The official Mbed 2 C/C++ SDK provides the software platform and libraries to build your applications.
Dependents: hello SerialTestv11 SerialTestv12 Sierpinski ... more
mbed 2
This is the mbed 2 library. If you'd like to learn about Mbed OS please see the mbed-os docs.
TARGET_EFM32PG_STK3401/TOOLCHAIN_IAR/efm32pg1b_prs_signals.h
- Committer:
- AnnaBridge
- Date:
- 2018-11-08
- Revision:
- 171:3a7713b1edbc
File content as of revision 171:3a7713b1edbc:
/**************************************************************************//** * @file efm32pg1b_prs_signals.h * @brief EFM32PG1B_PRS_SIGNALS register and bit field definitions * @version 5.1.2 ****************************************************************************** * @section License * <b>Copyright 2017 Silicon Laboratories, Inc. http://www.silabs.com</b> ****************************************************************************** * * Permission is granted to anyone to use this software for any purpose, * including commercial applications, and to alter it and redistribute it * freely, subject to the following restrictions: * * 1. The origin of this software must not be misrepresented; you must not * claim that you wrote the original software.@n * 2. Altered source versions must be plainly marked as such, and must not be * misrepresented as being the original software.@n * 3. This notice may not be removed or altered from any source distribution. * * DISCLAIMER OF WARRANTY/LIMITATION OF REMEDIES: Silicon Laboratories, Inc. * has no obligation to support this Software. Silicon Laboratories, Inc. is * providing the Software "AS IS", with no express or implied warranties of any * kind, including, but not limited to, any implied warranties of * merchantability or fitness for any particular purpose or warranties against * infringement of any proprietary rights of a third party. * * Silicon Laboratories, Inc. will not be liable for any consequential, * incidental, or special damages, or any other relief, or for any claim by * any third party, arising from your use of this Software. * *****************************************************************************/ /**************************************************************************//** * @addtogroup Parts * @{ ******************************************************************************/ /**************************************************************************//** * @addtogroup EFM32PG1B_PRS_Signals * @{ * @brief PRS Signal names *****************************************************************************/ #define PRS_PRS_CH0 ((1 << 8) + 0) /**< PRS PRS channel 0 */ #define PRS_PRS_CH1 ((1 << 8) + 1) /**< PRS PRS channel 1 */ #define PRS_PRS_CH2 ((1 << 8) + 2) /**< PRS PRS channel 2 */ #define PRS_PRS_CH3 ((1 << 8) + 3) /**< PRS PRS channel 3 */ #define PRS_PRS_CH4 ((1 << 8) + 4) /**< PRS PRS channel 4 */ #define PRS_PRS_CH5 ((1 << 8) + 5) /**< PRS PRS channel 5 */ #define PRS_PRS_CH6 ((1 << 8) + 6) /**< PRS PRS channel 6 */ #define PRS_PRS_CH7 ((1 << 8) + 7) /**< PRS PRS channel 7 */ #define PRS_PRS_CH8 ((2 << 8) + 0) /**< PRS PRS channel 8 */ #define PRS_PRS_CH9 ((2 << 8) + 1) /**< PRS PRS channel 9 */ #define PRS_PRS_CH10 ((2 << 8) + 2) /**< PRS PRS channel 10 */ #define PRS_PRS_CH11 ((2 << 8) + 3) /**< PRS PRS channel 11 */ #define PRS_ACMP0_OUT ((6 << 8) + 0) /**< PRS Analog comparator output */ #define PRS_ACMP1_OUT ((7 << 8) + 0) /**< PRS Analog comparator output */ #define PRS_ADC0_SINGLE ((8 << 8) + 0) /**< PRS ADC single conversion done */ #define PRS_ADC0_SCAN ((8 << 8) + 1) /**< PRS ADC scan conversion done */ #define PRS_USART0_IRTX ((16 << 8) + 0) /**< PRS USART 0 IRDA out */ #define PRS_USART0_TXC ((16 << 8) + 1) /**< PRS USART 0 TX complete */ #define PRS_USART0_RXDATAV ((16 << 8) + 2) /**< PRS USART 0 RX Data Valid */ #define PRS_USART0_RTS ((16 << 8) + 3) /**< PRS USART 0 RTS */ #define PRS_USART0_TX ((16 << 8) + 5) /**< PRS USART 0 TX */ #define PRS_USART0_CS ((16 << 8) + 6) /**< PRS USART 0 CS */ #define PRS_USART1_TXC ((17 << 8) + 1) /**< PRS USART 1 TX complete */ #define PRS_USART1_RXDATAV ((17 << 8) + 2) /**< PRS USART 1 RX Data Valid */ #define PRS_USART1_RTS ((17 << 8) + 3) /**< PRS USART 0 RTS */ #define PRS_USART1_TX ((17 << 8) + 5) /**< PRS USART 1 TX */ #define PRS_USART1_CS ((17 << 8) + 6) /**< PRS USART 1 CS */ #define PRS_TIMER0_UF ((28 << 8) + 0) /**< PRS Timer 0 Underflow */ #define PRS_TIMER0_OF ((28 << 8) + 1) /**< PRS Timer 0 Overflow */ #define PRS_TIMER0_CC0 ((28 << 8) + 2) /**< PRS Timer 0 Compare/Capture 0 */ #define PRS_TIMER0_CC1 ((28 << 8) + 3) /**< PRS Timer 0 Compare/Capture 1 */ #define PRS_TIMER0_CC2 ((28 << 8) + 4) /**< PRS Timer 0 Compare/Capture 2 */ #define PRS_TIMER1_UF ((29 << 8) + 0) /**< PRS Timer 1 Underflow */ #define PRS_TIMER1_OF ((29 << 8) + 1) /**< PRS Timer 1 Overflow */ #define PRS_TIMER1_CC0 ((29 << 8) + 2) /**< PRS Timer 1 Compare/Capture 0 */ #define PRS_TIMER1_CC1 ((29 << 8) + 3) /**< PRS Timer 1 Compare/Capture 1 */ #define PRS_TIMER1_CC2 ((29 << 8) + 4) /**< PRS Timer 1 Compare/Capture 2 */ #define PRS_TIMER1_CC3 ((29 << 8) + 5) /**< PRS Timer 1 Compare/Capture 3 */ #define PRS_RTCC_CCV0 ((41 << 8) + 1) /**< PRS RTCC Compare 0 */ #define PRS_RTCC_CCV1 ((41 << 8) + 2) /**< PRS RTCC Compare 1 */ #define PRS_RTCC_CCV2 ((41 << 8) + 3) /**< PRS RTCC Compare 2 */ #define PRS_GPIO_PIN0 ((48 << 8) + 0) /**< PRS GPIO pin 0 */ #define PRS_GPIO_PIN1 ((48 << 8) + 1) /**< PRS GPIO pin 1 */ #define PRS_GPIO_PIN2 ((48 << 8) + 2) /**< PRS GPIO pin 2 */ #define PRS_GPIO_PIN3 ((48 << 8) + 3) /**< PRS GPIO pin 3 */ #define PRS_GPIO_PIN4 ((48 << 8) + 4) /**< PRS GPIO pin 4 */ #define PRS_GPIO_PIN5 ((48 << 8) + 5) /**< PRS GPIO pin 5 */ #define PRS_GPIO_PIN6 ((48 << 8) + 6) /**< PRS GPIO pin 6 */ #define PRS_GPIO_PIN7 ((48 << 8) + 7) /**< PRS GPIO pin 7 */ #define PRS_GPIO_PIN8 ((49 << 8) + 0) /**< PRS GPIO pin 8 */ #define PRS_GPIO_PIN9 ((49 << 8) + 1) /**< PRS GPIO pin 9 */ #define PRS_GPIO_PIN10 ((49 << 8) + 2) /**< PRS GPIO pin 10 */ #define PRS_GPIO_PIN11 ((49 << 8) + 3) /**< PRS GPIO pin 11 */ #define PRS_GPIO_PIN12 ((49 << 8) + 4) /**< PRS GPIO pin 12 */ #define PRS_GPIO_PIN13 ((49 << 8) + 5) /**< PRS GPIO pin 13 */ #define PRS_GPIO_PIN14 ((49 << 8) + 6) /**< PRS GPIO pin 14 */ #define PRS_GPIO_PIN15 ((49 << 8) + 7) /**< PRS GPIO pin 15 */ #define PRS_LETIMER0_CH0 ((52 << 8) + 0) /**< PRS LETIMER CH0 Out */ #define PRS_LETIMER0_CH1 ((52 << 8) + 1) /**< PRS LETIMER CH1 Out */ #define PRS_PCNT0_TCC ((54 << 8) + 0) /**< PRS Triggered compare match */ #define PRS_PCNT0_UFOF ((54 << 8) + 1) /**< PRS Counter overflow or underflow */ #define PRS_PCNT0_DIR ((54 << 8) + 2) /**< PRS Counter direction */ #define PRS_CRYOTIMER_PERIOD ((60 << 8) + 0) /**< PRS CRYOTIMER Output */ #define PRS_CMU_CLKOUT0 ((61 << 8) + 0) /**< PRS Clock Output 0 */ #define PRS_CMU_CLKOUT1 ((61 << 8) + 1) /**< PRS Clock Output 1 */ #define PRS_CM4_TXEV ((67 << 8) + 0) /**< PRS */ /** @} End of group EFM32PG1B_PRS */ /** @} End of group Parts */