mbed official
The official Mbed 2 C/C++ SDK provides the software platform and libraries to build your applications.
Dependents: hello SerialTestv11 SerialTestv12 Sierpinski ... more
mbed 2
This is the mbed 2 library. If you'd like to learn about Mbed OS please see the mbed-os docs.
Diff: TARGET_NUCLEO_F411RE/stm32f4xx_ll_usb.h
- Revision:
- 122:f9eeca106725
- Parent:
- 110:165afa46840b
--- a/TARGET_NUCLEO_F411RE/stm32f4xx_ll_usb.h Wed May 25 16:44:06 2016 +0100
+++ b/TARGET_NUCLEO_F411RE/stm32f4xx_ll_usb.h Thu Jul 07 14:34:11 2016 +0100
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f4xx_ll_usb.h
* @author MCD Application Team
- * @version V1.4.1
- * @date 09-October-2015
+ * @version V1.5.0
+ * @date 06-May-2016
* @brief Header file of USB Core HAL module.
******************************************************************************
* @attention
*
- * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
@@ -45,7 +45,8 @@
#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \
- defined(STM32F469xx) || defined(STM32F479xx)
+ defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx) || defined(STM32F412Cx)
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_hal_def.h"
@@ -64,9 +65,9 @@
*/
typedef enum
{
- USB_OTG_DEVICE_MODE = 0,
- USB_OTG_HOST_MODE = 1,
- USB_OTG_DRD_MODE = 2
+ USB_OTG_DEVICE_MODE = 0U,
+ USB_OTG_HOST_MODE = 1U,
+ USB_OTG_DRD_MODE = 2U
}USB_OTG_ModeTypeDef;
@@ -74,7 +75,7 @@
* @brief URB States definition
*/
typedef enum {
- URB_IDLE = 0,
+ URB_IDLE = 0U,
URB_DONE,
URB_NOTREADY,
URB_NYET,
@@ -87,7 +88,7 @@
* @brief Host channel States definition
*/
typedef enum {
- HC_IDLE = 0,
+ HC_IDLE = 0U,
HC_XFRC,
HC_HALTED,
HC_NAK,
@@ -106,127 +107,133 @@
{
uint32_t dev_endpoints; /*!< Device Endpoints number.
This parameter depends on the used USB core.
- This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
-
+ This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
+
uint32_t Host_channels; /*!< Host Channels number.
This parameter Depends on the used USB core.
- This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
+ This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
uint32_t speed; /*!< USB Core speed.
- This parameter can be any value of @ref USB_Core_Speed_ */
-
- uint32_t dma_enable; /*!< Enable or disable of the USB embedded DMA. */
+ This parameter can be any value of @ref USB_Core_Speed_ */
+
+ uint32_t dma_enable; /*!< Enable or disable of the USB embedded DMA. */
uint32_t ep0_mps; /*!< Set the Endpoint 0 Max Packet size.
- This parameter can be any value of @ref USB_EP0_MPS_ */
-
+ This parameter can be any value of @ref USB_EP0_MPS_ */
+
uint32_t phy_itface; /*!< Select the used PHY interface.
- This parameter can be any value of @ref USB_Core_PHY_ */
-
- uint32_t Sof_enable; /*!< Enable or disable the output of the SOF signal. */
-
+ This parameter can be any value of @ref USB_Core_PHY_ */
+
+ uint32_t Sof_enable; /*!< Enable or disable the output of the SOF signal. */
+
uint32_t low_power_enable; /*!< Enable or disable the low power mode. */
-
+
uint32_t lpm_enable; /*!< Enable or disable Link Power Management. */
uint32_t battery_charging_enable; /*!< Enable or disable Battery charging. */
-
+
uint32_t vbus_sensing_enable; /*!< Enable or disable the VBUS Sensing feature. */
- uint32_t use_dedicated_ep1; /*!< Enable or disable the use of the dedicated EP1 interrupt. */
-
- uint32_t use_external_vbus; /*!< Enable or disable the use of the external VBUS. */
-
+ uint32_t use_dedicated_ep1; /*!< Enable or disable the use of the dedicated EP1 interrupt. */
+
+ uint32_t use_external_vbus; /*!< Enable or disable the use of the external VBUS. */
+
}USB_OTG_CfgTypeDef;
+/**
+ * @brief OTG End Point Initialization Structure definition
+ */
typedef struct
{
uint8_t num; /*!< Endpoint number
- This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
-
+ This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
+
uint8_t is_in; /*!< Endpoint direction
- This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
-
+ This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
+
uint8_t is_stall; /*!< Endpoint stall condition
- This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
-
+ This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
+
uint8_t type; /*!< Endpoint type
- This parameter can be any value of @ref USB_EP_Type_ */
-
+ This parameter can be any value of @ref USB_EP_Type_ */
+
uint8_t data_pid_start; /*!< Initial data PID
This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
-
+
uint8_t even_odd_frame; /*!< IFrame parity
This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
-
+
uint16_t tx_fifo_num; /*!< Transmission FIFO number
This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
-
+
uint32_t maxpacket; /*!< Endpoint Max packet size
This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */
uint8_t *xfer_buff; /*!< Pointer to transfer buffer */
-
+
uint32_t dma_addr; /*!< 32 bits aligned transfer buffer address */
-
+
uint32_t xfer_len; /*!< Current transfer length */
-
+
uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer */
}USB_OTG_EPTypeDef;
+/**
+ * @brief OTG HC Initialization Structure definition
+ */
typedef struct
{
uint8_t dev_addr ; /*!< USB device address.
- This parameter must be a number between Min_Data = 1 and Max_Data = 255 */
+ This parameter must be a number between Min_Data = 1 and Max_Data = 255 */
uint8_t ch_num; /*!< Host channel number.
- This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
-
+ This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
+
uint8_t ep_num; /*!< Endpoint number.
- This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
-
+ This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
+
uint8_t ep_is_in; /*!< Endpoint direction
- This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
-
+ This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
+
uint8_t speed; /*!< USB Host speed.
This parameter can be any value of @ref USB_Core_Speed_ */
-
+
uint8_t do_ping; /*!< Enable or disable the use of the PING protocol for HS mode. */
-
+
uint8_t process_ping; /*!< Execute the PING protocol for HS mode. */
uint8_t ep_type; /*!< Endpoint Type.
This parameter can be any value of @ref USB_EP_Type_ */
-
+
uint16_t max_packet; /*!< Endpoint Max packet size.
This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */
-
+
uint8_t data_pid; /*!< Initial data PID.
This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
-
+
uint8_t *xfer_buff; /*!< Pointer to transfer buffer. */
-
+
uint32_t xfer_len; /*!< Current transfer length. */
-
+
uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer. */
-
+
uint8_t toggle_in; /*!< IN transfer current toggle flag.
This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
-
+
uint8_t toggle_out; /*!< OUT transfer current toggle flag
This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
-
+
uint32_t dma_addr; /*!< 32 bits aligned transfer buffer address. */
-
+
uint32_t ErrCnt; /*!< Host channel error count.*/
-
+
USB_OTG_URBStateTypeDef urb_state; /*!< URB state.
- This parameter can be any value of @ref USB_OTG_URBStateTypeDef */
-
+ This parameter can be any value of @ref USB_OTG_URBStateTypeDef */
+
USB_OTG_HCStateTypeDef state; /*!< Host Channel state.
- This parameter can be any value of @ref USB_OTG_HCStateTypeDef */
-
+ This parameter can be any value of @ref USB_OTG_HCStateTypeDef */
+
}USB_OTG_HCTypeDef;
/* Exported constants --------------------------------------------------------*/
@@ -238,9 +245,9 @@
/** @defgroup USB_Core_Mode_ USB Core Mode
* @{
*/
-#define USB_OTG_MODE_DEVICE 0
-#define USB_OTG_MODE_HOST 1
-#define USB_OTG_MODE_DRD 2
+#define USB_OTG_MODE_DEVICE 0U
+#define USB_OTG_MODE_HOST 1U
+#define USB_OTG_MODE_DRD 2U
/**
* @}
*/
@@ -248,10 +255,10 @@
/** @defgroup USB_Core_Speed_ USB Core Speed
* @{
*/
-#define USB_OTG_SPEED_HIGH 0
-#define USB_OTG_SPEED_HIGH_IN_FULL 1
-#define USB_OTG_SPEED_LOW 2
-#define USB_OTG_SPEED_FULL 3
+#define USB_OTG_SPEED_HIGH 0U
+#define USB_OTG_SPEED_HIGH_IN_FULL 1U
+#define USB_OTG_SPEED_LOW 2U
+#define USB_OTG_SPEED_FULL 3U
/**
* @}
*/
@@ -259,8 +266,8 @@
/** @defgroup USB_Core_PHY_ USB Core PHY
* @{
*/
-#define USB_OTG_ULPI_PHY 1
-#define USB_OTG_EMBEDDED_PHY 2
+#define USB_OTG_ULPI_PHY 1U
+#define USB_OTG_EMBEDDED_PHY 2U
/**
* @}
*/
@@ -268,9 +275,9 @@
/** @defgroup USB_Core_MPS_ USB Core MPS
* @{
*/
-#define USB_OTG_HS_MAX_PACKET_SIZE 512
-#define USB_OTG_FS_MAX_PACKET_SIZE 64
-#define USB_OTG_MAX_EP0_SIZE 64
+#define USB_OTG_HS_MAX_PACKET_SIZE 512U
+#define USB_OTG_FS_MAX_PACKET_SIZE 64U
+#define USB_OTG_MAX_EP0_SIZE 64U
/**
* @}
*/
@@ -278,10 +285,10 @@
/** @defgroup USB_Core_Phy_Frequency_ USB Core Phy Frequency
* @{
*/
-#define DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ (0 << 1)
-#define DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ (1 << 1)
-#define DSTS_ENUMSPD_LS_PHY_6MHZ (2 << 1)
-#define DSTS_ENUMSPD_FS_PHY_48MHZ (3 << 1)
+#define DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ (0U << 1U)
+#define DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ (1U << 1U)
+#define DSTS_ENUMSPD_LS_PHY_6MHZ (2U << 1U)
+#define DSTS_ENUMSPD_FS_PHY_48MHZ (3U << 1U)
/**
* @}
*/
@@ -289,10 +296,10 @@
/** @defgroup USB_CORE_Frame_Interval_ USB CORE Frame Interval
* @{
*/
-#define DCFG_FRAME_INTERVAL_80 0
-#define DCFG_FRAME_INTERVAL_85 1
-#define DCFG_FRAME_INTERVAL_90 2
-#define DCFG_FRAME_INTERVAL_95 3
+#define DCFG_FRAME_INTERVAL_80 0U
+#define DCFG_FRAME_INTERVAL_85 1U
+#define DCFG_FRAME_INTERVAL_90 2U
+#define DCFG_FRAME_INTERVAL_95 3U
/**
* @}
*/
@@ -300,10 +307,10 @@
/** @defgroup USB_EP0_MPS_ USB EP0 MPS
* @{
*/
-#define DEP0CTL_MPS_64 0
-#define DEP0CTL_MPS_32 1
-#define DEP0CTL_MPS_16 2
-#define DEP0CTL_MPS_8 3
+#define DEP0CTL_MPS_64 0U
+#define DEP0CTL_MPS_32 1U
+#define DEP0CTL_MPS_16 2U
+#define DEP0CTL_MPS_8 3U
/**
* @}
*/
@@ -311,9 +318,9 @@
/** @defgroup USB_EP_Speed_ USB EP Speed
* @{
*/
-#define EP_SPEED_LOW 0
-#define EP_SPEED_FULL 1
-#define EP_SPEED_HIGH 2
+#define EP_SPEED_LOW 0U
+#define EP_SPEED_FULL 1U
+#define EP_SPEED_HIGH 2U
/**
* @}
*/
@@ -321,11 +328,11 @@
/** @defgroup USB_EP_Type_ USB EP Type
* @{
*/
-#define EP_TYPE_CTRL 0
-#define EP_TYPE_ISOC 1
-#define EP_TYPE_BULK 2
-#define EP_TYPE_INTR 3
-#define EP_TYPE_MSK 3
+#define EP_TYPE_CTRL 0U
+#define EP_TYPE_ISOC 1U
+#define EP_TYPE_BULK 2U
+#define EP_TYPE_INTR 3U
+#define EP_TYPE_MSK 3U
/**
* @}
*/
@@ -333,11 +340,11 @@
/** @defgroup USB_STS_Defines_ USB STS Defines
* @{
*/
-#define STS_GOUT_NAK 1
-#define STS_DATA_UPDT 2
-#define STS_XFER_COMP 3
-#define STS_SETUP_COMP 4
-#define STS_SETUP_UPDT 6
+#define STS_GOUT_NAK 1U
+#define STS_DATA_UPDT 2U
+#define STS_XFER_COMP 3U
+#define STS_SETUP_COMP 4U
+#define STS_SETUP_UPDT 6U
/**
* @}
*/
@@ -345,9 +352,9 @@
/** @defgroup HCFG_SPEED_Defines_ HCFG SPEED Defines
* @{
*/
-#define HCFG_30_60_MHZ 0
-#define HCFG_48_MHZ 1
-#define HCFG_6_MHZ 2
+#define HCFG_30_60_MHZ 0U
+#define HCFG_48_MHZ 1U
+#define HCFG_6_MHZ 2U
/**
* @}
*/
@@ -355,22 +362,22 @@
/** @defgroup HPRT0_PRTSPD_SPEED_Defines_ HPRT0 PRTSPD SPEED Defines
* @{
*/
-#define HPRT0_PRTSPD_HIGH_SPEED 0
-#define HPRT0_PRTSPD_FULL_SPEED 1
-#define HPRT0_PRTSPD_LOW_SPEED 2
+#define HPRT0_PRTSPD_HIGH_SPEED 0U
+#define HPRT0_PRTSPD_FULL_SPEED 1U
+#define HPRT0_PRTSPD_LOW_SPEED 2U
/**
* @}
*/
-#define HCCHAR_CTRL 0
-#define HCCHAR_ISOC 1
-#define HCCHAR_BULK 2
-#define HCCHAR_INTR 3
+#define HCCHAR_CTRL 0U
+#define HCCHAR_ISOC 1U
+#define HCCHAR_BULK 2U
+#define HCCHAR_INTR 3U
-#define HC_PID_DATA0 0
-#define HC_PID_DATA2 1
-#define HC_PID_DATA1 2
-#define HC_PID_SETUP 3
+#define HC_PID_DATA0 0U
+#define HC_PID_DATA2 1U
+#define HC_PID_DATA1 2U
+#define HC_PID_SETUP 3U
#define GRXSTS_PKTSTS_IN 2
#define GRXSTS_PKTSTS_IN_XFER_COMP 3
@@ -381,11 +388,11 @@
#define USBx_HPRT0 *(__IO uint32_t *)((uint32_t)USBx + USB_OTG_HOST_PORT_BASE)
#define USBx_DEVICE ((USB_OTG_DeviceTypeDef *)((uint32_t )USBx + USB_OTG_DEVICE_BASE))
-#define USBx_INEP(i) ((USB_OTG_INEndpointTypeDef *)((uint32_t)USBx + USB_OTG_IN_ENDPOINT_BASE + (i)*USB_OTG_EP_REG_SIZE))
-#define USBx_OUTEP(i) ((USB_OTG_OUTEndpointTypeDef *)((uint32_t)USBx + USB_OTG_OUT_ENDPOINT_BASE + (i)*USB_OTG_EP_REG_SIZE))
+#define USBx_INEP(i) ((USB_OTG_INEndpointTypeDef *)((uint32_t)USBx + USB_OTG_IN_ENDPOINT_BASE + (i)*USB_OTG_EP_REG_SIZE))
+#define USBx_OUTEP(i) ((USB_OTG_OUTEndpointTypeDef *)((uint32_t)USBx + USB_OTG_OUT_ENDPOINT_BASE + (i)*USB_OTG_EP_REG_SIZE))
#define USBx_DFIFO(i) *(__IO uint32_t *)((uint32_t)USBx + USB_OTG_FIFO_BASE + (i) * USB_OTG_FIFO_SIZE)
-#define USBx_HOST ((USB_OTG_HostTypeDef *)((uint32_t )USBx + USB_OTG_HOST_BASE))
+#define USBx_HOST ((USB_OTG_HostTypeDef *)((uint32_t )USBx + USB_OTG_HOST_BASE))
#define USBx_HC(i) ((USB_OTG_HostChannelTypeDef *)((uint32_t)USBx + USB_OTG_HOST_CHANNEL_BASE + (i)*USB_OTG_HOST_CHANNEL_SIZE))
/**
* @}
@@ -395,7 +402,7 @@
#define USB_UNMASK_INTERRUPT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->GINTMSK |= (__INTERRUPT__))
#define CLEAR_IN_EP_INTR(__EPNUM__, __INTERRUPT__) (USBx_INEP(__EPNUM__)->DIEPINT = (__INTERRUPT__))
-#define CLEAR_OUT_EP_INTR(__EPNUM__, __INTERRUPT__) (USBx_OUTEP(__EPNUM__)->DOEPINT = (__INTERRUPT__))
+#define CLEAR_OUT_EP_INTR(__EPNUM__, __INTERRUPT__) (USBx_OUTEP(__EPNUM__)->DOEPINT = (__INTERRUPT__))
/* Exported functions --------------------------------------------------------*/
HAL_StatusTypeDef USB_CoreInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef Init);
@@ -458,7 +465,8 @@
* @}
*/
#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||
- STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx */
+ STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Rx ||
+ STM32F412Vx || STM32F412Cx */
#ifdef __cplusplus
}
#endif
