Diff: TARGET_ARM_MPS2_M7/TARGET_ARM_SSG/TARGET_MPS2/PinNames.h

Revision:

102:da0ca467f8b5

Child:

116:c0f6e94411f5

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_ARM_MPS2_M7/TARGET_ARM_SSG/TARGET_MPS2/PinNames.h	Wed Jul 08 11:22:30 2015 +0100
@@ -0,0 +1,168 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+		PIN_INPUT,
+		PIN_OUTPUT
+} PinDirection;
+
+#define PORT_SHIFT  5
+
+typedef enum {
+    // MPS2 EXP Pin Names
+		EXP0 = 0,
+		EXP1 = 1,
+		EXP2 = 2,
+		EXP3 = 3,
+		EXP4 = 4,
+		EXP5 = 5,
+		EXP6 = 6,
+		EXP7 = 7,
+		EXP8 = 8,
+		EXP9 = 9,
+		EXP10 = 10,
+		EXP11 = 11,
+		EXP12 = 12,
+		EXP13 = 13,
+		EXP14 = 14,
+		EXP15 = 15,
+		EXP16 = 16,
+		EXP17 = 17,
+		EXP18 = 18,
+		EXP19 = 19,
+		EXP20 = 20,
+		EXP21 = 21,
+		EXP22 = 22,
+		EXP23 = 23,
+		EXP24 = 24,
+		EXP25 = 25,
+		
+		EXP26 = 26,
+		EXP27 = 27,
+		EXP28 = 28,
+		EXP29 = 29,
+		EXP30 = 30,
+		EXP31 = 31,
+		EXP32 = 32, 
+		EXP33 = 33, 
+		EXP34 = 34, 
+		EXP35 = 35, 
+		EXP36 = 36, 
+		EXP37 = 37, 
+		EXP38 = 38, 
+		EXP39 = 39, 
+		EXP40 = 40, 
+		EXP41 = 41, 
+		EXP42 = 42, 
+		EXP43 = 43, 
+		EXP44 = 44, 
+		EXP45 = 45, 
+		EXP46 = 46, 
+		EXP47 = 47, 
+		EXP48 = 48, 
+		EXP49 = 49, 
+		EXP50 = 50, 
+		EXP51 = 51, 
+		
+// Other mbed Pin Names
+
+		//LEDs on mps2
+		//user leds
+		USERLED1 = 100,
+		USERLED2 = 101,
+		//user switches
+		USERSW1  = 110,
+		USERSW2  = 111,
+		
+		//mcc leds
+		LED1 = 200,
+		LED2 = 201,
+		LED3 = 202,
+		LED4 = 203,
+		LED5 = 204,
+		LED6 = 205,
+		LED7 = 206,
+		LED8 = 207,
+		
+		//MCC Switches
+		SW1 = 210,
+		SW2 = 211,
+		SW3 = 212,
+		SW4 = 213,
+		SW5 = 214,
+		SW6 = 215,
+		SW7 = 216,
+		SW8 = 217,
+		
+		//MPS2 SPI header pins j21
+		MOSI_SPI = 300,
+		MISO_SPI = 301,
+		SCLK_SPI = 302,
+		SSEL_SPI = 303,
+		
+		//MPS2 CLCD SPI
+		CLCD_MOSI = 304,
+		CLCD_MISO = 305,
+		CLCD_SCLK = 306,
+		CLCD_SSEL = 307,
+    	CLCD_RESET = 308,
+    	CLCD_RS = 309,
+    	CLCD_RD = 310,
+    	CLCD_BL_CTRL = 311,
+		
+		
+		//MPS2 Uart
+		USBTX  = 400,
+		USBRX  = 401,
+		UART_TX1 = 402,
+		UART_RX1 = 403,
+		UART_TX2 = 404,
+		UART_RX2 = 405,
+		
+		//MPS2 I2C touchscreen and audio
+		TSC_SDA = 500,
+		TSC_SCL = 501,
+		AUD_SDA = 502,
+		AUD_SCL = 503,
+		
+		// Not connected
+		NC = (int)0xFFFFFFFF,
+} PinName;
+
+
+typedef enum {
+    PullUp = 2,
+    PullDown = 1,
+    PullNone = 0,
+    Repeater = 3,
+    OpenDrain = 4,
+    PullDefault = PullDown
+} PinMode;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+