Diff: TARGET_B96B_F446VE/TARGET_STM/TARGET_STM32F4/device/stm32f4xx_hal_i2s.h

Revision:

163:e59c8e839560

Parent:

156:ff21514d8981

--- a/TARGET_B96B_F446VE/TARGET_STM/TARGET_STM32F4/device/stm32f4xx_hal_i2s.h	Mon Mar 19 15:30:13 2018 +0000
+++ b/TARGET_B96B_F446VE/TARGET_STM/TARGET_STM32F4/device/stm32f4xx_hal_i2s.h	Tue Mar 20 13:30:58 2018 +0000
@@ -2,8 +2,6 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_i2s.h
   * @author  MCD Application Team
-  * @version V1.7.1
-  * @date    14-April-2017
   * @brief   Header file of I2S HAL module.
   ******************************************************************************
   * @attention
@@ -310,21 +308,21 @@
   */
 
 /** @brief Reset I2S handle state
-  * @param  __HANDLE__: specifies the I2S Handle.
+  * @param  __HANDLE__ specifies the I2S Handle.
   * @retval None
   */
 #define __HAL_I2S_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2S_STATE_RESET)
 
 /** @brief  Enable or disable the specified SPI peripheral (in I2S mode).
-  * @param  __HANDLE__: specifies the I2S Handle.
+  * @param  __HANDLE__ specifies the I2S Handle.
   * @retval None
   */
 #define __HAL_I2S_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->I2SCFGR |= SPI_I2SCFGR_I2SE)
 #define __HAL_I2S_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->I2SCFGR &=(uint16_t)(~SPI_I2SCFGR_I2SE))
 
 /** @brief  Enable or disable the specified I2S interrupts.
-  * @param  __HANDLE__: specifies the I2S Handle.
-  * @param  __INTERRUPT__: specifies the interrupt source to enable or disable.
+  * @param  __HANDLE__ specifies the I2S Handle.
+  * @param  __INTERRUPT__ specifies the interrupt source to enable or disable.
   *         This parameter can be one of the following values:
   *            @arg I2S_IT_TXE: Tx buffer empty interrupt enable
   *            @arg I2S_IT_RXNE: RX buffer not empty interrupt enable
@@ -335,9 +333,9 @@
 #define __HAL_I2S_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 &=(uint16_t)(~(__INTERRUPT__)))
 
 /** @brief  Checks if the specified I2S interrupt source is enabled or disabled.
-  * @param  __HANDLE__: specifies the I2S Handle.
+  * @param  __HANDLE__ specifies the I2S Handle.
   *         This parameter can be I2S where x: 1, 2, or 3 to select the I2S peripheral.
-  * @param  __INTERRUPT__: specifies the I2S interrupt source to check.
+  * @param  __INTERRUPT__ specifies the I2S interrupt source to check.
   *          This parameter can be one of the following values:
   *            @arg I2S_IT_TXE: Tx buffer empty interrupt enable
   *            @arg I2S_IT_RXNE: RX buffer not empty interrupt enable
@@ -347,8 +345,8 @@
 #define __HAL_I2S_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
 
 /** @brief  Checks whether the specified I2S flag is set or not.
-  * @param  __HANDLE__: specifies the I2S Handle.
-  * @param  __FLAG__: specifies the flag to check.
+  * @param  __HANDLE__ specifies the I2S Handle.
+  * @param  __FLAG__ specifies the flag to check.
   *         This parameter can be one of the following values:
   *            @arg I2S_FLAG_RXNE: Receive buffer not empty flag
   *            @arg I2S_FLAG_TXE: Transmit buffer empty flag
@@ -362,7 +360,7 @@
 #define __HAL_I2S_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
 
 /** @brief Clears the I2S OVR pending flag.
-  * @param  __HANDLE__: specifies the I2S Handle.
+  * @param  __HANDLE__ specifies the I2S Handle.
   * @retval None
   */
 #define __HAL_I2S_CLEAR_OVRFLAG(__HANDLE__)     \
@@ -374,7 +372,7 @@
   } while(0)
 
 /** @brief Clears the I2S UDR pending flag.
-  * @param  __HANDLE__: specifies the I2S Handle.
+  * @param  __HANDLE__ specifies the I2S Handle.
   * @retval None
   */
 #define __HAL_I2S_CLEAR_UDRFLAG(__HANDLE__)     \