHB3SMENR FMCSMEN LL_AHB3_GRP1_DisableClockStopSleep\n
* AHB3SMENR QSPISMEN LL_AHB3_GRP1_DisableClockStopSleep\n
* AHB3SMENR OSPI1SMEN LL_AHB3_GRP1_DisableClockStopSleep\n
* AHB3SMENR OSPI2SMEN LL_AHB3_GRP1_DisableClockStopSleep\n
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_OSPI1 (*)
* @arg @ref LL_AHB3_GRP1_PERIPH_OSPI2 (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_AHB3_GRP1_DisableClockStopSleep(uint32_t Periphs)
{
CLEAR_BIT(RCC->AHB3SMENR, Periphs);
}
/**
* @}
*/
/** @defgroup BUS_LL_EF_APB1 APB1
* @{
*/
/**
* @brief Enable APB1 peripherals clock.
* @rmtoll APB1ENR1 TIM2EN LL_APB1_GRP1_EnableClock\n
* APB1ENR1 TIM3EN LL_APB1_GRP1_EnableClock\n
* APB1ENR1 TIM4EN LL_APB1_GRP1_EnableClock\n
* APB1ENR1 TIM5EN LL_APB1_GRP1_EnableClock\n
* APB1ENR1 TIM6EN LL_APB1_GRP1_EnableClock\n
* APB1ENR1 TIM7EN LL_APB1_GRP1_EnableClock\n
* APB1ENR1 LCDEN LL_APB1_GRP1_EnableClock\n
* APB1ENR1 RTCAPBEN LL_APB1_GRP1_EnableClock\n
* APB1ENR1 WWDGEN LL_APB1_GRP1_EnableClock\n
* APB1ENR1 SPI2EN LL_APB1_GRP1_EnableClock\n
* APB1ENR1 SPI3EN LL_APB1_GRP1_EnableClock\n
* APB1ENR1 USART2EN LL_APB1_GRP1_EnableClock\n
* APB1ENR1 USART3EN LL_APB1_GRP1_EnableClock\n
* APB1ENR1 UART4EN LL_APB1_GRP1_EnableClock\n
* APB1ENR1 UART5EN LL_APB1_GRP1_EnableClock\n
* APB1ENR1 I2C1EN LL_APB1_GRP1_EnableClock\n
* APB1ENR1 I2C2EN LL_APB1_GRP1_EnableClock\n
* APB1ENR1 I2C3EN LL_APB1_GRP1_EnableClock\n
* APB1ENR1 CRSEN LL_APB1_GRP1_EnableClock\n
* APB1ENR1 CAN1EN LL_APB1_GRP1_EnableClock\n
* APB1ENR1 USBFSEN LL_APB1_GRP1_EnableClock\n
* APB1ENR1 CAN2EN LL_APB1_GRP1_EnableClock\n
* APB1ENR1 PWREN LL_APB1_GRP1_EnableClock\n
* APB1ENR1 DAC1EN LL_APB1_GRP1_EnableClock\n
* APB1ENR1 OPAMPEN LL_APB1_GRP1_EnableClock\n
* APB1ENR1 LPTIM1EN LL_APB1_GRP1_EnableClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP1_PERIPH_TIM2
* @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM5 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM6
* @arg @ref LL_APB1_GRP1_PERIPH_TIM7
* @arg @ref LL_APB1_GRP1_PERIPH_LCD (*)
* @arg @ref LL_APB1_GRP1_PERIPH_RTCAPB (*)
* @arg @ref LL_APB1_GRP1_PERIPH_WWDG
* @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_SPI3
* @arg @ref LL_APB1_GRP1_PERIPH_USART2
* @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_I2C1
* @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_I2C3
* @arg @ref LL_APB1_GRP1_PERIPH_CRS (*)
* @arg @ref LL_APB1_GRP1_PERIPH_CAN1
* @arg @ref LL_APB1_GRP1_PERIPH_CAN2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_USB (*)
* @arg @ref LL_APB1_GRP1_PERIPH_PWR
* @arg @ref LL_APB1_GRP1_PERIPH_DAC1
* @arg @ref LL_APB1_GRP1_PERIPH_OPAMP
* @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB1_GRP1_EnableClock(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC->APB1ENR1, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC->APB1ENR1, Periphs);
(void)tmpreg;
}
/**
* @brief Enable APB1 peripherals clock.
* @rmtoll APB1ENR2 LPUART1EN LL_APB1_GRP2_EnableClock\n
* APB1ENR2 I2C4EN LL_APB1_GRP2_EnableClock\n
* APB1ENR2 SWPMI1EN LL_APB1_GRP2_EnableClock\n
* APB1ENR2 LPTIM2EN LL_APB1_GRP2_EnableClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP2_PERIPH_LPUART1
* @arg @ref LL_APB1_GRP2_PERIPH_I2C4 (*)
* @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1 (*)
* @arg @ref LL_APB1_GRP2_PERIPH_LPTIM2
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB1_GRP2_EnableClock(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC->APB1ENR2, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC->APB1ENR2, Periphs);
(void)tmpreg;
}
/**
* @brief Check if APB1 peripheral clock is enabled or not
* @rmtoll APB1ENR1 TIM2EN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR1 TIM3EN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR1 TIM4EN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR1 TIM5EN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR1 TIM6EN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR1 TIM7EN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR1 LCDEN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR1 RTCAPBEN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR1 WWDGEN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR1 SPI2EN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR1 SPI3EN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR1 USART2EN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR1 USART3EN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR1 UART4EN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR1 UART5EN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR1 I2C1EN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR1 I2C2EN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR1 I2C3EN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR1 CRSEN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR1 CAN1EN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR1 USBFSEN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR1 CAN2EN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR1 PWREN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR1 DAC1EN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR1 OPAMPEN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR1 LPTIM1EN LL_APB1_GRP1_IsEnabledClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP1_PERIPH_TIM2
* @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM5 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM6
* @arg @ref LL_APB1_GRP1_PERIPH_TIM7
* @arg @ref LL_APB1_GRP1_PERIPH_LCD (*)
* @arg @ref LL_APB1_GRP1_PERIPH_RTCAPB (*)
* @arg @ref LL_APB1_GRP1_PERIPH_WWDG
* @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_SPI3
* @arg @ref LL_APB1_GRP1_PERIPH_USART2
* @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_I2C1
* @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_I2C3
* @arg @ref LL_APB1_GRP1_PERIPH_CRS (*)
* @arg @ref LL_APB1_GRP1_PERIPH_CAN1
* @arg @ref LL_APB1_GRP1_PERIPH_CAN2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_USB (*)
* @arg @ref LL_APB1_GRP1_PERIPH_PWR
* @arg @ref LL_APB1_GRP1_PERIPH_DAC1
* @arg @ref LL_APB1_GRP1_PERIPH_OPAMP
* @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1
*
* (*) value not defined in all devices.
* @retval State of Periphs (1 or 0).
*/
__STATIC_INLINE uint32_t LL_APB1_GRP1_IsEnabledClock(uint32_t Periphs)
{
return (READ_BIT(RCC->APB1ENR1, Periphs) == Periphs);
}
/**
* @brief Check if APB1 peripheral clock is enabled or not
* @rmtoll APB1ENR2 LPUART1EN LL_APB1_GRP2_IsEnabledClock\n
* APB1ENR2 I2C4EN LL_APB1_GRP2_IsEnabledClock\n
* APB1ENR2 SWPMI1EN LL_APB1_GRP2_IsEnabledClock\n
* APB1ENR2 LPTIM2EN LL_APB1_GRP2_IsEnabledClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP2_PERIPH_LPUART1
* @arg @ref LL_APB1_GRP2_PERIPH_I2C4 (*)
* @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1 (*)
* @arg @ref LL_APB1_GRP2_PERIPH_LPTIM2
*
* (*) value not defined in all devices.
* @retval State of Periphs (1 or 0).
*/
__STATIC_INLINE uint32_t LL_APB1_GRP2_IsEnabledClock(uint32_t Periphs)
{
return (READ_BIT(RCC->APB1ENR2, Periphs) == Periphs);
}
/**
* @brief Disable APB1 peripherals clock.
* @rmtoll APB1ENR1 TIM2EN LL_APB1_GRP1_DisableClock\n
* APB1ENR1 TIM3EN LL_APB1_GRP1_DisableClock\n
* APB1ENR1 TIM4EN LL_APB1_GRP1_DisableClock\n
* APB1ENR1 TIM5EN LL_APB1_GRP1_DisableClock\n
* APB1ENR1 TIM6EN LL_APB1_GRP1_DisableClock\n
* APB1ENR1 TIM7EN LL_APB1_GRP1_DisableClock\n
* APB1ENR1 LCDEN LL_APB1_GRP1_DisableClock\n
* APB1ENR1 RTCAPBEN LL_APB1_GRP1_DisableClock\n
* APB1ENR1 WWDGEN LL_APB1_GRP1_DisableClock\n
* APB1ENR1 SPI2EN LL_APB1_GRP1_DisableClock\n
* APB1ENR1 SPI3EN LL_APB1_GRP1_DisableClock\n
* APB1ENR1 USART2EN LL_APB1_GRP1_DisableClock\n
* APB1ENR1 USART3EN LL_APB1_GRP1_DisableClock\n
* APB1ENR1 UART4EN LL_APB1_GRP1_DisableClock\n
* APB1ENR1 UART5EN LL_APB1_GRP1_DisableClock\n
* APB1ENR1 I2C1EN LL_APB1_GRP1_DisableClock\n
* APB1ENR1 I2C2EN LL_APB1_GRP1_DisableClock\n
* APB1ENR1 I2C3EN LL_APB1_GRP1_DisableClock\n
* APB1ENR1 CRSEN LL_APB1_GRP1_DisableClock\n
* APB1ENR1 CAN1EN LL_APB1_GRP1_DisableClock\n
* APB1ENR1 USBFSEN LL_APB1_GRP1_DisableClock\n
* APB1ENR1 CAN2EN LL_APB1_GRP1_DisableClock\n
* APB1ENR1 PWREN LL_APB1_GRP1_DisableClock\n
* APB1ENR1 DAC1EN LL_APB1_GRP1_DisableClock\n
* APB1ENR1 OPAMPEN LL_APB1_GRP1_DisableClock\n
* APB1ENR1 LPTIM1EN LL_APB1_GRP1_DisableClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP1_PERIPH_TIM2
* @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM5 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM6
* @arg @ref LL_APB1_GRP1_PERIPH_TIM7
* @arg @ref LL_APB1_GRP1_PERIPH_LCD (*)
* @arg @ref LL_APB1_GRP1_PERIPH_RTCAPB (*)
* @arg @ref LL_APB1_GRP1_PERIPH_WWDG
* @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_SPI3
* @arg @ref LL_APB1_GRP1_PERIPH_USART2
* @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_I2C1
* @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_I2C3
* @arg @ref LL_APB1_GRP1_PERIPH_CRS (*)
* @arg @ref LL_APB1_GRP1_PERIPH_CAN1
* @arg @ref LL_APB1_GRP1_PERIPH_CAN2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_USB (*)
* @arg @ref LL_APB1_GRP1_PERIPH_PWR
* @arg @ref LL_APB1_GRP1_PERIPH_DAC1
* @arg @ref LL_APB1_GRP1_PERIPH_OPAMP
* @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB1_GRP1_DisableClock(uint32_t Periphs)
{
CLEAR_BIT(RCC->APB1ENR1, Periphs);
}
/**
* @brief Disable APB1 peripherals clock.
* @rmtoll APB1ENR2 LPUART1EN LL_APB1_GRP2_DisableClock\n
* APB1ENR2 I2C4EN LL_APB1_GRP2_DisableClock\n
* APB1ENR2 SWPMI1EN LL_APB1_GRP2_DisableClock\n
* APB1ENR2 LPTIM2EN LL_APB1_GRP2_DisableClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP2_PERIPH_LPUART1
* @arg @ref LL_APB1_GRP2_PERIPH_I2C4 (*)
* @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1 (*)
* @arg @ref LL_APB1_GRP2_PERIPH_LPTIM2
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB1_GRP2_DisableClock(uint32_t Periphs)
{
CLEAR_BIT(RCC->APB1ENR2, Periphs);
}
/**
* @brief Force APB1 peripherals reset.
* @rmtoll APB1RSTR1 TIM2RST LL_APB1_GRP1_ForceReset\n
* APB1RSTR1 TIM3RST LL_APB1_GRP1_ForceReset\n
* APB1RSTR1 TIM4RST LL_APB1_GRP1_ForceReset\n
* APB1RSTR1 TIM5RST LL_APB1_GRP1_ForceReset\n
* APB1RSTR1 TIM6RST LL_APB1_GRP1_ForceReset\n
* APB1RSTR1 TIM7RST LL_APB1_GRP1_ForceReset\n
* APB1RSTR1 LCDRST LL_APB1_GRP1_ForceReset\n
* APB1RSTR1 SPI2RST LL_APB1_GRP1_ForceReset\n
* APB1RSTR1 SPI3RST LL_APB1_GRP1_ForceReset\n
* APB1RSTR1 USART2RST LL_APB1_GRP1_ForceReset\n
* APB1RSTR1 USART3RST LL_APB1_GRP1_ForceReset\n
* APB1RSTR1 UART4RST LL_APB1_GRP1_ForceReset\n
* APB1RSTR1 UART5RST LL_APB1_GRP1_ForceReset\n
* APB1RSTR1 I2C1RST LL_APB1_GRP1_ForceReset\n
* APB1RSTR1 I2C2RST LL_APB1_GRP1_ForceReset\n
* APB1RSTR1 I2C3RST LL_APB1_GRP1_ForceReset\n
* APB1RSTR1 CRSRST LL_APB1_GRP1_ForceReset\n
* APB1RSTR1 CAN1RST LL_APB1_GRP1_ForceReset\n
* APB1RSTR1 USBFSRST LL_APB1_GRP1_ForceReset\n
* APB1RSTR1 CAN2RST LL_APB1_GRP1_ForceReset\n
* APB1RSTR1 PWRRST LL_APB1_GRP1_ForceReset\n
* APB1RSTR1 DAC1RST LL_APB1_GRP1_ForceReset\n
* APB1RSTR1 OPAMPRST LL_APB1_GRP1_ForceReset\n
* APB1RSTR1 LPTIM1RST LL_APB1_GRP1_ForceReset
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP1_PERIPH_ALL
* @arg @ref LL_APB1_GRP1_PERIPH_TIM2
* @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM5 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM6
* @arg @ref LL_APB1_GRP1_PERIPH_TIM7
* @arg @ref LL_APB1_GRP1_PERIPH_LCD (*)
* @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_SPI3
* @arg @ref LL_APB1_GRP1_PERIPH_USART2
* @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_I2C1
* @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_I2C3
* @arg @ref LL_APB1_GRP1_PERIPH_CRS (*)
* @arg @ref LL_APB1_GRP1_PERIPH_CAN1
* @arg @ref LL_APB1_GRP1_PERIPH_CAN2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_USB (*)
* @arg @ref LL_APB1_GRP1_PERIPH_PWR
* @arg @ref LL_APB1_GRP1_PERIPH_DAC1
* @arg @ref LL_APB1_GRP1_PERIPH_OPAMP
* @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB1_GRP1_ForceReset(uint32_t Periphs)
{
SET_BIT(RCC->APB1RSTR1, Periphs);
}
/**
* @brief Force APB1 peripherals reset.
* @rmtoll APB1RSTR2 LPUART1RST LL_APB1_GRP2_ForceReset\n
* APB1RSTR2 I2C4RST LL_APB1_GRP2_ForceReset\n
* APB1RSTR2 SWPMI1RST LL_APB1_GRP2_ForceReset\n
* APB1RSTR2 LPTIM2RST LL_APB1_GRP2_ForceReset
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP2_PERIPH_ALL
* @arg @ref LL_APB1_GRP2_PERIPH_LPUART1
* @arg @ref LL_APB1_GRP2_PERIPH_I2C4 (*)
* @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1 (*)
* @arg @ref LL_APB1_GRP2_PERIPH_LPTIM2
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB1_GRP2_ForceReset(uint32_t Periphs)
{
SET_BIT(RCC->APB1RSTR2, Periphs);
}
/**
* @brief Release APB1 peripherals reset.
* @rmtoll APB1RSTR1 TIM2RST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR1 TIM3RST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR1 TIM4RST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR1 TIM5RST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR1 TIM6RST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR1 TIM7RST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR1 LCDRST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR1 SPI2RST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR1 SPI3RST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR1 USART2RST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR1 USART3RST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR1 UART4RST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR1 UART5RST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR1 I2C1RST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR1 I2C2RST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR1 I2C3RST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR1 CRSRST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR1 CAN1RST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR1 USBFSRST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR1 CAN2RST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR1 PWRRST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR1 DAC1RST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR1 OPAMPRST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR1 LPTIM1RST LL_APB1_GRP1_ReleaseReset
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP1_PERIPH_ALL
* @arg @ref LL_APB1_GRP1_PERIPH_TIM2
* @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM5 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM6
* @arg @ref LL_APB1_GRP1_PERIPH_TIM7
* @arg @ref LL_APB1_GRP1_PERIPH_LCD (*)
* @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_SPI3
* @arg @ref LL_APB1_GRP1_PERIPH_USART2
* @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_I2C1
* @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_I2C3
* @arg @ref LL_APB1_GRP1_PERIPH_CRS (*)
* @arg @ref LL_APB1_GRP1_PERIPH_CAN1
* @arg @ref LL_APB1_GRP1_PERIPH_CAN2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_USB (*)
* @arg @ref LL_APB1_GRP1_PERIPH_PWR
* @arg @ref LL_APB1_GRP1_PERIPH_DAC1
* @arg @ref LL_APB1_GRP1_PERIPH_OPAMP
* @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB1_GRP1_ReleaseReset(uint32_t Periphs)
{
CLEAR_BIT(RCC->APB1RSTR1, Periphs);
}
/**
* @brief Release APB1 peripherals reset.
* @rmtoll APB1RSTR2 LPUART1RST LL_APB1_GRP2_ReleaseReset\n
* APB1RSTR2 I2C4RST LL_APB1_GRP2_ReleaseReset\n
* APB1RSTR2 SWPMI1RST LL_APB1_GRP2_ReleaseReset\n
* APB1RSTR2 LPTIM2RST LL_APB1_GRP2_ReleaseReset
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP2_PERIPH_ALL
* @arg @ref LL_APB1_GRP2_PERIPH_LPUART1
* @arg @ref LL_APB1_GRP2_PERIPH_I2C4 (*)
* @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1 (*)
* @arg @ref LL_APB1_GRP2_PERIPH_LPTIM2
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB1_GRP2_ReleaseReset(uint32_t Periphs)
{
CLEAR_BIT(RCC->APB1RSTR2, Periphs);
}
/**
* @brief Enable APB1 peripheral clocks in Sleep and Stop modes
* @rmtoll APB1SMENR1 TIM2SMEN LL_APB1_GRP1_EnableClockStopSleep\n
* APB1SMENR1 TIM3SMEN LL_APB1_GRP1_EnableClockStopSleep\n
* APB1SMENR1 TIM4SMEN LL_APB1_GRP1_EnableClockStopSleep\n
* APB1SMENR1 TIM5SMEN LL_APB1_GRP1_EnableClockStopSleep\n
* APB1SMENR1 TIM6SMEN LL_APB1_GRP1_EnableClockStopSleep\n
* APB1SMENR1 TIM7SMEN LL_APB1_GRP1_EnableClockStopSleep\n
* APB1SMENR1 LCDSMEN LL_APB1_GRP1_EnableClockStopSleep\n
* APB1SMENR1 RTCAPBSMEN LL_APB1_GRP1_EnableClockStopSleep\n
* APB1SMENR1 WWDGSMEN LL_APB1_GRP1_EnableClockStopSleep\n
* APB1SMENR1 SPI2SMEN LL_APB1_GRP1_EnableClockStopSleep\n
* APB1SMENR1 SPI3SMEN LL_APB1_GRP1_EnableClockStopSleep\n
* APB1SMENR1 USART2SMEN LL_APB1_GRP1_EnableClockStopSleep\n
* APB1SMENR1 USART3SMEN LL_APB1_GRP1_EnableClockStopSleep\n
* APB1SMENR1 UART4SMEN LL_APB1_GRP1_EnableClockStopSleep\n
* APB1SMENR1 UART5SMEN LL_APB1_GRP1_EnableClockStopSleep\n
* APB1SMENR1 I2C1SMEN LL_APB1_GRP1_EnableClockStopSleep\n
* APB1SMENR1 I2C2SMEN LL_APB1_GRP1_EnableClockStopSleep\n
* APB1SMENR1 I2C3SMEN LL_APB1_GRP1_EnableClockStopSleep\n
* APB1SMENR1 CRSSMEN LL_APB1_GRP1_EnableClockStopSleep\n
* APB1SMENR1 CAN1SMEN LL_APB1_GRP1_EnableClockStopSleep\n
* APB1SMENR1 USBFSSMEN LL_APB1_GRP1_EnableClockStopSleep\n
* APB1SMENR1 CAN2SMEN LL_APB1_GRP1_EnableClockStopSleep\n
* APB1SMENR1 PWRSMEN LL_APB1_GRP1_EnableClockStopSleep\n
* APB1SMENR1 DAC1SMEN LL_APB1_GRP1_EnableClockStopSleep\n
* APB1SMENR1 OPAMPSMEN LL_APB1_GRP1_EnableClockStopSleep\n
* APB1SMENR1 LPTIM1SMEN LL_APB1_GRP1_EnableClockStopSleep
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP1_PERIPH_TIM2
* @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM5 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM6
* @arg @ref LL_APB1_GRP1_PERIPH_TIM7
* @arg @ref LL_APB1_GRP1_PERIPH_LCD (*)
* @arg @ref LL_APB1_GRP1_PERIPH_RTCAPB (*)
* @arg @ref LL_APB1_GRP1_PERIPH_WWDG
* @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_SPI3
* @arg @ref LL_APB1_GRP1_PERIPH_USART2
* @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_I2C1
* @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_I2C3
* @arg @ref LL_APB1_GRP1_PERIPH_CRS (*)
* @arg @ref LL_APB1_GRP1_PERIPH_CAN1
* @arg @ref LL_APB1_GRP1_PERIPH_CAN2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_USB (*)
* @arg @ref LL_APB1_GRP1_PERIPH_PWR
* @arg @ref LL_APB1_GRP1_PERIPH_DAC1
* @arg @ref LL_APB1_GRP1_PERIPH_OPAMP
* @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB1_GRP1_EnableClockStopSleep(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC->APB1SMENR1, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC->APB1SMENR1, Periphs);
(void)tmpreg;
}
/**
* @brief Enable APB1 peripheral clocks in Sleep and Stop modes
* @rmtoll APB1SMENR2 LPUART1SMEN LL_APB1_GRP2_EnableClockStopSleep\n
* APB1SMENR2 I2C4SMEN LL_APB1_GRP2_EnableClockStopSleep\n
* APB1SMENR2 SWPMI1SMEN LL_APB1_GRP2_EnableClockStopSleep\n
* APB1SMENR2 LPTIM2SMEN LL_APB1_GRP2_EnableClockStopSleep
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP2_PERIPH_LPUART1
* @arg @ref LL_APB1_GRP2_PERIPH_I2C4 (*)
* @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1 (*)
* @arg @ref LL_APB1_GRP2_PERIPH_LPTIM2
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB1_GRP2_EnableClockStopSleep(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC->APB1SMENR2, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC->APB1SMENR2, Periphs);
(void)tmpreg;
}
/**
* @brief Disable APB1 peripheral clocks in Sleep and Stop modes
* @rmtoll APB1SMENR1 TIM2SMEN LL_APB1_GRP1_DisableClockStopSleep\n
* APB1SMENR1 TIM3SMEN LL_APB1_GRP1_DisableClockStopSleep\n
* APB1SMENR1 TIM4SMEN LL_APB1_GRP1_DisableClockStopSleep\n
* APB1SMENR1 TIM5SMEN LL_APB1_GRP1_DisableClockStopSleep\n
* APB1SMENR1 TIM6SMEN LL_APB1_GRP1_DisableClockStopSleep\n
* APB1SMENR1 TIM7SMEN LL_APB1_GRP1_DisableClockStopSleep\n
* APB1SMENR1 LCDSMEN LL_APB1_GRP1_DisableClockStopSleep\n
* APB1SMENR1 RTCAPBSMEN LL_APB1_GRP1_DisableClockStopSleep\n
* APB1SMENR1 WWDGSMEN LL_APB1_GRP1_DisableClockStopSleep\n
* APB1SMENR1 SPI2SMEN LL_APB1_GRP1_DisableClockStopSleep\n
* APB1SMENR1 SPI3SMEN LL_APB1_GRP1_DisableClockStopSleep\n
* APB1SMENR1 USART2SMEN LL_APB1_GRP1_DisableClockStopSleep\n
* APB1SMENR1 USART3SMEN LL_APB1_GRP1_DisableClockStopSleep\n
* APB1SMENR1 UART4SMEN LL_APB1_GRP1_DisableClockStopSleep\n
* APB1SMENR1 UART5SMEN LL_APB1_GRP1_DisableClockStopSleep\n
* APB1SMENR1 I2C1SMEN LL_APB1_GRP1_DisableClockStopSleep\n
* APB1SMENR1 I2C2SMEN LL_APB1_GRP1_DisableClockStopSleep\n
* APB1SMENR1 I2C3SMEN LL_APB1_GRP1_DisableClockStopSleep\n
* APB1SMENR1 CRSSMEN LL_APB1_GRP1_DisableClockStopSleep\n
* APB1SMENR1 CAN1SMEN LL_APB1_GRP1_DisableClockStopSleep\n
* APB1SMENR1 USBFSSMEN LL_APB1_GRP1_DisableClockStopSleep\n
* APB1SMENR1 CAN2SMEN LL_APB1_GRP1_DisableClockStopSleep\n
* APB1SMENR1 PWRSMEN LL_APB1_GRP1_DisableClockStopSleep\n
* APB1SMENR1 DAC1SMEN LL_APB1_GRP1_DisableClockStopSleep\n
* APB1SMENR1 OPAMPSMEN LL_APB1_GRP1_DisableClockStopSleep\n
* APB1SMENR1 LPTIM1SMEN LL_APB1_GRP1_DisableClockStopSleep
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP1_PERIPH_TIM2
* @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM5 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM6
* @arg @ref LL_APB1_GRP1_PERIPH_TIM7
* @arg @ref LL_APB1_GRP1_PERIPH_LCD (*)
* @arg @ref LL_APB1_GRP1_PERIPH_RTCAPB (*)
* @arg @ref LL_APB1_GRP1_PERIPH_WWDG
* @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_SPI3
* @arg @ref LL_APB1_GRP1_PERIPH_USART2
* @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_I2C1
* @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_I2C3
* @arg @ref LL_APB1_GRP1_PERIPH_CRS (*)
* @arg @ref LL_APB1_GRP1_PERIPH_CAN1
* @arg @ref LL_APB1_GRP1_PERIPH_CAN2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_USB (*)
* @arg @ref LL_APB1_GRP1_PERIPH_PWR
* @arg @ref LL_APB1_GRP1_PERIPH_DAC1
* @arg @ref LL_APB1_GRP1_PERIPH_OPAMP
* @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB1_GRP1_DisableClockStopSleep(uint32_t Periphs)
{
CLEAR_BIT(RCC->APB1SMENR1, Periphs);
}
/**
* @brief Disable APB1 peripheral clocks in Sleep and Stop modes
* @rmtoll APB1SMENR2 LPUART1SMEN LL_APB1_GRP2_DisableClockStopSleep\n
* APB1SMENR2 I2C4SMEN LL_APB1_GRP2_DisableClockStopSleep\n
* APB1SMENR2 SWPMI1SMEN LL_APB1_GRP2_DisableClockStopSleep\n
* APB1SMENR2 LPTIM2SMEN LL_APB1_GRP2_DisableClockStopSleep
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP2_PERIPH_LPUART1
* @arg @ref LL_APB1_GRP2_PERIPH_I2C4 (*)
* @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1 (*)
* @arg @ref LL_APB1_GRP2_PERIPH_LPTIM2
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB1_GRP2_DisableClockStopSleep(uint32_t Periphs)
{
CLEAR_BIT(RCC->APB1SMENR2, Periphs);
}
/**
* @}
*/
/** @defgroup BUS_LL_EF_APB2 APB2
* @{
*/
/**
* @brief Enable APB2 peripherals clock.
* @rmtoll APB2ENR SYSCFGEN LL_APB2_GRP1_EnableClock\n
* APB2ENR FWEN LL_APB2_GRP1_EnableClock\n
* APB2ENR SDMMC1EN LL_APB2_GRP1_EnableClock\n
* APB2ENR TIM1EN LL_APB2_GRP1_EnableClock\n
* APB2ENR SPI1EN LL_APB2_GRP1_EnableClock\n
* APB2ENR TIM8EN LL_APB2_GRP1_EnableClock\n
* APB2ENR USART1EN LL_APB2_GRP1_EnableClock\n
* APB2ENR TIM15EN LL_APB2_GRP1_EnableClock\n
* APB2ENR TIM16EN LL_APB2_GRP1_EnableClock\n
* APB2ENR TIM17EN LL_APB2_GRP1_EnableClock\n
* APB2ENR SAI1EN LL_APB2_GRP1_EnableClock\n
* APB2ENR SAI2EN LL_APB2_GRP1_EnableClock\n
* APB2ENR DFSDM1EN LL_APB2_GRP1_EnableClock\n
* APB2ENR LTDCEN LL_APB2_GRP1_EnableClock\n
* APB2ENR DSIEN LL_APB2_GRP1_EnableClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG
* @arg @ref LL_APB2_GRP1_PERIPH_FW
* @arg @ref LL_APB2_GRP1_PERIPH_SDMMC1 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_TIM1
* @arg @ref LL_APB2_GRP1_PERIPH_SPI1
* @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_USART1
* @arg @ref LL_APB2_GRP1_PERIPH_TIM15
* @arg @ref LL_APB2_GRP1_PERIPH_TIM16
* @arg @ref LL_APB2_GRP1_PERIPH_TIM17 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_SAI1
* @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_LTDC (*)
* @arg @ref LL_APB2_GRP1_PERIPH_DSI (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB2_GRP1_EnableClock(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC->APB2ENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC->APB2ENR, Periphs);
(void)tmpreg;
}
/**
* @brief Check if APB2 peripheral clock is enabled or not
* @rmtoll APB2ENR SYSCFGEN LL_APB2_GRP1_IsEnabledClock\n
* APB2ENR FWEN LL_APB2_GRP1_IsEnabledClock\n
* APB2ENR SDMMC1EN LL_APB2_GRP1_IsEnabledClock\n
* APB2ENR TIM1EN LL_APB2_GRP1_IsEnabledClock\n
* APB2ENR SPI1EN LL_APB2_GRP1_IsEnabledClock\n
* APB2ENR TIM8EN LL_APB2_GRP1_IsEnabledClock\n
* APB2ENR USART1EN LL_APB2_GRP1_IsEnabledClock\n
* APB2ENR TIM15EN LL_APB2_GRP1_IsEnabledClock\n
* APB2ENR TIM16EN LL_APB2_GRP1_IsEnabledClock\n
* APB2ENR TIM17EN LL_APB2_GRP1_IsEnabledClock\n
* APB2ENR SAI1EN LL_APB2_GRP1_IsEnabledClock\n
* APB2ENR SAI2EN LL_APB2_GRP1_IsEnabledClock\n
* APB2ENR DFSDM1EN LL_APB2_GRP1_IsEnabledClock\n
* APB2ENR LTDCEN LL_APB2_GRP1_IsEnabledClock\n
* APB2ENR DSIEN LL_APB2_GRP1_IsEnabledClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG
* @arg @ref LL_APB2_GRP1_PERIPH_FW
* @arg @ref LL_APB2_GRP1_PERIPH_SDMMC1 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_TIM1
* @arg @ref LL_APB2_GRP1_PERIPH_SPI1
* @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_USART1
* @arg @ref LL_APB2_GRP1_PERIPH_TIM15
* @arg @ref LL_APB2_GRP1_PERIPH_TIM16
* @arg @ref LL_APB2_GRP1_PERIPH_TIM17 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_SAI1
* @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_LTDC (*)
* @arg @ref LL_APB2_GRP1_PERIPH_DSI (*)
*
* (*) value not defined in all devices.
* @retval State of Periphs (1 or 0).
*/
__STATIC_INLINE uint32_t LL_APB2_GRP1_IsEnabledClock(uint32_t Periphs)
{
return (READ_BIT(RCC->APB2ENR, Periphs) == Periphs);
}
/**
* @brief Disable APB2 peripherals clock.
* @rmtoll APB2ENR SYSCFGEN LL_APB2_GRP1_DisableClock\n
* APB2ENR SDMMC1EN LL_APB2_GRP1_DisableClock\n
* APB2ENR TIM1EN LL_APB2_GRP1_DisableClock\n
* APB2ENR SPI1EN LL_APB2_GRP1_DisableClock\n
* APB2ENR TIM8EN LL_APB2_GRP1_DisableClock\n
* APB2ENR USART1EN LL_APB2_GRP1_DisableClock\n
* APB2ENR TIM15EN LL_APB2_GRP1_DisableClock\n
* APB2ENR TIM16EN LL_APB2_GRP1_DisableClock\n
* APB2ENR TIM17EN LL_APB2_GRP1_DisableClock\n
* APB2ENR SAI1EN LL_APB2_GRP1_DisableClock\n
* APB2ENR SAI2EN LL_APB2_GRP1_DisableClock\n
* APB2ENR DFSDM1EN LL_APB2_GRP1_DisableClock\n
* APB2ENR LTDCEN LL_APB2_GRP1_DisableClock\n
* APB2ENR DSIEN LL_APB2_GRP1_DisableClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG
* @arg @ref LL_APB2_GRP1_PERIPH_SDMMC1 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_TIM1
* @arg @ref LL_APB2_GRP1_PERIPH_SPI1
* @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_USART1
* @arg @ref LL_APB2_GRP1_PERIPH_TIM15
* @arg @ref LL_APB2_GRP1_PERIPH_TIM16
* @arg @ref LL_APB2_GRP1_PERIPH_TIM17 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_SAI1
* @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_LTDC (*)
* @arg @ref LL_APB2_GRP1_PERIPH_DSI (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB2_GRP1_DisableClock(uint32_t Periphs)
{
CLEAR_BIT(RCC->APB2ENR, Periphs);
}
/**
* @brief Force APB2 peripherals reset.
* @rmtoll APB2RSTR SYSCFGRST LL_APB2_GRP1_ForceReset\n
* APB2RSTR SDMMC1RST LL_APB2_GRP1_ForceReset\n
* APB2RSTR TIM1RST LL_APB2_GRP1_ForceReset\n
* APB2RSTR SPI1RST LL_APB2_GRP1_ForceReset\n
* APB2RSTR TIM8RST LL_APB2_GRP1_ForceReset\n
* APB2RSTR USART1RST LL_APB2_GRP1_ForceReset\n
* APB2RSTR TIM15RST LL_APB2_GRP1_ForceReset\n
* APB2RSTR TIM16RST LL_APB2_GRP1_ForceReset\n
* APB2RSTR TIM17RST LL_APB2_GRP1_ForceReset\n
* APB2RSTR SAI1RST LL_APB2_GRP1_ForceReset\n
* APB2RSTR SAI2RST LL_APB2_GRP1_ForceReset\n
* APB2RSTR DFSDM1RST LL_APB2_GRP1_ForceReset\n
* APB2RSTR LTDCRST LL_APB2_GRP1_ForceReset\n
* APB2RSTR DSIRST LL_APB2_GRP1_ForceReset
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB2_GRP1_PERIPH_ALL
* @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG
* @arg @ref LL_APB2_GRP1_PERIPH_SDMMC1 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_TIM1
* @arg @ref LL_APB2_GRP1_PERIPH_SPI1
* @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_USART1
* @arg @ref LL_APB2_GRP1_PERIPH_TIM15
* @arg @ref LL_APB2_GRP1_PERIPH_TIM16
* @arg @ref LL_APB2_GRP1_PERIPH_TIM17 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_SAI1
* @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_LTDC (*)
* @arg @ref LL_APB2_GRP1_PERIPH_DSI (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB2_GRP1_ForceReset(uint32_t Periphs)
{
SET_BIT(RCC->APB2RSTR, Periphs);
}
/**
* @brief Release APB2 peripherals reset.
* @rmtoll APB2RSTR SYSCFGRST LL_APB2_GRP1_ReleaseReset\n
* APB2RSTR SDMMC1RST LL_APB2_GRP1_ReleaseReset\n
* APB2RSTR TIM1RST LL_APB2_GRP1_ReleaseReset\n
* APB2RSTR SPI1RST LL_APB2_GRP1_ReleaseReset\n
* APB2RSTR TIM8RST LL_APB2_GRP1_ReleaseReset\n
* APB2RSTR USART1RST LL_APB2_GRP1_ReleaseReset\n
* APB2RSTR TIM15RST LL_APB2_GRP1_ReleaseReset\n
* APB2RSTR TIM16RST LL_APB2_GRP1_ReleaseReset\n
* APB2RSTR TIM17RST LL_APB2_GRP1_ReleaseReset\n
* APB2RSTR SAI1RST LL_APB2_GRP1_ReleaseReset\n
* APB2RSTR SAI2RST LL_APB2_GRP1_ReleaseReset\n
* APB2RSTR DFSDM1RST LL_APB2_GRP1_ReleaseReset\n
* APB2RSTR LTDCRST LL_APB2_GRP1_ReleaseReset\n
* APB2RSTR DSIRST LL_APB2_GRP1_ReleaseReset
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB2_GRP1_PERIPH_ALL
* @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG
* @arg @ref LL_APB2_GRP1_PERIPH_SDMMC1 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_TIM1
* @arg @ref LL_APB2_GRP1_PERIPH_SPI1
* @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_USART1
* @arg @ref LL_APB2_GRP1_PERIPH_TIM15
* @arg @ref LL_APB2_GRP1_PERIPH_TIM16
* @arg @ref LL_APB2_GRP1_PERIPH_TIM17 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_SAI1
* @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_LTDC (*)
* @arg @ref LL_APB2_GRP1_PERIPH_DSI (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB2_GRP1_ReleaseReset(uint32_t Periphs)
{
CLEAR_BIT(RCC->APB2RSTR, Periphs);
}
/**
* @brief Enable APB2 peripheral clocks in Sleep and Stop modes
* @rmtoll APB2SMENR SYSCFGSMEN LL_APB2_GRP1_EnableClockStopSleep\n
* APB2SMENR SDMMC1SMEN LL_APB2_GRP1_EnableClockStopSleep\n
* APB2SMENR TIM1SMEN LL_APB2_GRP1_EnableClockStopSleep\n
* APB2SMENR SPI1SMEN LL_APB2_GRP1_EnableClockStopSleep\n
* APB2SMENR TIM8SMEN LL_APB2_GRP1_EnableClockStopSleep\n
* APB2SMENR USART1SMEN LL_APB2_GRP1_EnableClockStopSleep\n
* APB2SMENR TIM15SMEN LL_APB2_GRP1_EnableClockStopSleep\n
* APB2SMENR TIM16SMEN LL_APB2_GRP1_EnableClockStopSleep\n
* APB2SMENR TIM17SMEN LL_APB2_GRP1_EnableClockStopSleep\n
* APB2SMENR SAI1SMEN LL_APB2_GRP1_EnableClockStopSleep\n
* APB2SMENR SAI2SMEN LL_APB2_GRP1_EnableClockStopSleep\n
* APB2SMENR DFSDM1SMEN LL_APB2_GRP1_EnableClockStopSleep\n
* APB2SMENR LTDCSMEN LL_APB2_GRP1_EnableClockStopSleep\n
* APB2SMENR DSISMEN LL_APB2_GRP1_EnableClockStopSleep
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG
* @arg @ref LL_APB2_GRP1_PERIPH_SDMMC1 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_TIM1
* @arg @ref LL_APB2_GRP1_PERIPH_SPI1
* @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_USART1
* @arg @ref LL_APB2_GRP1_PERIPH_TIM15
* @arg @ref LL_APB2_GRP1_PERIPH_TIM16
* @arg @ref LL_APB2_GRP1_PERIPH_TIM17 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_SAI1
* @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_LTDC (*)
* @arg @ref LL_APB2_GRP1_PERIPH_DSI (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB2_GRP1_EnableClockStopSleep(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC->APB2SMENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC->APB2SMENR, Periphs);
(void)tmpreg;
}
/**
* @brief Disable APB2 peripheral clocks in Sleep and Stop modes
* @rmtoll APB2SMENR SYSCFGSMEN LL_APB2_GRP1_DisableClockStopSleep\n
* APB2SMENR SDMMC1SMEN LL_APB2_GRP1_DisableClockStopSleep\n
* APB2SMENR TIM1SMEN LL_APB2_GRP1_DisableClockStopSleep\n
* APB2SMENR SPI1SMEN LL_APB2_GRP1_DisableClockStopSleep\n
* APB2SMENR TIM8SMEN LL_APB2_GRP1_DisableClockStopSleep\n
* APB2SMENR USART1SMEN LL_APB2_GRP1_DisableClockStopSleep\n
* APB2SMENR TIM15SMEN LL_APB2_GRP1_DisableClockStopSleep\n
* APB2SMENR TIM16SMEN LL_APB2_GRP1_DisableClockStopSleep\n
* APB2SMENR TIM17SMEN LL_APB2_GRP1_DisableClockStopSleep\n
* APB2SMENR SAI1SMEN LL_APB2_GRP1_DisableClockStopSleep\n
* APB2SMENR SAI2SMEN LL_APB2_GRP1_DisableClockStopSleep\n
* APB2SMENR DFSDM1SMEN LL_APB2_GRP1_DisableClockStopSleep\n
* APB2SMENR LTDCSMEN LL_APB2_GRP1_DisableClockStopSleep\n
* APB2SMENR DSISMEN LL_APB2_GRP1_DisableClockStopSleep
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG
* @arg @ref LL_APB2_GRP1_PERIPH_SDMMC1 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_TIM1
* @arg @ref LL_APB2_GRP1_PERIPH_SPI1
* @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_USART1
* @arg @ref LL_APB2_GRP1_PERIPH_TIM15
* @arg @ref LL_APB2_GRP1_PERIPH_TIM16
* @arg @ref LL_APB2_GRP1_PERIPH_TIM17 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_SAI1
* @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_LTDC (*)
* @arg @ref LL_APB2_GRP1_PERIPH_DSI (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB2_GRP1_DisableClockStopSleep(uint32_t Periphs)
{
CLEAR_BIT(RCC->APB2SMENR, Periphs);
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#endif /* defined(RCC) */
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32L4xx_LL_BUS_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
