mbed official
The official Mbed 2 C/C++ SDK provides the software platform and libraries to build your applications.
Dependents: hello SerialTestv11 SerialTestv12 Sierpinski ... more
mbed 2
This is the mbed 2 library. If you'd like to learn about Mbed OS please see the mbed-os docs.
TARGET_NUCLEO_F412ZG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_fmpi2c.h
- Committer:
- AnnaBridge
- Date:
- 2018-11-08
- Revision:
- 171:3a7713b1edbc
- Parent:
- TARGET_DISCO_F413ZH/TARGET_STM/TARGET_STM32F4/device/stm32f4xx_hal_fmpi2c.h@ 163:e59c8e839560
File content as of revision 171:3a7713b1edbc:
/**
******************************************************************************
* @file stm32f4xx_hal_fmpi2c.h
* @author MCD Application Team
* @brief Header file of FMPI2C HAL module.
******************************************************************************
* @attention
*
* <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4xx_HAL_FMPI2C_H
#define __STM32F4xx_HAL_FMPI2C_H
#ifdef __cplusplus
extern "C" {
#endif
#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F446xx) || defined(STM32F412Zx) ||\
defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx)
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_hal_def.h"
/** @addtogroup STM32F4xx_HAL_Driver
* @{
*/
/** @addtogroup FMPI2C
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup FMPI2C_Exported_Types FMPI2C Exported Types
* @{
*/
/** @defgroup FMPI2C_Configuration_Structure_definition FMPI2C Configuration Structure definition
* @brief FMPI2C Configuration Structure definition
* @{
*/
typedef struct
{
uint32_t Timing; /*!< Specifies the FMPI2C_TIMINGR_register value.
This parameter calculated by referring to FMPI2C initialization
section in Reference manual */
uint32_t OwnAddress1; /*!< Specifies the first device own address.
This parameter can be a 7-bit or 10-bit address. */
uint32_t AddressingMode; /*!< Specifies if 7-bit or 10-bit addressing mode is selected.
This parameter can be a value of @ref FMPI2C_ADDRESSING_MODE */
uint32_t DualAddressMode; /*!< Specifies if dual addressing mode is selected.
This parameter can be a value of @ref FMPI2C_DUAL_ADDRESSING_MODE */
uint32_t OwnAddress2; /*!< Specifies the second device own address if dual addressing mode is selected
This parameter can be a 7-bit address. */
uint32_t OwnAddress2Masks; /*!< Specifies the acknowledge mask address second device own address if dual addressing mode is selected
This parameter can be a value of @ref FMPI2C_OWN_ADDRESS2_MASKS */
uint32_t GeneralCallMode; /*!< Specifies if general call mode is selected.
This parameter can be a value of @ref FMPI2C_GENERAL_CALL_ADDRESSING_MODE */
uint32_t NoStretchMode; /*!< Specifies if nostretch mode is selected.
This parameter can be a value of @ref FMPI2C_NOSTRETCH_MODE */
} FMPI2C_InitTypeDef;
/**
* @}
*/
/** @defgroup HAL_state_structure_definition HAL state structure definition
* @brief HAL State structure definition
* @note HAL FMPI2C State value coding follow below described bitmap :\n
* b7-b6 Error information\n
* 00 : No Error\n
* 01 : Abort (Abort user request on going)\n
* 10 : Timeout\n
* 11 : Error\n
* b5 IP initilisation status\n
* 0 : Reset (IP not initialized)\n
* 1 : Init done (IP initialized and ready to use. HAL FMPI2C Init function called)\n
* b4 (not used)\n
* x : Should be set to 0\n
* b3\n
* 0 : Ready or Busy (No Listen mode ongoing)\n
* 1 : Listen (IP in Address Listen Mode)\n
* b2 Intrinsic process state\n
* 0 : Ready\n
* 1 : Busy (IP busy with some configuration or internal operations)\n
* b1 Rx state\n
* 0 : Ready (no Rx operation ongoing)\n
* 1 : Busy (Rx operation ongoing)\n
* b0 Tx state\n
* 0 : Ready (no Tx operation ongoing)\n
* 1 : Busy (Tx operation ongoing)
* @{
*/
typedef enum
{
HAL_FMPI2C_STATE_RESET = 0x00U, /*!< Peripheral is not yet Initialized */
HAL_FMPI2C_STATE_READY = 0x20U, /*!< Peripheral Initialized and ready for use */
HAL_FMPI2C_STATE_BUSY = 0x24U, /*!< An internal process is ongoing */
HAL_FMPI2C_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing */
HAL_FMPI2C_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing */
HAL_FMPI2C_STATE_LISTEN = 0x28U, /*!< Address Listen Mode is ongoing */
HAL_FMPI2C_STATE_BUSY_TX_LISTEN = 0x29U, /*!< Address Listen Mode and Data Transmission
process is ongoing */
HAL_FMPI2C_STATE_BUSY_RX_LISTEN = 0x2AU, /*!< Address Listen Mode and Data Reception
process is ongoing */
HAL_FMPI2C_STATE_ABORT = 0x60U, /*!< Abort user request ongoing */
HAL_FMPI2C_STATE_TIMEOUT = 0xA0U, /*!< Timeout state */
HAL_FMPI2C_STATE_ERROR = 0xE0U /*!< Error */
} HAL_FMPI2C_StateTypeDef;
/**
* @}
*/
/** @defgroup HAL_mode_structure_definition HAL mode structure definition
* @brief HAL Mode structure definition
* @note HAL FMPI2C Mode value coding follow below described bitmap :\n
* b7 (not used)\n
* x : Should be set to 0\n
* b6\n
* 0 : None\n
* 1 : Memory (HAL FMPI2C communication is in Memory Mode)\n
* b5\n
* 0 : None\n
* 1 : Slave (HAL FMPI2C communication is in Slave Mode)\n
* b4\n
* 0 : None\n
* 1 : Master (HAL FMPI2C communication is in Master Mode)\n
* b3-b2-b1-b0 (not used)\n
* xxxx : Should be set to 0000
* @{
*/
typedef enum
{
HAL_FMPI2C_MODE_NONE = 0x00U, /*!< No FMPI2C communication on going */
HAL_FMPI2C_MODE_MASTER = 0x10U, /*!< FMPI2C communication is in Master Mode */
HAL_FMPI2C_MODE_SLAVE = 0x20U, /*!< FMPI2C communication is in Slave Mode */
HAL_FMPI2C_MODE_MEM = 0x40U /*!< FMPI2C communication is in Memory Mode */
} HAL_FMPI2C_ModeTypeDef;
/**
* @}
*/
/** @defgroup FMPI2C_Error_Code_definition FMPI2C Error Code definition
* @brief FMPI2C Error Code definition
* @{
*/
#define HAL_FMPI2C_ERROR_NONE (0x00000000U) /*!< No error */
#define HAL_FMPI2C_ERROR_BERR (0x00000001U) /*!< BERR error */
#define HAL_FMPI2C_ERROR_ARLO (0x00000002U) /*!< ARLO error */
#define HAL_FMPI2C_ERROR_AF (0x00000004U) /*!< ACKF error */
#define HAL_FMPI2C_ERROR_OVR (0x00000008U) /*!< OVR error */
#define HAL_FMPI2C_ERROR_DMA (0x00000010U) /*!< DMA transfer error */
#define HAL_FMPI2C_ERROR_TIMEOUT (0x00000020U) /*!< Timeout error */
#define HAL_FMPI2C_ERROR_SIZE (0x00000040U) /*!< Size Management error */
/**
* @}
*/
/** @defgroup FMPI2C_handle_Structure_definition FMPI2C handle Structure definition
* @brief FMPI2C handle Structure definition
* @{
*/
typedef struct __FMPI2C_HandleTypeDef
{
FMPI2C_TypeDef *Instance; /*!< FMPI2C registers base address */
FMPI2C_InitTypeDef Init; /*!< FMPI2C communication parameters */
uint8_t *pBuffPtr; /*!< Pointer to FMPI2C transfer buffer */
uint16_t XferSize; /*!< FMPI2C transfer size */
__IO uint16_t XferCount; /*!< FMPI2C transfer counter */
__IO uint32_t XferOptions; /*!< FMPI2C sequantial transfer options, this parameter can
be a value of @ref FMPI2C_XFEROPTIONS */
__IO uint32_t PreviousState; /*!< FMPI2C communication Previous state */
HAL_StatusTypeDef(*XferISR)(struct __FMPI2C_HandleTypeDef *hfmpi2c, uint32_t ITFlags, uint32_t ITSources); /*!< FMPI2C transfer IRQ handler function pointer */
DMA_HandleTypeDef *hdmatx; /*!< FMPI2C Tx DMA handle parameters */
DMA_HandleTypeDef *hdmarx; /*!< FMPI2C Rx DMA handle parameters */
HAL_LockTypeDef Lock; /*!< FMPI2C locking object */
__IO HAL_FMPI2C_StateTypeDef State; /*!< FMPI2C communication state */
__IO HAL_FMPI2C_ModeTypeDef Mode; /*!< FMPI2C communication mode */
__IO uint32_t ErrorCode; /*!< FMPI2C Error code */
__IO uint32_t AddrEventCount; /*!< FMPI2C Address Event counter */
} FMPI2C_HandleTypeDef;
/**
* @}
*/
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup FMPI2C_Exported_Constants FMPI2C Exported Constants
* @{
*/
/** @defgroup FMPI2C_XFEROPTIONS FMPI2C Sequential Transfer Options
* @{
*/
#define FMPI2C_FIRST_FRAME ((uint32_t)FMPI2C_SOFTEND_MODE)
#define FMPI2C_FIRST_AND_NEXT_FRAME ((uint32_t)(FMPI2C_RELOAD_MODE | FMPI2C_SOFTEND_MODE))
#define FMPI2C_NEXT_FRAME ((uint32_t)(FMPI2C_RELOAD_MODE | FMPI2C_SOFTEND_MODE))
#define FMPI2C_FIRST_AND_LAST_FRAME ((uint32_t)FMPI2C_AUTOEND_MODE)
#define FMPI2C_LAST_FRAME ((uint32_t)FMPI2C_AUTOEND_MODE)
#define FMPI2C_LAST_FRAME_NO_STOP ((uint32_t)FMPI2C_SOFTEND_MODE)
/**
* @}
*/
/** @defgroup FMPI2C_ADDRESSING_MODE FMPI2C Addressing Mode
* @{
*/
#define FMPI2C_ADDRESSINGMODE_7BIT (0x00000001U)
#define FMPI2C_ADDRESSINGMODE_10BIT (0x00000002U)
/**
* @}
*/
/** @defgroup FMPI2C_DUAL_ADDRESSING_MODE FMPI2C Dual Addressing Mode
* @{
*/
#define FMPI2C_DUALADDRESS_DISABLE (0x00000000U)
#define FMPI2C_DUALADDRESS_ENABLE FMPI2C_OAR2_OA2EN
/**
* @}
*/
/** @defgroup FMPI2C_OWN_ADDRESS2_MASKS FMPI2C Own Address2 Masks
* @{
*/
#define FMPI2C_OA2_NOMASK ((uint8_t)0x00)
#define FMPI2C_OA2_MASK01 ((uint8_t)0x01)
#define FMPI2C_OA2_MASK02 ((uint8_t)0x02)
#define FMPI2C_OA2_MASK03 ((uint8_t)0x03)
#define FMPI2C_OA2_MASK04 ((uint8_t)0x04)
#define FMPI2C_OA2_MASK05 ((uint8_t)0x05)
#define FMPI2C_OA2_MASK06 ((uint8_t)0x06)
#define FMPI2C_OA2_MASK07 ((uint8_t)0x07)
/**
* @}
*/
/** @defgroup FMPI2C_GENERAL_CALL_ADDRESSING_MODE FMPI2C General Call Addressing Mode
* @{
*/
#define FMPI2C_GENERALCALL_DISABLE (0x00000000U)
#define FMPI2C_GENERALCALL_ENABLE FMPI2C_CR1_GCEN
/**
* @}
*/
/** @defgroup FMPI2C_NOSTRETCH_MODE FMPI2C No-Stretch Mode
* @{
*/
#define FMPI2C_NOSTRETCH_DISABLE (0x00000000U)
#define FMPI2C_NOSTRETCH_ENABLE FMPI2C_CR1_NOSTRETCH
/**
* @}
*/
/** @defgroup FMPI2C_MEMORY_ADDRESS_SIZE FMPI2C Memory Address Size
* @{
*/
#define FMPI2C_MEMADD_SIZE_8BIT (0x00000001U)
#define FMPI2C_MEMADD_SIZE_16BIT (0x00000002U)
/**
* @}
*/
/** @defgroup FMPI2C_XFERDIRECTION FMPI2C Transfer Direction Master Point of View
* @{
*/
#define FMPI2C_DIRECTION_TRANSMIT (0x00000000U)
#define FMPI2C_DIRECTION_RECEIVE (0x00000001U)
/**
* @}
*/
/** @defgroup FMPI2C_RELOAD_END_MODE FMPI2C Reload End Mode
* @{
*/
#define FMPI2C_RELOAD_MODE FMPI2C_CR2_RELOAD
#define FMPI2C_AUTOEND_MODE FMPI2C_CR2_AUTOEND
#define FMPI2C_SOFTEND_MODE (0x00000000U)
/**
* @}
*/
/** @defgroup FMPI2C_START_STOP_MODE FMPI2C Start or Stop Mode
* @{
*/
#define FMPI2C_NO_STARTSTOP (0x00000000U)
#define FMPI2C_GENERATE_STOP (uint32_t)(0x80000000U | FMPI2C_CR2_STOP)
#define FMPI2C_GENERATE_START_READ (uint32_t)(0x80000000U | FMPI2C_CR2_START | FMPI2C_CR2_RD_WRN)
#define FMPI2C_GENERATE_START_WRITE (uint32_t)(0x80000000U | FMPI2C_CR2_START)
/**
* @}
*/
/** @defgroup FMPI2C_Interrupt_configuration_definition FMPI2C Interrupt configuration definition
* @brief FMPI2C Interrupt definition
* Elements values convention: 0xXXXXXXXX
* - XXXXXXXX : Interrupt control mask
* @{
*/
#define FMPI2C_IT_ERRI FMPI2C_CR1_ERRIE
#define FMPI2C_IT_TCI FMPI2C_CR1_TCIE
#define FMPI2C_IT_STOPI FMPI2C_CR1_STOPIE
#define FMPI2C_IT_NACKI FMPI2C_CR1_NACKIE
#define FMPI2C_IT_ADDRI FMPI2C_CR1_ADDRIE
#define FMPI2C_IT_RXI FMPI2C_CR1_RXIE
#define FMPI2C_IT_TXI FMPI2C_CR1_TXIE
/**
* @}
*/
/** @defgroup FMPI2C_Flag_definition FMPI2C Flag definition
* @{
*/
#define FMPI2C_FLAG_TXE FMPI2C_ISR_TXE
#define FMPI2C_FLAG_TXIS FMPI2C_ISR_TXIS
#define FMPI2C_FLAG_RXNE FMPI2C_ISR_RXNE
#define FMPI2C_FLAG_ADDR FMPI2C_ISR_ADDR
#define FMPI2C_FLAG_AF FMPI2C_ISR_NACKF
#define FMPI2C_FLAG_STOPF FMPI2C_ISR_STOPF
#define FMPI2C_FLAG_TC FMPI2C_ISR_TC
#define FMPI2C_FLAG_TCR FMPI2C_ISR_TCR
#define FMPI2C_FLAG_BERR FMPI2C_ISR_BERR
#define FMPI2C_FLAG_ARLO FMPI2C_ISR_ARLO
#define FMPI2C_FLAG_OVR FMPI2C_ISR_OVR
#define FMPI2C_FLAG_PECERR FMPI2C_ISR_PECERR
#define FMPI2C_FLAG_TIMEOUT FMPI2C_ISR_TIMEOUT
#define FMPI2C_FLAG_ALERT FMPI2C_ISR_ALERT
#define FMPI2C_FLAG_BUSY FMPI2C_ISR_BUSY
#define FMPI2C_FLAG_DIR FMPI2C_ISR_DIR
/**
* @}
*/
/**
* @}
*/
/* Exported macros -----------------------------------------------------------*/
/** @defgroup FMPI2C_Exported_Macros FMPI2C Exported Macros
* @{
*/
/** @brief Reset FMPI2C handle state.
* @param __HANDLE__ specifies the FMPI2C Handle.
* @retval None
*/
#define __HAL_FMPI2C_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_FMPI2C_STATE_RESET)
/** @brief Enable the specified FMPI2C interrupt.
* @param __HANDLE__ specifies the FMPI2C Handle.
* @param __INTERRUPT__ specifies the interrupt source to enable.
* This parameter can be one of the following values:
* @arg @ref FMPI2C_IT_ERRI Errors interrupt enable
* @arg @ref FMPI2C_IT_TCI Transfer complete interrupt enable
* @arg @ref FMPI2C_IT_STOPI STOP detection interrupt enable
* @arg @ref FMPI2C_IT_NACKI NACK received interrupt enable
* @arg @ref FMPI2C_IT_ADDRI Address match interrupt enable
* @arg @ref FMPI2C_IT_RXI RX interrupt enable
* @arg @ref FMPI2C_IT_TXI TX interrupt enable
*
* @retval None
*/
#define __HAL_FMPI2C_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 |= (__INTERRUPT__))
/** @brief Disable the specified FMPI2C interrupt.
* @param __HANDLE__ specifies the FMPI2C Handle.
* @param __INTERRUPT__ specifies the interrupt source to disable.
* This parameter can be one of the following values:
* @arg @ref FMPI2C_IT_ERRI Errors interrupt enable
* @arg @ref FMPI2C_IT_TCI Transfer complete interrupt enable
* @arg @ref FMPI2C_IT_STOPI STOP detection interrupt enable
* @arg @ref FMPI2C_IT_NACKI NACK received interrupt enable
* @arg @ref FMPI2C_IT_ADDRI Address match interrupt enable
* @arg @ref FMPI2C_IT_RXI RX interrupt enable
* @arg @ref FMPI2C_IT_TXI TX interrupt enable
*
* @retval None
*/
#define __HAL_FMPI2C_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 &= (~(__INTERRUPT__)))
/** @brief Check whether the specified FMPI2C interrupt source is enabled or not.
* @param __HANDLE__ specifies the FMPI2C Handle.
* @param __INTERRUPT__ specifies the FMPI2C interrupt source to check.
* This parameter can be one of the following values:
* @arg @ref FMPI2C_IT_ERRI Errors interrupt enable
* @arg @ref FMPI2C_IT_TCI Transfer complete interrupt enable
* @arg @ref FMPI2C_IT_STOPI STOP detection interrupt enable
* @arg @ref FMPI2C_IT_NACKI NACK received interrupt enable
* @arg @ref FMPI2C_IT_ADDRI Address match interrupt enable
* @arg @ref FMPI2C_IT_RXI RX interrupt enable
* @arg @ref FMPI2C_IT_TXI TX interrupt enable
*
* @retval The new state of __INTERRUPT__ (SET or RESET).
*/
#define __HAL_FMPI2C_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR1 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
/** @brief Check whether the specified FMPI2C flag is set or not.
* @param __HANDLE__ specifies the FMPI2C Handle.
* @param __FLAG__ specifies the flag to check.
* This parameter can be one of the following values:
* @arg @ref FMPI2C_FLAG_TXE Transmit data register empty
* @arg @ref FMPI2C_FLAG_TXIS Transmit interrupt status
* @arg @ref FMPI2C_FLAG_RXNE Receive data register not empty
* @arg @ref FMPI2C_FLAG_ADDR Address matched (slave mode)
* @arg @ref FMPI2C_FLAG_AF Acknowledge failure received flag
* @arg @ref FMPI2C_FLAG_STOPF STOP detection flag
* @arg @ref FMPI2C_FLAG_TC Transfer complete (master mode)
* @arg @ref FMPI2C_FLAG_TCR Transfer complete reload
* @arg @ref FMPI2C_FLAG_BERR Bus error
* @arg @ref FMPI2C_FLAG_ARLO Arbitration lost
* @arg @ref FMPI2C_FLAG_OVR Overrun/Underrun
* @arg @ref FMPI2C_FLAG_PECERR PEC error in reception
* @arg @ref FMPI2C_FLAG_TIMEOUT Timeout or Tlow detection flag
* @arg @ref FMPI2C_FLAG_ALERT SMBus alert
* @arg @ref FMPI2C_FLAG_BUSY Bus busy
* @arg @ref FMPI2C_FLAG_DIR Transfer direction (slave mode)
*
* @retval The new state of __FLAG__ (SET or RESET).
*/
#define __HAL_FMPI2C_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) == (__FLAG__)) ? SET : RESET)
/** @brief Clear the FMPI2C pending flags which are cleared by writing 1 in a specific bit.
* @param __HANDLE__ specifies the FMPI2C Handle.
* @param __FLAG__ specifies the flag to clear.
* This parameter can be any combination of the following values:
* @arg @ref FMPI2C_FLAG_TXE Transmit data register empty
* @arg @ref FMPI2C_FLAG_ADDR Address matched (slave mode)
* @arg @ref FMPI2C_FLAG_AF Acknowledge failure received flag
* @arg @ref FMPI2C_FLAG_STOPF STOP detection flag
* @arg @ref FMPI2C_FLAG_BERR Bus error
* @arg @ref FMPI2C_FLAG_ARLO Arbitration lost
* @arg @ref FMPI2C_FLAG_OVR Overrun/Underrun
* @arg @ref FMPI2C_FLAG_PECERR PEC error in reception
* @arg @ref FMPI2C_FLAG_TIMEOUT Timeout or Tlow detection flag
* @arg @ref FMPI2C_FLAG_ALERT SMBus alert
*
* @retval None
*/
#define __HAL_FMPI2C_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__FLAG__) == FMPI2C_FLAG_TXE) ? ((__HANDLE__)->Instance->ISR |= (__FLAG__)) \
: ((__HANDLE__)->Instance->ICR = (__FLAG__)))
/** @brief Enable the specified FMPI2C peripheral.
* @param __HANDLE__ specifies the FMPI2C Handle.
* @retval None
*/
#define __HAL_FMPI2C_ENABLE(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR1, FMPI2C_CR1_PE))
/** @brief Disable the specified FMPI2C peripheral.
* @param __HANDLE__ specifies the FMPI2C Handle.
* @retval None
*/
#define __HAL_FMPI2C_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->CR1, FMPI2C_CR1_PE))
/** @brief Generate a Non-Acknowledge FMPI2C peripheral in Slave mode.
* @param __HANDLE__ specifies the FMPI2C Handle.
* @retval None
*/
#define __HAL_FMPI2C_GENERATE_NACK(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR2, FMPI2C_CR2_NACK))
/**
* @}
*/
/* Include FMPI2C HAL Extended module */
#include "stm32f4xx_hal_fmpi2c_ex.h"
/* Exported functions --------------------------------------------------------*/
/** @addtogroup FMPI2C_Exported_Functions
* @{
*/
/** @addtogroup FMPI2C_Exported_Functions_Group1 Initialization and de-initialization functions
* @{
*/
/* Initialization and de-initialization functions******************************/
HAL_StatusTypeDef HAL_FMPI2C_Init(FMPI2C_HandleTypeDef *hfmpi2c);
HAL_StatusTypeDef HAL_FMPI2C_DeInit(FMPI2C_HandleTypeDef *hfmpi2c);
void HAL_FMPI2C_MspInit(FMPI2C_HandleTypeDef *hfmpi2c);
void HAL_FMPI2C_MspDeInit(FMPI2C_HandleTypeDef *hfmpi2c);
/**
* @}
*/
/** @addtogroup FMPI2C_Exported_Functions_Group2 Input and Output operation functions
* @{
*/
/* IO operation functions ****************************************************/
/******* Blocking mode: Polling */
HAL_StatusTypeDef HAL_FMPI2C_Master_Transmit(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout);
HAL_StatusTypeDef HAL_FMPI2C_Master_Receive(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout);
HAL_StatusTypeDef HAL_FMPI2C_Slave_Transmit(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout);
HAL_StatusTypeDef HAL_FMPI2C_Slave_Receive(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout);
HAL_StatusTypeDef HAL_FMPI2C_Mem_Write(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout);
HAL_StatusTypeDef HAL_FMPI2C_Mem_Read(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout);
HAL_StatusTypeDef HAL_FMPI2C_IsDeviceReady(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout);
/******* Non-Blocking mode: Interrupt */
HAL_StatusTypeDef HAL_FMPI2C_Master_Transmit_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_FMPI2C_Master_Receive_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_FMPI2C_Slave_Transmit_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_FMPI2C_Slave_Receive_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_FMPI2C_Mem_Write_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_FMPI2C_Mem_Read_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_FMPI2C_Master_Sequential_Transmit_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
HAL_StatusTypeDef HAL_FMPI2C_Master_Sequential_Receive_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
HAL_StatusTypeDef HAL_FMPI2C_Slave_Sequential_Transmit_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
HAL_StatusTypeDef HAL_FMPI2C_Slave_Sequential_Receive_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
HAL_StatusTypeDef HAL_FMPI2C_EnableListen_IT(FMPI2C_HandleTypeDef *hfmpi2c);
HAL_StatusTypeDef HAL_FMPI2C_DisableListen_IT(FMPI2C_HandleTypeDef *hfmpi2c);
HAL_StatusTypeDef HAL_FMPI2C_Master_Abort_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress);
/******* Non-Blocking mode: DMA */
HAL_StatusTypeDef HAL_FMPI2C_Master_Transmit_DMA(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_FMPI2C_Master_Receive_DMA(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_FMPI2C_Slave_Transmit_DMA(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_FMPI2C_Slave_Receive_DMA(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_FMPI2C_Mem_Write_DMA(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_FMPI2C_Mem_Read_DMA(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
/**
* @}
*/
/** @addtogroup FMPI2C_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks
* @{
*/
/******* FMPI2C IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */
void HAL_FMPI2C_EV_IRQHandler(FMPI2C_HandleTypeDef *hfmpi2c);
void HAL_FMPI2C_ER_IRQHandler(FMPI2C_HandleTypeDef *hfmpi2c);
void HAL_FMPI2C_MasterTxCpltCallback(FMPI2C_HandleTypeDef *hfmpi2c);
void HAL_FMPI2C_MasterRxCpltCallback(FMPI2C_HandleTypeDef *hfmpi2c);
void HAL_FMPI2C_SlaveTxCpltCallback(FMPI2C_HandleTypeDef *hfmpi2c);
void HAL_FMPI2C_SlaveRxCpltCallback(FMPI2C_HandleTypeDef *hfmpi2c);
void HAL_FMPI2C_AddrCallback(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t TransferDirection, uint16_t AddrMatchCode);
void HAL_FMPI2C_ListenCpltCallback(FMPI2C_HandleTypeDef *hfmpi2c);
void HAL_FMPI2C_MemTxCpltCallback(FMPI2C_HandleTypeDef *hfmpi2c);
void HAL_FMPI2C_MemRxCpltCallback(FMPI2C_HandleTypeDef *hfmpi2c);
void HAL_FMPI2C_ErrorCallback(FMPI2C_HandleTypeDef *hfmpi2c);
void HAL_FMPI2C_AbortCpltCallback(FMPI2C_HandleTypeDef *hfmpi2c);
/**
* @}
*/
/** @addtogroup FMPI2C_Exported_Functions_Group3 Peripheral State, Mode and Error functions
* @{
*/
/* Peripheral State, Mode and Error functions *********************************/
HAL_FMPI2C_StateTypeDef HAL_FMPI2C_GetState(FMPI2C_HandleTypeDef *hfmpi2c);
HAL_FMPI2C_ModeTypeDef HAL_FMPI2C_GetMode(FMPI2C_HandleTypeDef *hfmpi2c);
uint32_t HAL_FMPI2C_GetError(FMPI2C_HandleTypeDef *hfmpi2c);
/**
* @}
*/
/**
* @}
*/
/* Private constants ---------------------------------------------------------*/
/** @defgroup FMPI2C_Private_Constants FMPI2C Private Constants
* @{
*/
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/** @defgroup FMPI2C_Private_Macro FMPI2C Private Macros
* @{
*/
#define IS_FMPI2C_ADDRESSING_MODE(MODE) (((MODE) == FMPI2C_ADDRESSINGMODE_7BIT) || \
((MODE) == FMPI2C_ADDRESSINGMODE_10BIT))
#define IS_FMPI2C_DUAL_ADDRESS(ADDRESS) (((ADDRESS) == FMPI2C_DUALADDRESS_DISABLE) || \
((ADDRESS) == FMPI2C_DUALADDRESS_ENABLE))
#define IS_FMPI2C_OWN_ADDRESS2_MASK(MASK) (((MASK) == FMPI2C_OA2_NOMASK) || \
((MASK) == FMPI2C_OA2_MASK01) || \
((MASK) == FMPI2C_OA2_MASK02) || \
((MASK) == FMPI2C_OA2_MASK03) || \
((MASK) == FMPI2C_OA2_MASK04) || \
((MASK) == FMPI2C_OA2_MASK05) || \
((MASK) == FMPI2C_OA2_MASK06) || \
((MASK) == FMPI2C_OA2_MASK07))
#define IS_FMPI2C_GENERAL_CALL(CALL) (((CALL) == FMPI2C_GENERALCALL_DISABLE) || \
((CALL) == FMPI2C_GENERALCALL_ENABLE))
#define IS_FMPI2C_NO_STRETCH(STRETCH) (((STRETCH) == FMPI2C_NOSTRETCH_DISABLE) || \
((STRETCH) == FMPI2C_NOSTRETCH_ENABLE))
#define IS_FMPI2C_MEMADD_SIZE(SIZE) (((SIZE) == FMPI2C_MEMADD_SIZE_8BIT) || \
((SIZE) == FMPI2C_MEMADD_SIZE_16BIT))
#define IS_TRANSFER_MODE(MODE) (((MODE) == FMPI2C_RELOAD_MODE) || \
((MODE) == FMPI2C_AUTOEND_MODE) || \
((MODE) == FMPI2C_SOFTEND_MODE))
#define IS_TRANSFER_REQUEST(REQUEST) (((REQUEST) == FMPI2C_GENERATE_STOP) || \
((REQUEST) == FMPI2C_GENERATE_START_READ) || \
((REQUEST) == FMPI2C_GENERATE_START_WRITE) || \
((REQUEST) == FMPI2C_NO_STARTSTOP))
#define IS_FMPI2C_TRANSFER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == FMPI2C_FIRST_FRAME) || \
((REQUEST) == FMPI2C_FIRST_AND_NEXT_FRAME) || \
((REQUEST) == FMPI2C_NEXT_FRAME) || \
((REQUEST) == FMPI2C_FIRST_AND_LAST_FRAME) || \
((REQUEST) == FMPI2C_LAST_FRAME) || \
((REQUEST) == FMPI2C_LAST_FRAME_NO_STOP))
#define FMPI2C_RESET_CR2(__HANDLE__) ((__HANDLE__)->Instance->CR2 &= (uint32_t)~((uint32_t)(FMPI2C_CR2_SADD | FMPI2C_CR2_HEAD10R | FMPI2C_CR2_NBYTES | FMPI2C_CR2_RELOAD | FMPI2C_CR2_RD_WRN)))
#define FMPI2C_GET_ADDR_MATCH(__HANDLE__) (((__HANDLE__)->Instance->ISR & FMPI2C_ISR_ADDCODE) >> 16)
#define FMPI2C_GET_DIR(__HANDLE__) (((__HANDLE__)->Instance->ISR & FMPI2C_ISR_DIR) >> 16)
#define FMPI2C_GET_STOP_MODE(__HANDLE__) ((__HANDLE__)->Instance->CR2 & FMPI2C_CR2_AUTOEND)
#define FMPI2C_GET_OWN_ADDRESS1(__HANDLE__) ((__HANDLE__)->Instance->OAR1 & FMPI2C_OAR1_OA1)
#define FMPI2C_GET_OWN_ADDRESS2(__HANDLE__) ((__HANDLE__)->Instance->OAR2 & FMPI2C_OAR2_OA2)
#define IS_FMPI2C_OWN_ADDRESS1(ADDRESS1) ((ADDRESS1) <= 0x000003FFU)
#define IS_FMPI2C_OWN_ADDRESS2(ADDRESS2) ((ADDRESS2) <= (uint16_t)0x00FF)
#define FMPI2C_MEM_ADD_MSB(__ADDRESS__) ((uint8_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)(0xFF00))) >> 8U)))
#define FMPI2C_MEM_ADD_LSB(__ADDRESS__) ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)(0x00FF))))
#define FMPI2C_GENERATE_START(__ADDMODE__,__ADDRESS__) (((__ADDMODE__) == FMPI2C_ADDRESSINGMODE_7BIT) ? (uint32_t)((((uint32_t)(__ADDRESS__) & (FMPI2C_CR2_SADD)) | (FMPI2C_CR2_START) | (FMPI2C_CR2_AUTOEND)) & (~FMPI2C_CR2_RD_WRN)) : \
(uint32_t)((((uint32_t)(__ADDRESS__) & (FMPI2C_CR2_SADD)) | (FMPI2C_CR2_ADD10) | (FMPI2C_CR2_START)) & (~FMPI2C_CR2_RD_WRN)))
/**
* @}
*/
/* Private Functions ---------------------------------------------------------*/
/** @defgroup FMPI2C_Private_Functions FMPI2C Private Functions
* @{
*/
/* Private functions are defined in stm32f4xx_hal_fmpi2c.c file */
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#endif /* STM32F410xx || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */
#ifdef __cplusplus
}
#endif
#endif /* __STM32F4xx_HAL_FMPI2C_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
